Resources

Consider the combustion of propane according to the balanced chemical equation: C3H8(g)+5O2(g)→3CO2(g)+4H2O(g)\text{C}_3\text{H}_8(g) + 5\text{O}_2(g) \rightarrow 3\text{CO}_2(g) + 4\text{H}_2\text{O}(g). If 22.05 g22.05\text{ g} of propane is completely burned in the presence of excess oxygen gas, calculate the theoretical yield of carbon dioxide gas produced in grams. (Molar masses: C3H8=44.10 g/mol\text{C}_3\text{H}_8 = 44.10\text{ g/mol}, CO2=44.01 g/mol\text{CO}_2 = 44.01\text{ g/mol}).

Answer and steps

Final answer

66.02 g66.02\text{ g}

Steps

01

Convert the given mass of CX3HX8\ce{C3H8} to moles

To find the theoretical yield of carbon dioxide (COX2\ce{CO2}), follow the standard three-step stoichiometric conversion: mass of reactant →\rightarrow moles of reactant →\rightarrow moles of product →\rightarrow mass of product.

Use the molar mass of propane (CX3HX8=44.10 g/mol\ce{C3H8} = 44.10\text{ g/mol}):

Moles of CX3HX8=Mass of CX3HX8Molar mass of CX3HX8=22.05 g44.10 g/mol=0.5000 mol\text{Moles of }\ce{C3H8} = \frac{\text{Mass of }\ce{C3H8}}{\text{Molar mass of }\ce{C3H8}} = \frac{22.05\text{ g}}{44.10\text{ g/mol}} = 0.5000\text{ mol}

02

Use the mole ratio from the balanced equation

From the balanced chemical equation:

CX3HX8(g)+5 OX2(g)→3 COX2(g)+4 HX2O(g)\ce{C3H8(g) + 5O2(g) -> 3CO2(g) + 4H2O(g)}

The stoichiometric coefficient ratio between CX3HX8\ce{C3H8} and COX2\ce{CO2} is 1:31 : 3. Since oxygen is in excess, CX3HX8\ce{C3H8} acts as the limiting reactant:

Moles of COX2=0.5000 mol CX3HX8×3 mol COX21 mol CX3HX8=1.500 mol COX2\text{Moles of }\ce{CO2} = 0.5000\text{ mol }\ce{C3H8} \times \frac{3\text{ mol }\ce{CO2}}{1\text{ mol }\ce{C3H8}} = 1.500\text{ mol }\ce{CO2}

03

Convert moles of COX2\ce{CO2} to grams

Multiply the moles of carbon dioxide by its molar mass (COX2=44.01 g/mol\ce{CO2} = 44.01\text{ g/mol}):

Theoretical yield of COX2=1.500 mol×44.01 g/mol=66.015 g≈66.02 g\text{Theoretical yield of }\ce{CO2} = 1.500\text{ mol} \times 44.01\text{ g/mol} = 66.015\text{ g} \approx 66.02\text{ g}

Common Pitfall: Do not convert directly from grams of reactant to grams of product using the coefficient ratio (e.g., multiplying the mass of propane by 33). Stoichiometric ratios strictly apply to amounts in moles, not mass.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to apply the stoichiometric mole ratio between C3H8 and CO2 from the balanced chemical equation, assuming a 1:1 mole ratio and obtaining 22.01 g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mol C3H8=22.05 g44.10 g/mol=0.50 mol\text{mol }\text{C}_3\text{H}_8 = \frac{22.05\text{ g}}{44.10\text{ g/mol}} = 0.50\text{ mol}

  2. Step 2

    mol CO2=0.50 mol\text{mol }\text{CO}_2 = 0.50\text{ mol}

    Correct

    mol CO2=0.5000 mol C3H8×3 mol CO21 mol C3H8=1.500 mol\text{mol }\text{CO}_2 = 0.5000\text{ mol }\text{C}_3\text{H}_8 \times \frac{3\text{ mol }\text{CO}_2}{1\text{ mol }\text{C}_3\text{H}_8} = 1.500\text{ mol}

    You set the moles of CO2\text{CO}_2 directly equal to the moles of C3H8\text{C}_3\text{H}_8. According to the balanced equation C3H8+5O2→3CO2+4H2O\text{C}_3\text{H}_8 + 5\text{O}_2 \rightarrow 3\text{CO}_2 + 4\text{H}_2\text{O}, 1 mol1\text{ mol} of propane produces 3 mol3\text{ mol} of carbon dioxide.

