Resources

Students are asked to predict the electrical conductivity and net acid-base character of 0.100 M0.100\text{ M} aqueous solutions of three salts: (1) sodium chloride (NaCl\text{NaCl}), (2) ammonium chloride (NH4Cl\text{NH}_4\text{Cl}, KaK_a of NH4+=5.60×10−10\text{NH}_4^+ = 5.60 \times 10^{-10}), and (3) sodium cyanide (NaCN\text{NaCN}, KbK_b of CN−=2.04×10−5\text{CN}^- = 2.04 \times 10^{-5}). Many students fall into the convention trap of assuming all neutral salts produce electrically neutral (pH=7.00\text{pH} = 7.00) solutions, or mistaking salt solutions for nonelectrolytes. For each solution: (a) identify whether the salt behaves as a strong electrolyte, weak electrolyte, or nonelectrolyte in terms of ion delivery, (b) write the spectator ions that remain inert, and (c) calculate the exact pH\text{pH} of each solution at 25∘C25^\circ\text{C}.

Answer and steps

Final answer

(a) All three salts (NaCl\text{NaCl}, NH4Cl\text{NH}_4\text{Cl}, NaCN\text{NaCN}) are strong electrolytes that dissociate 100%100\% into solvated ions. (b) Spectator ions: Na+\text{Na}^+ and Cl−\text{Cl}^- in NaCl\text{NaCl}; Cl−\text{Cl}^- in NH4Cl\text{NH}_4\text{Cl}; Na+\text{Na}^+ in NaCN\text{NaCN}. (c) Exact pH\text{pH} values: for NaCl\text{NaCl}, pH=7.00\text{pH} = 7.00; for NH4Cl\text{NH}_4\text{Cl}, [H3O+]=7.48×10−6 M[\text{H}_3\text{O}^+] = 7.48 \times 10^{-6}\text{ M} so pH=5.13\text{pH} = 5.13; for NaCN\text{NaCN}, [OH−]=1.43×10−3 M[\text{OH}^-] = 1.43 \times 10^{-3}\text{ M} yielding pOH=2.84\text{pOH} = 2.84 and pH=11.16\text{pH} = 11.16.

Steps

01

0.100 M NaCl0.100\text{ M }\ce{NaCl}

Part (a): Electrolyte Classification

A soluble ionic compound (salt) dissolves in water by completely dissociating into its constituent cations and anions:

  • Soluble salts are strong electrolytes regardless of whether the individual ions undergo subsequent hydrolysis (weak acid-base reactions).
  • The classification "strong electrolyte" refers to the extent of dissociation into free ions (≈100%\approx 100\%), which allows the solution to conduct electricity efficiently. Therefore, all three salts—NaCl\ce{NaCl}, NHX4Cl\ce{NH4Cl}, and NaCN\ce{NaCN}—are strong electrolytes.

Common Pitfall: A frequent mistake is classifying NHX4Cl\ce{NH4Cl} or NaCN\ce{NaCN} as weak electrolytes because NHX4X+\ce{NH4+} is a weak acid and CNX−\ce{CN-} is a weak base. While their secondary acid-base ionization with water is weak, their primary physical dissociation into ions upon dissolving is complete (100%100\%).


Part (b): Identification of Spectator Ions

An ion acts as a spectator (inert) ion if it does not react appreciably with water to affect the pH\text{pH}:

  1. Cations derived from strong bases: Group 1 cations (such as NaX+\ce{Na+}) and heavier Group 2 cations (CaX2+\ce{Ca^2+}, SrX2+\ce{Sr^2+}, BaX2+\ce{Ba^2+}) do not act as acids.
  2. Anions derived from strong monoprotic acids: The conjugate bases of strong acids (such as ClX−\ce{Cl-}, BrX−\ce{Br-}, IX−\ce{I-}, NOX3X−\ce{NO3-}, ClOX4X−\ce{ClO4-}) are negligible bases and do not accept protons from water. Applying these rules to each solution:
  • NaCl\ce{NaCl}: Both NaX+\ce{Na+} (conjugate cation of the strong base NaOH\ce{NaOH}) and ClX−\ce{Cl-} (conjugate base of the strong acid HCl\ce{HCl}) are inert. Spectator ions: NaX+\ce{Na+} and ClX−\ce{Cl-}.
  • NHX4Cl\ce{NH4Cl}: ClX−\ce{Cl-} is inert, but NHX4X+\ce{NH4+} is the conjugate acid of a weak base (NHX3\ce{NH3}) and undergoes hydrolysis. Spectator ion: ClX−\ce{Cl-}.
  • NaCN\ce{NaCN}: NaX+\ce{Na+} is inert, but CNX−\ce{CN-} is the conjugate base of a weak acid (HCN\ce{HCN}) and undergoes hydrolysis. Spectator ion: NaX+\ce{Na+}.

Part (c): Calculation of pH\text{pH} at 25∘C25^\circ\text{C}

Because neither NaX+\ce{Na+} nor ClX−\ce{Cl-} reacts with water, the self-ionization of water controls the hydronium ion concentration: [HX3OX+]=[OHX−]=1.0×10−7 M[\ce{H3O+}] = [\ce{OH-}] = 1.0 \times 10^{-7}\text{ M} pH=−log⁡10(1.0×10−7)=7.00\text{pH} = -\log_{10}(1.0 \times 10^{-7}) = 7.00


02

0.100 M NHX4Cl0.100\text{ M }\ce{NH4Cl}

The salt dissociates completely to give [NHX4X+]0=0.100 M[\ce{NH4+}]_0 = 0.100\text{ M}. The ammonium ion undergoes acid hydrolysis: NHX4X+(aq)+HX2O(l)⇌NHX3(aq)+HX3OX+(aq)\ce{NH4+(aq) + H2O(l) <=> NH3(aq) + H3O+(aq)}

Setting up an equilibrium expression where x=[HX3OX+]=[NHX3]x = [\ce{H3O+}] = [\ce{NH3}]: Ka=[NHX3][HX3OX+][NHX4X+]=x20.100−x=5.60×10−10K_a = \frac{[\ce{NH3}][\ce{H3O+}]}{[\ce{NH4+}]} = \frac{x^2}{0.100 - x} = 5.60 \times 10^{-10}

Since KaK_a is very small, assume 0.100−x≈0.1000.100 - x \approx 0.100: x2≈5.60×10−10⋅0.100=5.60×10−11x^2 \approx 5.60 \times 10^{-10} \cdot 0.100 = 5.60 \times 10^{-11} x=5.60×10−11=7.48×10−6 Mx = \sqrt{5.60 \times 10^{-11}} = 7.48 \times 10^{-6}\text{ M}

Checking the approximation: 7.48×10−60.100×100%≈0.0075%≪5%\frac{7.48 \times 10^{-6}}{0.100} \times 100\% \approx 0.0075\% \ll 5\%, so the simplification is valid.

Calculating the pH\text{pH}: pH=−log⁡10(7.48×10−6)=5.13\text{pH} = -\log_{10}(7.48 \times 10^{-6}) = 5.13


03

0.100 M NaCN0.100\text{ M }\ce{NaCN}

The salt dissociates completely to give [CNX−]0=0.100 M[\ce{CN-}]_0 = 0.100\text{ M}. The cyanide ion undergoes base hydrolysis: CNX−(aq)+HX2O(l)⇌HCN(aq)+OHX−(aq)\ce{CN-(aq) + H2O(l) <=> HCN(aq) + OH-(aq)}

Setting up an equilibrium expression where x=[OHX−]=[HCN]x = [\ce{OH-}] = [\ce{HCN}]: Kb=[HCN][OHX−][CNX−]=x20.100−x=2.04×10−5K_b = \frac{[\ce{HCN}][\ce{OH-}]}{[\ce{CN-}]} = \frac{x^2}{0.100 - x} = 2.04 \times 10^{-5}

Assuming 0.100−x≈0.1000.100 - x \approx 0.100: x2≈2.04×10−5⋅0.100=2.04×10−6x^2 \approx 2.04 \times 10^{-5} \cdot 0.100 = 2.04 \times 10^{-6} x=2.04×10−6=1.43×10−3 Mx = \sqrt{2.04 \times 10^{-6}} = 1.43 \times 10^{-3}\text{ M}

Checking the approximation: 1.43×10−30.100×100%=1.43%<5%\frac{1.43 \times 10^{-3}}{0.100} \times 100\% = 1.43\% < 5\%, which is well within the acceptable limit.

