Resources

Write the correct chemical formula for the ionic compound iron(III) sulfate, derived from the iron(III) transition metal cation and the polyatomic sulfate anion.

Answer and steps

Final answer

Fe2(SO4)3\text{Fe}_2(\text{SO}_4)_3

Steps

01

Identify the constituent ions and their charges

To determine the correct chemical formula for iron(III) sulfate, follow these systematic steps:

  • Cation (positive ion): The Roman numeral (III)(\text{III}) specifies the oxidation state (charge) of the transition metal ion. Thus, iron(III) is FeX3+\ce{Fe^3+}.
  • Anion (negative ion): The sulfate ion is a standard polyatomic ion with the formula and charge of SOX4X2−\ce{SO4^2-}.

02

Balance the positive and negative charges

Ionic compounds must be electrically neutral; the sum of the positive charges must equal the sum of the negative charges:

  1. Find the least common multiple (LCM\text{LCM}) of the magnitudes of the charges, 33 and 22: LCM(3,2)=6\text{LCM}(3, 2) = 6
  2. Calculate the number of each ion needed to achieve a total charge magnitude of 66:

    • Number of FeX3+\ce{Fe^3+} ions: 63=2  ⟹  2×(+3)=+6\frac{6}{3} = 2 \implies 2 \times (+3) = +6
    • Number of SOX4X2−\ce{SO4^2-} ions: 62=3  ⟹  3×(−2)=−6\frac{6}{2} = 3 \implies 3 \times (-2) = -6
  3. Check net charge: (+6)+(−6)=0(+6) + (-6) = 0

Alternatively, using the criss-cross method, the magnitude of the charge on the iron ion (33) becomes the subscript for the sulfate ion, and the magnitude of the charge on the sulfate ion (22) becomes the subscript for the iron ion: Fe3+SOX42−  ⟹  Fe2(SOX4)3\ce{Fe}^{\mathbf{3+}} \quad \ce{SO_4}^{\mathbf{2-}} \implies \ce{Fe}_{\mathbf{2}}(\ce{SO4})_{\mathbf{3}}


03

Write the final formula with proper notation

  • Place the cation first, followed by the anion.
  • Since sulfate (SOX4X2−\ce{SO4^2-}) is a polyatomic ion and requires a subscript greater than 11, enclose the entire polyatomic group in parentheses before writing the subscript: (SOX4)3(\ce{SO4})_3.
  • Combining these gives FeX2(SOX4)X3\ce{Fe2(SO4)3}.

Common Pitfall: Never distribute the subscript into the polyatomic formula or omit the parentheses (e.g., writing FeX2SOX43\ce{Fe2SO43} or FeX2SX3OX12\ce{Fe2S3O12}), as parentheses are necessary to indicate that three complete sulfate groups are present.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits parentheses around the polyatomic sulfate ion when multiplying its subscript, resulting in forty-three oxygen atoms instead of three sulfate units.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fe3+, SO42−\text{Fe}^{3+},\ \text{SO}_4^{2-}

  2. Step 2

    2(+3)+3(−2)=02(+3) + 3(-2) = 0

  3. Step 3

    Fe2SO43\text{Fe}_2\text{SO}_{43}

    Correct

    Fe2(SO4)3\text{Fe}_2(\text{SO}_4)_3

    When a formula requires multiple units of a polyatomic ion, you must enclose the entire polyatomic ion in parentheses before appending the subscript.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that iron(III) carries a +3+3 charge and sulfate carries a −2-2 charge.

You set up an accurate charge-neutrality equation to find the correct ratio of two cations to three anions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Parentheses for Polyatomic Ions

You placed the multiplier subscript 33 directly after the subscript 44 of oxygen, creating SO43\text{SO}_{43} rather than treating the sulfate group as a single enclosed unit.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You forgot the convention that polyatomic ions require parentheses whenever their subscript is greater than 11.

REASONING PATH
Your ACEpath teacher’s suggested approach
Parentheses Rule for Polyatomic Ions
  • A polyatomic ion must be enclosed in parentheses whenever a subscript of 22 or greater is applied to it (e.g., (SO4)3(\text{SO}_4)_3).

