Resources

In enzyme kinetics, the initial reaction velocity vv as a function of substrate concentration [S][S] (in μM\mu\text{M}) is expressed by the rational Michaelis-Menten representation v([S])=Vmax⁡[S]Km+[S]v([S]) = \frac{V_{\max} [S]}{K_m + [S]}, with Vmax⁡=120 nmol/(L⋅s)V_{\max} = 120\text{ nmol}/(\text{L}\cdot\text{s}) and Km=15 μMK_m = 15\text{ }\mu\text{M}. Identify the equations of the horizontal and vertical asymptotes of the graph of v([S])v([S]), state the mathematical limit lim⁡[S]→∞v([S])\lim_{[S] \to \infty} v([S]), and construct the Lineweaver-Burk linear reciprocal representation 1v=m(1[S])+b\frac{1}{v} = m \left(\frac{1}{[S]}\right) + b, specifying the exact values of the slope mm and the vertical intercept bb.

Answer and steps

Final answer

Horizontal asymptote: v=120v = 120; Vertical asymptote: [S]=−15[S] = -15; Asymptotic limit: lim⁡[S]→∞v([S])=120 nmol/(L⋅s)\lim_{[S] \to \infty} v([S]) = 120\text{ nmol}/(\text{L}\cdot\text{s}); Reciprocal linear equation: 1v=18(1[S])+1120≈0.125(1[S])+0.00833\frac{1}{v} = \frac{1}{8}\left(\frac{1}{[S]}\right) + \frac{1}{120} \approx 0.125\left(\frac{1}{[S]}\right) + 0.00833 (with slope m=0.125 μM⋅s⋅L/nmolm = 0.125\text{ }\mu\text{M}\cdot\text{s}\cdot\text{L}/\text{nmol} and intercept b=1120 s⋅L/nmolb = \frac{1}{120}\text{ s}\cdot\text{L}/\text{nmol}).

Steps

01

Substitute the Known Parameters into the Rational Function

Substitute the given maximum velocity Vmax⁡=120 nmol/(L⋅s)V_{\max} = 120\text{ nmol}/(\text{L}\cdot\text{s}) and Michaelis constant Km=15 μMK_m = 15\text{ }\mu\text{M} into the Michaelis-Menten rate equation:

v([S])=120[S]15+[S]v([S]) = \frac{120 [S]}{15 + [S]}


02

Determine the Asymptotes and the Asymptotic Limit

  1. Vertical Asymptote: A rational function has a vertical asymptote where its denominator equals zero (and the numerator is non-zero). Set the denominator equal to zero: 15+[S]=0  ⟹  [S]=−1515 + [S] = 0 \implies [S] = -15 Therefore, the equation of the vertical asymptote is [S]=−15[S] = -15.
  2. Horizontal Asymptote and Limit as [S]→∞[S] \to \infty: To find the behavior as substrate concentration becomes very large, divide the numerator and denominator by [S][S]: lim⁡[S]→∞v([S])=lim⁡[S]→∞1201+15[S]=1201+0=120 nmol/(L⋅s)\lim_{[S] \to \infty} v([S]) = \lim_{[S] \to \infty} \frac{120}{1 + \frac{15}{[S]}} = \frac{120}{1 + 0} = 120\text{ nmol}/(\text{L}\cdot\text{s}) Because the degree of the numerator equals the degree of the denominator, the horizontal asymptote is the ratio of their leading coefficients: v=120v = 120

03

Derive the Lineweaver-Burk Linear Reciprocal Form

To transform the hyperbolic curve into a linear relationship, take the reciprocal of both sides of the rate equation:

1v=Km+[S]Vmax⁡[S]\frac{1}{v} = \frac{K_m + [S]}{V_{\max} [S]}

Separate the numerator into two fractions:

1v=KmVmax⁡[S]+[S]Vmax⁡[S]=(KmVmax⁡)(1[S])+1Vmax⁡\frac{1}{v} = \frac{K_m}{V_{\max} [S]} + \frac{[S]}{V_{\max} [S]} = \left(\frac{K_m}{V_{\max}}\right) \left(\frac{1}{[S]}\right) + \frac{1}{V_{\max}}

This matches the slope-intercept form y=mx+by = m x + b, where y=1vy = \frac{1}{v} and x=1[S]x = \frac{1}{[S]}.


