Resources

A 250.0 mL250.0\text{ mL} aqueous environmental runoff sample contains dissolved poly(ethylene glycol) (PEG) with a repeating unit formula −CH2CH2O−-\text{CH}_2\text{CH}_2\text{O}- (M0=44.05 g/molM_0 = 44.05\text{ g/mol}) and a uniform degree of polymerization n=50.0n = 50.0. Analytical chromatography determines that the total PEG concentration is 88.1 ppm88.1\text{ ppm} (where 1 ppm=1.00 mg/L1\text{ ppm} = 1.00\text{ mg/L}). Calculate: (a) the molar mass of the PEG chain (excluding end groups), and (b) the molar concentration of PEG macromolecules in the runoff expressed in μmol/L\mu\text{mol/L}.

Answer and steps

Final answer

(a) M=2.20×103 g/molM = 2.20 \times 10^3\text{ g/mol}; (b) C=40.0 μmol/LC = 40.0\text{ }\mu\text{mol/L}

Steps

Part (a): Molar Mass of the Polymer Chain

The degree of polymerization (nn) represents the total number of repeating monomer units in a single polymer chain. The molar mass of the polymer chain (MM), excluding end groups, is given by:

M=n⋅M0M = n \cdot M_0

Where:

  • n=50.0n = 50.0 (degree of polymerization)
  • M0=44.05 g/molM_0 = 44.05\text{ g/mol} (molar mass of the −CHX2CHX2O−\ce{-CH2CH2O-} repeating unit)

Substitute the given values into the equation:

M=50.0⋅44.05 g/mol=2202.5 g/molM = 50.0 \cdot 44.05\text{ g/mol} = 2202.5\text{ g/mol}

Rounding to three significant figures gives:

M=2.20×103 g/molM = 2.20 \times 10^3\text{ g/mol}


Part (b): Molar Concentration of PEG Macromolecules

  1. Convert parts per million (ppm\text{ppm}) to mass concentration: By definition for dilute aqueous solutions: 1 ppm=1.00 mg/L=1.00×10−3 g/L1\text{ ppm} = 1.00\text{ mg/L} = 1.00 \times 10^{-3}\text{ g/L} Therefore, the mass concentration (ρPEG\rho_{\text{PEG}}) is: ρPEG=88.1 mg/L=0.0881 g/L\rho_{\text{PEG}} = 88.1\text{ mg/L} = 0.0881\text{ g/L}
  2. Calculate the molar concentration (CC): Molar concentration is defined as the mass concentration divided by the molar mass: C=ρPEGMC = \frac{\rho_{\text{PEG}}}{M}

    Using the unrounded molar mass (M=2202.5 g/molM = 2202.5\text{ g/mol}) to maintain precision: C=0.0881 g/L2202.5 g/mol≈4.00×10−5 mol/LC = \frac{0.0881\text{ g/L}}{2202.5\text{ g/mol}} \approx 4.00 \times 10^{-5}\text{ mol/L}

  3. Convert to μmol/L\mu\text{mol/L}: Since 1 mol=106 μmol1\text{ mol} = 10^6\text{ }\mu\text{mol}: C=4.00×10−5 mol/L⋅106 μmol/mol=40.0 μmol/LC = 4.00 \times 10^{-5}\text{ mol/L} \cdot 10^6\text{ }\mu\text{mol/mol} = 40.0\text{ }\mu\text{mol/L}

(Note: The total sample volume of 250.0 mL250.0\text{ mL} is an intensive/extrinsic reference not required for determining concentration, as both ppm and molarity are already normalized per liter.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the molar concentration of the repeating units instead of macromolecules by using the monomer molar mass rather than the total polymer chain molar mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    M=50.0×44.05 g/mol=2202.5 g/molM = 50.0 \times 44.05\text{ g/mol} = 2202.5\text{ g/mol}

  2. Step 2

    88.1 ppm=88.1 mg/L=0.0881 g/L88.1\text{ ppm} = 88.1\text{ mg/L} = 0.0881\text{ g/L}

  3. Step 3

    C=0.0881 g/L44.05 g/molC = \frac{0.0881\text{ g/L}}{44.05\text{ g/mol}}

    Correct

    C=ρPEGM=0.0881 g/L2202.5 g/molC = \frac{\rho_{\text{PEG}}}{M} = \frac{0.0881\text{ g/L}}{2202.5\text{ g/mol}}

    You used the repeating unit molar mass (44.05 g/mol44.05\text{ g/mol}) instead of the macromolecule molar mass (2202.5 g/mol2202.5\text{ g/mol}). Because the question asks for the concentration of PEG macromolecules, you must divide the total polymer mass by the entire chain's molar mass.

