Resources

An electric utility models peak power allocation using two primary generators. Let x1x_1 and x2x_2 represent the power outputs (in megawatts) of Generator 1 and Generator 2, respectively. The system is governed by {x1+x2=500x1+(1+ε)x2=500+40ε\begin{cases} x_1 + x_2 = 500 \\ x_1 + (1 + \varepsilon)x_2 = 500 + 40\varepsilon \end{cases}, where ε>0\varepsilon > 0 represents a small operational impedance parameter. Write this linear system in matrix form, find the explicit solution vector [x1x2]\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} as a function of ε\varepsilon, and evaluate the asymptotic limiting power distribution lim⁡ε→0+[x1x2]\lim_{\varepsilon \to 0^+} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix}.

Answer and steps

Final answer

In matrix form, [1111+ε][x1x2]=[500500+40ε]\begin{bmatrix} 1 & 1 \\ 1 & 1+\varepsilon \end{bmatrix} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 500 \\ 500 + 40\varepsilon \end{bmatrix}. Subtracting the first equation from the second yields εx2=40ε\varepsilon x_2 = 40\varepsilon, which for any ε>0\varepsilon > 0 simplifies to x2=40 MWx_2 = 40\text{ MW}. Substituting into the first equation yields x1=500−40=460 MWx_1 = 500 - 40 = 460\text{ MW}. Thus, the solution vector is [x1x2]=[46040]\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix} for all ε>0\varepsilon > 0, and its asymptotic limit as ε→0+\varepsilon \to 0^+ is [x1x2]=[46040] MW\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix}\text{ MW}.

Steps

01

Express the System in Matrix Form

A system of two linear equations with variables x1x_1 and x2x_2 can be written in standard matrix-vector form:

Ax=bA\mathbf{x} = \mathbf{b}

The given system is:

{x1+x2=500,x1+(1+ε)x2=500+40ε\lbrace x_1 + x_2 = 500, \quad x_1 + (1 + \varepsilon)x_2 = 500 + 40\varepsilon

Extract the coefficient matrix AA, the variable vector x\mathbf{x}, and the constant vector b\mathbf{b}:

[1111+ε][x1x2]=[500500+40ε]\begin{bmatrix} 1 & 1 \\ 1 & 1 + \varepsilon \end{bmatrix} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 500 \\ 500 + 40\varepsilon \end{bmatrix}


02

Solve for the Variable Vector [x1x2]\begin{bmatrix} x_1 \\ x_2 \end{bmatrix}

To solve for x1x_1 and x2x_2, eliminate x1x_1 by subtracting the first equation from the second equation:

(x1+(1+ε)x2)−(x1+x2)=(500+40ε)−500(x_1 + (1 + \varepsilon)x_2) - (x_1 + x_2) = (500 + 40\varepsilon) - 500

Simplify both sides:

εx2=40ε\varepsilon x_2 = 40\varepsilon

Since ε>0\varepsilon > 0, we can safely divide both sides by ε\varepsilon:

x2=40 MWx_2 = 40\text{ MW}

Substitute x2=40x_2 = 40 into the first equation:

x1+40=500  ⟹  x1=500−40=460 MWx_1 + 40 = 500 \implies x_1 = 500 - 40 = 460\text{ MW}

Therefore, for all ε>0\varepsilon > 0, the explicit solution vector is:

[x1x2]=[46040] MW\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix}\text{ MW}


03

Evaluate the Asymptotic Limit as ε→0+\varepsilon \to 0^+

Since the solution vector is independent of the value of ε\varepsilon for any ε>0\varepsilon > 0, taking the limit as ε→0+\varepsilon \to 0^+ preserves the constant values:

lim⁡ε→0+[x1x2]=lim⁡ε→0+[46040]=[46040] MW\lim_{\varepsilon \to 0^+} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \lim_{\varepsilon \to 0^+} \begin{bmatrix} 460 \\ 40 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix}\text{ MW}

Common Pitfall: Setting ε=0\varepsilon = 0 directly into the original matrix system leads to two identical equations (x1+x2=500x_1 + x_2 = 500), which gives infinitely many solutions. However, for any physically realistic non-zero impedance parameter ε>0\varepsilon > 0, the solution is unique and permanently fixes the operational output at x1=460 MWx_1 = 460\text{ MW} and x2=40 MWx_2 = 40\text{ MW}.

