Resources

Triangle △MNO\triangle MNO with vertices M(2,1)M(2, 1), N(5,1)N(5, 1), and O(2,4)O(2, 4) is mapped to △M′N′O′\triangle M'N'O' with vertices M′(1,−2)M'(1, -2), N′(1,−5)N'(1, -5), and O′(4,−2)O'(4, -2). A student claims this was achieved purely through a single clockwise rotation of 90∘90^\circ about the origin, which would preserve clockwise orientation of vertices. Determine the true determinant of the underlying linear transformation matrix, identify whether the transformation preserves or reverses orientation, and find the correct single reflection line y=mx+by = mx + b that achieves this congruence mapping.

Answer and steps

Final answer

The mapping (x,y)↦(y,−x)(x, y) \mapsto (y, -x) corresponds to the matrix (01−10)\begin{pmatrix} 0 & 1 \\ -1 & 0 \end{pmatrix}, which has determinant det⁡=0−(−1)=1\det = 0 - (-1) = 1 and represents a clockwise rotation of 90∘90^\circ about the origin. However, checking vertex ordering shows: M→N→OM \to N \to O is counterclockwise in △MNO\triangle MNO, and M′→N′→O′M' \to N' \to O' is clockwise in △M′N′O′\triangle M'N'O'. The mapping is orientation-preserving in the plane, but if the intended mapping was a reflection across y=−xy = -x, the rule would be (x,y)↦(−y,−x)(x, y) \mapsto (-y, -x) with det⁡=−1\det = -1. Because (x,y)↦(y,−x)(x, y) \mapsto (y, -x) has determinant +1+1, it is strictly a rotation by −90∘-90^\circ (270∘270^\circ counterclockwise) and cannot be represented by any single line reflection.

Steps

01

Identify the Coordinate Rule

Compare the coordinates of the original vertices to the transformed vertices:

  • M(2,1)→M′(1,−2)M(2, 1) \to M'(1, -2)
  • N(5,1)→N′(1,−5)N(5, 1) \to N'(1, -5)
  • O(2,4)→O′(4,−2)O(2, 4) \to O'(4, -2)

Notice that in every case, the new xx-coordinate is the old yy-coordinate, and the new yy-coordinate is the negative of the old xx-coordinate: (x,y)↦(y,−x)(x, y) \mapsto (y, -x)


02

Form the Transformation Matrix and Calculate its Determinant

Write the mapping in matrix form: (x′y′)=(01−10)(xy)=(y−x)\begin{pmatrix} x' \\ y' \end{pmatrix} = \begin{pmatrix} 0 & 1 \\ -1 & 0 \end{pmatrix} \begin{pmatrix} x \\ y \end{pmatrix} = \begin{pmatrix} y \\ -x \end{pmatrix}

Calculate the determinant of this linear transformation matrix: det⁡(01−10)=(0)(0)−(1)(−1)=1\det \begin{pmatrix} 0 & 1 \\ -1 & 0 \end{pmatrix} = (0)(0) - (1)(-1) = 1


03

Determine Orientation Preservation

  • A transformation with a positive determinant (det⁡>0\det > 0) is orientation-preserving (it is a proper rigid motion / pure rotation).
  • A transformation with a negative determinant (det⁡<0\det < 0) is orientation-reversing (such as a reflection or glide reflection).

Since det⁡=1\det = 1, the transformation is orientation-preserving in the plane. It corresponds geometrically to a pure clockwise rotation of 90∘90^\circ (or 270∘270^\circ counterclockwise) around the origin.

(Pitfall note: While a cyclic reading of the labeled vertices might change apparent handedness if the cycle order reverses, the spatial transformation itself has determinant +1+1, which means the plane as a whole does not get flipped or reflected.)


04

Determine if a Single Reflection Line Exists

Every reflection across a straight line y=mx+by = mx + b is an improper isometry with determinant: det⁡=−1\det = -1

Because the actual mapping has det⁡=+1\det = +1, it cannot be produced by any single line reflection.

If the mapping were instead a reflection across the line y=−xy = -x, the coordinate rule would be (x,y)↦(−y,−x)(x, y) \mapsto (-y, -x), with matrix (0−1−10)\begin{pmatrix} 0 & -1 \\ -1 & 0 \end{pmatrix} and determinant −1-1. However, for the given vertices (x,y)↦(y,−x)(x, y) \mapsto (y, -x), no single reflection line exists.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misremembers the reflection determinant formula as positive and mistakes the clockwise rotation for a reflection across the line y = -x.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Matrix TT maps (x,y)(x, y) to (y,−x)(y, -x): T=[01−10]T = \begin{bmatrix} 0 & 1 \\ -1 & 0 \end{bmatrix}

  2. Step 2

    det⁡(T)=(0)(0)−(1)(−1)=1\det(T) = (0)(0) - (1)(-1) = 1

  3. Step 3

    det⁡(T)=1>0\det(T) = 1 > 0, so orientation is preserved.

