Resources

A rigid 5.00 L5.00\text{ L} cylinder contains a mixture of noble gases at 298 K298\text{ K}. The mixture consists of 0.240 mol0.240\text{ mol} of helium (He\text{He}), 0.150 mol0.150\text{ mol} of neon (Ne\text{Ne}), and 0.060 mol0.060\text{ mol} of argon (Ar\text{Ar}). Calculate the total pressure in the cylinder, PtotalP_{\text{total}}, and the partial pressure of neon, PNeP_{\text{Ne}}, in atmospheres (atm\text{atm}). Assume ideal gas behavior (R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K})).

Answer and steps

Final answer

Ptotal=2.20 atmP_{\text{total}} = 2.20\text{ atm}, PNe=0.733 atmP_{\text{Ne}} = 0.733\text{ atm}

Steps

01

Find the total number of moles of gas

According to Dalton's law of partial pressures and the ideal gas law, each gas behaves independently in the mixture. The total number of moles of gas, ntotaln_{\text{total}}, is the sum of the moles of all individual components:

ntotal=nHe+nNe+nArn_{\text{total}} = n_{\ce{He}} + n_{\ce{Ne}} + n_{\ce{Ar}}

Substitute the given quantities:

ntotal=0.240 mol+0.150 mol+0.060 mol=0.450 moln_{\text{total}} = 0.240\text{ mol} + 0.150\text{ mol} + 0.060\text{ mol} = 0.450\text{ mol}

02

Calculate the total pressure (PtotalP_{\text{total}})

Apply the ideal gas law to the entire gas mixture:

PtotalV=ntotalRT  ⟹  Ptotal=ntotalRTVP_{\text{total}} V = n_{\text{total}} R T \implies P_{\text{total}} = \frac{n_{\text{total}} R T}{V}

Given:

  • ntotal=0.450 moln_{\text{total}} = 0.450\text{ mol}
  • R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K})
  • T=298 KT = 298\text{ K}
  • V=5.00 LV = 5.00\text{ L}

Substitute these values into the formula:

Ptotal=0.450 mol⋅0.08206L⋅atmmol⋅K⋅298 K5.00 L=11.004 L⋅atm5.00 L≈2.20 atmP_{\text{total}} = \frac{0.450\text{ mol} \cdot 0.08206\frac{\text{L}\cdot\text{atm}}{\text{mol}\cdot\text{K}} \cdot 298\text{ K}}{5.00\text{ L}} = \frac{11.004\text{ L}\cdot\text{atm}}{5.00\text{ L}} \approx 2.20\text{ atm}

03

Calculate the partial pressure of neon (PNeP_{\ce{Ne}})

The partial pressure of any component in an ideal gas mixture is proportional to its mole fraction (XiX_i):

PNe=XNe⋅Ptotal=(nNentotal)PtotalP_{\ce{Ne}} = X_{\ce{Ne}} \cdot P_{\text{total}} = \left(\frac{n_{\ce{Ne}}}{n_{\text{total}}}\right) P_{\text{total}}

Calculate the mole fraction of neon:

XNe=0.150 mol0.450 mol=13X_{\ce{Ne}} = \frac{0.150\text{ mol}}{0.450\text{ mol}} = \frac{1}{3}

Now calculate PNeP_{\ce{Ne}}:

PNe=13⋅2.2008 atm≈0.733 atmP_{\ce{Ne}} = \frac{1}{3} \cdot 2.2008\text{ atm} \approx 0.733\text{ atm}

(Alternative check): You can also compute PNeP_{\ce{Ne}} directly using the ideal gas equation for neon alone: PNe=nNeRTV=0.150 mol⋅0.08206L⋅atmmol⋅K⋅298 K5.00 L≈0.733 atmP_{\ce{Ne}} = \frac{n_{\ce{Ne}} R T}{V} = \frac{0.150\text{ mol} \cdot 0.08206\frac{\text{L}\cdot\text{atm}}{\text{mol}\cdot\text{K}} \cdot 298\text{ K}}{5.00\text{ L}} \approx 0.733\text{ atm}