Educational illustration for this question

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts the first equation from the second but forgets to subtract 500 from the right-hand side, obtaining an erroneous dependency on ε.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    [1111+ε][x1x2]=[500500+40ε]\begin{bmatrix} 1 & 1 \\ 1 & 1 + \varepsilon \end{bmatrix} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 500 \\ 500 + 40\varepsilon \end{bmatrix}

  2. Step 2

    (x1+(1+ε)x2)−(x1+x2)=500+40ε  ⟹  εx2=500+40ε(x_1 + (1+\varepsilon)x_2) - (x_1 + x_2) = 500 + 40\varepsilon \implies \varepsilon x_2 = 500 + 40\varepsilon

    Correct

    (x1+(1+ε)x2)−(x1+x2)=(500+40ε)−500  ⟹  εx2=40ε(x_1 + (1+\varepsilon)x_2) - (x_1 + x_2) = (500 + 40\varepsilon) - 500 \implies \varepsilon x_2 = 40\varepsilon

    When subtracting the first equation from the second equation, you must apply subtraction to both sides. The right-hand side should be (500+40ε)−500=40ε(500 + 40\varepsilon) - 500 = 40\varepsilon, not 500+40ε500 + 40\varepsilon.

  3. Step 3

    x2=500ε+40  ⟹  x1=500−x2=460−500ε  ⟹  [x1x2]=[460−500ε500ε+40]x_2 = \frac{500}{\varepsilon} + 40 \implies x_1 = 500 - x_2 = 460 - \frac{500}{\varepsilon} \implies \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 460 - \frac{500}{\varepsilon} \\ \frac{500}{\varepsilon} + 40 \end{bmatrix}

    Correct

    x2=40εε=40  ⟹  x1=500−40=460  ⟹  [x1x2]=[46040]x_2 = \frac{40\varepsilon}{\varepsilon} = 40 \implies x_1 = 500 - 40 = 460 \implies \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix}

    Your algebraic rearrangement and back-substitution were carried out logically, but they inherited the missing subtraction from Step 2.

  4. Step 4

    lim⁡ε→0+[460−500ε500ε+40] does not exist (diverges to [−∞;∞])\lim_{\varepsilon \to 0^+} \begin{bmatrix} 460 - \frac{500}{\varepsilon} \\ \frac{500}{\varepsilon} + 40 \end{bmatrix} \text{ does not exist (diverges to } [-\infty; \infty]\text{)}

    Correct

    lim⁡ε→0+[46040]=[46040]\lim_{\varepsilon \to 0^+} \begin{bmatrix} 460 \\ 40 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix}

    Because the corrected solution vector is constant and independent of ε\varepsilon, the limit remains finite and constant rather than diverging.

WHAT YOU DID WELL
Compliments from Your Teacher

You translated the simultaneous linear equations into the correct standard matrix-vector representation.

You correctly chose variable elimination as an effective strategy to isolate x2x_2.

You correctly carried through back-substitution and limit evaluation based on your intermediate expressions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
One-sided equation subtraction

You subtracted the left-hand side of equation (1) from equation (2), but carried down the right-hand side of equation (2) without subtracting 500.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Losing track of simultaneous operations across an equality sign during elimination, leading to an unbalanced subtraction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dual-Side Elimination Check
  • If (L2−L1)(L_2 - L_1) is taken on the left side, the right side must simultaneously become (R2−R1)(R_2 - R_1).

  • Always write parentheses around both entire equations before subtracting: (L2=R2)−(L1=R1)  ⟹  (L2−L1)=(R2−R1)(L_2 = R_2) - (L_1 = R_1) \implies (L_2 - L_1) = (R_2 - R_1).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract equation 1 from equation 2 completely: (x1+(1+ε)x2)−(x1+x2)=(500+40ε)−500(x_1 + (1+\varepsilon)x_2) - (x_1 + x_2) = (500 + 40\varepsilon) - 500.

  2. Simplify both sides: εx2=40ε\varepsilon x_2 = 40\varepsilon.

  3. Since ε>0\varepsilon > 0, divide both sides by ε\varepsilon to obtain x2=40x_2 = 40.

  4. Substitute x2=40x_2 = 40 into x1+x2=500x_1 + x_2 = 500 to get x1=500−40=460x_1 = 500 - 40 = 460.

Final answer

[x1x2]=[46040]\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix} and lim⁡ε→0+[x1x2]=[46040] MW\lim_{\varepsilon \to 0^+} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix}\text{ MW}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice rewriting equation subtraction explicitly with stacked rows so right-hand sides are never omitted.