04

Calculate the Slope and Intercept

  1. Slope (mm): m=KmVmax⁡=15120=18=0.125 μM⋅s⋅L/nmolm = \frac{K_m}{V_{\max}} = \frac{15}{120} = \frac{1}{8} = 0.125\text{ }\mu\text{M}\cdot\text{s}\cdot\text{L}/\text{nmol}
  2. Vertical Intercept (bb): b=1Vmax⁡=1120≈0.00833 s⋅L/nmolb = \frac{1}{V_{\max}} = \frac{1}{120} \approx 0.00833\text{ s}\cdot\text{L}/\text{nmol}

Thus, the linear reciprocal equation is: 1v=18(1[S])+1120≈0.125(1[S])+0.00833\frac{1}{v} = \frac{1}{8}\left(\frac{1}{[S]}\right) + \frac{1}{120} \approx 0.125\left(\frac{1}{[S]}\right) + 0.00833

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the slope and intercept of the Lineweaver-Burk plot by directly taking the reciprocal of each term instead of properly splitting the fraction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Horizontal asymptote: v=120v = 120 Vertical asymptote: [S]=−15[S] = -15 lim⁡[S]→∞120[S]15+[S]=120\lim_{[S] \to \infty} \frac{120[S]}{15 + [S]} = 120

  2. Step 2

    1v=15+[S]120[S]  ⟹  1v=15120[S]+[S]120[S]  ⟹  1v=15120(1[S])+1120\frac{1}{v} = \frac{15 + [S]}{120[S]} \implies \frac{1}{v} = \frac{15}{120[S]} + \frac{[S]}{120[S]} \implies \frac{1}{v} = \frac{15}{120}\left(\frac{1}{[S]}\right) + \frac{1}{120}

  3. Step 3

    m=1120 and b=18m = \frac{1}{120}\text{ and } b = \frac{1}{8}

    Correct

    m=15120=18=0.125 μM⋅s⋅L/nmol and b=1120≈0.00833 s⋅L/nmolm = \frac{15}{120} = \frac{1}{8} = 0.125\text{ }\mu\text{M}\cdot\text{s}\cdot\text{L}/\text{nmol}\text{ and } b = \frac{1}{120} \approx 0.00833\text{ s}\cdot\text{L}/\text{nmol}

    In the linear equation y=mx+by = mx + b with y=1vy = \frac{1}{v} and x=1[S]x = \frac{1}{[S]}, the slope mm is the coefficient multiplying 1[S]\frac{1}{[S]}, which is 15120=18\frac{15}{120} = \frac{1}{8}, and the constant term is the vertical intercept b=1120b = \frac{1}{120}. You reversed these two values.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the vertical asymptote at [S]=−15[S] = -15 and the horizontal asymptote at v=120v = 120.

You evaluated the limit at infinity accurately as 120120.

You properly separated the terms in the numerator to produce the correct reciprocal equation 1v=15120(1[S])+1120\frac{1}{v} = \frac{15}{120}\left(\frac{1}{[S]}\right) + \frac{1}{120}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear Parameter Misidentification

You accidentally interchanged the coefficient of the independent variable with the constant term when reading mm and bb.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When matching 1v=15120(1[S])+1120\frac{1}{v} = \frac{15}{120}\left(\frac{1}{[S]}\right) + \frac{1}{120} to the slope-intercept form y=mx+by = mx + b, you associated the simplified fraction 15120=18\frac{15}{120} = \frac{1}{8} with bb and the constant term 1120\frac{1}{120} with mm, rather than identifying the slope as the coefficient attached to the reciprocal variable 1[S]\frac{1}{[S]}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mapping Variables to Slope-Intercept Form
  • In any linear relation y=mx+by = mx + b, the slope mm is always the coefficient multiplying the independent variable xx, while bb is the isolated constant term.

