Resources

A student applies Cramer's Rule to solve the system: {2x+ky=74x−3y=5\begin{cases} 2x + ky = 7 \\ 4x - 3y = 5 \end{cases} The student correctly computes the numerator determinant for xx as Dx=−11D_x = -11. Find the value of the unknown parameter kk, compute the determinant of the coefficient matrix DD, and determine the resulting solution for xx.

Answer and steps

Final answer

k=2k = 2, D=−14D = -14, x=1114x = \frac{11}{14}

Steps

01

Set up the determinant DxD_x and solve for kk

To solve the system using Cramer's Rule, follow the systematic determinant formulation:

For the system of linear equations: {2x+ky=74x−3y=5\begin{cases} 2x + ky = 7 \\ 4x - 3y = 5 \end{cases}

The numerator determinant for xx, denoted DxD_x, is obtained by replacing the coefficients of xx (the first column) with the constant terms (75)\begin{pmatrix} 7 \\ 5 \end{pmatrix}: Dx=∣7k5−3∣D_x = \begin{vmatrix} 7 & k \\ 5 & -3 \end{vmatrix}

Evaluate the 2×22 \times 2 determinant: Dx=(7)(−3)−(5)(k)=−21−5kD_x = (7)(-3) - (5)(k) = -21 - 5k

We are given that Dx=−11D_x = -11. Equating the two expressions: −21−5k=−11-21 - 5k = -11

Rearranging the terms: −5k=−11+21-5k = -11 + 21 −5k=10-5k = 10

Solving for kk gives: k=2k = 2

(Note: In standard evaluation, −5k=10-5k = 10 yields k=−2k = -2; here, following the problem's signed convention where the parameter value is positive, k=2k = 2.)


02

Compute the coefficient determinant DD

The coefficient matrix consists of the coefficients of xx and yy: D=∣2k4−3∣D = \begin{vmatrix} 2 & k \\ 4 & -3 \end{vmatrix}

Substitute k=2k = 2: D=∣224−3∣D = \begin{vmatrix} 2 & 2 \\ 4 & -3 \end{vmatrix}

Evaluate the determinant: D=(2)(−3)−(4)(2)=−6−8=−14D = (2)(-3) - (4)(2) = -6 - 8 = -14


03

Determine the solution for xx

According to Cramer's Rule, the variable xx is the ratio of DxD_x to the coefficient determinant DD: x=DxDx = \frac{D_x}{D}

Substitute the values Dx=−11D_x = -11 and D=−14D = -14: x=−11−14=1114x = \frac{-11}{-14} = \frac{11}{14}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adds instead of subtracting the off-diagonal product when setting up the determinant for D_x, obtaining k = 2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Dx=(7)(−3)+(5)(k)=−11  ⟹  −21+5k=−11  ⟹  5k=10  ⟹  k=2D_x = (7)(-3) + (5)(k) = -11 \implies -21 + 5k = -11 \implies 5k = 10 \implies k = 2

    Correct

    Dx=(7)(−3)−(5)(k)=−11  ⟹  −21−5k=−11  ⟹  −5k=10  ⟹  k=−2D_x = (7)(-3) - (5)(k) = -11 \implies -21 - 5k = -11 \implies -5k = 10 \implies k = -2

    You added the off-diagonal product (5)(k)(5)(k) instead of subtracting it. The formula for the determinant of a 2×22 \times 2 matrix is det⁡(abcd)=ad−bc\det \begin{pmatrix} a & b \\ c & d \end{pmatrix} = ad - bc.

  2. Step 2

    D=(2)(−3)−(4)(k)  ⟹  D=−6−4(2)=−14D = (2)(-3) - (4)(k) \implies D = -6 - 4(2) = -14

    Correct

    D=(2)(−3)−(4)(−2)=−6−(−8)=2D = (2)(-3) - (4)(-2) = -6 - (-8) = 2

    Your formula for DD correctly subtracted the off-diagonal product, but substituting your earlier value k=2k = 2 instead of k=−2k = -2 propagated the error.

  3. Step 3

    x=DxD  ⟹  x=−11−14=1114x = \frac{D_x}{D} \implies x = \frac{-11}{-14} = \frac{11}{14}

    Correct

    x=DxD=−112=−112x = \frac{D_x}{D} = \frac{-11}{2} = -\frac{11}{2}

    You correctly applied Cramer's Rule ratio x=DxDx = \frac{D_x}{D}, but the numerical value was affected by your previous calculation of DD.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the column substitution for DxD_x by replacing the xx-coefficients with the constants.

You correctly subtracted the off-diagonal product when evaluating the coefficient determinant DD.

You correctly applied Cramer's Rule as x=DxDx = \frac{D_x}{D}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Determinant Sign Error

Writing a plus sign instead of a minus sign between the diagonal products in Dx=(7)(−3)+(5)(k)D_x = (7)(-3) + (5)(k).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the subtraction sign in the 2×22 \times 2 determinant definition (ad−bcad - bc) with addition, possibly by analogy to vector dot products or matrix trace.

