Resources

A sample of nitrogen gas (N2\text{N}_2) is collected over water at 22.0∘C22.0^\circ\text{C}. The liquid level inside the collection eudiometer is adjusted so that it is exactly even with the water level outside the tube, ensuring zero hydrostatic difference. The ambient barometric pressure is 752.4 mmHg752.4\text{ mmHg}, and the vapor pressure of water at 22.0∘C22.0^\circ\text{C} is 19.8 mmHg19.8\text{ mmHg}. A student incorrectly assumes that total pressure equals dry gas pressure minus vapor pressure (Pdry=Patm−PH2OP_{\text{dry}} = P_{\text{atm}} - P_{\text{H}_2\text{O}} is correct, but the student mistakenly adds them as Pdry=Patm+PH2OP_{\text{dry}} = P_{\text{atm}} + P_{\text{H}_2\text{O}} due to an inverted sign convention). Calculate the true partial pressure of dry N2\text{N}_2, and compute the percentage error in the student's calculated moles of N2\text{N}_2 caused by this sign error.

Answer and steps

Final answer

True PN2=732.6 mmHg\text{True } P_{\text{N}_2} = 732.6\text{ mmHg}; Percentage error=+5.41%\text{Percentage error} = +5.41\%

Steps

01

Determine the total pressure of the gas mixture

When a gas is collected over water and the water levels inside and outside the eudiometer are equal, the total pressure of the wet gas mixture inside the tube equals the ambient atmospheric pressure:

Ptotal=Patm=752.4 mmHgP_{\text{total}} = P_{\text{atm}} = 752.4\text{ mmHg}

02

Calculate the true partial pressure of dry nitrogen (NX2\ce{N2})

According to Dalton's law of partial pressures, the total pressure of a gas collected over water is the sum of the partial pressure of the dry gas and the vapor pressure of water:

Ptotal=PNX2+PHX2OP_{\text{total}} = P_{\ce{N2}} + P_{\ce{H2O}}

Rearranging to solve for the true dry gas pressure:

PNX2,true=Ptotal−PHX2O=752.4 mmHg−19.8 mmHg=732.6 mmHgP_{\ce{N2, true}} = P_{\text{total}} - P_{\ce{H2O}} = 752.4\text{ mmHg} - 19.8\text{ mmHg} = 732.6\text{ mmHg}

03

Determine the student's incorrectly calculated pressure

The student mistakenly adds the vapor pressure instead of subtracting it:

PNX2,calc=Patm+PHX2O=752.4 mmHg+19.8 mmHg=772.2 mmHgP_{\ce{N2, calc}} = P_{\text{atm}} + P_{\ce{H2O}} = 752.4\text{ mmHg} + 19.8\text{ mmHg} = 772.2\text{ mmHg}

04

Calculate the percentage error in the calculated moles of NX2\ce{N2}

From the ideal gas law, n=PVRTn = \dfrac{PV}{RT}. Since the volume (VV) and temperature (TT) of the gas sample are identical in both calculations, the number of moles is directly proportional to the partial pressure (n∝Pn \propto P).

Therefore, the percentage error in moles depends strictly on the partial pressures:

Percentage error=ncalc−ntruentrue×100%=PNX2,calc−PNX2,truePNX2,true×100%\text{Percentage error} = \frac{n_{\text{calc}} - n_{\text{true}}}{n_{\text{true}}} \times 100\% = \frac{P_{\ce{N2, calc}} - P_{\ce{N2, true}}}{P_{\ce{N2, true}}} \times 100\%

Substitute the numerical values:

Percentage error=772.2 mmHg−732.6 mmHg732.6 mmHg×100%=39.6 mmHg732.6 mmHg×100%≈+5.41%\text{Percentage error} = \frac{772.2\text{ mmHg} - 732.6\text{ mmHg}}{732.6\text{ mmHg}} \times 100\% = \frac{39.6\text{ mmHg}}{732.6\text{ mmHg}} \times 100\% \approx +5.41\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the error by the incorrect experimental value instead of the true theoretical value when computing percentage error.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P(true)=752.4 mmHg−19.8 mmHg=732.6 mmHg  ⟹  P(student)=752.4 mmHg+19.8 mmHg=772.2 mmHgP(\text{true}) = 752.4\text{ mmHg} - 19.8\text{ mmHg} = 732.6\text{ mmHg} \implies P(\text{student}) = 752.4\text{ mmHg} + 19.8\text{ mmHg} = 772.2\text{ mmHg}