  • Explicitly underline or label x=1[S]x = \frac{1}{[S]} in your expression before assigning mm to its multiplier and bb to the remaining constant.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare 1v=15120(1[S])+1120\frac{1}{v} = \frac{15}{120}\left(\frac{1}{[S]}\right) + \frac{1}{120} directly to y=mx+by = mx + b, where y=1vy = \frac{1}{v} and x=1[S]x = \frac{1}{[S]}.

  2. Identify the slope mm as the coefficient of 1[S]\frac{1}{[S]}: m=15120=18=0.125 μM⋅s⋅L/nmolm = \frac{15}{120} = \frac{1}{8} = 0.125\text{ }\mu\text{M}\cdot\text{s}\cdot\text{L}/\text{nmol}.

  3. Identify the vertical intercept bb as the constant term: b=1120≈0.00833 s⋅L/nmolb = \frac{1}{120} \approx 0.00833\text{ s}\cdot\text{L}/\text{nmol}.

Final answer

Horizontal asymptote: v=120v = 120; Vertical asymptote: [S]=−15[S] = -15; Asymptotic limit: lim⁡[S]→∞v([S])=120 nmol/(L⋅s)\lim_{[S] \to \infty} v([S]) = 120\text{ nmol}/(\text{L}\cdot\text{s}); Reciprocal linear equation: 1v=18(1[S])+1120\frac{1}{v} = \frac{1}{8}\left(\frac{1}{[S]}\right) + \frac{1}{120} (with slope m=18=0.125 μM⋅s⋅L/nmolm = \frac{1}{8} = 0.125\text{ }\mu\text{M}\cdot\text{s}\cdot\text{L}/\text{nmol} and intercept b=1120≈0.00833 s⋅L/nmolb = \frac{1}{120} \approx 0.00833\text{ s}\cdot\text{L}/\text{nmol})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice explicitly writing y=mx+by = mx + b underneath your linearized equation and drawing arrows from mm to the variable coefficient and from bb to the constant term.

  • Double-check physical units: slope has units of y-unitx-unit\frac{y\text{-unit}}{x\text{-unit}}, which equals 1/v1/[S]=[S]v\frac{1/v}{1/[S]} = \frac{[S]}{v}, matching KmVmax⁡\frac{K_m}{V_{\max}}.

OverviewACEpath Teacher's Diagnosis

02 The student forgets that the vertical asymptote corresponds to the zero of the denominator [S] = -Km and incorrectly identifies it as [S] = 0.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Horizontal asymptote: v=120v = 120

  2. Step 2

    Vertical asymptote: [S]=0[S] = 0

    Correct

    [S]=−15[S] = -15

    A vertical asymptote occurs where the denominator of the rational function equals zero. Setting 15+[S]=015 + [S] = 0 yields [S]=−15[S] = -15, not [S]=0[S] = 0.

  3. Step 3

    lim⁡[S]→∞v([S])=120\lim_{[S] \to \infty} v([S]) = 120

  4. Step 4

    1v=15+[S]120[S]=15120(1[S])+1120  ⟹  1v=18(1[S])+1120\frac{1}{v} = \frac{15 + [S]}{120 [S]} = \frac{15}{120}\left(\frac{1}{[S]}\right) + \frac{1}{120} \implies \frac{1}{v} = \frac{1}{8}\left(\frac{1}{[S]}\right) + \frac{1}{120}

  5. Step 5

    m=18 and b=1120m = \frac{1}{8}\text{ and } b = \frac{1}{120}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the horizontal asymptote and the limit as [S]→∞[S] \to \infty.

You successfully derived the Lineweaver-Burk reciprocal equation by inverting and separating terms.

You identified the exact values for both the slope mm and intercept bb.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misidentified vertical asymptote

You assumed the vertical asymptote is at [S]=0[S] = 0 rather than setting the denominator Km+[S]K_m + [S] equal to 00.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the independent variable's boundary at the physical origin ([S]=0[S] = 0, where v(0)=0v(0) = 0) with the mathematical pole of the rational function where the denominator vanishes (Km+[S]=0K_m + [S] = 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Locating Vertical Asymptotes of Rational Functions
  • For a simplified rational function f(x)=P(x)Q(x)f(x) = \frac{P(x)}{Q(x)}, vertical asymptotes occur at the zeros of the denominator, Q(x)=0Q(x) = 0.