  • Before adding a subscript to any polyatomic ion, check if that subscript is greater than 11. If it is, enclose the entire ion formula in parentheses first.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Keep the polyatomic unit intact by wrapping it in parentheses: (SO4)(\text{SO}_4).

  2. Attach the subscript 33 outside the parentheses to denote three sulfate units: (SO4)3(\text{SO}_4)_3.

  3. Combine with the cation to write the complete neutral formula.

Final answer

Fe2(SO4)3\text{Fe}_2(\text{SO}_4)_3

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the chemical formulas of common polyatomic ions such as sulfate (SO42−\text{SO}_4^{2-}), nitrate (NO3−\text{NO}_3^-), and hydroxide (OH−\text{OH}^-).

  • Practice writing formulas for ionic compounds that contain polyatomic ions with subscripts greater than 11.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the Roman numeral III as the subscript for iron rather than its oxidation state or ionic charge.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Iron(III) has 3 Fe atoms: Fe3\text{Iron(III) has 3 Fe atoms: } \text{Fe}_3

    Correct

    Iron(III) is Fe3+\text{Iron(III) is } \text{Fe}^{3+}

    The Roman numeral (III)(\text{III}) denotes the oxidation state (ionic charge) of the metal cation, not the count of iron atoms or its subscript.

  2. Step 2

    Sulfate is SO42−\text{Sulfate is } \text{SO}_4^{2-}

  3. Step 3

    Fe3SO4\text{Fe}_3\text{SO}_4

    Correct

    Fe2(SO4)3\text{Fe}_2(\text{SO}_4)_3

    Because iron was treated as three neutral atoms rather than as the cation Fe3+\text{Fe}^{3+}, the formula did not balance positive and negative charges to achieve an electrically neutral compound.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the sulfate anion as SO42−\text{SO}_4^{2-} with its proper formula and −2-2 charge.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Roman numeral interpreted as atom subscript

You assigned the Roman numeral III as a subscript on iron rather than interpreting it as the +3+3 ionic charge of Fe3+\text{Fe}^{3+}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing transition metal Stock system nomenclature (where Roman numerals designate cation charge) with stoichiometric prefixes or subscripts that count atoms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Roman numerals denote charge, not quantity
  • In an ionic compound name, the Roman numeral in parentheses specifies the positive charge of the preceding transition metal cation.

  • Always write the Roman numeral as a superscript charge on the single metal symbol first (e.g., iron(III) →Fe3+\rightarrow \text{Fe}^{3+}).

Balance charges to achieve electrical neutrality
  • The total positive charge must equal the total negative charge so the net charge is zero.

  • Find the least common multiple of the charges (+3+3 and −2-2 have an LCM of 66), giving two Fe3+\text{Fe}^{3+} and three SO42−\text{SO}_4^{2-} ions: Fe2(SO4)3\text{Fe}_2(\text{SO}_4)_3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the cation: iron(III) corresponds to the ion Fe3+\text{Fe}^{3+}.

  2. Identify the anion: sulfate is the polyatomic ion SO42−\text{SO}_4^{2-}.

  3. Determine the ion ratio needed for a net charge of zero: 2(+3)+3(−2)=02(+3) + 3(-2) = 0, requiring 22 iron ions and 33 sulfate ions.

  4. Write the formula using parentheses around the polyatomic group when its subscript is greater than 11: Fe2(SO4)3\text{Fe}_2(\text{SO}_4)_3.

Final answer

Fe2(SO4)3\text{Fe}_2(\text{SO}_4)_3

NEXT STEPS
Final Takeaways from Your Teacher
  • Before combining ions into a formula, always write out both constituent ions separately with their charges explicitly shown as superscripts.

  • Practice using the least common multiple method or criss-cross method to balance unequal cation and anion charges.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the sulfate anion with the sulfite anion, using SO₃²⁻ instead of SO₄²⁻.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fe3+ and SO32−\text{Fe}^{3+}\text{ and }\text{SO}_3^{2-}

    Correct

    Fe3+ and SO42−\text{Fe}^{3+}\text{ and }\text{SO}_4^{2-}

    You correctly determined that iron(III) carries a +3+3 charge, but sulfate is SO42−\text{SO}_4^{2-}. The formula SO32−\text{SO}_3^{2-} represents the sulfite ion.

