Resources

A saturated solution of sparingly soluble lead(II) chloride (PbCl2\text{PbCl}_2, Ksp=1.70×10−5K_{sp} = 1.70 \times 10^{-5}) is prepared at 25 ∘C25\,^\circ\text{C}. If solid sodium chloride (NaCl\text{NaCl}) is introduced until the dissolved chloride ion concentration reaches [Cl−]=0.200 M[\text{Cl}^-] = 0.200\,\text{M} (assume negligible volume change), calculate: (a) the new equilibrium molar solubility of PbCl2\text{PbCl}_2 under this common-ion effect, and (b) whether the overall electrical conductivity of the solution increases, decreases, or remains identical relative to the original saturated PbCl2\text{PbCl}_2 solution.

Answer and steps

Final answer

(a) S′=4.25×10−4 MS' = 4.25 \times 10^{-4}\,\text{M}; (b) The electrical conductivity increases substantially. Under the common-ion effect, Ksp=[Pb2+][Cl−]2=S′(0.200)2=1.70×10−5K_{sp} = [\text{Pb}^{2+}][\text{Cl}^-]^2 = S'(0.200)^2 = 1.70 \times 10^{-5}, yielding S′=4.25×10−4 MS' = 4.25 \times 10^{-4}\,\text{M} (down from 1.62×10−2 M1.62 \times 10^{-2}\,\text{M}). However, the total ionic population increases drastically due to the addition of 0.200 M Na+0.200\,\text{M}\ \text{Na}^+ and 0.200 M Cl−0.200\,\text{M}\ \text{Cl}^-, thereby increasing total aqueous charge carriers and conductivity.

Steps

Part (a): Equilibrium Molar Solubility Under the Common-Ion Effect

  1. Dissolution Equilibrium and Solubility Product Expression
    The dissolution of sparingly soluble lead(II) chloride is represented by: PbClX2(s)⇌PbX2+(aq)+2 ClX−(aq)\ce{PbCl2(s) <=> Pb^{2+}(aq) + 2Cl^-(aq)} The solubility product constant expression is: Ksp=[PbX2+][ClX−]2K_{sp} = [\ce{Pb^{2+}}][\ce{Cl^-}]^2
  2. Relating Solubility to Ion Concentrations
    Let S′S' be the new molar solubility of PbClX2\ce{PbCl2} in the presence of added NaCl\ce{NaCl}. Each mole of dissolved PbClX2\ce{PbCl2} produces 1 mol1\text{ mol} of PbX2+\ce{Pb^{2+}}: [PbX2+]=S′[\ce{Pb^{2+}}] = S' The total equilibrium concentration of chloride is given as [ClX−]=0.200 M[\ce{Cl^-}] = 0.200\text{ M}.
  3. Calculating S′S'
    Substitute the values into the KspK_{sp} expression: 1.70×10−5=S′(0.200)21.70 \times 10^{-5} = S'(0.200)^2 1.70×10−5=S′(0.0400)1.70 \times 10^{-5} = S'(0.0400) S′=1.70×10−50.0400=4.25×10−4 MS' = \frac{1.70 \times 10^{-5}}{0.0400} = 4.25 \times 10^{-4}\text{ M}

    (Comparison: In pure water, Ksp=4S3K_{sp} = 4S^3, giving an initial solubility of S=1.70×10−543≈1.62×10−2 MS = \sqrt[3]{\frac{1.70 \times 10^{-5}}{4}} \approx 1.62 \times 10^{-2}\text{ M}. The presence of common ClX−\ce{Cl^-} ions shifts equilibrium to the left, decreasing the solubility by nearly two orders of magnitude).