  • Set the entire denominator 15+[S]=015 + [S] = 0 and solve for [S][S] to obtain [S]=−15[S] = -15.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the denominator of v([S])=120[S]15+[S]v([S]) = \frac{120 [S]}{15 + [S]}, which is 15+[S]15 + [S].

  2. Set the denominator equal to zero: 15+[S]=015 + [S] = 0.

  3. Solve for [S][S]: [S]=−15[S] = -15.

Final answer

[S]=−15[S] = -15

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down Q(x)=0Q(x) = 0 explicitly when looking for vertical asymptotes rather than assuming the asymptote lies along the vertical coordinate axis x=0x = 0.

  • Check the value of the function at [S]=0[S] = 0: because v(0)=015=0v(0) = \frac{0}{15} = 0, the graph passes through the origin (0,0)(0,0), confirming that [S]=0[S] = 0 is a valid point on the curve, not an asymptote.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the slope as Km instead of Km/Vmax when constructing the Lineweaver-Burk equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Horizontal asymptote: v=120v = 120 ⟹ Vertical asymptote: [S]=−15[S] = -15 ⟹ lim⁡[S]→∞v([S])=120\lim_{[S] \to \infty} v([S]) = 120

  2. Step 2

    1v=Km(1[S])+1Vmax⁡⟹m=15(1[S])+1120\frac{1}{v} = K_m \left(\frac{1}{[S]}\right) + \frac{1}{V_{\max}} ⟹ m = 15 \left(\frac{1}{[S]}\right) + \frac{1}{120}

    Correct

    1v=KmVmax⁡(1[S])+1Vmax⁡⟹1v=15120(1[S])+1120=18(1[S])+1120\frac{1}{v} = \frac{K_m}{V_{\max}} \left(\frac{1}{[S]}\right) + \frac{1}{V_{\max}} ⟹ \frac{1}{v} = \frac{15}{120} \left(\frac{1}{[S]}\right) + \frac{1}{120} = \frac{1}{8} \left(\frac{1}{[S]}\right) + \frac{1}{120}

    When taking the reciprocal of v=Vmax⁡[S]Km+[S]v = \frac{V_{\max}[S]}{K_m + [S]}, both terms in the numerator must be divided by Vmax⁡[S]V_{\max}[S], giving KmVmax⁡[S]+[S]Vmax⁡[S]=(KmVmax⁡)(1[S])+1Vmax⁡\frac{K_m}{V_{\max}[S]} + \frac{[S]}{V_{\max}[S]} = \left(\frac{K_m}{V_{\max}}\right)\left(\frac{1}{[S]}\right) + \frac{1}{V_{\max}}. The slope is KmVmax⁡\frac{K_m}{V_{\max}}, not KmK_m alone.

  3. Step 3

    m=15m = 15 and b=1120b = \frac{1}{120}

    Correct

    m=18=0.125m = \frac{1}{8} = 0.125 and b=1120b = \frac{1}{120}

    You correctly evaluated the vertical intercept b=1120b = \frac{1}{120}, but your value for the slope mm was affected by omitting Vmax⁡V_{\max} in the denominator of the linear reciprocal equation in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the horizontal asymptote v=120v = 120 and the vertical asymptote [S]=−15[S] = -15 from the rational function.

You accurately evaluated the asymptotic limit lim⁡[S]→∞v([S])=120\lim_{[S] \to \infty} v([S]) = 120.

You correctly identified the vertical intercept b=1Vmax⁡=1120b = \frac{1}{V_{\max}} = \frac{1}{120} in the reciprocal representation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect slope in Lineweaver-Burk reciprocal linearization