  • When dealing with small perturbation parameters like ε\varepsilon, check whether a diverging limit makes physical sense for a power grid before finalizing your conclusion.

OverviewACEpath Teacher's Diagnosis

02 The student sets ε = 0 before solving, resulting in an underdetermined single equation x₁ + x₂ = 500 with no unique solution.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [1111+ε][x1x2]=[500500+40ε]\begin{bmatrix} 1 & 1 \\ 1 & 1+\varepsilon \end{bmatrix} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 500 \\ 500 + 40\varepsilon \end{bmatrix}

  2. Step 2

    For small ε, set ε=0 directly in the system:  ⟹  {x1+x2=500,x1+x2=500\text{For small } \varepsilon\text{, set } \varepsilon=0 \text{ directly in the system:} \implies \lbrace x_1 + x_2 = 500 ,\quad x_1 + x_2 = 500

    Correct

    Subtracting the first equation from the second equation gives: (x1+(1+ε)x2)−(x1+x2)=(500+40ε)−500  ⟹  εx2=40ε(x_1 + (1+\varepsilon)x_2) - (x_1 + x_2) = (500 + 40\varepsilon) - 500 \implies \varepsilon x_2 = 40\varepsilon Since ε>0\varepsilon > 0, dividing by ε\varepsilon yields x2=40 MWx_2 = 40\text{ MW}, so x1=500−40=460 MWx_1 = 500 - 40 = 460\text{ MW}.

    You substituted ε=0\varepsilon = 0 prematurely into the coefficient matrix and target vector. For any non-zero parameter ε>0\varepsilon > 0, the two rows represent distinct intersecting hyperplanes. Setting ε=0\varepsilon = 0 before solving makes the matrix singular and loses the exact ratio of the perturbation terms.

  3. Step 3

    [x1x2]=[500−tt] for any parameter t\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 500 - t \\ t \end{bmatrix} \text{ for any parameter } t

    Correct

    [x1x2]=[46040]\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix}

    Because you evaluated ε=0\varepsilon = 0 too early, your solution inherited an unconstrained free variable tt rather than determining the specific outputs enforced by ε>0\varepsilon > 0.

  4. Step 4

    lim⁡ε→0+[x1x2]=[500−tt], which is indeterminate without an additional constraint.\lim_{\varepsilon \to 0^+} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 500 - t \\ t \end{bmatrix} \text{, which is indeterminate without an additional constraint.}

    Correct

    lim⁡ε→0+[x1x2]=lim⁡ε→0+[46040]=[46040] MW\lim_{\varepsilon \to 0^+} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \lim_{\varepsilon \to 0^+} \begin{bmatrix} 460 \\ 40 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix}\text{ MW}

    Because the exact solution x(ε)=[46040]\mathbf{x}(\varepsilon) = \begin{bmatrix} 460 \\ 40 \end{bmatrix} is constant for every ε>0\varepsilon > 0, the asymptotic limit as ε→0+\varepsilon \to 0^+ is well-defined and equals [46040] MW\begin{bmatrix} 460 \\ 40 \end{bmatrix}\text{ MW}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly represented the two-variable linear system as a matrix equation Ax=bA\mathbf{x} = \mathbf{b}.

You accurately recognized that setting ε=0\varepsilon = 0 makes the two equations identical and identified the parametric solution of that singular system.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Premature parameter substitution

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You evaluated the asymptotic limit at the model setup stage by substituting ε=0\varepsilon = 0 into the equations rather than solving the parametric linear system for x(ε)\mathbf{x}(\varepsilon) while ε>0\varepsilon > 0 and taking the limit of the solution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Solve Before Limiting
  • In parametric or perturbed systems, solve algebraically for the unknowns in terms of the parameter before evaluating limits.

  • Keep ε>0\varepsilon > 0 as an active algebraic symbol, eliminate variables to find explicit expressions x1(ε)x_1(\varepsilon) and x2(ε)x_2(\varepsilon), and only then evaluate lim⁡ε→0+\lim_{\varepsilon \to 0^+}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract row 1 from row 2: (x1+(1+ε)x2)−(x1+x2)=(500+40ε)−500(x_1 + (1+\varepsilon)x_2) - (x_1 + x_2) = (500 + 40\varepsilon) - 500, which gives εx2=40ε\varepsilon x_2 = 40\varepsilon.