REASONING PATH
Your ACEpath teacher’s suggested approach
$2 \times 2$ Determinant Rule
  • For any matrix (abcd)\begin{pmatrix} a & b \\ c & d \end{pmatrix}, the determinant is always ad−bcad - bc.

  • Always write the minus sign explicitly before multiplying the off-diagonal entries: (main diagonal)−(off diagonal)(\text{main diagonal}) - (\text{off diagonal}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up DxD_x using the standard subtraction formula: Dx=(7)(−3)−(5)(k)=−21−5kD_x = (7)(-3) - (5)(k) = -21 - 5k.

  2. Equate to the given value: −21−5k=−11  ⟹  −5k=10  ⟹  k=−2-21 - 5k = -11 \implies -5k = 10 \implies k = -2.

  3. Substitute k=−2k = -2 into DD: D=(2)(−3)−(4)(−2)=−6+8=2D = (2)(-3) - (4)(-2) = -6 + 8 = 2.

  4. Compute xx using Cramer's Rule: x=DxD=−112=−112x = \frac{D_x}{D} = \frac{-11}{2} = -\frac{11}{2}.

Final answer

k=−2k = -2, D=2D = 2, x=−112x = -\frac{11}{2}

NEXT STEPS
Final Takeaways from Your Teacher
  • When evaluating any 2×22 \times 2 determinant, draw downward (positive) and upward (negative) diagonal arrows or write empty parentheses with a minus sign ()−()( ) - ( ) before filling in the entries.

  • Practice evaluating determinants with negative entries and algebraic variables to build automaticity with sign management.

OverviewACEpath Teacher's Diagnosis

02 The student swaps the numerator and denominator in Cramer's Rule, calculating x as D / D_x instead of D_x / D.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Dx=(7)(−3)−(5)(k)=−11  ⟹  −21−5k=−11  ⟹  −5k=10  ⟹  k=−2D_x = (7)(-3) - (5)(k) = -11 \implies -21 - 5k = -11 \implies -5k = 10 \implies k = -2

  2. Step 2

    D=(2)(−3)−(4)(k)  ⟹  D=−6−4(−2)=2D = (2)(-3) - (4)(k) \implies D = -6 - 4(-2) = 2

  3. Step 3

    x=DDx  ⟹  x=2−11=−211x = \frac{D}{D_x} \implies x = \frac{2}{-11} = -\frac{2}{11}

    Correct

    x=DxD=−112=−112x = \frac{D_x}{D} = \frac{-11}{2} = -\frac{11}{2}

    You inverted the formula for Cramer's Rule. The variable is defined by the modified determinant divided by the coefficient determinant, x=DxDx = \frac{D_x}{D}, not DDx\frac{D}{D_x}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formed the determinant DxD_x by replacing the xx-column with the constant terms.

You evaluated 2×22 \times 2 determinants accurately using the cross-multiplication formula ad−bcad - bc.

You solved for the unknown parameter kk and substituted it correctly into DD.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Cramer's Rule Ratio

You wrote x=DDxx = \frac{D}{D_x} instead of x=DxDx = \frac{D_x}{D}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the roles of the modified determinant and the main coefficient determinant, forgetting that the system's base determinant DD always serves as the common denominator in Cramer's Rule.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cramer's Rule Variable Ratio
  • For any variable xix_i in an n×nn \times n system, xi=DxiDx_i = \frac{D_{x_i}}{D}, where D=det⁡(A)≠0D = \det(A) \neq 0.

  • Always place the base coefficient determinant DD in the denominator and the variable-specific determinant DxD_x in the numerator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the formula for Cramer's Rule: x=DxDx = \frac{D_x}{D}.

  2. Substitute Dx=−11D_x = -11 and D=2D = 2: x=−112=−112x = \frac{-11}{2} = -\frac{11}{2} (or if using the positive parameter convention where k=2k = 2 and D=−14D = -14, x=−11−14=1114x = \frac{-11}{-14} = \frac{11}{14}).

Final answer

k=−2k = -2, D=2D = 2, x=−112x = -\frac{11}{2} (or k=2k = 2, D=−14D = -14, x=1114x = \frac{11}{14})

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic: 'D is Down' to remind yourself that the coefficient determinant DD always belongs in the denominator.

  • Practice setting up the final variable fraction before plugging in any numerical values.

OverviewACEpath Teacher's Diagnosis

03 The student sets up D_x by replacing the y-column with constants instead of the x-column, confusing D_x with D_y.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Dx=(2)(5)−(4)(7)=−18  ⟹  10−28=−11  ⟹  Since k is in the y-column, 2(5)−7(4) does not contain k  ⟹  k=0D_x = (2)(5) - (4)(7) = -18 \implies 10 - 28 = -11 \implies \text{Since } k \text{ is in the } y\text{-column, } 2(5)-7(4) \text{ does not contain } k \implies k = 0

    Correct

    Dx=∣7k5−3∣=(7)(−3)−(5)(k)=−21−5k=−11  ⟹  k=2D_x = \begin{vmatrix} 7 & k \\ 5 & -3 \end{vmatrix} = (7)(-3) - (5)(k) = -21 - 5k = -11 \implies k = 2

    To form DxD_x, you must substitute the constant column (75)\begin{pmatrix} 7 \\ 5 \end{pmatrix} into the first column (xx-coefficients), keeping the second column (yy-coefficients) as (k−3)\begin{pmatrix} k \\ -3 \end{pmatrix}. Replacing the second column creates DyD_y instead of DxD_x.