  4. Step 4

    C=2.00×10−3 mol/L=2000 μmol/LC = 2.00 \times 10^{-3}\text{ mol/L} = 2000\text{ }\mu\text{mol/L}

    Correct

    C≈4.00×10−5 mol/L=40.0 μmol/LC \approx 4.00 \times 10^{-5}\text{ mol/L} = 40.0\text{ }\mu\text{mol/L}

    Your arithmetic and conversion to μmol/L\mu\text{mol/L} are mathematically consistent with your previous value, but the final answer is off by a factor of n=50.0n = 50.0 due to the substituted molar mass in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the total molar mass of the polymer chain accurately in part (a).

You correctly translated ppm into mass concentration units of g/L\text{g/L}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Repeat unit vs. macromolecule molar mass confusion

You accidentally grabbed the monomer unit molar mass M0M_0 instead of the total chain molar mass MM calculated in part (a).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the concentration of polymer repeating units with the concentration of intact macromolecular chains.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the target entity
  • When calculating the molar concentration of a polymer, C=ρMC = \frac{\rho}{M}, where MM is the molar mass of the entire macromolecule (n⋅M0n \cdot M_0), not the repeat unit (M0M_0).

  • Check whether the question asks for the concentration of 'macromolecules/chains' or 'repeating units'.

Verify scaling with polymerization degree
  • Since each macromolecule contains nn repeat units, Cmacromolecule=Crepeat unitnC_{\text{macromolecule}} = \frac{C_{\text{repeat unit}}}{n}.

  • Confirm that the macromolecule molar concentration is nn times smaller than the monomer repeat unit concentration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the mass concentration by the macromolecular molar mass: C=0.0881 g/L2202.5 g/mol≈4.00×10−5 mol/LC = \frac{0.0881\text{ g/L}}{2202.5\text{ g/mol}} \approx 4.00 \times 10^{-5}\text{ mol/L}.

  2. Convert to μmol/L\mu\text{mol/L} using 1 mol=106 μmol1\text{ mol} = 10^6\text{ }\mu\text{mol}: C=4.00×10−5 mol/L×106 μmol/mol=40.0 μmol/LC = 4.00 \times 10^{-5}\text{ mol/L} \times 10^6\text{ }\mu\text{mol/mol} = 40.0\text{ }\mu\text{mol/L}.

Final answer

(a) M=2.20×103 g/molM = 2.20 \times 10^3\text{ g/mol}; (b) C=40.0 μmol/LC = 40.0\text{ }\mu\text{mol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between monomer repeat unit molarity and polymer chain molarity.

  • Practice using the total macromolecular molar mass M=n⋅M0M = n \cdot M_0 in solution stoichiometry calculations.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly multiplies the concentration by the 250.0 mL sample volume instead of dividing total moles by volume, calculating absolute moles in μmol rather than concentration in μmol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    M=50.0×44.05 g/mol=2202.5 g/molM = 50.0 \times 44.05\text{ g/mol} = 2202.5\text{ g/mol}

  2. Step 2

    88.1 ppm=88.1 mg/L  ⟹  mass=88.1 mg/L×0.2500 L=22.025 mg88.1\text{ ppm} = 88.1\text{ mg/L} \implies \text{mass} = 88.1\text{ mg/L} \times 0.2500\text{ L} = 22.025\text{ mg}

  3. Step 3

    moles=22.025 mg2202.5 g/mol=0.0100 mmol=10.0 μmol\text{moles} = \frac{22.025\text{ mg}}{2202.5\text{ g/mol}} = 0.0100\text{ mmol} = 10.0\text{ }\mu\text{mol}

  4. Step 4

    C=10.0 μmol/LC = 10.0\text{ }\mu\text{mol/L}

    Correct

    C=nV=10.0 μmol0.2500 L=40.0 μmol/LC = \frac{n}{V} = \frac{10.0\text{ }\mu\text{mol}}{0.2500\text{ L}} = 40.0\text{ }\mu\text{mol/L} (or C=88.1 mg/L2202.5 g/mol×103 μmol/mmol=40.0 μmol/LC = \frac{88.1\text{ mg/L}}{2202.5\text{ g/mol}} \times 10^3\text{ }\mu\text{mol/mmol} = 40.0\text{ }\mu\text{mol/L})

    You wrote the absolute quantity (10.0 μmol10.0\text{ }\mu\text{mol}) as the concentration (10.0 μmol/L10.0\text{ }\mu\text{mol/L}) without dividing by the sample volume (0.2500 L0.2500\text{ L}). Concentration is an intensive property and must equal moles divided by volume.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the polymer molar mass from the degree of polymerization and monomer formula weight.

