Resources
A chemical engineer analyzes a newly designed electrochemical gas pump. During one operating cycle, an electric motor outside the cell delivers of electrical work onto the gas inside the cell (), while the gas simultaneously contracts from to under a constant atmospheric pressure of (). During this period, the system transfers of thermal energy to the cooling jacket. Adopting the standard thermodynamic convention where , calculate the total work performed on the system () and the net change in internal energy () of the gas system.
Answer and steps
Final answer
and .
Steps
Establish the Sign Convention
To determine the total work done on the system () and the overall change in internal energy (), we break the problem into sign conventions, pressure-volume work, and the First Law of Thermodynamics.
In chemistry, the standard thermodynamic convention states:
- Energy entering the system (heat absorbed or work done on the system) is positive ().
- Energy leaving the system (heat released or work done by the system) is negative ().
From the problem statement:
- Electrical work done on the gas: .
- Heat transferred to the surroundings (cooling jacket): .
Calculate Pressure-Volume Work ()
For a system under constant external pressure, pressure-volume work is given by:
Calculate the change in volume ():
Now calculate in units of :
Convert this work into joules using :
(Common Pitfall: Forgetting the negative sign in . Because the gas contracts, , which means the surroundings do work on the gas, making positive.)
Calculate Total Work ()
The total work performed on the system is the sum of the mechanical () work and non-expansion (electrical) work:
Calculate Net Change in Internal Energy ()
Apply the First Law of Thermodynamics:
Thus, the total work performed on the system is , and the net change in internal energy is .
Typical errors
01 The student forgets the negative sign in the thermodynamic definition of boundary work w_pv = -PΔV, treating compression work done on the system as negative.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You omitted the negative sign in the thermodynamic boundary work definition . When a gas is compressed (), the surroundings do work on the gas, so must be positive.
- Step 3Correct
Your addition formula is correct, but the result is affected by the sign error from Step 2.
- Step 4
- Step 5Correct
You correctly set up the First Law equation , but your numerical answer is affected by the propagated error in .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the volume change as final volume minus initial volume.
You correctly identified that releasing heat to the surroundings corresponds to a negative value for .
You correctly applied the First Law relationship .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou used instead of the thermodynamic convention , forgetting that compressing a system transfers energy into it ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Thermodynamic Work Definition
For constant external pressure, expansion/compression work is defined as .
Always include the leading negative sign in so that compression () yields positive work done on the system.
- Physical Intuition Sanity Check
Work done on the system adds energy into the system (); work done by the system removes energy ().
Before moving to subsequent steps, verify whether the surroundings are pushing on the system (compression ) or the system is pushing outwards (expansion ).
CORRECTED PATH
ACEpath Teacher's DemonstrationUse .
Convert to joules: .
Compute total work: .
Compute internal energy change: .
,
02 The student misinterprets heat transferred to the cooling jacket as heat absorbed by the system, using q = +410 J instead of q = -410 J.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Because the system releases thermal energy to the cooling jacket (the surroundings), the heat flow must be negative ().
- Step 4Correct
Your formula for the First Law is correct, but substituting the positive heat value led to an incorrect final change in internal energy.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated and applied the negative sign convention for compression work.
You accurately combined mechanical and non-mechanical work to evaluate .
You stated the correct mathematical form of the First Law of Thermodynamics, .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou interpreted thermal energy leaving the system as a positive quantity rather than applying the standard thermodynamic convention where energy exiting the system is negative.
REASONING PATH
Your ACEpath teacher’s suggested approach- Thermodynamic Sign Convention for Heat
Heat absorbed by the system from the surroundings is positive (); heat transferred from the system to the surroundings is negative ().
Identify the system boundary and note the direction of heat flow: if heat goes into the surroundings or a cooling medium, set to a negative value.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the direction of heat transfer: the gas loses to the cooling jacket, so .
Substitute and into the First Law: .
and
03 The student subtracts the initial volume from the final volume in reverse order as ΔV = V_initial - V_final, leading to an incorrect sign for w_pv.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Any state change is defined strictly as final minus initial (). Because the gas contracts from to , must be negative.
- Step 2Correct
You used the correct equation and conversion factor, but substituting a positive gave instead of .
- Step 3Correct
You properly added the non-expansion electrical work, but this step inherited the incorrect sign from .
- Step 4Correct
You assigned the correct negative sign for heat transferred to the cooling jacket and correctly applied the First Law , but the calculation carries the propagated error from .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the formula including the negative sign.
You accurately converted to joules using .
You correctly assigned a negative sign to heat released to the surroundings ().
You correctly identified that electrical work delivered onto the gas adds positively to the system ().
You set up the First Law of Thermodynamics accurately as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set up as instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou subtracted the smaller volume from the larger volume to keep the intermediate difference positive, rather than strictly following the formal thermodynamic definition . Whenever a gas is compressed, the surroundings perform work on the system, so must be positive.
REASONING PATH
Your ACEpath teacher’s suggested approach- Universal Definition of Delta (Δ)
For any thermodynamic state variable , .
Write down explicitly with labels before substituting numerical values.
- Physical Sign Sanity Check for Work
Compression () means the surroundings push in on the gas, so work is done ON the system (). Expansion means the gas pushes out, so work is done BY the system ().
Check whether the gas contracted or expanded before proceeding to find total work.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate change in volume: .
Calculate pressure-volume work: .
Calculate total work: .
Calculate net internal energy change: .
and
Lock it in
What is the formula for boundary work () performed on a system at constant external pressure ?
. The negative sign ensures work done on the system during compression () is positive.
Similar question
A cylinder containing an ideal gas is compressed at a constant external pressure of from an initial volume of to a final volume of . During this compression, the gas releases of heat to the surroundings. Calculate the boundary work done on the gas (in joules) and the net change in internal energy ().
Answer
and .
- .
- .
- Convert to joules: .
- Heat released means .
- .
An electrochemical cell acts on an enclosed gas system. A stirrer does of mechanical work on the gas (). At the same time, the gas expands from to against a constant pressure of (). If the internal energy of the system increases by (), determine the heat exchange and state whether heat is absorbed or released by the system.
Answer
(heat is absorbed by the system).
- .
- .
- Convert to joules: .
- Total work: .
- From , we have .
A gas sample undergoes a two-stage process: in Stage 1, it is compressed from to at a constant external pressure of while absorbing of heat. In Stage 2, it is heated at constant volume, absorbing an additional of heat while an internal electrical heater supplies of work to the gas. For the entire two-stage process, calculate the total work done on the system (), total heat added (), and the overall change in internal energy (). ().
Answer
, , and .
- Stage 1 boundary work: .
- Stage 2 work: Constant volume means , but electrical work is added: . Thus .
- Total work: .
- Total heat: .
- Overall change in internal energy: .