  3. Step 3

    mass CO2=0.50 mol×44.01 g/mol=22.01 g\text{mass }\text{CO}_2 = 0.50\text{ mol} \times 44.01\text{ g/mol} = 22.01\text{ g}

    Correct

    mass CO2=1.500 mol×44.01 g/mol=66.02 g\text{mass }\text{CO}_2 = 1.500\text{ mol} \times 44.01\text{ g/mol} = 66.02\text{ g}

    Your method of multiplying moles by the molar mass of CO2\text{CO}_2 was algebraically correct, but the numerical answer was thrown off by the incorrect mole quantity from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of reactant from mass and molar mass.

You used the correct molar mass of CO2\text{CO}_2 to convert moles to grams.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Stoichiometric Mole Ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You skipped the stoichiometric conversion factor between the reactant and product, implicitly assuming that 1 mol1\text{ mol} of reactant always yields 1 mol1\text{ mol} of product regardless of the balanced equation's coefficients.

REASONING PATH
Your ACEpath teacher’s suggested approach
Apply the mole ratio bridge
  • The conversion between moles of substance A and moles of substance B must use the coefficients from the balanced equation: moles B=moles A×coefficient of Bcoefficient of A\text{moles B} = \text{moles A} \times \frac{\text{coefficient of B}}{\text{coefficient of A}}.

  • Before converting moles to mass for any product, look at the balanced equation, write down the mole ratio fraction with units, and multiply your reactant moles by it.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. mol CO2=0.5000 mol C3H8×3 mol CO21 mol C3H8=1.500 mol\text{mol }\text{CO}_2 = 0.5000\text{ mol }\text{C}_3\text{H}_8 \times \frac{3\text{ mol }\text{CO}_2}{1\text{ mol }\text{C}_3\text{H}_8} = 1.500\text{ mol}

  2. mass CO2=1.500 mol×44.01 g/mol=66.015 g≈66.02 g\text{mass }\text{CO}_2 = 1.500\text{ mol} \times 44.01\text{ g/mol} = 66.015\text{ g} \approx 66.02\text{ g}

Final answer

66.02 g66.02\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the units in your conversion factors (e.g., 3 mol CO21 mol C3H8\frac{3\text{ mol }\text{CO}_2}{1\text{ mol }\text{C}_3\text{H}_8}) so you can cancel out the reactant unit explicitly.

  • Practice setting up stoichiometry problems as one continuous dimensional-analysis train: g A→mol A→mol B→g B\text{g A} \rightarrow \text{mol A} \rightarrow \text{mol B} \rightarrow \text{g B}.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the stoichiometric mole ratio by dividing by 3 instead of multiplying by 3, yielding 7.34 g of CO2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mol CX3HX8=22.0544.10=0.50 mol\text{mol }\ce{C3H8} = \frac{22.05}{44.10} = 0.50\text{ mol}

  2. Step 2

    mol COX2=0.50 mol3=0.1667 mol\text{mol }\ce{CO2} = \frac{0.50\text{ mol}}{3} = 0.1667\text{ mol}

    Correct

    mol COX2=0.5000 mol CX3HX8×3 mol COX21 mol CX3HX8=1.500 mol\text{mol }\ce{CO2} = 0.5000\text{ mol }\ce{C3H8} \times \frac{3\text{ mol }\ce{CO2}}{1\text{ mol }\ce{C3H8}} = 1.500\text{ mol}

    The balanced equation shows that 1 mol1\text{ mol} of CX3HX8\ce{C3H8} produces 3 mol3\text{ mol} of COX2\ce{CO2}. You divided by 33 instead of multiplying by the ratio 3 mol COX21 mol CX3HX8\frac{3\text{ mol }\ce{CO2}}{1\text{ mol }\ce{C3H8}}.

  3. Step 3

    mass COX2=0.1667 mol×44.01 g/mol=7.34 g\text{mass }\ce{CO2} = 0.1667\text{ mol} \times 44.01\text{ g/mol} = 7.34\text{ g}

    Correct

    mass COX2=1.500 mol×44.01 g/mol=66.02 g\text{mass }\ce{CO2} = 1.500\text{ mol} \times 44.01\text{ g/mol} = 66.02\text{ g}

    Your method of multiplying moles by molar mass was correct, but the calculation used the incorrect mole quantity from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the moles of CX3HX8\ce{C3H8} from its mass and molar mass.

You correctly applied the formula mass=moles×molar mass\text{mass} = \text{moles} \times \text{molar mass} to find the final mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Stoichiometric Ratio

You divided by the stoichiometric coefficient of 33 instead of multiplying by 33.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You did not set up dimensional analysis units to cancel out moles of CX3HX8\ce{C3H8} and introduce moles of COX2\ce{CO2}, leading to an inverted conversion factor.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Cancellation Check
  • Always write mole ratios as fractions with units: target coefficient mol targetgiven coefficient mol given\frac{\text{target coefficient }\text{mol target}}{\text{given coefficient }\text{mol given}} so the given units cancel.