Now determine pOH\text{pOH} and pH\text{pH}: pOH=−log⁡10(1.43×10−3)=2.84\text{pOH} = -\log_{10}(1.43 \times 10^{-3}) = 2.84 pH=14.00−pOH=14.00−2.84=11.16\text{pH} = 14.00 - \text{pOH} = 14.00 - 2.84 = 11.16

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the weak acid/base character of the hydrolyzing ions with the electrolyte strength of the salts, incorrectly classifying NH4Cl and NaCN as weak electrolytes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NaCl\ce{NaCl}: strong electrolyte   ⟹  NHX4Cl\implies \ce{NH4Cl}: weak electrolyte   ⟹  NaCN\implies \ce{NaCN}: weak electrolyte

    Correct

    All three salts (NaCl\ce{NaCl}, NHX4Cl\ce{NH4Cl}, and NaCN\ce{NaCN}) are strong electrolytes.

    You correctly classified NaCl\ce{NaCl}, but soluble ionic salts such as NHX4Cl\ce{NH4Cl} and NaCN\ce{NaCN} dissociate essentially 100%100\% into solvated ions in water. Electrolyte strength measures total free-ion delivery for electrical conductivity, not whether the resulting ions act as weak acids or bases.

  2. Step 2

    NaCl\ce{NaCl}: NaX+\ce{Na+}, ClX−  ⟹  NHX4Cl\ce{Cl-} \implies \ce{NH4Cl}: ClX−  ⟹  NaCN\ce{Cl-} \implies \ce{NaCN}: NaX+\ce{Na+}

  3. Step 3

    NaCl\ce{NaCl}: pH=7.00  ⟹  NHX4X++HX2O⇌NHX3+HX3OX+  ⟹  Ka=x20.100=5.60×10−10  ⟹  x=7.48×10−6 M  ⟹  pH=−log⁡(7.48×10−6)=5.13\text{pH} = 7.00 \implies \ce{NH4+ + H2O <=> NH3 + H3O+} \implies K_a = \frac{x^2}{0.100} = 5.60 \times 10^{-10} \implies x = 7.48 \times 10^{-6}\text{ M} \implies \text{pH} = -\log(7.48 \times 10^{-6}) = 5.13

  4. Step 4

    CNX−+HX2O⇌HCN+OHX−  ⟹  Kb=x20.100=2.04×10−5  ⟹  x=1.43×10−3 M  ⟹  pOH=−log⁡(1.43×10−3)=2.84  ⟹  pH=14.00−2.84=11.16\ce{CN- + H2O <=> HCN + OH-} \implies K_b = \frac{x^2}{0.100} = 2.04 \times 10^{-5} \implies x = 1.43 \times 10^{-3}\text{ M} \implies \text{pOH} = -\log(1.43 \times 10^{-3}) = 2.84 \implies \text{pH} = 14.00 - 2.84 = 11.16

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the inert spectator ions for all three salt solutions.

You set up and solved the weak acid and weak base equilibrium expressions with total mathematical accuracy.

You converted [HX3OX+][\ce{H3O+}] and [OHX−][\ce{OH-}] into the exact target pH\text{pH} values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Electrolyte Strength with Acid-Base Strength

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the secondary acid-base ionization (hydrolysis) of an ion in water with the primary dissolution/dissociation of the ionic compound itself. Because NHX4X+\ce{NH4+} has a small KaK_a and CNX−\ce{CN-} has a small KbK_b, you classified the parent salts as weak electrolytes, overlooking that soluble salts dissociate 100%100\% into solvated cations and anions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dissolution vs. Hydrolysis
  • Electrolyte classification depends entirely on how completely a substance forms ions upon dissolving in water (≈100%{\approx}100\% for strong electrolytes; partial for weak electrolytes; none for molecular nonelectrolytes).