You correctly converted ppm\text{ppm} to mg/L\text{mg/L}.

You accurately computed the total moles of polymer present in the 250.0 mL250.0\text{ mL} sample.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating amount of substance with concentration

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the absolute amount of substance (n=10.0 μmoln = 10.0\text{ }\mu\text{mol}) as a concentration (C=10.0 μmol/LC = 10.0\text{ }\mu\text{mol/L}). Because concentration is already normalized per liter (88.1 mg/L88.1\text{ mg/L}), multiplying by the sample volume was an unnecessary detour unless you also remembered to divide by V=0.2500 LV = 0.2500\text{ L} at the end.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Extensive Amount from Intensive Concentration
  • Amount n (in μmol)\text{Amount } n\text{ (in }\mu\text{mol)} is extensive and depends on sample volume, whereas concentration C=nV (in μmol/L)\text{concentration } C = \frac{n}{V}\text{ (in }\mu\text{mol/L)} is intensive and independent of sample volume.

  • Check your units at the final step: if you calculated an absolute amount in μmol\mu\text{mol}, divide it by the volume in L\text{L} to report μmol/L\mu\text{mol/L}.

Direct Route for Concentration Conversions
  • C=ρMC = \frac{\rho}{M}, where ρ\rho is mass concentration (e.g., g/L\text{g/L} or mg/L\text{mg/L}) and MM is molar mass.

  • Convert directly from mass concentration (mg/L\text{mg/L}) to molar concentration (μmol/L\mu\text{mol/L}) without introducing sample volume.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. C=nPEGVC = \frac{n_{\text{PEG}}}{V}

  2. C=10.0 μmol0.2500 L=40.0 μmol/LC = \frac{10.0\text{ }\mu\text{mol}}{0.2500\text{ L}} = 40.0\text{ }\mu\text{mol/L}

Final answer

(a) M=2.20×103 g/molM = 2.20 \times 10^3\text{ g/mol}; (b) C=40.0 μmol/LC = 40.0\text{ }\mu\text{mol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • When asked for a concentration, convert directly from mass concentration (mg/L\text{mg/L}) to molarity (mol/L\text{mol/L} or μmol/L\mu\text{mol/L}) using molar mass alone.

  • If you calculate total mass or total moles using a given aliquot volume, always complete the calculation by dividing by volume (C=n/VC = n / V) to return to concentration.

OverviewACEpath Teacher's Diagnosis

03 The student mismanages unit conversion between mol/L and μmol/L by multiplying by 10³ instead of 10⁶, confusing micromolar with millimolar.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    M=50.0×44.05 g/mol=2202.5 g/molM = 50.0 \times 44.05\text{ g/mol} = 2202.5\text{ g/mol}

  2. Step 2

    88.1 ppm=0.0881 g/L  ⟹  C=0.0881 g/L2202.5 g/mol=4.00×10−5 mol/L88.1\text{ ppm} = 0.0881\text{ g/L} \implies C = \frac{0.0881\text{ g/L}}{2202.5\text{ g/mol}} = 4.00 \times 10^{-5}\text{ mol/L}

  3. Step 3

    C=4.00×10−5×103=0.0400 μmol/LC = 4.00 \times 10^{-5} \times 10^3 = 0.0400\text{ }\mu\text{mol/L}

    Correct

    C=4.00×10−5 mol/L×106 μmol/mol=40.0 μmol/LC = 4.00 \times 10^{-5}\text{ mol/L} \times 10^6\text{ }\mu\text{mol/mol} = 40.0\text{ }\mu\text{mol/L}

    You multiplied by 10310^3 instead of 10610^6. The prefix micro- (μ\mu) represents 10−610^{-6}, meaning 1 mol=106 μmol1\text{ mol} = 10^6\text{ }\mu\text{mol}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the molar mass of the polymer chain from the degree of polymerization and monomer molar mass.

You correctly recognized that 1 ppm=1 mg/L1\text{ ppm} = 1\text{ mg/L} and converted the mass concentration to g/L\text{g/L}.

You correctly computed the concentration in mol/L\text{mol/L} by dividing mass concentration by molar mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Prefix conversion error (milli vs. micro)

You substituted the conversion factor for millimoles (103 mmol/mol10^3\text{ mmol/mol}) instead of micromoles (106 μmol/mol10^6\text{ }\mu\text{mol/mol}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the SI metric prefixes milli- (10−310^{-3}) and micro- (10−610^{-6}) during molar concentration unit conversion.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Prefix Values
  • milli-=10−3  ⟹  1 mol=103 mmol\text{milli-} = 10^{-3} \implies 1\text{ mol} = 10^3\text{ mmol}; micro-=10−6  ⟹  1 mol=106 μmol\text{micro-} = 10^{-6} \implies 1\text{ mol} = 10^6\text{ }\mu\text{mol}.

