Resources

A sealed, rigid 2.50 L2.50\text{ L} container holds 0.350 mol0.350\text{ mol} of neon gas at an initial temperature of 295 K295\text{ K}. The gas is heated until its temperature reaches 385 K385\text{ K}. Using the kinetic molecular theory (particle model) of ideal gases, calculate: (a) the initial pressure P1P_1 in atmospheres, (b) the final pressure P2P_2 in atmospheres, and (c) the ratio of the root-mean-square speed of the neon atoms at the final temperature to that at the initial temperature, vrms,2vrms,1\frac{v_{\text{rms},2}}{v_{\text{rms},1}}. Assume ideal gas behavior with R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}).

Answer and steps

Final answer

(a) P1=3.39 atmP_1 = 3.39\text{ atm}; (b) P2=4.42 atmP_2 = 4.42\text{ atm}; (c) vrms,2vrms,1=1.14\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = 1.14

Steps

Part (a): Calculating the Initial Pressure (P1P_1)

According to the ideal gas law, pressure (PP), volume (VV), amount of substance (nn), and absolute temperature (TT) are related by: PV=nRTP V = n R T

Rearranging the formula to solve for the initial pressure P1P_1: P1=nRT1VP_1 = \frac{n R T_1}{V}

Substitute the given initial values:

  • n=0.350 moln = 0.350\text{ mol}
  • R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K})
  • T1=295 KT_1 = 295\text{ K}
  • V=2.50 LV = 2.50\text{ L}

P1=0.350 mol⋅0.08206 L⋅atm/(mol⋅K)⋅295 K2.50 L=8.4727 L⋅atm2.50 L≈3.39 atmP_1 = \frac{0.350\text{ mol} \cdot 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}) \cdot 295\text{ K}}{2.50\text{ L}} = \frac{8.4727\text{ L}\cdot\text{atm}}{2.50\text{ L}} \approx 3.39\text{ atm}


Part (b): Calculating the Final Pressure (P2P_2)

Because the container is sealed and rigid, both the amount of gas (nn) and the volume (VV) remain constant.

According to the kinetic molecular theory, heating the gas increases the average kinetic energy of the particles. As the particles move faster, they collide with the walls of the container more frequently and with greater force, resulting in an increase in pressure that is directly proportional to the absolute temperature (Gay-Lussac's Law): P1T1=P2T2\frac{P_1}{T_1} = \frac{P_2}{T_2}

Rearranging for P2P_2: P2=P1⋅T2T1P_2 = P_1 \cdot \frac{T_2}{T_1}

Substitute P1=3.389 atmP_1 = 3.389\text{ atm}, T1=295 KT_1 = 295\text{ K}, and T2=385 KT_2 = 385\text{ K}: P2=3.389 atm⋅385 K295 K≈4.42 atmP_2 = 3.389\text{ atm} \cdot \frac{385\text{ K}}{295\text{ K}} \approx 4.42\text{ atm}

(Alternatively, calculating directly via P2=nRT2VP_2 = \frac{n R T_2}{V} yields the same value: 0.350⋅0.08206⋅3852.50≈4.42 atm\frac{0.350 \cdot 0.08206 \cdot 385}{2.50} \approx 4.42\text{ atm}.)


Part (c): Ratio of Root-Mean-Square Speeds (vrms,2vrms,1\frac{v_{\text{rms},2}}{v_{\text{rms},1}})

The kinetic molecular theory relates the root-mean-square speed (vrmsv_{\text{rms}}) of ideal gas particles directly to absolute temperature and molar mass (MM): vrms=3RTMv_{\text{rms}} = \sqrt{\frac{3 R T}{M}}

Because the gas identity does not change (molar mass MM of neon is constant), the ratio of the speeds simplifies to the square root of the ratio of their absolute temperatures: vrms,2vrms,1=3RT2M3RT1M=T2T1\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \frac{\sqrt{\frac{3 R T_2}{M}}}{\sqrt{\frac{3 R T_1}{M}}} = \sqrt{\frac{T_2}{T_1}}

Substitute the absolute temperatures: vrms,2vrms,1=385 K295 K=1.3051≈1.14\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \sqrt{\frac{385\text{ K}}{295\text{ K}}} = \sqrt{1.3051} \approx 1.14