Part (b): Change in Electrical Conductivity

  1. Determinants of Electrical Conductivity
    The electrical conductivity of an aqueous solution depends directly on the concentration and mobility of free ions (charge carriers) present in the solution.
  2. Comparing Ion Concentrations

    • Initial Saturated Solution:
      Only dissolved PbClX2\ce{PbCl2} provides ions: [PbX2+]≈0.0162 M,[ClX−]≈0.0325 M[\ce{Pb^{2+}}] \approx 0.0162\text{ M}, \quad [\ce{Cl^-}] \approx 0.0325\text{ M} Total ion concentration≈0.0162+0.0325=0.0487 M\text{Total ion concentration} \approx 0.0162 + 0.0325 = 0.0487\text{ M}
    • Solution After Adding NaCl\ce{NaCl}:
      NaCl\ce{NaCl} is a strong electrolyte that dissociates completely into NaX+\ce{Na^+} and ClX−\ce{Cl^-}. To establish [ClX−]=0.200 M[\ce{Cl^-}] = 0.200\text{ M}, approximately 0.200 M0.200\text{ M} of NaX+\ce{Na^+} ions are simultaneously introduced: [ClX−]=0.200 M,[NaX+]≈0.200 M,[PbX2+]=4.25×10−4 M[\ce{Cl^-}] = 0.200\text{ M}, \quad [\ce{Na^+}] \approx 0.200\text{ M}, \quad [\ce{Pb^{2+}}] = 4.25 \times 10^{-4}\text{ M} Total ion concentration≈0.200+0.200+0.000425≈0.400 M\text{Total ion concentration} \approx 0.200 + 0.200 + 0.000425 \approx 0.400\text{ M}
  3. Conclusion and Common Pitfall
    Because the total ion concentration increases by nearly an order of magnitude (from ≈0.05 M\approx 0.05\text{ M} to ≈0.40 M\approx 0.40\text{ M}), the electrical conductivity increases substantially.

    Pitfall: Do not assume that a decrease in PbClX2\ce{PbCl2} solubility implies a decrease in conductivity. Although some PbX2+\ce{Pb^{2+}} precipitates as PbClX2(s)\ce{PbCl2(s)}, the large amount of added NaX+\ce{Na^+} and ClX−\ce{Cl^-} far outweighs the loss of lead ions, dramatically increasing the total mobile charge carrier density.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the chloride ion concentration in the K_sp expression.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ksp=[Pb2+][Cl−]=1.70×10−5K_{sp} = [\text{Pb}^{2+}][\text{Cl}^-] = 1.70 \times 10^{-5}

    Correct

    Ksp=[Pb2+][Cl−]2=1.70×10−5K_{sp} = [\text{Pb}^{2+}][\text{Cl}^-]^2 = 1.70 \times 10^{-5}

    You omitted the power of 22 on [Cl−][\text{Cl}^-]. Because PbCl2\text{PbCl}_2 dissociates into one Pb2+\text{Pb}^{2+} ion and two Cl−\text{Cl}^- ions according to PbCl2(s)⇌Pb2+(aq)+2Cl−(aq)\text{PbCl}_2(s) \rightleftharpoons \text{Pb}^{2+}(aq) + 2\text{Cl}^-(aq), the concentration of chloride must be squared in the equilibrium constant expression.

  2. Step 2

    S=1.70×10−50.200=8.50×10−5 MS = \frac{1.70 \times 10^{-5}}{0.200} = 8.50 \times 10^{-5}\,\text{M}

    Correct

    S′=1.70×10−5(0.200)2=1.70×10−50.0400=4.25×10−4 MS' = \frac{1.70 \times 10^{-5}}{(0.200)^2} = \frac{1.70 \times 10^{-5}}{0.0400} = 4.25 \times 10^{-4}\,\text{M}

    You correctly solved the algebraic equation that you set up, but the value is incorrect because it inherited the missing exponent from Step 1.

  3. Step 3

    Increases because introducing NaCl\text{NaCl} supplies a large concentration of dissolved Na+\text{Na}^+ and Cl−\text{Cl}^- ions, which increases the total concentration of mobile ions in the solution.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that electrical conductivity is determined by the total concentration of dissolved mobile ions.

You recognized that NaCl\text{NaCl} completely dissociates and introduces substantial Na+\text{Na}^+ and Cl−\text{Cl}^- ions into solution.