  • Classify every soluble ionic salt as a strong electrolyte, regardless of whether its individual ions act as weak acids or weak bases in secondary reactions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Check the bonding and solubility of the compound: NHX4Cl\ce{NH4Cl} and NaCN\ce{NaCN} are soluble ionic salts composed of cations and anions.

  2. Write the initial dissociation step in water: NHX4Cl(s)→NHX4X+(aq)+ClX−(aq)\ce{NH4Cl(s) -> NH4+(aq) + Cl-(aq)} and NaCN(s)→NaX+(aq)+CNX−(aq)\ce{NaCN(s) -> Na+(aq) + CN-(aq)}. Both proceed to completion (100%100\%).

  3. Conclude that because they provide a high concentration of mobile ions in solution, both salts are strong electrolytes.

Final answer

All three salts (NaCl\ce{NaCl}, NHX4Cl\ce{NH4Cl}, and NaCN\ce{NaCN}) are strong electrolytes.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing the primary physical dissociation of a salt from the secondary chemical equilibrium of ion hydrolysis.

  • Remember that weak electrolytes are typically molecular weak acids (such as CHX3COOH\ce{CH3COOH} or HCN\ce{HCN}) or weak bases (such as NHX3\ce{NH3}), never soluble ionic salts.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the hydroxide ion concentration from Kb for NaCN but forgets to convert pOH to pH, reporting pOH directly as the pH.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NaCl: strong electrolyte,NHX4Cl: strong electrolyte,NaCN: strong electrolyte\ce{NaCl}\text{: strong electrolyte}, \ce{NH4Cl}\text{: strong electrolyte}, \ce{NaCN}\text{: strong electrolyte}

  2. Step 2

    NaCl: NaX+,ClX−;NHX4Cl: ClX−;NaCN: NaX+\ce{NaCl}\text{: }\ce{Na+}, \ce{Cl-}; \ce{NH4Cl}\text{: }\ce{Cl-}; \ce{NaCN}\text{: }\ce{Na+}

  3. Step 3

    NaCl: pH=7.00\ce{NaCl}\text{: }\text{pH} = 7.00

  4. Step 4

    NHX4X++HX2O⇌NHX3+HX3OX+  ⟹  x=5.60×10−10×0.100=7.48×10−6 M  ⟹  pH=−log⁡(7.48×10−6)=5.13\ce{NH4+ + H2O <=> NH3 + H3O+} \implies x = \sqrt{5.60 \times 10^{-10} \times 0.100} = 7.48 \times 10^{-6}\text{ M} \implies \text{pH} = -\log(7.48 \times 10^{-6}) = 5.13

  5. Step 5

    CNX−+HX2O⇌HCN+OHX−  ⟹  x=2.04×10−5×0.100=1.43×10−3 M  ⟹  pH=−log⁡(1.43×10−3)=2.84\ce{CN- + H2O <=> HCN + OH-} \implies x = \sqrt{2.04 \times 10^{-5} \times 0.100} = 1.43 \times 10^{-3}\text{ M} \implies \text{pH} = -\log(1.43 \times 10^{-3}) = 2.84

    Correct

    [OHX−]=1.43×10−3 M  ⟹  pOH=2.84  ⟹  pH=14.00−2.84=11.16[\ce{OH-}] = 1.43 \times 10^{-3}\text{ M} \implies \text{pOH} = 2.84 \implies \text{pH} = 14.00 - 2.84 = 11.16

    In base hydrolysis, the variable xx represents [OHX−][\ce{OH-}], so taking −log⁡(x)-\log(x) yields pOH=2.84\text{pOH} = 2.84. Because NaCN\ce{NaCN} is the salt of a weak acid and strong base, the solution is basic; you must subtract pOH\text{pOH} from 14.0014.00 to obtain pH=11.16\text{pH} = 11.16.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified all three salts as strong electrolytes based on complete physical dissociation.