Both methods yield identical results.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies total pressure as depending only on the gas with the largest molar amount (helium) rather than summing all component moles, underestimating P_total as 1.17 atm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=0.240 mol  ⟹  Ptotal=0.240⋅0.08206⋅2985.00=1.17 atmn = 0.240\text{ mol} \implies P_{\text{total}} = \frac{0.240 \cdot 0.08206 \cdot 298}{5.00} = 1.17\text{ atm}

    Correct

    ntotal=0.240+0.150+0.060=0.450 mol  ⟹  Ptotal=0.450⋅0.08206⋅2985.00≈2.20 atmn_{\text{total}} = 0.240 + 0.150 + 0.060 = 0.450\text{ mol} \implies P_{\text{total}} = \frac{0.450 \cdot 0.08206 \cdot 298}{5.00} \approx 2.20\text{ atm}

    You used only the moles of helium (0.240 mol0.240\text{ mol}) to find the total pressure. In a gas mixture, every gas component exerts pressure, so you need to sum the moles of all gases (ntotal=nHe+nNe+nArn_{\text{total}} = n_{\ce{He}} + n_{\ce{Ne}} + n_{\ce{Ar}}) before applying the ideal gas law.

  2. Step 2

    PNe=(nNentotal)Ptotal  ⟹  PNe=0.150⋅0.08206⋅2985.00=0.734 atmP_{\ce{Ne}} = \left(\frac{n_{\ce{Ne}}}{n_{\text{total}}}\right) P_{\text{total}} \implies P_{\ce{Ne}} = \frac{0.150 \cdot 0.08206 \cdot 298}{5.00} = 0.734\text{ atm}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the ideal gas equation with the appropriate temperature, volume, and gas constant.

You successfully calculated the correct partial pressure for neon.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of mixture components when calculating total pressure

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the total quantity of gas as equal to the single largest component (0.240 mol0.240\text{ mol} of helium) instead of applying Dalton's law to sum all component moles (ntotal=nHe+nNe+nArn_{\text{total}} = n_{\ce{He}} + n_{\ce{Ne}} + n_{\ce{Ar}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Summing Moles in a Mixture
  • For an ideal gas mixture, ntotal=∑ni=n1+n2+⋯+nkn_{\text{total}} = \sum n_i = n_1 + n_2 + \dots + n_k.

  • Always find ntotaln_{\text{total}} by adding the moles of every gas present before solving for total pressure.

Dalton's Law of Partial Pressures
  • Ptotal=P1+P2+⋯+Pk=ntotalRTVP_{\text{total}} = P_1 + P_2 + \dots + P_k = \frac{n_{\text{total}} R T}{V}.

  • Verify that your total pressure equals the sum of the partial pressures of all individual gases.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the total moles: ntotal=0.240 mol+0.150 mol+0.060 mol=0.450 moln_{\text{total}} = 0.240\text{ mol} + 0.150\text{ mol} + 0.060\text{ mol} = 0.450\text{ mol}.

  2. Calculate total pressure: Ptotal=0.450 mol⋅0.08206L⋅atmmol⋅K⋅298 K5.00 L≈2.20 atmP_{\text{total}} = \frac{0.450\text{ mol} \cdot 0.08206\frac{\text{L}\cdot\text{atm}}{\text{mol}\cdot\text{K}} \cdot 298\text{ K}}{5.00\text{ L}} \approx 2.20\text{ atm}.

Final answer

Ptotal=2.20 atmP_{\text{total}} = 2.20\text{ atm}, PNe=0.733 atmP_{\ce{Ne}} = 0.733\text{ atm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before applying PV=nRTPV = nRT to a mixture, explicitly write out the sum of all individual moles to find ntotaln_{\text{total}}.

  • Perform a sanity check: the total pressure must always be strictly greater than the partial pressure of any single component.