  2. Step 2

    Percentage Error=[(772.2−732.6)772.2]×100%  ⟹  Percentage Error=(39.6772.2)×100%≈5.13%\text{Percentage Error} = \left[\frac{(772.2 - 732.6)}{772.2}\right] \times 100\% \implies \text{Percentage Error} = \left(\frac{39.6}{772.2}\right) \times 100\% \approx 5.13\%

    Correct

    Percentage Error=Pcalc−PtruePtrue×100%=(39.6 mmHg732.6 mmHg)×100%≈+5.41%\text{Percentage Error} = \frac{P_{\text{calc}} - P_{\text{true}}}{P_{\text{true}}} \times 100\% = \left(\frac{39.6\text{ mmHg}}{732.6\text{ mmHg}}\right) \times 100\% \approx +5.41\%

    You placed the experimental/calculated value (772.2 mmHg772.2\text{ mmHg}) in the denominator instead of the true reference value (732.6 mmHg732.6\text{ mmHg}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly subtracted the vapor pressure of water from the barometric pressure to obtain the true partial pressure of dry nitrogen.

You accurately modeled the student's sign error to determine the incorrect pressure of 772.2 mmHg772.2\text{ mmHg}.

You correctly recognized that moles are directly proportional to partial pressure at constant volume and temperature.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect denominator in percentage error formula

Dividing the absolute error by the experimental value instead of the accepted theoretical value.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the baseline reference value in percentage error: the reference denominator must always be the true (theoretical or accepted) value, not the trial or experimental value.

REASONING PATH
Your ACEpath teacher’s suggested approach
Base Value for Percentage Error
  • Percentage Error=Experimental−TheoreticalTheoretical×100%\text{Percentage Error} = \frac{\text{Experimental} - \text{Theoretical}}{\text{Theoretical}} \times 100\%

  • Always verify that the denominator is the true or accepted standard against which the error is measured.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the true baseline: Ptrue=732.6 mmHgP_{\text{true}} = 732.6\text{ mmHg} and calculated value: Pcalc=772.2 mmHgP_{\text{calc}} = 772.2\text{ mmHg}.

  2. Form the ratio with the true value in the denominator: 772.2 mmHg−732.6 mmHg732.6 mmHg=39.6 mmHg732.6 mmHg\frac{772.2\text{ mmHg} - 732.6\text{ mmHg}}{732.6\text{ mmHg}} = \frac{39.6\text{ mmHg}}{732.6\text{ mmHg}}.

  3. Multiply by 100%100\%: 39.6732.6×100%≈+5.41%\frac{39.6}{732.6} \times 100\% \approx +5.41\%.

Final answer

True PN2=732.6 mmHg\text{True } P_{\text{N}_2} = 732.6\text{ mmHg}; Percentage error=+5.41%\text{Percentage error} = +5.41\%

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating percentage error, label your values explicitly as Valuetrue\text{Value}_{\text{true}} and Valueexp\text{Value}_{\text{exp}} before writing the fraction.

  • Double-check that the denominator matches Valuetrue\text{Value}_{\text{true}} before computing the final percentage.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the error relative to the total atmospheric pressure rather than the true dry nitrogen pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P(dry)=752.4 mmHg−19.8 mmHg=732.6 mmHgP(\text{dry}) = 752.4\text{ mmHg} - 19.8\text{ mmHg} = 732.6\text{ mmHg}

  2. Step 2

    P(student)=752.4 mmHg+19.8 mmHg=772.2 mmHgP(\text{student}) = 752.4\text{ mmHg} + 19.8\text{ mmHg} = 772.2\text{ mmHg}

  3. Step 3

    Difference=772.2−732.6=39.6 mmHg\text{Difference} = 772.2 - 732.6 = 39.6\text{ mmHg}

  4. Step 4

    Percentage Error=(39.6752.4)×100%≈5.26%\text{Percentage Error} = \left(\frac{39.6}{752.4}\right) \times 100\% \approx 5.26\%

    Correct

    Percentage Error=(39.6 mmHg732.6 mmHg)×100%≈+5.41%\text{Percentage Error} = \left(\frac{39.6\text{ mmHg}}{732.6\text{ mmHg}}\right) \times 100\% \approx +5.41\%

    You divided by the total atmospheric pressure (752.4 mmHg752.4\text{ mmHg}) instead of the true reference value (732.6 mmHg732.6\text{ mmHg}). Percentage error must always be calculated relative to the true value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly subtracted the vapor pressure of water from the barometric pressure to find the true partial pressure of nitrogen.