You correctly picked out the inert spectator ions for each solution.

You set up both weak acid and weak base hydrolysis expressions flawlessly and solved for the equilibrium ion concentrations with valid approximations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing pOH with pH

You calculated −log⁡[OHX−]-\log[\ce{OH-}] and labeled it as pH=2.84\text{pH} = 2.84, forgetting that [OHX−][\ce{OH-}] yields pOH\text{pOH}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the identity of the generated species ([OHX−][\ce{OH-}] vs. [HX3OX+][\ce{H3O+}]) in the hydrolysis equilibrium, leading to omitting the final pH=14.00−pOH\text{pH} = 14.00 - \text{pOH} conversion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Identity of $x$
  • For a base equilibrium producing OHX−\ce{OH-}, x=[OHX−]x = [\ce{OH-}], which means −log⁡x=pOH-\log x = \text{pOH}.

  • Always write down the label [OHX−]=x[\ce{OH-}] = x before taking the negative logarithm so you remember you are computing pOH\text{pOH}.

Sanity Check Acid-Base Character
  • A solution containing a weak base anion (like CNX−\ce{CN-}) must produce a basic solution with pH>7.00\text{pH} > 7.00 at 25∘C25^\circ\text{C}.

  • If your calculated pH\text{pH} for a basic salt is less than 7.007.00, immediately check whether you calculated pOH\text{pOH} instead of pH\text{pH}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. From your equilibrium step, [OHX−]=1.43×10−3 M[\ce{OH-}] = 1.43 \times 10^{-3}\text{ M}.

  2. Calculate the hydroxide ion potential: pOH=−log⁡10(1.43×10−3)=2.84\text{pOH} = -\log_{10}(1.43 \times 10^{-3}) = 2.84.

  3. Apply the relation at 25∘C25^\circ\text{C}: pH=14.00−pOH=14.00−2.84=11.16\text{pH} = 14.00 - \text{pOH} = 14.00 - 2.84 = 11.16.

Final answer

pH=11.16\text{pH} = 11.16

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to distinguish acid hydrolysis ([HX3OX+][\ce{H3O+}] produced) from base hydrolysis ([OHX−][\ce{OH-}] produced).

  • Practice converting pOH\text{pOH} to pH\text{pH} for basic solutions.

  • Always perform a qualitative check: basic solutions must have pH>7\text{pH} > 7.

OverviewACEpath Teacher's Diagnosis

03 The student assumes that all salts produce completely neutral solutions, concluding that the pH of all three solutions is 7.00 and that all ions are inert spectators.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NaCl: strong electrolyte  ⟹  NH4Cl: strong electrolyte  ⟹  NaCN: strong electrolyte\text{NaCl}\text{: strong electrolyte} \implies \text{NH}_4\text{Cl}\text{: strong electrolyte} \implies \text{NaCN}\text{: strong electrolyte}

  2. Step 2

    NaCl: Na+,Cl−  ⟹  NH4Cl: NH4+,Cl−  ⟹  NaCN: Na+,CN−\text{NaCl}\text{: }\text{Na}^+, \text{Cl}^- \implies \text{NH}_4\text{Cl}\text{: }\text{NH}_4^+, \text{Cl}^- \implies \text{NaCN}\text{: }\text{Na}^+, \text{CN}^-

    Correct

    NaCl: Na+,Cl−; NH4Cl: Cl−; NaCN: Na+\text{NaCl}\text{: }\text{Na}^+, \text{Cl}^- \text{; } \text{NH}_4\text{Cl}\text{: }\text{Cl}^- \text{; } \text{NaCN}\text{: }\text{Na}^+

    You listed every constituent ion from dissociation instead of filtering for inert spectator ions. Conjugate ions of weak species react with water: NH4+\text{NH}_4^+ is the conjugate acid of weak base NH3\text{NH}_3 and hydrolyzes, so only Cl−\text{Cl}^- is a spectator in NH4Cl\text{NH}_4\text{Cl}. Likewise, CN−\text{CN}^- is the conjugate base of weak acid HCN\text{HCN} and hydrolyzes, so only Na+\text{Na}^+ is a spectator in NaCN\text{NaCN}.