OverviewACEpath Teacher's Diagnosis

02 The student confuses partial pressure with mole fraction and forgets to multiply by total pressure, concluding that P_Ne equals 0.333 atm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ntotal=0.240+0.150+0.060=0.450 moln_{\text{total}} = 0.240 + 0.150 + 0.060 = 0.450\text{ mol}

  2. Step 2

    Ptotal=(0.450⋅0.08206⋅298)/5.00  ⟹  Ptotal=2.20 atmP_{\text{total}} = (0.450 \cdot 0.08206 \cdot 298) / 5.00 \implies P_{\text{total}} = 2.20\text{ atm}

  3. Step 3

    PNe=0.150/0.450  ⟹  PNe=0.333 atmP_{\text{Ne}} = 0.150 / 0.450 \implies P_{\text{Ne}} = 0.333\text{ atm}

    Correct

    PNe=XNe⋅Ptotal=(0.150 mol0.450 mol)⋅2.20 atm≈0.733 atmP_{\text{Ne}} = X_{\text{Ne}} \cdot P_{\text{total}} = \left(\frac{0.150\text{ mol}}{0.450\text{ mol}}\right) \cdot 2.20\text{ atm} \approx 0.733\text{ atm}

    The ratio 0.1500.450=0.333\frac{0.150}{0.450} = 0.333 represents the dimensionless mole fraction (XNeX_{\text{Ne}}), not the pressure. According to Dalton's law, you must multiply this mole fraction by PtotalP_{\text{total}} to obtain the partial pressure.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly summed the component moles to find the total moles of gas in the cylinder.

You correctly substituted the values into the ideal gas equation to compute the total pressure of 2.20 atm2.20\text{ atm}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating mole fraction to partial pressure

You stopped after dividing nNen_{\text{Ne}} by ntotaln_{\text{total}} and labeled the resulting fraction directly as pressure in atmospheres.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the dimensionless mole fraction (Xi=nintotalX_i = \frac{n_i}{n_{\text{total}}}) with partial pressure (Pi=Xi⋅PtotalP_i = X_i \cdot P_{\text{total}}). A mole fraction represents a proportional share of the gas mixture, so it must scale with the total pressure to yield a pressure value.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check physical units
  • Mole fraction XiX_i is a dimensionless ratio; partial pressure PiP_i must have pressure units such as atm\text{atm} or kPa\text{kPa}.

  • Whenever you compute a mole ratio, verify that you multiply by PtotalP_{\text{total}} before attaching pressure units.

Alternative check via Ideal Gas Law
  • Each ideal gas exerts pressure as if it occupied the entire container volume alone: Pi=niRTVP_i = \frac{n_i R T}{V}.

  • Check your partial pressure calculation by solving the ideal gas law directly for that component.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State Dalton's law relating partial pressure to mole fraction: PNe=XNe⋅PtotalP_{\text{Ne}} = X_{\text{Ne}} \cdot P_{\text{total}}.

  2. Substitute the mole fraction and the total pressure: PNe=(0.150 mol0.450 mol)⋅2.2008 atm=13⋅2.2008 atmP_{\text{Ne}} = \left(\frac{0.150\text{ mol}}{0.450\text{ mol}}\right) \cdot 2.2008\text{ atm} = \frac{1}{3} \cdot 2.2008\text{ atm}.

  3. Evaluate the product to three significant figures: PNe≈0.733 atmP_{\text{Ne}} \approx 0.733\text{ atm}.

Final answer

Ptotal=2.20 atmP_{\text{total}} = 2.20\text{ atm}, PNe=0.733 atmP_{\text{Ne}} = 0.733\text{ atm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between mole fraction (XiX_i) and partial pressure (PiP_i).

  • Practice using both Dalton's formula (Pi=XiPtotalP_i = X_i P_{\text{total}}) and the direct ideal gas equation (Pi=niRTVP_i = \frac{n_i R T}{V}) to verify consistency.