You successfully substituted the provided equilibrium constant and chloride concentration into your linear algebraic step.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Stoichiometric Exponent in Ksp Expression

You set the solubility product as a 1:1 ratio [Pb2+][Cl−][\text{Pb}^{2+}][\text{Cl}^-] rather than [Pb2+][Cl−]2[\text{Pb}^{2+}][\text{Cl}^-]^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the stoichiometric coefficient of 2 for chloride in the dissolution equilibrium of PbCl2\text{PbCl}_2, forgetting that stoichiometric coefficients in balanced dissolution equations become powers in the equilibrium law.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dissolution Stoichiometry
  • For a salt MpXq(s)⇌pMn+(aq)+qXm−(aq)M_p X_q(s) \rightleftharpoons p M^{n+}(aq) + q X^{m-}(aq), the solubility product is Ksp=[Mn+]p[Xm−]qK_{sp} = [M^{n+}]^p [X^{m-}]^q.

  • Always write down the full dissociation equation and raise each ion concentration to its balanced stoichiometric coefficient.

Common-Ion Evaluation
  • When a common ion [Xm−][X^{m-}] is fixed by a strong electrolyte, substitute that total concentration directly into the base before applying the power qq.

  • Calculate [Xm−]q[X^{m-}]^q explicitly before dividing into KspK_{sp} to solve for solubility S′S'.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the balanced dissolution equilibrium: PbCl2(s)⇌Pb2+(aq)+2Cl−(aq)\text{PbCl}_2(s) \rightleftharpoons \text{Pb}^{2+}(aq) + 2\text{Cl}^-(aq).

  2. Set up the correct equilibrium expression: Ksp=[Pb2+][Cl−]2K_{sp} = [\text{Pb}^{2+}][\text{Cl}^-]^2.

  3. Substitute [Pb2+]=S′[\text{Pb}^{2+}] = S' and [Cl−]=0.200 M[\text{Cl}^-] = 0.200\,\text{M}: 1.70×10−5=S′(0.200)21.70 \times 10^{-5} = S'(0.200)^2.

  4. Evaluate the square and isolate S′S': S′=1.70×10−50.0400=4.25×10−4 MS' = \frac{1.70 \times 10^{-5}}{0.0400} = 4.25 \times 10^{-4}\,\text{M}.

Final answer

(a) S′=4.25×10−4 MS' = 4.25 \times 10^{-4}\,\text{M}; (b) The electrical conductivity increases substantially.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the balanced ionic equation before writing any equilibrium constant expression to verify all stoichiometric powers.

  • Double-check whether the salt has a 1:1, 1:2, or 1:3 formula type so exponents are not omitted.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly adds 2s to the common ion concentration and squares the term (2s + 0.200) instead of recognizing that the total dissolved equilibrium chloride concentration is already fixed at 0.200 M.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ksp=[Pb2+][Cl−]2=s(2s+0.200)2≈s(2×0.200)2  ⟹  1.70×10−5=s(0.400)2=0.160s  ⟹  s=1.70×10−50.160=1.06×10−4 MK_{sp} = [\text{Pb}^{2+}][\text{Cl}^-]^2 = s(2s + 0.200)^2 \approx s(2 \times 0.200)^2 \implies 1.70 \times 10^{-5} = s(0.400)^2 = 0.160s \implies s = \frac{1.70 \times 10^{-5}}{0.160} = 1.06 \times 10^{-4}\text{ M}

    Correct

    Ksp=[Pb2+][Cl−]2=S′(0.200)2=0.0400S′  ⟹  S′=1.70×10−50.0400=4.25×10−4 MK_{sp} = [\text{Pb}^{2+}][\text{Cl}^-]^2 = S'(0.200)^2 = 0.0400S' \implies S' = \frac{1.70 \times 10^{-5}}{0.0400} = 4.25 \times 10^{-4}\text{ M}

    The problem states that the dissolved chloride concentration reaches [Cl−]=0.200 M[\text{Cl}^-] = 0.200\text{ M}, so the total equilibrium chloride ion concentration is directly 0.200 M0.200\text{ M}. You do not need to add 2s2s or multiply 0.200 M0.200\text{ M} by 22.