  • Before calculating, check that mol CX3HX8\text{mol }\ce{C3H8} is in the denominator and cancels out.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. mol COX2=0.50 mol CX3HX8×3 mol COX21 mol CX3HX8=1.50 mol COX2\text{mol }\ce{CO2} = 0.50\text{ mol }\ce{C3H8} \times \frac{3\text{ mol }\ce{CO2}}{1\text{ mol }\ce{C3H8}} = 1.50\text{ mol }\ce{CO2}

  2. mass COX2=1.50 mol×44.01 g/mol=66.02 g\text{mass }\ce{CO2} = 1.50\text{ mol} \times 44.01\text{ g/mol} = 66.02\text{ g}

Final answer

66.02 g66.02\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out complete units including the chemical formula for every mole ratio factor.

  • Verify whether the product coefficient is larger than the reactant coefficient; if it is, the moles of product must be greater than the moles of reactant.

OverviewACEpath Teacher's Diagnosis

03 The student directly multiplies the initial mass of propane by the stoichiometric coefficient 3 without converting to moles first, resulting in 66.15 g of CO2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mass COX2=3×22.05 g=66.15 g\text{mass }\ce{CO2} = 3 \times 22.05\text{ g} = 66.15\text{ g}

    Correct

    Mass of COX2=22.05 g44.10 g/mol×3 mol COX21 mol CX3HX8×44.01 g/mol=66.02 g\text{Mass of }\ce{CO2} = \frac{22.05\text{ g}}{44.10\text{ g/mol}} \times \frac{3\text{ mol }\ce{CO2}}{1\text{ mol }\ce{C3H8}} \times 44.01\text{ g/mol} = 66.02\text{ g}

    You multiplied the mass of propane directly by the stoichiometric coefficient 33. Chemical equation coefficients represent mole ratios, not mass ratios, because molecules of different substances have different molar masses.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the balanced chemical equation produces 33 molecules of COX2\ce{CO2} for every 11 molecule of CX3HX8\ce{C3H8} burned.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Directly applying mole ratios to mass values

You multiplied the mass of reactant (22.05 g22.05\text{ g}) directly by the stoichiometric coefficient 33 to calculate the product mass (66.15 g66.15\text{ g}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Coefficients in a balanced chemical equation represent ratios of moles (or individual particles), never ratios of mass. Because propane and carbon dioxide have different molar masses, you must first convert grams of reactant to moles, apply the mole ratio, and then convert back to grams of product.

REASONING PATH
Your ACEpath teacher’s suggested approach
The Stoichiometric Bridge
  • Coefficients in a chemical equation define mole ratios: Moles of A→Moles of B\text{Moles of } A \rightarrow \text{Moles of } B.

  • Always convert a given mass to moles (extmol=massmolar mass ext{mol} = \frac{\text{mass}}{\text{molar mass}}) before using chemical equation coefficients.

Dimensional Analysis Verification
  • Every conversion factor must carry explicit units that cancel out properly.

  • Set up unit cancellation: g A×1 mol AMolar mass A×b mol Ba mol A×Molar mass B1 mol B\text{g } A \times \frac{1\text{ mol } A}{\text{Molar mass } A} \times \frac{b\text{ mol } B}{a\text{ mol } A} \times \frac{\text{Molar mass } B}{1\text{ mol } B}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Moles of CX3HX8=22.05 g44.10 g/mol=0.5000 mol\text{Moles of }\ce{C3H8} = \frac{22.05\text{ g}}{44.10\text{ g/mol}} = 0.5000\text{ mol}

  2. Moles of COX2=0.5000 mol CX3HX8×3 mol COX21 mol CX3HX8=1.500 mol COX2\text{Moles of }\ce{CO2} = 0.5000\text{ mol }\ce{C3H8} \times \frac{3\text{ mol }\ce{CO2}}{1\text{ mol }\ce{C3H8}} = 1.500\text{ mol }\ce{CO2}

  3. Mass of COX2=1.500 mol×44.01 g/mol=66.02 g\text{Mass of }\ce{CO2} = 1.500\text{ mol} \times 44.01\text{ g/mol} = 66.02\text{ g}

Final answer

66.02 g66.02\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out complete units (such as g CX3HX8\text{g }\ce{C3H8} and mol COX2\text{mol }\ce{CO2}) in your calculations rather than bare numbers.