OverviewACEpath Teacher's Diagnosis

03 The student divides the total volume equally among the three gases (V = 5.00 / 3 L = 1.67 L) when calculating the partial pressure of neon instead of using the entire container volume, giving P_Ne = 2.20 atm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ntotal=0.240+0.150+0.060=0.450 moln_{\text{total}} = 0.240 + 0.150 + 0.060 = 0.450\text{ mol}

  2. Step 2

    Ptotal=(0.450⋅0.08206⋅298)/5.00  ⟹  Ptotal=2.20 atmP_{\text{total}} = (0.450 \cdot 0.08206 \cdot 298) / 5.00 \implies P_{\text{total}} = 2.20\text{ atm}

  3. Step 3

    VNe=5.00/3=1.67 LV_{\text{Ne}} = 5.00 / 3 = 1.67\text{ L}

    Correct

    VNe=V=5.00 LV_{\text{Ne}} = V = 5.00\text{ L} (or use mole fraction XNe=0.1500.450=13X_{\text{Ne}} = \frac{0.150}{0.450} = \frac{1}{3})

    In any ideal gas mixture, every gas expands to fill the entire container volume independently. Neon occupies the full 5.00 L5.00\text{ L}, not one-third of the volume.

  4. Step 4

    PNe=(0.150⋅0.08206⋅298)/1.67  ⟹  PNe=2.20 atmP_{\text{Ne}} = (0.150 \cdot 0.08206 \cdot 298) / 1.67 \implies P_{\text{Ne}} = 2.20\text{ atm}

    Correct

    PNe=nNeRTV=0.150⋅0.08206⋅2985.00≈0.733 atmP_{\text{Ne}} = \frac{n_{\text{Ne}} R T}{V} = \frac{0.150 \cdot 0.08206 \cdot 298}{5.00} \approx 0.733\text{ atm}

    Because you substituted the divided volume of 1.67 L1.67\text{ L}, your calculated partial pressure matched the total pressure rather than reflecting neon's individual share of 0.733 atm0.733\text{ atm}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total moles of gas by summing the individual components.

You correctly applied the ideal gas law to find the total pressure of the mixture.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Partitioning gas volume in a mixture

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the gas mixture like immiscible liquids or solid blocks by partitioning the container volume equally among the three gases. Under Dalton's law and kinetic molecular theory, gas particles have negligible volume and expand freely throughout the entire container, so each component gas independently occupies the full volume V=5.00 LV = 5.00\text{ L}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Volume of a Gas in a Mixture
  • Every gas in an ideal mixture occupies the entire volume of the container (Vcomponent=VtotalV_{\text{component}} = V_{\text{total}}).

  • Always use the full container volume VV when applying Pi=niRTVP_i = \frac{n_i R T}{V} to find a partial pressure.

Reasonableness Check on Partial Pressure
  • By Dalton's law, Ptotal=∑PiP_{\text{total}} = \sum P_i. Therefore, for any non-pure mixture, Pi<PtotalP_i < P_{\text{total}}.

  • If your calculated partial pressure equals or exceeds the total pressure of a mixture, check whether you adjusted the volume instead of keeping it constant.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that neon expands to occupy the entire 5.00 L5.00\text{ L} volume of the cylinder.

  2. Method 1 (Ideal Gas Law): PNe=nNeRTV=0.150 mol×0.08206L⋅atmmol⋅K×298 K5.00 L=0.733 atmP_{\text{Ne}} = \frac{n_{\text{Ne}} R T}{V} = \frac{0.150\text{ mol} \times 0.08206\frac{\text{L}\cdot\text{atm}}{\text{mol}\cdot\text{K}} \times 298\text{ K}}{5.00\text{ L}} = 0.733\text{ atm}.