  2. Step 2

    Increases because the addition of NaCl\text{NaCl} provides 0.200 M Na+0.200\text{ M } \text{Na}^+ and 0.200 M Cl−0.200\text{ M } \text{Cl}^-, greatly raising the total number of mobile charge carriers in the solution.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the expression for the solubility product constant, Ksp=[Pb2+][Cl−]2K_{sp} = [\text{Pb}^{2+}][\text{Cl}^-]^2.

You correctly identified that adding NaCl\text{NaCl} increases total mobile charge carriers and therefore increases conductivity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrium common-ion substitution error

You substituted (2×0.200)(2 \times 0.200) into the squared chloride term instead of directly using the stated equilibrium chloride concentration of 0.200 M0.200\text{ M}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a stated total equilibrium ion concentration with an added stoichiometric amount, leading to an unnecessary stoichiometric doubling factor inside the concentration term.

REASONING PATH
Your ACEpath teacher’s suggested approach
Stated Total Concentration vs. Added Salt
  • When a problem specifies that the ion concentration reaches a certain value at equilibrium (e.g., [Cl−]=0.200 M[\text{Cl}^-] = 0.200\text{ M}), that given value is the entire equilibrium concentration of that ion.

  • Substitute the given value directly into the equilibrium constant expression without multiplying by stoichiometric coefficients or adding 2s2s.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the equilibrium concentrations: [Pb2+]=S′[\text{Pb}^{2+}] = S' and total [Cl−]=0.200 M[\text{Cl}^-] = 0.200\text{ M}.

  2. Substitute into KspK_{sp}: 1.70×10−5=S′(0.200)2=0.0400S′1.70 \times 10^{-5} = S'(0.200)^2 = 0.0400 S'.

  3. Solve for S′S': S′=1.70×10−50.0400=4.25×10−4 MS' = \frac{1.70 \times 10^{-5}}{0.0400} = 4.25 \times 10^{-4}\text{ M}.

Final answer

(a) S′=4.25×10−4 MS' = 4.25 \times 10^{-4}\text{ M}; (b) Increases

NEXT STEPS
Final Takeaways from Your Teacher
  • Check whether a concentration given in a common-ion problem is the final equilibrium concentration or an initial added quantity.

  • Remember that stoichiometric coefficients appear as exponents in the equilibrium expression, never as multiplier prefixes to given equilibrium ion concentrations.

  • Practice problems that distinguish between 'adding x Mx\text{ M} of salt' and 'adjusting solution until [extion]=x M[ ext{ion}] = x\text{ M}'.

OverviewACEpath Teacher's Diagnosis

03 The student concludes that conductivity decreases by only considering the decrease in solubility and precipitation of multivalent Pb²⁺ ions due to the common-ion effect while ignoring the newly added Na⁺ and Cl⁻ ions.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ksp=[Pb2+][Cl−]2  ⟹  S=1.70×10−5(0.200)2=4.25×10−4 MK_{sp} = [\text{Pb}^{2+}][\text{Cl}^-]^2 \implies S = \frac{1.70 \times 10^{-5}}{(0.200)^2} = 4.25 \times 10^{-4}\text{ M}

  2. Step 2

    Decreases because the common-ion effect shifts the equilibrium left and precipitates Pb2+\text{Pb}^{2+}, greatly lowering the concentration of Pb2+\text{Pb}^{2+} ions from its initial value.

    Correct

    Electrical conductivity increases substantially because the total concentration of mobile ions rises from ≈0.049 M\approx 0.049\text{ M} in the initial saturated solution to ≈0.400 M\approx 0.400\text{ M} due to the introduction of ≈0.200 M Na+\approx 0.200\text{ M}\ \text{Na}^+ and 0.200 M Cl−0.200\text{ M}\ \text{Cl}^-.