Common Pitfall: Always use absolute temperatures in Kelvin (K\text{K}) when evaluating gas laws and particle velocities. Using Celsius directly will yield incorrect ratios and pressures.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that root-mean-square speed is proportional to the square root of absolute temperature and calculates the speed ratio as a direct linear temperature ratio.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P1=nRT1V=0.350×0.08206×2952.50  ⟹  P1=3.39 atmP_1 = \frac{n R T_1}{V} = \frac{0.350 \times 0.08206 \times 295}{2.50} \implies P_1 = 3.39\text{ atm}

  2. Step 2

    P2=P1×T2T1=3.39×(385295)  ⟹  P2=4.42 atmP_2 = P_1 \times \frac{T_2}{T_1} = 3.39 \times \left(\frac{385}{295}\right) \implies P_2 = 4.42\text{ atm}

  3. Step 3

    vrms,2vrms,1=T2T1=385295  ⟹  vrms,2vrms,1=1.31\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \frac{T_2}{T_1} = \frac{385}{295} \implies \frac{v_{\text{rms},2}}{v_{\text{rms},1}} = 1.31

    Correct

    vrms,2vrms,1=T2T1=385 K295 K=1.3051≈1.14\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \sqrt{\frac{T_2}{T_1}} = \sqrt{\frac{385\text{ K}}{295\text{ K}}} = \sqrt{1.3051} \approx 1.14

    Root-mean-square speed is proportional to the square root of absolute temperature (vrms=3RTMv_{\text{rms}} = \sqrt{\frac{3RT}{M}}), because kinetic energy is proportional to the square of velocity.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the ideal gas law to solve for initial pressure.

You recognized that volume and molar amount stay constant during heating to calculate the final pressure.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear instead of square root temperature dependence for rms speed

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated particle speed as directly proportional to temperature (v∝Tv \propto T) rather than recognizing that temperature measures average kinetic energy, which depends on the square of speed (T∝vrms2T \propto v_{\text{rms}}^2, leading to vrms∝Tv_{\text{rms}} \propto \sqrt{T}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Molecular Theory Speed Formula
  • The root-mean-square speed of ideal gas particles is vrms=3RTMv_{\text{rms}} = \sqrt{\frac{3RT}{M}}, meaning vrms∝Tv_{\text{rms}} \propto \sqrt{T}.

  • Always take the square root of the absolute temperature ratio when comparing particle speeds of the same gas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the ratio using the rms formula: vrms,2vrms,1=3RT2/M3RT1/M=T2T1\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \frac{\sqrt{3RT_2/M}}{\sqrt{3RT_1/M}} = \sqrt{\frac{T_2}{T_1}}.

  2. Substitute the temperatures: 385 K295 K=1.3051≈1.14\sqrt{\frac{385\text{ K}}{295\text{ K}}} = \sqrt{1.3051} \approx 1.14.

Final answer

(a) P1=3.39 atmP_1 = 3.39\text{ atm}; (b) P2=4.42 atmP_2 = 4.42\text{ atm}; (c) vrms,2vrms,1=1.14\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = 1.14

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the kinetic molecular derivation connecting kinetic energy (12mv2\frac{1}{2}mv^2) to temperature (32kBT\frac{3}{2}k_B T).

  • Practice identifying whether a gas property depends linearly on TT (like pressure at constant volume) or on T\sqrt{T} (like rms speed and effusion rate).

OverviewACEpath Teacher's Diagnosis

02 The student inverts the temperature ratio when calculating the ratio of the final rms speed to the initial rms speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P1=nRT1V  ⟹  P1=(0.350×0.08206×295)2.50  ⟹  P1=3.39 atmP_1 = \frac{nRT_1}{V} \implies P_1 = \frac{(0.350 \times 0.08206 \times 295)}{2.50} \implies P_1 = 3.39\text{ atm}

  2. Step 2

    P2=nRT2V  ⟹  P2=(0.350×0.08206×385)2.50  ⟹  P2=4.42 atmP_2 = \frac{nRT_2}{V} \implies P_2 = \frac{(0.350 \times 0.08206 \times 385)}{2.50} \implies P_2 = 4.42\text{ atm}

  3. Step 3

    vrms,2vrms,1=T1T2=295385\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \sqrt{\frac{T_1}{T_2}} = \sqrt{\frac{295}{385}}

    Correct

    vrms,2vrms,1=T2T1=385 K295 K\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \sqrt{\frac{T_2}{T_1}} = \sqrt{\frac{385\text{ K}}{295\text{ K}}}

    Because root-mean-square speed is directly proportional to T\sqrt{T}, the ratio vrms,2vrms,1\frac{v_{\text{rms},2}}{v_{\text{rms},1}} must equal T2T1\sqrt{\frac{T_2}{T_1}}, not T1T2\sqrt{\frac{T_1}{T_2}}.