You accurately calculated the student's erroneous partial pressure using the inverted sign convention.

You accurately found the difference between the erroneous and true values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong reference value in percentage error formula

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the total atmospheric pressure (752.4 mmHg752.4\text{ mmHg}) as the denominator in the percentage error formula instead of the true dry nitrogen value (732.6 mmHg732.6\text{ mmHg}). By definition, Percentage Error=experimental−truetrue×100%\text{Percentage Error} = \frac{\text{experimental} - \text{true}}{\text{true}} \times 100\%. Because the number of moles is directly proportional to the dry gas partial pressure, the true reference quantity is the dry nitrogen pressure.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Reference Value
  • Percentage error is defined relative to the accepted or true value: Error=Calculated−TrueTrue×100%\text{Error} = \frac{\text{Calculated} - \text{True}}{\text{True}} \times 100\%.

  • Always place the true baseline value in the denominator, not the total or initial atmospheric pressure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the true reference value for dry nitrogen: PNX2,true=732.6 mmHgP_{\ce{N2, true}} = 732.6\text{ mmHg}.

  2. Set up the percentage error formula with the true value in the denominator: Percentage Error=772.2 mmHg−732.6 mmHg732.6 mmHg×100%\text{Percentage Error} = \frac{772.2\text{ mmHg} - 732.6\text{ mmHg}}{732.6\text{ mmHg}} \times 100\%.

  3. Evaluate the fraction: 39.6732.6×100%≈+5.41%\frac{39.6}{732.6} \times 100\% \approx +5.41\%.

Final answer

True PNX2=732.6 mmHg\text{True } P_{\ce{N2}} = 732.6\text{ mmHg}; Percentage error=+5.41%\text{Percentage error} = +5.41\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your denominator whenever you compute a relative or percentage error to ensure it represents the true accepted quantity rather than a system total.

  • Review the relationship between Dalton's law of partial pressures and mole fractions in gas collection setups.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the percentage error by comparing the student's pressure to the true pressure as a ratio instead of finding the relative deviation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P(true)=752.4 mmHg−19.8 mmHg=732.6 mmHgP(\text{true}) = 752.4\text{ mmHg} - 19.8\text{ mmHg} = 732.6\text{ mmHg}

  2. Step 2

    P(student)=752.4 mmHg+19.8 mmHg=772.2 mmHgP(\text{student}) = 752.4\text{ mmHg} + 19.8\text{ mmHg} = 772.2\text{ mmHg}

  3. Step 3

    Percentage Error=(772.2732.6)×100%≈105.41%\text{Percentage Error} = \left(\frac{772.2}{732.6}\right) \times 100\% \approx 105.41\%

    Correct

    Percentage error=772.2 mmHg−732.6 mmHg732.6 mmHg×100%=39.6 mmHg732.6 mmHg×100%≈+5.41%\text{Percentage error} = \frac{772.2\text{ mmHg} - 732.6\text{ mmHg}}{732.6\text{ mmHg}} \times 100\% = \frac{39.6\text{ mmHg}}{732.6\text{ mmHg}} \times 100\% \approx +5.41\%

    You calculated the ratio of the calculated value to the true value as a percentage ($ experimentaltheoretical\frac{\text{experimental}}{\text{theoretical}} ×\times 100%) instead of the percentage deviation. The numerator of a percentage error must be the difference $$\text{experimental} - theoretical\text{theoretical}$.$$

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Dalton's law of partial pressures to compute the true dry nitrogen pressure.

You correctly calculated the numerical pressure resulting from the sign mistake.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percentage error formula confusion

You set up the fraction as experimentaltrue\frac{\text{experimental}}{\text{true}} rather than finding the relative difference experimental−truetrue\frac{\text{experimental} - \text{true}}{\text{true}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a ratio/percentage of a baseline value with percentage error, which measures the excess or deficit relative to the accepted reference.