  3. Step 3

    NaCl: pH=7.00  ⟹  NH4Cl: pH=7.00  ⟹  NaCN: pH=7.00\text{NaCl}\text{: pH} = 7.00 \implies \text{NH}_4\text{Cl}\text{: pH} = 7.00 \implies \text{NaCN}\text{: pH} = 7.00

    Correct

    NaCl: pH=7.00  ⟹  NH4Cl: pH=5.13  ⟹  NaCN: pH=11.16\text{NaCl}\text{: pH} = 7.00 \implies \text{NH}_4\text{Cl}\text{: pH} = 5.13 \implies \text{NaCN}\text{: pH} = 11.16

    Because NH4+\text{NH}_4^+ and CN−\text{CN}^- undergo hydrolysis, their solutions are not neutral. Acid hydrolysis of NH4+\text{NH}_4^+ yields [H3O+]=Ka⋅C=7.48×10−6 M[\text{H}_3\text{O}^+] = \sqrt{K_a \cdot C} = 7.48 \times 10^{-6}\text{ M} (pH=5.13\text{pH} = 5.13), and base hydrolysis of CN−\text{CN}^- yields [OH−]=Kb⋅C=1.43×10−3 M[\text{OH}^-] = \sqrt{K_b \cdot C} = 1.43 \times 10^{-3}\text{ M} (pH=11.16\text{pH} = 11.16).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified all three soluble ionic compounds as strong electrolytes based on their complete dissociation into ions in water.

You correctly identified the neutral character and pH=7.00\text{pH} = 7.00 of the NaCl\text{NaCl} solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Salt Hydrolysis Misconception

No, this is a conceptual misunderstanding rather than a calculation slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated all salt solutions as chemically neutral and assumed all dissociated ions are spectators, overlooking that conjugate partners of weak acids and weak bases hydrolyze in water to change the solution pH.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying Spectator Ions
  • Only conjugate ions of strong acids (e.g., Cl−\text{Cl}^-, Br−\text{Br}^-, NO3−\text{NO}_3^-) and strong bases (Group 1 cations, heavy Group 2 cations) are inert spectators.

  • Inspect each ion in the salt: if an ion comes from a weak acid or weak base, it will undergo hydrolysis and is not a spectator ion.

Calculating pH of Hydrolyzing Salts
  • For a salt containing a weak conjugate acid cation, use Ka=[H3O+][B][BH+]K_a = \frac{[\text{H}_3\text{O}^+][\text{B}]}{[\text{BH}^+]}. For a weak conjugate base anion, use Kb=[OH−][HA][A−]K_b = \frac{[\text{OH}^-][\text{HA}]}{[\text{A}^-]}.

  • Set up an ICE table or the weak-species approximation x=K⋅Cx = \sqrt{K \cdot C} using the ion concentration from dissociation, then convert to pH.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine which ions hydrolyze: in 0.100 M NH4Cl0.100\text{ M }\text{NH}_4\text{Cl}, Cl−\text{Cl}^- is inert and NH4+\text{NH}_4^+ acts as a weak acid; in 0.100 M NaCN0.100\text{ M }\text{NaCN}, Na+\text{Na}^+ is inert and CN−\text{CN}^- acts as a weak base.

  2. Calculate [H3O+][\text{H}_3\text{O}^+] for NH4Cl\text{NH}_4\text{Cl}: [H3O+]=Ka⋅[NH4+]=(5.60×10−10)(0.100)=7.48×10−6 M[\text{H}_3\text{O}^+] = \sqrt{K_a \cdot [\text{NH}_4^+]} = \sqrt{(5.60 \times 10^{-10})(0.100)} = 7.48 \times 10^{-6}\text{ M}, so pH=−log⁡10(7.48×10−6)=5.13\text{pH} = -\log_{10}(7.48 \times 10^{-6}) = 5.13.