  4. Step 4

    vrms,2vrms,1=0.875\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = 0.875

    Correct

    vrms,2vrms,1≈1.14\frac{v_{\text{rms},2}}{v_{\text{rms},1}} \approx 1.14

    Your numerical evaluation accurately computed the square root of the fraction you wrote, but it inherits the inverted ratio from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the ideal gas law to solve for both initial pressure P1P_1 and final pressure P2P_2.

You properly used absolute temperatures in Kelvin throughout the problem.

You correctly recognized that the root-mean-square speed depends on the square root of temperature.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted ratio formula

You set up the ratio with the initial temperature in the numerator and the final temperature in the denominator instead of matching final to final and initial to initial.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the temperature dependence as an inverse ratio rather than keeping the indices aligned for a direct proportion, forgetting to sanity-check that heating a gas must make particles move faster (ratio > 1).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match indices in direct proportions
  • For any direct power relationship y∝xky \propto x^k, the ratio is y2y1=(x2x1)k\frac{y_2}{y_1} = \left(\frac{x_2}{x_1}\right)^k.

  • Pair subscript 2 in the numerator with subscript 2 in the numerator on the other side.

Physical sense check
  • Higher temperature corresponds to higher average kinetic energy and higher particle speed.

  • Check whether your ratio is greater than 1 when a gas is heated and less than 1 when it is cooled.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute T2=385 KT_2 = 385\text{ K} and T1=295 KT_1 = 295\text{ K} into the direct square-root ratio: vrms,2vrms,1=385295\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \sqrt{\frac{385}{295}}.

  2. Compute the quotient inside the radical: 385295≈1.3051\frac{385}{295} \approx 1.3051.

  3. Take the square root: 1.3051≈1.14\sqrt{1.3051} \approx 1.14.

Final answer

(a) P1=3.39 atmP_1 = 3.39\text{ atm}; (b) P2=4.42 atmP_2 = 4.42\text{ atm}; (c) vrms,2vrms,1=1.14\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = 1.14

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how direct proportions maintain index alignment: v2v1=T2T1\frac{v_2}{v_1} = \sqrt{\frac{T_2}{T_1}}.

  • Always perform a physical sanity check: if the gas is heated (T2>T1T_2 > T_1), the final speed must be greater than the initial speed (vrms,2/vrms,1>1v_{\text{rms},2}/v_{\text{rms},1} > 1).

OverviewACEpath Teacher's Diagnosis

03 The student misapplies Gay-Lussac's law by writing an inverse proportionality between pressure and temperature, calculating P₂ = P₁ × (T₁ / T₂).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P1=nRT1V  ⟹  P1=0.350×0.08206×2952.50  ⟹  P1=3.39 atmP_1 = \frac{nRT_1}{V} \implies P_1 = \frac{0.350 \times 0.08206 \times 295}{2.50} \implies P_1 = 3.39\text{ atm}

  2. Step 2

    P2=P1×(T1T2)  ⟹  P2=3.39×(295385)  ⟹  P2=2.60 atmP_2 = P_1 \times \left(\frac{T_1}{T_2}\right) \implies P_2 = 3.39 \times \left(\frac{295}{385}\right) \implies P_2 = 2.60\text{ atm}

    Correct

    P2=P1×(T2T1)=3.39×(385295)≈4.42 atmP_2 = P_1 \times \left(\frac{T_2}{T_1}\right) = 3.39 \times \left(\frac{385}{295}\right) \approx 4.42\text{ atm}

    At constant volume and mole count, pressure is directly proportional to absolute temperature (Gay-Lussac's law, P1T1=P2T2\frac{P_1}{T_1} = \frac{P_2}{T_2}). Heating the gas causes particles to move faster and collide with the container walls more forcefully and frequently, which must increase pressure rather than decrease it.

