Resources
A municipal wastewater sample contains sulfate contamination measured at of (molar mass ). A technician treats a aliquot of this wastewater with excess aqueous barium chloride, . Write the balanced net ionic equation for the precipitation reaction, and calculate the mass of dried (molar mass ) recovered from the aliquot.
Answer and steps
Final answer
Net ionic equation: ; Mass of precipitate:
Steps
Write the Balanced Net Ionic Equation
When aqueous barium chloride () is added to a solution containing sulfate ions (), the soluble salt dissociates completely into barium ions () and chloride ions ():
Barium ions react with dissolved sulfate ions to form an insoluble white precipitate of barium sulfate (), while chloride ions remain dissolved as spectator ions.
Eliminating spectator ions yields the balanced net ionic equation:
Determine the Mass and Moles of Sulfate in the Aliquot
Convert the aliquot volume from milliliters to liters:
Calculate the mass of dissolved sulfate ions () present in this volume:
Convert this mass to moles using the molar mass of ():
Calculate the Mass of Precipitate
From the net ionic equation, the stoichiometric ratio between and is . Because is in excess, the sulfate ion is the limiting reactant:
Multiply by the molar mass of () to find the recovered mass:
Typical errors
01 The student forgets to account for the aliquot volume and calculates the precipitate mass using 1.00 L of wastewater instead of 250.0 mL, resulting in a mass of 1.166 g.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You treated the concentration () as the total mass of sulfate. Because only a () aliquot was analyzed, you must multiply the concentration by the aliquot volume: .
- Step 3Correct
Your conversion from mass to moles and your application of the stoichiometric ratio were mathematically correct, but they inherited the incorrect mass from the previous step.
- Step 4Correct
Your multiplication by the molar mass of was performed correctly, but the result was four times too large due to the unscaled initial mass.
WHAT YOU DID WELL
Compliments from Your TeacherYou wrote the correct balanced net ionic equation for the precipitation of barium sulfate.
You correctly converted milligrams to grams and used molar mass values accurately.
You correctly used the mole ratio between dissolved sulfate and solid barium sulfate precipitate.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated concentration () directly with total solute mass () without multiplying by the sample volume.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing an intensive property (mass concentration, ) with an extensive property (total mass, ), which led to analyzing of solution instead of the specified aliquot.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Units and Dimensions
Always verify that concentration units () are multiplied by volume in liters () to yield mass ().
- Account for the Specific Aliquot
Analytical tests are typically performed on a measured portion (aliquot), not the entire bulk solution.
Highlight the volume of the tested sample in the problem prompt and multiply by it before converting to moles.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the aliquot volume: .
Multiply concentration by aliquot volume: .
Convert mass of sulfate to moles: .
Apply the mole ratio to find precipitate moles: .
Calculate final precipitate mass: .
Net ionic equation: ; Mass of precipitate:
02 The student writes a full molecular equation rather than the requested net ionic equation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You wrote a complete molecular equation by assuming sodium was the spectator cation, rather than writing the net ionic equation that includes only the participating ions and the insoluble product.
- Step 2
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the dissolved mass of sulfate ions from concentration and volume.
You converted mass to moles using the correct molar mass.
You recognized the stoichiometric relationship between sulfate ions and barium sulfate precipitate.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou defaulted to writing a conventional double-displacement molecular equation and introduced an unstated spectator ion (), rather than dissociating strong electrolytes and canceling spectators to write the net ionic equation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define Net Ionic Equation
A net ionic equation shows only the specific chemical species that directly participate in bond formation or state change, excluding all spectator ions.
Identify the solid precipitate formed (), write it on the product side, and write its constituent aqueous ions ( and ) on the reactant side.
- Avoid Inventing Unstated Counter-Ions
When a solution problem specifies an isolated ion contamination (like ), do not invent molecular salts like unless explicitly instructed.
Work directly with the ionic symbol and charge provided in the prompt.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the soluble reactant delivering barium: .
Combine the reactive ions to form the insoluble precipitate: .
Verify that spectator ions () are omitted and both mass and charge balance.
Net ionic equation: ; Mass of precipitate:
03 The student fails to convert the sulfate concentration from milligrams to grams, leading to a calculated mass that is 1000 times too large (291.6 g).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Multiplying a concentration in by a volume in yields a mass in milligrams (), not grams (). You need to divide by to convert to grams before using molar mass.
- Step 3Correct
Your formula for moles is correct, but your calculation carries forward the incorrect mass value from Step 2.
- Step 4Correct
Your mole ratio between and is correct, but the mole quantity carries forward the prior unit error.
- Step 5Correct
You correctly multiplied moles by the molar mass of barium sulfate, but the numerical answer is times too large due to the earlier unit error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly wrote the balanced net ionic equation with accurate charges and state symbols.
You converted the aliquot volume from milliliters to liters correctly ().
You applied the correct stoichiometric mole ratio between sulfate and barium sulfate.
You correctly set up the molar mass relationships to convert between mass and moles.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou replaced the unit with without dividing by .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked unit tracking during the concentration-to-mass conversion: yields , which must be converted to before applying molar mass in .
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Cancellation Check
Explicitly write and cancel units at each step: .
- Molar Mass Compatibility
Molar mass is expressed in , so sample mass must be in grams ().
Divide mass in by before computing moles: .
CORRECTED PATH
ACEpath Teacher's DemonstrationNet ionic equation: ; Mass of precipitate:
Lock it in
How do you calculate the mass of solute present when given a mass concentration in ?
Multiply mass concentration by the sample volume in liters: .
Similar question
A water sample has a chloride ion concentration of (molar mass ). Excess silver nitrate, , is added. Write the net ionic equation and calculate the mass of dried precipitate formed (molar mass ).
Answer
Net ionic equation: . Key steps: . Moles of . Precipitate mass: .
A industrial effluent containing of phosphate ions, (molar mass ), is treated with excess aqueous calcium chloride, . Write the net ionic equation and determine the mass of calcium phosphate, (molar mass ), precipitated.
Answer
Net ionic equation: . Key steps: . Moles of . Stoichiometry gives . Precipitate mass: .
A reservoir sample has a lead contamination of of (molar mass ). A chemist extracts a aliquot from this sample and adds excess sodium sulfate, . Write the net ionic equation and calculate the theoretical mass of (molar mass ) formed from this aliquot.
Answer
Net ionic equation: . Key steps: The concentration in the aliquot remains . Mass of in aliquot . Moles of . Precipitate mass: ().