You wrote the slope as KmK_m rather than KmVmax⁡\frac{K_m}{V_{\max}} when setting up the Lineweaver-Burk equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the Michaelis-Menten rate law v=Vmax⁡[S]Km+[S]v = \frac{V_{\max}[S]}{K_m + [S]} yields 1v=Km+[S]Vmax⁡[S]\frac{1}{v} = \frac{K_m + [S]}{V_{\max}[S]}. When splitting the numerator over the common denominator, the first term is KmVmax⁡[S]=(KmVmax⁡)(1[S])\frac{K_m}{V_{\max}[S]} = \left(\frac{K_m}{V_{\max}}\right)\left(\frac{1}{[S]}\right). Omitting Vmax⁡V_{\max} from this term leads to equating the slope directly to KmK_m rather than KmVmax⁡\frac{K_m}{V_{\max}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reciprocal Fraction Decomposition
  • Taking the reciprocal of AB+C\frac{A}{B + C} gives B+CA=BA+CA\frac{B + C}{A} = \frac{B}{A} + \frac{C}{A}. Every term in the sum retains the full original numerator AA in its denominator.

  • Always write out 1v=Km+[S]Vmax⁡[S]=KmVmax⁡[S]+[S]Vmax⁡[S]\frac{1}{v} = \frac{K_m + [S]}{V_{\max}[S]} = \frac{K_m}{V_{\max}[S]} + \frac{[S]}{V_{\max}[S]} completely before isolating the slope and intercept.

Lineweaver-Burk Parameter Mapping
  • In the linear reciprocal form y=mx+by = mx + b where y=1vy = \frac{1}{v} and x=1[S]x = \frac{1}{[S]}, the slope is m=KmVmax⁡m = \frac{K_m}{V_{\max}} and the vertical intercept is b=1Vmax⁡b = \frac{1}{V_{\max}}.

  • Check units for dimensional consistency: the slope must have units of y-unitsx-units=s⋅L/nmol1/μM=μM⋅s⋅L/nmol\frac{y\text{-units}}{x\text{-units}} = \frac{\text{s}\cdot\text{L}/\text{nmol}}{1/\mu\text{M}} = \mu\text{M}\cdot\text{s}\cdot\text{L}/\text{nmol}, which requires dividing KmK_m by Vmax⁡V_{\max}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the reciprocal of both sides of the Michaelis-Menten equation: 1v=Km+[S]Vmax⁡[S]\frac{1}{v} = \frac{K_m + [S]}{V_{\max}[S]}.

  2. Split the fraction over the common denominator: 1v=KmVmax⁡[S]+[S]Vmax⁡[S]=(KmVmax⁡)(1[S])+1Vmax⁡\frac{1}{v} = \frac{K_m}{V_{\max}[S]} + \frac{[S]}{V_{\max}[S]} = \left(\frac{K_m}{V_{\max}}\right)\left(\frac{1}{[S]}\right) + \frac{1}{V_{\max}}.

  3. Substitute Km=15K_m = 15 and Vmax⁡=120V_{\max} = 120 into the slope: m=15120=18=0.125m = \frac{15}{120} = \frac{1}{8} = 0.125.

  4. Substitute Vmax⁡=120V_{\max} = 120 into the vertical intercept: b=1120≈0.00833b = \frac{1}{120} \approx 0.00833.

Final answer

Horizontal asymptote: v=120v = 120; Vertical asymptote: [S]=−15[S] = -15; lim⁡[S]→∞v([S])=120 nmol/(L⋅s)\lim_{[S] \to \infty} v([S]) = 120\text{ nmol}/(\text{L}\cdot\text{s}); Reciprocal linear equation: 1v=18(1[S])+1120≈0.125(1[S])+0.00833\frac{1}{v} = \frac{1}{8}\left(\frac{1}{[S]}\right) + \frac{1}{120} \approx 0.125\left(\frac{1}{[S]}\right) + 0.00833, with slope m=18=0.125 μM⋅s⋅L/nmolm = \frac{1}{8} = 0.125\text{ }\mu\text{M}\cdot\text{s}\cdot\text{L}/\text{nmol} and vertical intercept b=1120 s⋅L/nmolb = \frac{1}{120}\text{ s}\cdot\text{L}/\text{nmol}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving the Lineweaver-Burk transformation directly from v=Vmax⁡[S]Km+[S]v = \frac{V_{\max}[S]}{K_m + [S]} to reinforce that Vmax⁡V_{\max} belongs in both the slope and intercept denominators.