  • Memorize the standard stoichiometry roadmap: Mass A→Moles A→Moles B→Mass B\text{Mass } A \rightarrow \text{Moles } A \rightarrow \text{Moles } B \rightarrow \text{Mass } B.

Lock it in

Similar question

01

Consider the synthesis of water: 2H2(g)+O2(g)→2H2O(l)2\text{H}_2(g) + \text{O}_2(g) \rightarrow 2\text{H}_2\text{O}(l). If 4.00 g4.00\text{ g} of O2\text{O}_2 reacts with excess hydrogen gas, calculate the mass of H2O\text{H}_2\text{O} produced in grams. (Molar masses: O2=32.00 g/mol\text{O}_2 = 32.00\text{ g/mol}, H2O=18.02 g/mol\text{H}_2\text{O} = 18.02\text{ g/mol})

Answer

4.51 g4.51\text{ g}. Moles of O2=4.00 g32.00 g/mol=0.125 mol\text{O}_2 = \frac{4.00\text{ g}}{32.00\text{ g/mol}} = 0.125\text{ mol}. Mole ratio is 2 mol H2O1 mol O2\frac{2\text{ mol }\text{H}_2\text{O}}{1\text{ mol }\text{O}_2}, giving 0.125×2=0.250 mol H2O0.125 \times 2 = 0.250\text{ mol }\text{H}_2\text{O}. Mass of H2O=0.250 mol×18.02 g/mol=4.51 g\text{H}_2\text{O} = 0.250\text{ mol} \times 18.02\text{ g/mol} = 4.51\text{ g}.

02

In the combustion of ethane: 2C2H6(g)+7O2(g)→4CO2(g)+6H2O(g)2\text{C}_2\text{H}_6(g) + 7\text{O}_2(g) \rightarrow 4\text{CO}_2(g) + 6\text{H}_2\text{O}(g), 15.04 g15.04\text{ g} of C2H6\text{C}_2\text{H}_6 is burned with excess oxygen. Calculate the mass of CO2\text{CO}_2 formed in grams. (Molar masses: C2H6=30.08 g/mol\text{C}_2\text{H}_6 = 30.08\text{ g/mol}, CO2=44.01 g/mol\text{CO}_2 = 44.01\text{ g/mol})

Answer

44.01 g44.01\text{ g}. Moles of C2H6=15.04 g30.08 g/mol=0.5000 mol\text{C}_2\text{H}_6 = \frac{15.04\text{ g}}{30.08\text{ g/mol}} = 0.5000\text{ mol}. Mole ratio is 4 mol CO22 mol C2H6=2\frac{4\text{ mol }\text{CO}_2}{2\text{ mol }\text{C}_2\text{H}_6} = 2, giving 0.5000×2=1.000 mol CO20.5000 \times 2 = 1.000\text{ mol }\text{CO}_2. Mass of CO2=1.000 mol×44.01 g/mol=44.01 g\text{CO}_2 = 1.000\text{ mol} \times 44.01\text{ g/mol} = 44.01\text{ g}.

03

Iron reacts with oxygen according to 4Fe(s)+3O2(g)→2Fe2O3(s)4\text{Fe}(s) + 3\text{O}_2(g) \rightarrow 2\text{Fe}_2\text{O}_3(s). If 11.17 g11.17\text{ g} of Fe\text{Fe} reacts completely with excess oxygen, calculate the theoretical yield of Fe2O3\text{Fe}_2\text{O}_3 in grams. (Molar masses: Fe=55.85 g/mol\text{Fe} = 55.85\text{ g/mol}, Fe2O3=159.70 g/mol\text{Fe}_2\text{O}_3 = 159.70\text{ g/mol})

Answer

15.97 g15.97\text{ g}. Moles of Fe=11.17 g55.85 g/mol=0.2000 mol\text{Fe} = \frac{11.17\text{ g}}{55.85\text{ g/mol}} = 0.2000\text{ mol}. Mole ratio is 2 mol Fe2O34 mol Fe=0.5\frac{2\text{ mol }\text{Fe}_2\text{O}_3}{4\text{ mol }\text{Fe}} = 0.5, yielding 0.2000×0.5=0.1000 mol Fe2O30.2000 \times 0.5 = 0.1000\text{ mol }\text{Fe}_2\text{O}_3. Mass of Fe2O3=0.1000 mol×159.70 g/mol=15.97 g\text{Fe}_2\text{O}_3 = 0.1000\text{ mol} \times 159.70\text{ g/mol} = 15.97\text{ g}.

Loading workspace…