  4. Step 4

    (x,y)→(y,−x)(x, y) \to (y, -x) swaps coordinates with a sign change.   ⟹  \implies Reflection line is y=−xy = -x.

    Correct

    Because det⁡(T)=1≠−1\det(T) = 1 \neq -1, this transformation is a pure rotation and no single reflection line exists.

    A reflection across a line always reverses orientation with determinant det⁡=−1\det = -1. Reflection across y=−xy = -x follows (x,y)↦(−y,−x)(x, y) \mapsto (-y, -x), not (y,−x)(y, -x).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly matched vertex coordinates to establish the transformation rule (x,y)↦(y,−x)(x, y) \mapsto (y, -x).

You accurately built the transformation matrix and calculated its determinant as 11.

You correctly linked a positive determinant to the preservation of orientation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing rotation with reflection

You assumed that swapping coordinates with a single sign change represents a reflection across y=−xy = -x.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked that any single line reflection is an improper isometry requiring det⁡=−1\det = -1, whereas the given mapping has det⁡=+1\det = +1, making it a pure rotation of 90∘90^\circ clockwise for which no single reflection line exists.

REASONING PATH
Your ACEpath teacher’s suggested approach
Determinant of an Isometry
  • In R2\mathbb{R}^2, a pure rotation has det⁡=+1\det = +1 (orientation-preserving), whereas every single line reflection has det⁡=−1\det = -1 (orientation-reversing).

  • Check the determinant before searching for a reflection line; if det⁡=+1\det = +1, conclude immediately that no single reflection can produce the mapping.

Reflection Across $y = -x$
  • Reflecting across y=−xy = -x swaps and negates both coordinates: (x,y)↦(−y,−x)(x, y) \mapsto (-y, -x), yielding matrix (0−1−10)\begin{pmatrix} 0 & -1 \\ -1 & 0 \end{pmatrix} with det⁡=−1\det = -1.

  • Differentiate between (y,−x)(y, -x) (a 90∘90^\circ clockwise rotation) and (−y,−x)(-y, -x) (reflection across y=−xy = -x).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that every line reflection in the plane has det⁡=−1\det = -1.

  2. Compare the required determinant of a reflection (−1-1) with the matrix determinant (+1+1).

  3. Conclude that because the mapping is a pure 90∘90^\circ clockwise rotation, it cannot be produced by any single line reflection.

Final answer

The determinant is 11, orientation is preserved, and no single reflection line exists.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the coordinate rules for standard reflections: across y=xy = x is (y,x)(y, x) and across y=−xy = -x is (−y,−x)(-y, -x).

  • Always verify whether an isometry is proper (rotation, det⁡=+1\det = +1) or improper (reflection, det⁡=−1\det = -1) before identifying the geometric type.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly calculates the determinant using ad + bc instead of ad - bc, concluding the determinant is -1 and therefore orientation is reversed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Mapping: (x,y)→(y,−x)  ⟹  Matrix=[01−10](x, y) \to (y, -x) \implies \text{Matrix} = \begin{bmatrix} 0 & 1 \\ -1 & 0 \end{bmatrix}

  2. Step 2

    det⁡=(0)(0)+(1)(−1)=−1\det = (0)(0) + (1)(-1) = -1

    Correct

    det⁡=(0)(0)−(1)(−1)=0−(−1)=1\det = (0)(0) - (1)(-1) = 0 - (-1) = 1

    You added the cross-products instead of subtracting them. The formula for the determinant of a 2×22 \times 2 matrix (abcd)\begin{pmatrix} a & b \\ c & d \end{pmatrix} is ad−bcad - bc.

  3. Step 3

    Since det⁡=−1<0\det = -1 < 0, the transformation reverses orientation.

    Correct

    Since det⁡=1>0\det = 1 > 0, the transformation preserves orientation.

    Because your calculated determinant was negative, you concluded the mapping reverses orientation. With the correct determinant of +1+1, the transformation is orientation-preserving.

  4. Step 4

    Midpoint of M(2,1)M(2,1) and M′(1,−2)M'(1,-2) is (1.5,−0.5)  ⟹  (1.5, -0.5) \implies Slope of MM′MM' is −2−11−2=3  ⟹  \frac{-2-1}{1-2} = 3 \implies Perpendicular bisector slope is m=−13  ⟹  −0.5=(−13)(1.5)+bm = -\frac{1}{3} \implies -0.5 = (-\frac{1}{3})(1.5) + b gives b=0  ⟹  b = 0 \implies Reflection line is y=−13xy = -\frac{1}{3}x.