  3. Calculate [OH−][\text{OH}^-] for NaCN\text{NaCN}: [OH−]=Kb⋅[CN−]=(2.04×10−5)(0.100)=1.43×10−3 M[\text{OH}^-] = \sqrt{K_b \cdot [\text{CN}^-]} = \sqrt{(2.04 \times 10^{-5})(0.100)} = 1.43 \times 10^{-3}\text{ M}, yielding pOH=2.84\text{pOH} = 2.84 and pH=14.00−2.84=11.16\text{pH} = 14.00 - 2.84 = 11.16.

Final answer

(a) All three salts are strong electrolytes. (b) Spectator ions: Na+\text{Na}^+ and Cl−\text{Cl}^- in NaCl\text{NaCl}; Cl−\text{Cl}^- in NH4Cl\text{NH}_4\text{Cl}; Na+\text{Na}^+ in NaCN\text{NaCN}. (c) pH\text{pH} values: NaCl=7.00\text{NaCl} = 7.00, NH4Cl=5.13\text{NH}_4\text{Cl} = 5.13, NaCN=11.16\text{NaCN} = 11.16.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice categorizing common cations and anions as neutral spectators versus acidic/basic hydrolyzing ions.

  • Review the equilibrium expressions for weak acid cation hydrolysis (KaK_a) and weak base anion hydrolysis (KbK_b).

  • Complete the targeted flashcards and practice problems to solidify predicting salt solution pH.

Lock it in

Similar question

01

Classify potassium nitrite (KNOX2\ce{KNO2}, KaK_a of HNOX2=4.0×10−4\ce{HNO2} = 4.0 \times 10^{-4}) as a strong electrolyte, weak electrolyte, or nonelectrolyte, and state the spectator ion(s) in an aqueous solution.

Answer

KNOX2\ce{KNO2} is a strong electrolyte because it is a soluble ionic salt that completely dissociates into KX+\ce{K+} and NOX2X−\ce{NO2-}. The spectator ion is KX+\ce{K+}, as the alkali metal cation does not react with water, whereas NOX2X−\ce{NO2-} undergoes weak base hydrolysis.

02

A student measures the electrical conductivity of two beakers: Beaker A contains 0.10 M HF0.10\text{ M }\ce{HF} (Ka=6.8×10−4K_a = 6.8 \times 10^{-4}) and Beaker B contains 0.10 M NHX4F0.10\text{ M }\ce{NH4F}. Predict which beaker will light a conductivity bulb brightly and explain why using electrolyte classifications.

Answer

Beaker B will light the bulb brightly. NHX4F\ce{NH4F} is a soluble ionic salt (strong electrolyte) that dissociates 100%100\% to provide 0.20 M0.20\text{ M} total ions. In contrast, HF\ce{HF} is a molecular weak acid (weak electrolyte) that ionizes only slightly (≈8%{\approx}8\%), providing very few conducting ions.

03

Consider a 0.050 M0.050\text{ M} solution of ammonium acetate, NHX4CHX3COO\ce{NH4CH3COO} (KaK_a of NHX4X+=5.6×10−10\ce{NH4+} = 5.6 \times 10^{-10}, KbK_b of CHX3COOX−=5.6×10−10\ce{CH3COO-} = 5.6 \times 10^{-10}). Identify its electrolyte classification, identify any spectator ions, and determine its pH\text{pH} at 25∘C25^\circ\text{C}.

Answer

Electrolyte classification: Strong electrolyte (dissociates 100%100\% into NHX4X+\ce{NH4+} and CHX3COOX−\ce{CH3COO-}). Spectator ions: None, because both the cation and anion undergo hydrolysis. pH=7.00\text{pH} = 7.00, because Ka(NHX4X+)=Kb(CHX3COOX−)K_a(\ce{NH4+}) = K_b(\ce{CH3COO-}), meaning the production of HX3OX+\ce{H3O+} exactly balances OHX−\ce{OH-}.

Loading workspace…