  • Always write out dimensional analysis explicitly with units canceling out: mol/L×(106 μmol/1 mol)=μmol/L\text{mol/L} \times (10^6\text{ }\mu\text{mol} / 1\text{ mol}) = \mu\text{mol/L}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the molarity in moles per liter: C=4.00×10−5 mol/LC = 4.00 \times 10^{-5}\text{ mol/L}.

  2. Apply the conversion factor between moles and micromoles: 1 mol=106 μmol1\text{ mol} = 10^6\text{ }\mu\text{mol}.

  3. Multiply: C=4.00×10−5 mol/L×106 μmol/mol=40.0 μmol/LC = 4.00 \times 10^{-5}\text{ mol/L} \times 10^6\text{ }\mu\text{mol/mol} = 40.0\text{ }\mu\text{mol/L}.

Final answer

(a) M=2.20×103 g/molM = 2.20 \times 10^3\text{ g/mol}; (b) C=40.0 μmol/LC = 40.0\text{ }\mu\text{mol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review metric prefix relationships: milli (10−310^{-3}), micro (10−610^{-6}), and nano (10−910^{-9}).

  • Set up dimensional analysis ratios explicitly so unit cancellation verifies your power of 10.

Lock it in

Similar question

01

A solution contains dissolved poly(vinyl alcohol) (repeat unit −CHX2CH(OH)X−\ce{-CH2CH(OH)-}, M0=44.05 g/molM_0 = 44.05\text{ g/mol}) with a degree of polymerization n=100.0n = 100.0. If the mass concentration of the polymer is 0.220 g/L0.220\text{ g/L}, calculate the molar concentration of macromolecules in μmol/L\mu\text{mol/L}.

Answer

50.0 μmol/L50.0\text{ }\mu\text{mol/L}. Total chain molar mass M=100.0×44.05 g/mol=4405 g/molM = 100.0 \times 44.05\text{ g/mol} = 4405\text{ g/mol}. Molar concentration C=0.220 g/L4405 g/mol≈4.994×10−5 mol/L=50.0 μmol/LC = \frac{0.220\text{ g/L}}{4405\text{ g/mol}} \approx 4.994 \times 10^{-5}\text{ mol/L} = 50.0\text{ }\mu\text{mol/L}.

02

An analytical assay reports that a wastewater sample has a polystyrene (repeat unit M0=104.15 g/molM_0 = 104.15\text{ g/mol}, n=250n = 250) concentration of 12.0 μmol/L12.0\text{ }\mu\text{mol/L} of macromolecules. What is the total polymer mass concentration in mg/L\text{mg/L} (ppm)?

Answer

312 mg/L312\text{ mg/L} (312 ppm312\text{ ppm}). Polymer molar mass M=250×104.15 g/mol=26037.5 g/molM = 250 \times 104.15\text{ g/mol} = 26037.5\text{ g/mol}. Mass concentration ρ=C⋅M=(1.20×10−5 mol/L)×26037.5 g/mol≈0.312 g/L=312 mg/L\rho = C \cdot M = (1.20 \times 10^{-5}\text{ mol/L}) \times 26037.5\text{ g/mol} \approx 0.312\text{ g/L} = 312\text{ mg/L}.

03

A 500.0 mL500.0\text{ mL} aqueous solution contains 52.0 mg52.0\text{ mg} of polyacrylamide (repeat unit formula −CHX2CH(CONHX2)X−\ce{-CH2CH(CONH2)-}, M0=71.08 g/molM_0 = 71.08\text{ g/mol}). If the molar concentration of macromolecules is measured to be 1.83 μmol/L1.83\text{ }\mu\text{mol/L}, determine the degree of polymerization (nn) of the polyacrylamide.

Answer

n≈400n \approx 400. Mass concentration ρ=0.0520 g0.5000 L=0.104 g/L\rho = \frac{0.0520\text{ g}}{0.5000\text{ L}} = 0.104\text{ g/L}. Polymer chain molar mass M=ρC=0.104 g/L1.83×10−6 mol/L≈56831 g/molM = \frac{\rho}{C} = \frac{0.104\text{ g/L}}{1.83 \times 10^{-6}\text{ mol/L}} \approx 56831\text{ g/mol}. Degree of polymerization n=MM0=5683171.08≈400n = \frac{M}{M_0} = \frac{56831}{71.08} \approx 400.

Loading workspace…