    While you correctly recognized that [Pb2+][\text{Pb}^{2+}] decreases due to Le Chatelier's principle, overall solution conductivity is determined by the total concentration of all free mobile ions. Adding solid NaCl\text{NaCl} adds roughly 0.200 M Na+0.200\text{ M}\ \text{Na}^+ and increases [Cl−][\text{Cl}^-] to 0.200 M0.200\text{ M}, increasing the total ion concentration by almost tenfold.

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the correct KspK_{sp} expression for PbCl2\text{PbCl}_2.

You accurately computed the suppressed molar solubility of lead(II) chloride in the presence of 0.200 M0.200\text{ M} chloride ion.

You correctly identified that the common-ion effect shifts the dissolution equilibrium to the left.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting Spectator/Added Strong Electrolyte Ions in Conductivity Evaluation

You focused exclusively on the precipitating compound's cation rather than tallying all ionic species present in the final solution.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the decrease in solubility of a sparingly soluble salt with a decrease in total solution conductivity, missing that establishing the common ion required adding a strong electrolyte (NaCl\text{NaCl}) whose constituent ions (Na+\text{Na}^+ and Cl−\text{Cl}^-) vastly outnumber the precipitated ions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Aqueous Electrical Conductivity Definition
  • Electrical conductivity depends on the total concentration and mobility of all aqueous charge carriers (cations and anions), not just the ions of the sparingly soluble salt.

  • Sum the concentrations of all dissolved species, including spectator ions introduced by added strong electrolytes.

Mass and Charge Balance of Added Solute
  • Adding a strong electrolyte NaCl\text{NaCl} to increase [Cl−][\text{Cl}^-] necessarily introduces an equimolar quantity of counter-ions (Na+\text{Na}^+).

  • Always write out the dissolution equation of the added salt to account for both ions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find initial total ion concentration: In saturated PbCl2\text{PbCl}_2, [Pb2+]=S=1.70×10−543≈0.0162 M[\text{Pb}^{2+}] = S = \sqrt[3]{\frac{1.70 \times 10^{-5}}{4}} \approx 0.0162\text{ M} and [Cl−]=2S≈0.0325 M[\text{Cl}^-] = 2S \approx 0.0325\text{ M}, giving a total ion concentration of ≈0.0487 M\approx 0.0487\text{ M}.

  2. Find final total ion concentration: After adding solid NaCl\text{NaCl}, [Cl−]=0.200 M[\text{Cl}^-] = 0.200\text{ M}, [Na+]≈0.200 M[\text{Na}^+] \approx 0.200\text{ M}, and [Pb2+]=4.25×10−4 M[\text{Pb}^{2+}] = 4.25 \times 10^{-4}\text{ M}. Total ion concentration ≈0.200+0.200+0.000425≈0.400 M\approx 0.200 + 0.200 + 0.000425 \approx 0.400\text{ M}.

  3. Compare: Total mobile charge carrier density increases from ≈0.05 M\approx 0.05\text{ M} to ≈0.40 M\approx 0.40\text{ M}.

Final answer

The electrical conductivity increases substantially.

NEXT STEPS
Final Takeaways from Your Teacher
  • When evaluating conductivity changes after adding a common ion source, list every ion present before and after the addition.

  • Calculate the total ionic strength or total ion molarity to verify the net change in charge carriers.

  • Practice problems that distinguish between solubility shifts (equilibrium of one salt) and bulk physical properties (conductivity, ionic strength, colligative properties).

Lock it in

Similar question

01

Calculate the molar solubility of silver chromate (Ag2CrO4\text{Ag}_2\text{CrO}_4, Ksp=1.10×10−12K_{sp} = 1.10 \times 10^{-12}) in a 0.100 M AgNO30.100\,\text{M}\ \text{AgNO}_3 solution.