  2. Divide by ε\varepsilon (valid since ε>0\varepsilon > 0) to obtain x2=40 MWx_2 = 40\text{ MW}.

  3. Substitute x2=40x_2 = 40 into the first equation: x1=500−40=460 MWx_1 = 500 - 40 = 460\text{ MW}.

  4. Take the limit as ε→0+\varepsilon \to 0^+ of the constant vector: lim⁡ε→0+[46040]=[46040]\lim_{\varepsilon \to 0^+} \begin{bmatrix} 460 \\ 40 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix}.

Final answer

Matrix form: [1111+ε][x1x2]=[500500+40ε]\begin{bmatrix} 1 & 1 \\ 1 & 1+\varepsilon \end{bmatrix} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 500 \\ 500 + 40\varepsilon \end{bmatrix}; Explicit solution: [x1x2]=[46040]\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix}; Limit: lim⁡ε→0+[x1x2]=[46040] MW\lim_{\varepsilon \to 0^+} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 460 \\ 40 \end{bmatrix}\text{ MW}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always maintain non-zero perturbation parameters until after completing row reduction or variable elimination.

  • Check whether the coefficient matrix determinant det⁡(A)\det(A) depends on ε\varepsilon before substituting values; here det⁡(A)=ε≠0\det(A) = \varepsilon \neq 0 guarantees a unique solution for every ε>0\varepsilon > 0.

Lock it in

Similar question

01

Solve the system for [x1x2]\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} where ε>0\varepsilon > 0: {x1+x2=300,x1+(1+2ε)x2=300+50ε\lbrace x_1 + x_2 = 300, \quad x_1 + (1 + 2\varepsilon)x_2 = 300 + 50\varepsilon

Answer

Subtract the first equation from the second on both sides: 2εx2=(300+50ε)−300=50ε2\varepsilon x_2 = (300 + 50\varepsilon) - 300 = 50\varepsilon. Dividing by 2ε2\varepsilon gives x2=25x_2 = 25. Substitute into the first equation: x1=300−25=275x_1 = 300 - 25 = 275. Thus, [x1x2]=[27525]\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 275 \\ 25 \end{bmatrix}.

02

A dual-source network satisfies the perturbed system: {2x1+3x2=600,2x1+(3+ε)x2=600+15ε\lbrace 2x_1 + 3x_2 = 600, \quad 2x_1 + (3 + \varepsilon)x_2 = 600 + 15\varepsilon Find [x1x2]\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} and compute lim⁡ε→0+[x1x2]\lim_{\varepsilon \to 0^+} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix}.

Answer

Subtract equation 1 from equation 2: εx2=(600+15ε)−600=15ε\varepsilon x_2 = (600 + 15\varepsilon) - 600 = 15\varepsilon. For ε>0\varepsilon > 0, x2=15x_2 = 15. Substitute into 2x1+3(15)=600  ⟹  2x1=555  ⟹  x1=277.52x_1 + 3(15) = 600 \implies 2x_1 = 555 \implies x_1 = 277.5. The solution is constant for all ε>0\varepsilon > 0, so lim⁡ε→0+[x1x2]=[277.515]\lim_{\varepsilon \to 0^+} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} 277.5 \\ 15 \end{bmatrix}.

03

Consider the parameter-dependent system: [1212+ε][x1x2]=[CC+kε]\begin{bmatrix} 1 & 2 \\ 1 & 2 + \varepsilon \end{bmatrix} \begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} C \\ C + k\varepsilon \end{bmatrix} Determine the explicit solution vector x\mathbf{x} in terms of constants CC and kk for ε>0\varepsilon > 0, and state whether it depends on ε\varepsilon.

Answer

Subtracting row 1 from row 2 gives εx2=(C+kε)−C=kε\varepsilon x_2 = (C + k\varepsilon) - C = k\varepsilon. Since ε>0\varepsilon > 0, x2=kx_2 = k. From row 1, x1+2k=C  ⟹  x1=C−2kx_1 + 2k = C \implies x_1 = C - 2k. Therefore, [x1x2]=[C−2kk]\begin{bmatrix} x_1 \\ x_2 \end{bmatrix} = \begin{bmatrix} C - 2k \\ k \end{bmatrix}, which is completely independent of ε\varepsilon.

Loading workspace…