  3. Step 3

    vrms,2vrms,1=T2T1  ⟹  vrms,2vrms,1=385295  ⟹  vrms,2vrms,1=1.14\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \sqrt{\frac{T_2}{T_1}} \implies \frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \sqrt{\frac{385}{295}} \implies \frac{v_{\text{rms},2}}{v_{\text{rms},1}} = 1.14

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the ideal gas equation PV=nRTPV = nRT to solve for P1P_1.

You correctly recognized that vrmsv_{\text{rms}} scales with the square root of absolute temperature T\sqrt{T}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted proportionality in Gay-Lussac's Law

You multiplied by T1T2\frac{T_1}{T_2} instead of T2T1\frac{T_2}{T_1} when finding the final pressure.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated pressure and absolute temperature as an inverse relationship rather than a direct relationship at constant volume. Conceptually, increasing temperature increases particle kinetic energy and collision frequency/force, which always increases the pressure in a rigid container.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gay-Lussac's Law Proportionality
  • In a rigid, sealed container (VV and nn constant), pressure is directly proportional to absolute temperature: P1T1=P2T2\frac{P_1}{T_1} = \frac{P_2}{T_2}, so P2=P1(T2T1)P_2 = P_1 \left(\frac{T_2}{T_1}\right).

  • Before calculating, perform a physical sanity check: if the gas is heated (T2>T1T_2 > T_1), the pressure must rise (P2>P1P_2 > P_1). If your calculated pressure decreases upon heating, check whether your temperature ratio was inverted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State Gay-Lussac's law for a rigid container: P1T1=P2T2\frac{P_1}{T_1} = \frac{P_2}{T_2}

  2. Rearrange for final pressure: P2=P1×T2T1P_2 = P_1 \times \frac{T_2}{T_1}

  3. Substitute the values: P2=3.39 atm×385 K295 K≈4.42 atmP_2 = 3.39\text{ atm} \times \frac{385\text{ K}}{295\text{ K}} \approx 4.42\text{ atm}

Final answer

(a) P1=3.39 atmP_1 = 3.39\text{ atm}; (b) P2=4.42 atmP_2 = 4.42\text{ atm}; (c) vrms,2vrms,1=1.14\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = 1.14

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the microscopic interpretation of pressure: pressure arises from particle-wall collisions, so higher thermal energy must create higher wall pressure at fixed volume.

  • Always verify that the multiplier TnewTold\frac{T_{\text{new}}}{T_{\text{old}}} is greater than 11 whenever a gas is heated at constant volume.

Lock it in

Similar question

01

A sample of helium gas is heated from 300 K300\text{ K} to 1200 K1200\text{ K}. Calculate the ratio of the final root-mean-square speed to the initial root-mean-square speed, vrms,2vrms,1\frac{v_{\text{rms},2}}{v_{\text{rms},1}}.

Answer

vrms,2vrms,1=T2T1=1200 K300 K=4=2.00\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \sqrt{\frac{T_2}{T_1}} = \sqrt{\frac{1200\text{ K}}{300\text{ K}}} = \sqrt{4} = 2.00.

02

An argon gas sample at 250 K250\text{ K} has an rms speed of 395 m/s395\text{ m/s}. To what temperature must the gas be heated so that its rms speed increases to 500 m/s500\text{ m/s}?

Answer

Since vrms∝Tv_{\text{rms}} \propto \sqrt{T}, T2T1=(v2v1)2\frac{T_2}{T_1} = \left(\frac{v_2}{v_1}\right)^2. Thus, T2=250 K×(500395)2≈250 K×1.602≈401 KT_2 = 250\text{ K} \times \left(\frac{500}{395}\right)^2 \approx 250\text{ K} \times 1.602 \approx 401\text{ K}.

03

A rigid 5.00 L5.00\text{ L} cylinder contains 0.500 mol0.500\text{ mol} of N2\text{N}_2 at 200 K200\text{ K}. The gas is heated until the pressure doubles. (a) Find the final temperature T2T_2. (b) Determine the ratio of the final rms speed to the initial rms speed.

Answer

(a) At constant volume, pressure is directly proportional to temperature (P∝TP \propto T). If pressure doubles, temperature doubles: T2=2×200 K=400 KT_2 = 2 \times 200\text{ K} = 400\text{ K}. (b) The speed ratio is vrms,2vrms,1=T2T1=2≈1.41\frac{v_{\text{rms},2}}{v_{\text{rms},1}} = \sqrt{\frac{T_2}{T_1}} = \sqrt{2} \approx 1.41.

Loading workspace…