Answer

S′=1.10×10−10 MS' = 1.10 \times 10^{-10}\,\text{M}. The dissolution equation is Ag2CrO4(s)⇌2Ag+(aq)+CrO42−(aq)\text{Ag}_2\text{CrO}_4(s) \rightleftharpoons 2\text{Ag}^+(aq) + \text{CrO}_4^{2-}(aq), so Ksp=[Ag+]2[CrO42−]K_{sp} = [\text{Ag}^+]^2[\text{CrO}_4^{2-}]. Since [Ag+]≈0.100 M[\text{Ag}^+] \approx 0.100\,\text{M}, we have 1.10×10−12=(0.100)2S′=0.0100S′1.10 \times 10^{-12} = (0.100)^2 S' = 0.0100 S', giving S′=1.10×10−10 MS' = 1.10 \times 10^{-10}\,\text{M}.

02

A saturated solution of calcium hydroxide, Ca(OH)2\text{Ca(OH)}_2 (Ksp=5.50×10−6K_{sp} = 5.50 \times 10^{-6}), has solid CaCl2\text{CaCl}_2 added until [Ca2+]=0.050 M[\text{Ca}^{2+}] = 0.050\,\text{M}. Determine the resulting equilibrium concentration of hydroxide ions, [OH−][\text{OH}^-].

Answer

[OH−]=1.05×10−2 M[\text{OH}^-] = 1.05 \times 10^{-2}\,\text{M}. The equilibrium is Ca(OH)2(s)⇌Ca2+(aq)+2OH−(aq)\text{Ca(OH)}_2(s) \rightleftharpoons \text{Ca}^{2+}(aq) + 2\text{OH}^-(aq), so Ksp=[Ca2+][OH−]2K_{sp} = [\text{Ca}^{2+}][\text{OH}^-]^2. Substituting gives 5.50×10−6=(0.050)[OH−]2  ⟹  [OH−]2=1.10×10−4  ⟹  [OH−]=1.10×10−4≈1.05×10−2 M5.50 \times 10^{-6} = (0.050)[\text{OH}^-]^2 \implies [\text{OH}^-]^2 = 1.10 \times 10^{-4} \implies [\text{OH}^-] = \sqrt{1.10 \times 10^{-4}} \approx 1.05 \times 10^{-2}\,\text{M}.

03

Solid MgF2\text{MgF}_2 (Ksp=5.20×10−11K_{sp} = 5.20 \times 10^{-11}) is in equilibrium with water. If solid sodium fluoride (NaF\text{NaF}) is added until [F−]=0.020 M[\text{F}^-] = 0.020\,\text{M}, calculate: (1) the new molar solubility of MgF2\text{MgF}_2, and (2) compare the total ionic concentration before and after adding NaF\text{NaF} to show whether conductivity increases or decreases.

Answer

(1) S′=1.30×10−7 MS' = 1.30 \times 10^{-7}\,\text{M}. From Ksp=[Mg2+][F−]2K_{sp} = [\text{Mg}^{2+}][\text{F}^-]^2, we get S′(0.020)2=5.20×10−11  ⟹  S′=5.20×10−114.0×10−4=1.30×10−7 MS'(0.020)^2 = 5.20 \times 10^{-11} \implies S' = \frac{5.20 \times 10^{-11}}{4.0 \times 10^{-4}} = 1.30 \times 10^{-7}\,\text{M}. (2) In pure water, S=Ksp/43≈2.35×10−4 MS = \sqrt[3]{K_{sp}/4} \approx 2.35 \times 10^{-4}\,\text{M}, so initial total ion concentration ≈3S≈7.05×10−4 M\approx 3S \approx 7.05 \times 10^{-4}\,\text{M}. After adding NaF\text{NaF}, [Na+]≈0.020 M[\text{Na}^+] \approx 0.020\,\text{M} and [F−]=0.020 M[\text{F}^-] = 0.020\,\text{M}, giving a total ion concentration ≈0.040 M\approx 0.040\,\text{M}. Since mobile charge carrier concentration increases from ≈0.0007 M\approx 0.0007\,\text{M} to ≈0.040 M\approx 0.040\,\text{M}, electrical conductivity increases substantially.

Loading workspace…