Resources
Consider the formation of calcium fluoride precipitate when calcium nitrate and sodium fluoride are mixed: , with at . If of is mixed with of an aqueous solution: (a) Calculate the minimum concentration of the incoming solution required to just initiate precipitation of (the threshold where the reaction quotient ). (b) State whether a precipitate will form if the incoming concentration is .
Answer and steps
Final answer
(a) ; (b) No precipitate forms because
Steps
Write the solubility product expression
Part (a): Minimum Concentration of Incoming to Initiate Precipitation
The dissolution equilibrium of calcium fluoride is:
The ion product (reaction quotient, ) and solubility product constant () are expressed as:
Determine the concentration of in the mixed solution
When two solutions are combined, their volumes are additive. The total volume after mixing is:
Because dissociates completely into one ion per formula unit, the concentration of after mixing is:
Calculate the threshold concentration of in the mixture
Precipitation begins when the reaction quotient just equals the solubility product ():
Substitute the known values and solve for :
Common Pitfall: A frequent mistake is taking directly as the answer. The question asks for the concentration of the incoming (stock) solution before mixing, so the dilution factor must be accounted for.
Account for dilution to find the incoming stock concentration
Since provides one per formula unit, let be the initial concentration of the solution:
Part (b): Assessing Precipitation with
Calculate in the mixture
Calculate the ion product
Compare with
Since , the solution is unsaturated with respect to calcium fluoride. Therefore, no precipitate forms.
Typical errors
01 The student forgets to square the fluoride ion concentration in the K_sp expression, leading to an incorrect threshold fluoride concentration and incoming NaF concentration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the dissolution reaction is , the concentration of must be raised to the power of its stoichiometric coefficient, which is .
- Step 3Correct
Your dilution logic using was applied properly, but your numerical result was affected by the incorrect value from Step 2.
- Step 4
"Since , a precipitate will form."
Correct, so no precipitate will form.
Because the true threshold concentration is , the incoming concentration of is below the threshold, meaning no precipitate forms.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total volume and diluted concentration of .
You recognized that incoming stock concentration must be related to mixture concentration through dilution.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote without squaring the fluoride ion concentration.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the law of mass action coefficient rule, where each aqueous species in an equilibrium constant expression must be raised to the power of its stoichiometric coefficient in the balanced dissolution equation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Write the balanced dissolution equation
For a salt , the solubility product expression is .
Always write out the dissociation equation first and explicitly check that every coefficient becomes an exponent.
- Check the exponent before solving
If an ion has a coefficient of , its concentration is squared in and .
Ensure you take the square root when solving for an unknown ion concentration with exponent .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the solubility equilibrium: .
Set up the expression: .
Substitute and solve for : .
Calculate the minimum incoming stock concentration of : .
For part (b), compare incoming with threshold . Since (or ), no precipitate will form.
(a) ; (b) No precipitate forms because .
02 The student calculates the required threshold concentration of fluoride in the mixed solution but forgets to account for the dilution of the incoming 300.0 mL NaF solution.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You treated the threshold concentration in the final mixture as the concentration of the original incoming solution. Because the solution was diluted from to , its stock concentration must be higher by a factor of .
- Step 4Correct
, so no precipitate forms.
Your qualitative conclusion that no precipitate forms is correct, but you directly compared an incoming stock concentration () with your in-mixture threshold () rather than using diluted mixture concentrations or the correct stock threshold ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total volume and the diluted concentration of .
You correctly applied the expression to find the required in the mixed solution.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou equated the equilibrium ion concentration in the combined mixture directly to the concentration of the incoming stock solution, forgetting that the added reagent also experiences dilution upon mixing.
REASONING PATH
Your ACEpath teacher’s suggested approach- Stock vs. Mixture Concentration
When two solutions mix, every incoming solute undergoes dilution: .
Always distinguish from by applying the volume ratio .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that is the concentration inside the combined volume.
Use the dilution relationship to find the incoming concentration: .
For part (b), compare either the incoming stock concentrations () or calculate to confirm no precipitate forms.
(a) ; (b) No precipitate forms because
03 The student forgets to account for dilution of the Ca(NO3)2 solution when mixing, using the undiluted Ca²⁺ concentration in the K_sp calculation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
When of solution is mixed with of solution, the total volume becomes . You must dilute the ions across the total combined volume before evaluating the precipitation threshold.
- Step 2Correct
Your algebraic setup and square-root evaluation using the expression were mathematically sound, but the result carries over the un-diluted from the previous step.
- Step 3Correct
You correctly applied the dilution factor to convert from the mixture concentration back to the incoming stock concentration. The final value is incorrect only due to the earlier error.
- Step 4
Since , a precipitate will not form.
CorrectSince (or ), no precipitate will form.
Your logic of comparing the given stock concentration against the minimum threshold concentration was valid, and led to the correct qualitative conclusion, but the threshold value compared against was incorrect.
WHAT YOU DID WELL
Compliments from Your TeacherYou wrote the correct solubility product expression .
You correctly recognized that the incoming solution undergoes dilution upon mixing.
You correctly reasoned that if the incoming concentration is below the minimum required threshold, no precipitate forms.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the stock concentration of directly instead of calculating its diluted concentration in the mixture.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhenever two aqueous solutions are combined, every dissolved solute is diluted into the combined total volume (). It is easy to remember dilution for the unknown species whose incoming concentration is being sought, but both solutions must be diluted before calculating or setting up .
REASONING PATH
Your ACEpath teacher’s suggested approach- Always find total volume first
When mixing solutions, .
Write down immediately and calculate for every incoming solution before setting up an equilibrium expression.
- Check both reacting ions for dilution
Both reacting ions experience a decrease in concentration due to the added volume of the other solution.
Confirm that neither ion's stock concentration is inserted directly into the expression without a volume correction.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the total volume: .
Find .
Set : .
Account for the dilution of incoming : .
(a) ; (b) No precipitate forms because (or ).
Lock it in
For a sparingly soluble salt , what is the general expression for ?
. The stoichiometric coefficients from the balanced equation become the exponents.
Similar question
A solution contains . Given that for is , calculate the minimum required to initiate precipitation.
Answer
.
Equal volumes ( each) of and are mixed. If , determine and state whether precipitates.
Answer
After mixing, and . . Since , no precipitate forms.
A sample of is mixed with of a solution. Given , find the minimum concentration of the incoming solution required to initiate precipitation.
Answer
. At threshold, . Accounting for dilution: .