REASONING PATH
Your ACEpath teacher’s suggested approach
Percentage Error Definition
  • Percentage Error=Experimental−TheoreticalTheoretical×100%\text{Percentage Error} = \frac{\text{Experimental} - \text{Theoretical}}{\text{Theoretical}} \times 100\%

  • Always verify that the numerator represents the difference (error) rather than the entire experimental measurement.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the absolute deviation: ΔP=Pcalc−Ptrue=772.2 mmHg−732.6 mmHg=+39.6 mmHg\Delta P = P_{\text{calc}} - P_{\text{true}} = 772.2\text{ mmHg} - 732.6\text{ mmHg} = +39.6\text{ mmHg}.

  2. Divide by the true reference value: 39.6 mmHg732.6 mmHg≈0.054054\frac{39.6\text{ mmHg}}{732.6\text{ mmHg}} \approx 0.054054.

  3. Multiply by 100%100\% to get the relative percentage error: +5.41%+5.41\%.

Final answer

True PNX2=732.6 mmHg; Percentage error=+5.41%\text{True } P_{\ce{N2}} = 732.6\text{ mmHg};\text{ Percentage error} = +5.41\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check percentage error formulas before computing to ensure the numerator contains the difference (value−reference)(\text{value} - \text{reference}).

  • Perform a sanity check on percentage error: an error should typically be near 0%0\%, whereas a percentage of the total is often near 100%100\%.

Lock it in

Similar question

01

Oxygen gas is collected over water at 25.0∘C25.0^\circ\text{C} where PH2O=23.8 mmHgP_{\text{H}_2\text{O}} = 23.8\text{ mmHg}. The barometric pressure is 760.0 mmHg760.0\text{ mmHg}. An experimenter neglects water vapor entirely and uses 760.0 mmHg760.0\text{ mmHg} as the dry gas pressure. Calculate the true dry oxygen pressure and the percentage error in the calculated moles of O2\text{O}_2.

Answer

True PO2=760.0−23.8=736.2 mmHgP_{\text{O}_2} = 760.0 - 23.8 = 736.2\text{ mmHg}. Error =760.0−736.2736.2×100%=23.8736.2×100%≈+3.23%= \frac{760.0 - 736.2}{736.2} \times 100\% = \frac{23.8}{736.2} \times 100\% \approx +3.23\%.

02

A student collects hydrogen gas over water at 20.0∘C20.0^\circ\text{C} (PH2O=17.5 mmHgP_{\text{H}_2\text{O}} = 17.5\text{ mmHg}) at an atmospheric pressure of 745.0 mmHg745.0\text{ mmHg}. Due to an error in reading the vapor pressure table, the student subtracts 21.0 mmHg21.0\text{ mmHg} instead of 17.5 mmHg17.5\text{ mmHg}. Determine the true PH2P_{\text{H}_2} and compute the percentage error in the calculated moles of H2\text{H}_2.

Answer

True PH2=745.0−17.5=727.5 mmHgP_{\text{H}_2} = 745.0 - 17.5 = 727.5\text{ mmHg}. Calculated PH2=745.0−21.0=724.0 mmHgP_{\text{H}_2} = 745.0 - 21.0 = 724.0\text{ mmHg}. Error =724.0−727.5727.5×100%=−3.5727.5×100%≈−0.48%= \frac{724.0 - 727.5}{727.5} \times 100\% = \frac{-3.5}{727.5} \times 100\% \approx -0.48\%.

03

Carbon dioxide gas is collected over water at 23.0∘C23.0^\circ\text{C} (PH2O=21.1 mmHgP_{\text{H}_2\text{O}} = 21.1\text{ mmHg}). The total pressure inside the vessel is 755.0 mmHg755.0\text{ mmHg}. A student accidentally doubles the vapor pressure correction, calculating Pdry=Ptotal−2PH2OP_{\text{dry}} = P_{\text{total}} - 2P_{\text{H}_2\text{O}}. Calculate the true PCO2P_{\text{CO}_2} and the percentage error in the resulting calculated moles of CO2\text{CO}_2.

Answer

True PCO2=755.0−21.1=733.9 mmHgP_{\text{CO}_2} = 755.0 - 21.1 = 733.9\text{ mmHg}. Calculated PCO2=755.0−2(21.1)=712.8 mmHgP_{\text{CO}_2} = 755.0 - 2(21.1) = 712.8\text{ mmHg}. Error =712.8−733.9733.9×100%=−21.1733.9×100%≈−2.87%= \frac{712.8 - 733.9}{733.9} \times 100\% = \frac{-21.1}{733.9} \times 100\% \approx -2.87\%.

Loading workspace…