  2. Step 2

    2(+3)+3(−2)=02(+3) + 3(-2) = 0

  3. Step 3

    Fe2(SO3)3\text{Fe}_2(\text{SO}_3)_3

    Correct

    Fe2(SO4)3\text{Fe}_2(\text{SO}_4)_3

    Your formula assembly and use of parentheses followed your ratio correctly, but the resulting formula is iron(III) sulfite because of the ion error in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the iron(III) cation as Fe3+\text{Fe}^{3+}.

You correctly balanced the +3+3 and −2-2 charges using a 2:32:3 ratio.

You properly enclosed the polyatomic ion in parentheses with a subscript of 33.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Polyatomic Ion Identification

You substituted the sulfite anion (SO32−\text{SO}_3^{2-}) for the sulfate anion (SO42−\text{SO}_4^{2-}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the '-ate' and '-ite' oxyanion naming rules: '-ate' anions have one more oxygen atom than '-ite' anions (sulfate is SO42−\text{SO}_4^{2-}, whereas sulfite is SO32−\text{SO}_3^{2-}), while both share the same −2-2 charge.

REASONING PATH
Your ACEpath teacher’s suggested approach
Oxyanion Suffix Rule
  • For a given nonmetal, the '-ate' ion always has one more oxygen atom than the '-ite' ion, while maintaining the same net charge.

  • Associate sulfate with SO42−\text{SO}_4^{2-} (4 oxygens) and sulfite with SO32−\text{SO}_3^{2-} (3 oxygens).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the correct sulfate polyatomic ion: SO42−\text{SO}_4^{2-}.

  2. Combine two Fe3+\text{Fe}^{3+} ions and three SO42−\text{SO}_4^{2-} ions to achieve a net charge of zero: 2(+3)+3(−2)=02(+3) + 3(-2) = 0.

  3. Enclose the polyatomic sulfate ion in parentheses with subscript 33: Fe2(SO4)3\text{Fe}_2(\text{SO}_4)_3.

Final answer

Fe2(SO4)3\text{Fe}_2(\text{SO}_4)_3

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the standard formulas and charges of common polyatomic oxyanions, focusing on '-ate' vs. '-ite' pairs.

  • Double-check that the number of oxygen atoms matches the name suffix before balancing the compound's charges.

Lock it in

Similar question

01

Write the chemical formula for calcium phosphate, formed from the calcium ion Ca2+\text{Ca}^{2+} and the phosphate polyatomic ion PO43−\text{PO}_4^{3-}.

Answer

Ca3(PO4)2\text{Ca}_3(\text{PO}_4)_2

Key steps: Balance charges with 3(+2)+2(−3)=03(+2) + 2(-3) = 0. Enclose the polyatomic phosphate ion in parentheses before appending the subscript 22.

02

Write the chemical formula for ammonium carbonate, formed from the ammonium cation NH4+\text{NH}_4^+ and the carbonate anion CO32−\text{CO}_3^{2-}.

Answer

(NH4)2CO3(\text{NH}_4)_2\text{CO}_3

Key steps: Two NH4+\text{NH}_4^+ ions are required to balance one CO32−\text{CO}_3^{2-} ion. Enclose the polyatomic cation NH4+\text{NH}_4^+ in parentheses with subscript 22; the carbonate ion does not need parentheses because its subscript is 11.

03

Write the chemical formula for tin(IV) nitrate, formed from the transition metal cation Sn4+\text{Sn}^{4+} and the nitrate polyatomic ion NO3−\text{NO}_3^-.

Answer

Sn(NO3)4\text{Sn}(\text{NO}_3)_4

Key steps: The Roman numeral (IV) indicates Sn4+\text{Sn}^{4+}. Four NO3−\text{NO}_3^- anions balance the +4+4 charge: 1(+4)+4(−1)=01(+4) + 4(-1) = 0. Enclose nitrate in parentheses and add the subscript 44.

Loading workspace…