  • Perform a quick dimensional analysis check on your slope and intercept values to verify that their units match 1/v1/[S]\frac{1/v}{1/[S]}.

Lock it in

Similar question

01

An enzyme follows Michaelis-Menten kinetics with Vmax⁡=80 nmol/(L⋅s)V_{\max} = 80\text{ nmol}/(\text{L}\cdot\text{s}) and Km=20 μMK_m = 20\text{ }\mu\text{M}. Write the equation of the horizontal asymptote of v([S])v([S]) and find the exact slope mm and vertical intercept bb of its Lineweaver-Burk plot.

Answer

Horizontal asymptote: v=80 nmol/(L⋅s)v = 80\text{ nmol}/(\text{L}\cdot\text{s}). In reciprocal form, 1v=KmVmax⁡(1[S])+1Vmax⁡=2080(1[S])+180=14(1[S])+180\frac{1}{v} = \frac{K_m}{V_{\max}}\left(\frac{1}{[S]}\right) + \frac{1}{V_{\max}} = \frac{20}{80}\left(\frac{1}{[S]}\right) + \frac{1}{80} = \frac{1}{4}\left(\frac{1}{[S]}\right) + \frac{1}{80}. Thus, slope m=14=0.25 μM⋅s⋅L/nmolm = \frac{1}{4} = 0.25\text{ }\mu\text{M}\cdot\text{s}\cdot\text{L}/\text{nmol} and intercept b=180=0.0125 s⋅L/nmolb = \frac{1}{80} = 0.0125\text{ s}\cdot\text{L}/\text{nmol}.

02

A researcher linearizes rate data into the Lineweaver-Burk form 1v=m(1[S])+b\frac{1}{v} = m\left(\frac{1}{[S]}\right) + b and obtains the line 1v=0.4(1[S])+0.02\frac{1}{v} = 0.4\left(\frac{1}{[S]}\right) + 0.02. Determine the values of Vmax⁡V_{\max} and KmK_m, and state the equation of the vertical asymptote of the original rational velocity function v([S])v([S]).

Answer

From b=1Vmax⁡=0.02b = \frac{1}{V_{\max}} = 0.02, we find Vmax⁡=10.02=50 nmol/(L⋅s)V_{\max} = \frac{1}{0.02} = 50\text{ nmol}/(\text{L}\cdot\text{s}). From m=KmVmax⁡=0.4m = \frac{K_m}{V_{\max}} = 0.4, we find Km=0.4×50=20 μMK_m = 0.4 \times 50 = 20\text{ }\mu\text{M}. The original rate function is v([S])=50[S]20+[S]v([S]) = \frac{50[S]}{20 + [S]}, which has denominator zero when [S]+20=0[S] + 20 = 0, giving the vertical asymptote [S]=−20[S] = -20.

03

Consider an inhibited enzyme reaction modeled by v([S])=Vmax⁡[S]αKm+[S]v([S]) = \frac{V_{\max}[S]}{\alpha K_m + [S]}, where Vmax⁡=100V_{\max} = 100, Km=10K_m = 10, and α=2.5\alpha = 2.5. Determine the horizontal asymptote of v([S])v([S]), construct the Lineweaver-Burk equation, and compute the ratio of the slope to the vertical intercept mb\frac{m}{b}.

Answer

The horizontal asymptote is v=lim⁡[S]→∞v([S])=100v = \lim_{[S] \to \infty} v([S]) = 100. The apparent Michaelis constant is Km′=αKm=2.5×10=25K_m' = \alpha K_m = 2.5 \times 10 = 25. Taking reciprocals yields 1v=25100(1[S])+1100=0.25(1[S])+0.01\frac{1}{v} = \frac{25}{100}\left(\frac{1}{[S]}\right) + \frac{1}{100} = 0.25\left(\frac{1}{[S]}\right) + 0.01. The slope is m=0.25m = 0.25 and the vertical intercept is b=0.01b = 0.01. The ratio is mb=Km′/Vmax⁡1/Vmax⁡=Km′=25 μM\frac{m}{b} = \frac{K_m'/V_{\max}}{1/V_{\max}} = K_m' = 25\text{ }\mu\text{M}.

Loading workspace…