    Correct

    No single line reflection exists because every line reflection has determinant −1-1, whereas this mapping has det⁡=+1\det = +1.

    Because the true determinant is +1+1, this transformation is a pure rotation of 90∘90^\circ clockwise (270∘270^\circ counterclockwise). A single reflection always has det⁡=−1\det = -1, so no line reflection can produce this mapping.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the algebraic mapping rule (x,y)↦(y,−x)(x, y) \mapsto (y, -x) from the vertex coordinates.

You correctly formed the linear transformation matrix representing that rule.

You correctly set up the perpendicular bisector method for finding a candidate mirror line.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Determinant Formula Sign Error

You used an addition sign instead of subtraction between the diagonal products: (0)(0)+(1)(−1)(0)(0) + (1)(-1) instead of (0)(0)−(1)(−1)(0)(0) - (1)(-1).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the 2×22 \times 2 determinant formula det⁡(A)=ad−bc\det(A) = ad - bc with an additive combination (ad+bcad + bc), which flipped the sign of the determinant from +1+1 to −1-1 and triggered downstream false conclusions about orientation and reflections.

REASONING PATH
Your ACEpath teacher’s suggested approach
2x2 Determinant Formula
  • For matrix A=(abcd)A = \begin{pmatrix} a & b \\ c & d \end{pmatrix}, det⁡(A)=ad−bc\det(A) = ad - bc.

  • Always write down the subtraction sign explicitly before multiplying the off-diagonal terms: a⋅d−(b⋅c)a \cdot d - (b \cdot c).

Rigid Motion Determinant Classification
  • Planar isometries with det⁡=+1\det = +1 are pure rotations or translations (proper, preserve orientation). Planar isometries with det⁡=−1\det = -1 are reflections or glide reflections (improper, reverse orientation).

  • Check the determinant first: if det⁡=+1\det = +1, conclude immediately that no single line reflection can represent the isometry.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard determinant formula det⁡=ad−bc\det = ad - bc to (01−10)\begin{pmatrix} 0 & 1 \\ -1 & 0 \end{pmatrix}:

  2. det⁡=(0)(0)−(1)(−1)=0−(−1)=1\det = (0)(0) - (1)(-1) = 0 - (-1) = 1.

  3. Because det⁡=1>0\det = 1 > 0, the transformation preserves planar orientation.

  4. Every single line reflection is an improper isometry with determinant −1-1.

  5. Since the mapping has det⁡=1\det = 1, no single reflection line y=mx+by = mx + b exists that can achieve this transformation.

Final answer

The determinant is 11; the transformation preserves orientation; no single reflection line exists.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review and memorize the determinant formula det⁡(abcd)=ad−bc\det\begin{pmatrix} a & b \\ c & d \end{pmatrix} = ad - bc.

  • Practice computing determinants where off-diagonal entries have negative signs to reinforce handling double negatives.

  • Remember that a transformation with determinant +1+1 is orientation-preserving and cannot be achieved by an odd number of reflections.

Lock it in

Similar question

01

A transformation maps (x,y)↦(−x,y)(x, y) \mapsto (-x, y). Write its transformation matrix, evaluate its determinant, and identify whether it is a rotation or a reflection.

Answer

Matrix: (−1001)\begin{pmatrix} -1 & 0 \\ 0 & 1 \end{pmatrix}. Determinant: (−1)(1)−(0)(0)=−1(-1)(1) - (0)(0) = -1. Because det⁡=−1\det = -1, it reverses orientation and is a reflection across the yy-axis.

02

Triangle △ABC\triangle ABC is mapped to △A′B′C′\triangle A'B'C' by (x,y)↦(−y,−x)(x, y) \mapsto (-y, -x). Find the determinant of the transformation matrix and determine the exact line of reflection, if one exists.

Answer

Matrix: (0−1−10)\begin{pmatrix} 0 & -1 \\ -1 & 0 \end{pmatrix}. Determinant: (0)(0)−(−1)(−1)=−1(0)(0) - (-1)(-1) = -1. Since det⁡=−1\det = -1 and points on y=−xy = -x are invariant, it is a single reflection across the line y=−xy = -x.

03

Suppose a linear isometry maps (1,0)↦(0,−1)(1, 0) \mapsto (0, -1) and (0,1)↦(−1,0)(0, 1) \mapsto (-1, 0). Determine its determinant, state whether it preserves orientation, and identify the single transformation (including its specific parameters) that describes this mapping.

Answer

Matrix: (0−1−10)\begin{pmatrix} 0 & -1 \\ -1 & 0 \end{pmatrix}. Determinant: −1-1. Because det⁡=−1\det = -1, it reverses orientation. It is a single reflection across the line y=−xy = -x.

Loading workspace…