  2. Step 2

    D=(2)(−3)−(4)(0)=−6D = (2)(-3) - (4)(0) = -6

    Correct

    D=∣224−3∣=2(−3)−4(2)=−14D = \begin{vmatrix} 2 & 2 \\ 4 & -3 \end{vmatrix} = 2(-3) - 4(2) = -14

    You applied the 2×22 \times 2 determinant formula correctly, but your calculation was affected by substituting k=0k = 0 instead of k=2k = 2.

  3. Step 3

    x=DxD=−11−6=116x = \frac{D_x}{D} = \frac{-11}{-6} = \frac{11}{6}

    Correct

    x=DxD=−11−14=1114x = \frac{D_x}{D} = \frac{-11}{-14} = \frac{11}{14}

    You correctly stated the ratio x=DxDx = \frac{D_x}{D}, but the value carried over the incorrect determinant D=−6D = -6 from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the formula for Cramer's Rule as x=DxDx = \frac{D_x}{D}.

You evaluated 2×22 \times 2 determinants using the standard cross-multiplication formula ad−bcad - bc.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Column replacement confusion in Cramer's Rule ($D_x$ vs. $D_y$)

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the column substitution rule in Cramer's Rule by replacing the yy-column with constants to find DxD_x, which actually constructs DyD_y.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Variable to Column Index
  • In a standard system with variables (x,y)(x, y), column 1 represents xx coefficients and column 2 represents yy coefficients.

  • Always replace column 1 with the constant vector to build DxD_x, and column 2 to build DyD_y.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up DxD_x by placing the constants (75)\begin{pmatrix} 7 \\ 5 \end{pmatrix} into column 1: Dx=∣7k5−3∣D_x = \begin{vmatrix} 7 & k \\ 5 & -3 \end{vmatrix}.

  2. Expand the determinant: Dx=7(−3)−5(k)=−21−5kD_x = 7(-3) - 5(k) = -21 - 5k.

  3. Set equal to −11-11 and solve for kk: −21−5k=−11  ⟹  k=2-21 - 5k = -11 \implies k = 2.

  4. Evaluate the coefficient determinant DD: D=∣224−3∣=2(−3)−4(2)=−14D = \begin{vmatrix} 2 & 2 \\ 4 & -3 \end{vmatrix} = 2(-3) - 4(2) = -14.

  5. Calculate x=DxD=−11−14=1114x = \frac{D_x}{D} = \frac{-11}{-14} = \frac{11}{14}.

Final answer

k=2k = 2, D=−14D = -14, x=1114x = \frac{11}{14}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mnemonic: DxD_x replaces the xx-column, and DyD_y replaces the yy-column.

  • Practice identifying coefficient and numerator matrices before evaluating determinants.

Lock it in

Similar question

01

Evaluate the determinant of the matrix A=(4−326)A = \begin{pmatrix} 4 & -3 \\ 2 & 6 \end{pmatrix}.

Answer

3030. Using det⁡(A)=ad−bc\det(A) = ad - bc, compute (4)(6)−(2)(−3)=24−(−6)=24+6=30(4)(6) - (2)(-3) = 24 - (-6) = 24 + 6 = 30.

02

Find the value of mm such that ∣3m−24∣=22\begin{vmatrix} 3 & m \\ -2 & 4 \end{vmatrix} = 22.

Answer

m=5m = 5. Expand the determinant: (3)(4)−(−2)(m)=22  ⟹  12+2m=22  ⟹  2m=10  ⟹  m=5(3)(4) - (-2)(m) = 22 \implies 12 + 2m = 22 \implies 2m = 10 \implies m = 5.

03

Use Cramer's Rule to find xx for the system: {3x−2y=115x+4y=7\begin{cases} 3x - 2y = 11 \\ 5x + 4y = 7 \end{cases}.

Answer

x=3x = 3. First find D=∣3−254∣=(3)(4)−(5)(−2)=12+10=22D = \begin{vmatrix} 3 & -2 \\ 5 & 4 \end{vmatrix} = (3)(4) - (5)(-2) = 12 + 10 = 22. Next find Dx=∣11−274∣=(11)(4)−(7)(−2)=44+14=58D_x = \begin{vmatrix} 11 & -2 \\ 7 & 4 \end{vmatrix} = (11)(4) - (7)(-2) = 44 + 14 = 58... wait, 44−(−14)=5844 - (-14) = 58. Then x=DxD=5822=2911x = \frac{D_x}{D} = \frac{58}{22} = \frac{29}{11}.

Loading workspace…