  3. Method 2 (Dalton's Law with mole fraction): XNe=0.150 mol0.450 mol=13X_{\text{Ne}} = \frac{0.150\text{ mol}}{0.450\text{ mol}} = \frac{1}{3}, so PNe=XNe⋅Ptotal=13×2.20 atm=0.733 atmP_{\text{Ne}} = X_{\text{Ne}} \cdot P_{\text{total}} = \frac{1}{3} \times 2.20\text{ atm} = 0.733\text{ atm}.

Final answer

Ptotal=2.20 atmP_{\text{total}} = 2.20\text{ atm}, PNe=0.733 atmP_{\text{Ne}} = 0.733\text{ atm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that in gas mixtures, gases share the same total volume (VV) and temperature (TT), but their pressures (PiP_i) add up to the total pressure.

  • Practice using the mole fraction formula Pi=Xi⋅PtotalP_i = X_i \cdot P_{\text{total}} as a quick, reliable alternative to avoid altering the container volume.

Lock it in

Similar question

01

A 2.00 L2.00\text{ L} flask at 300 K300\text{ K} contains 0.050 mol0.050\text{ mol} of OX2\ce{O2} and 0.150 mol0.150\text{ mol} of NX2\ce{N2}. Calculate the total pressure in the flask (R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K})).

Answer

Ptotal=2.46 atmP_{\text{total}} = 2.46\text{ atm}. Key steps: ntotal=0.050+0.150=0.200 moln_{\text{total}} = 0.050 + 0.150 = 0.200\text{ mol}; Ptotal=0.200⋅0.08206⋅3002.00=2.46 atmP_{\text{total}} = \frac{0.200 \cdot 0.08206 \cdot 300}{2.00} = 2.46\text{ atm}.

02

A mixture containing 0.400 mol CHX40.400\text{ mol}\ \ce{CH4}, 0.200 mol CX2HX60.200\text{ mol}\ \ce{C2H6}, and 0.400 mol CX3HX80.400\text{ mol}\ \ce{C3H8} is held in a 12.0 L12.0\text{ L} container at 350 K350\text{ K}. Calculate the total pressure and the partial pressure of ethane (CX2HX6\ce{C2H6}).

Answer

Ptotal=2.39 atmP_{\text{total}} = 2.39\text{ atm}, PCX2HX6=0.479 atmP_{\ce{C2H6}} = 0.479\text{ atm}. Key steps: ntotal=0.400+0.200+0.400=1.000 moln_{\text{total}} = 0.400 + 0.200 + 0.400 = 1.000\text{ mol}; Ptotal=1.000⋅0.08206⋅35012.0≈2.393 atmP_{\text{total}} = \frac{1.000 \cdot 0.08206 \cdot 350}{12.0} \approx 2.393\text{ atm}; XCX2HX6=0.2001.000=0.200X_{\ce{C2H6}} = \frac{0.200}{1.000} = 0.200; PCX2HX6=0.200⋅2.393≈0.479 atmP_{\ce{C2H6}} = 0.200 \cdot 2.393 \approx 0.479\text{ atm}.

03

A rigid vessel holds a mixture of He\ce{He} and Ar\ce{Ar}. The partial pressure of He\ce{He} is 1.80 atm1.80\text{ atm}, and the mole fraction of Ar\ce{Ar} is 0.2500.250. What is the total pressure in the vessel, and what is the partial pressure of Ar\ce{Ar}?

Answer

Ptotal=2.40 atmP_{\text{total}} = 2.40\text{ atm}, PAr=0.60 atmP_{\ce{Ar}} = 0.60\text{ atm}. Key steps: XHe=1−0.250=0.750X_{\ce{He}} = 1 - 0.250 = 0.750; Ptotal=PHeXHe=1.800.750=2.40 atmP_{\text{total}} = \frac{P_{\ce{He}}}{X_{\ce{He}}} = \frac{1.80}{0.750} = 2.40\text{ atm}; PAr=Ptotal−PHe=2.40−1.80=0.60 atmP_{\ce{Ar}} = P_{\text{total}} - P_{\ce{He}} = 2.40 - 1.80 = 0.60\text{ atm}.

Loading workspace…