Resources

An acidic redox reaction couples the permanganate reduction half-cell with the oxidation of oxalic acid: MnO4−(aq)+8H+(aq)+5e−→Mn2+(aq)+4H2O(l)E∘=+1.51 V\text{MnO}_4^-(aq) + 8\text{H}^+(aq) + 5e^- \rightarrow \text{Mn}^{2+}(aq) + 4\text{H}_2\text{O}(l) \quad E^\circ = +1.51\text{ V} 2CO2(g)+2H+(aq)+2e−→H2C2O4(aq)E∘=−0.49 V2\text{CO}_2(g) + 2\text{H}^+(aq) + 2e^- \rightarrow \text{H}_2\text{C}_2\text{O}_4(aq) \quad E^\circ = -0.49\text{ V} (a) Balance the overall spontaneous net ionic equation in acidic solution by finding the lowest common multiple of electrons transferred (nn). (b) Calculate the standard cell potential Ecell∘E^\circ_{\text{cell}}. (c) If a constant current of 2.50 A2.50\text{ A} is drawn from this cell for exactly 45.0 min45.0\text{ min}, calculate the mass (in grams) of CO2(g)\text{CO}_2(g) evolved (molar mass of CO2=44.01 g/mol\text{CO}_2 = 44.01\text{ g/mol}, F=96,485 C/molF = 96{,}485\text{ C/mol}).

Answer and steps

Final answer

(a) 2MnO4−(aq)+5H2C2O4(aq)+6H+(aq)→2Mn2+(aq)+10CO2(g)+8H2O(l)2\text{MnO}_4^-(aq) + 5\text{H}_2\text{C}_2\text{O}_4(aq) + 6\text{H}^+(aq) \rightarrow 2\text{Mn}^{2+}(aq) + 10\text{CO}_2(g) + 8\text{H}_2\text{O}(l), where n=10n = 10; (b) Ecell∘=+2.00 VE^\circ_{\text{cell}} = +2.00\text{ V}; (c) Mass of CO2=3.08 g\text{CO}_2 = 3.08\text{ g}.

Steps

Part (a): Balancing the Overall Spontaneous Reaction

  1. Identify the cathode and anode half-reactions: A spontaneous electrochemical cell requires a positive cell potential (Ecell∘>0E^\circ_{\text{cell}} > 0). Therefore, the half-cell with the more positive standard reduction potential undergoes reduction at the cathode:

    • Cathode (reduction): MnOX4X−(aq)+8 HX+(aq)+5 eX−→MnX2+(aq)+4 HX2O(l)E∘=+1.51 V\ce{MnO_4^-(aq) + 8H^+(aq) + 5e^- -> Mn^{2+}(aq) + 4H_2O(l)} \quad E^\circ = +1.51\text{ V}
    • Anode (oxidation): Reverse the given reduction half-reaction for oxalic acid: HX2CX2OX4(aq)→2 COX2(g)+2 HX+(aq)+2 eX−Ered∘=−0.49 V\ce{H_2C_2O_4(aq) -> 2CO_2(g) + 2H^+(aq) + 2e^-} \quad E^\circ_{\text{red}} = -0.49\text{ V}
  2. Determine the number of electrons transferred (nn): The reduction reaction consumes 5e−5e^- while the oxidation reaction produces 2e−2e^-. The lowest common multiple of 55 and 22 is: n=10n = 10
  3. Multiply each half-reaction to equalize electron transfer:

    • Multiply the reduction half-reaction by 22: 2 MnOX4X−(aq)+16 HX+(aq)+10 eX−→2 MnX2+(aq)+8 HX2O(l)\ce{2MnO_4^-(aq) + 16H^+(aq) + 10e^- -> 2Mn^{2+}(aq) + 8H_2O(l)}
    • Multiply the oxidation half-reaction by 55: 5 HX2CX2OX4(aq)→10 COX2(g)+10 HX+(aq)+10 eX−\ce{5H_2C_2O_4(aq) -> 10CO_2(g) + 10H^+(aq) + 10e^-}
  4. Combine and simplify: Add both half-reactions and cancel the common species (10e−10e^- on both sides and 10HX+10\ce{H^+} from each side): 2 MnOX4X−(aq)+5 HX2CX2OX4(aq)+6 HX+(aq)→2 MnX2+(aq)+10 COX2(g)+8 HX2O(l)\ce{2MnO_4^-(aq) + 5H_2C_2O_4(aq) + 6H^+(aq) -> 2Mn^{2+}(aq) + 10CO_2(g) + 8H_2O(l)}

Part (b): Calculating the Standard Cell Potential (Ecell∘E^\circ_{\text{cell}})

Using standard reduction potentials: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}

Substitute the given values: Ecell∘=+1.51 V−(−0.49 V)=+2.00 VE^\circ_{\text{cell}} = +1.51\text{ V} - (-0.49\text{ V}) = +2.00\text{ V}

Common Pitfall: Do not multiply the standard reduction potential by stoichiometric coefficients when balancing electrons; E∘E^\circ is an intensive property and does not scale with reaction coefficients.


Part (c): Calculating the Mass of COX2\ce{CO_2} Produced

  1. Calculate the total charge (QQ) passed through the cell: Convert time into seconds: t=45.0 min×60 s/min=2700 st = 45.0\text{ min} \times 60\text{ s/min} = 2700\text{ s} Q=I⋅t=(2.50 A)⋅(2700 s)=6750 CQ = I \cdot t = (2.50\text{ A}) \cdot (2700\text{ s}) = 6750\text{ C}
  2. Calculate the moles of electrons transferred (ne−n_{e^-}): ne−=QF=6750 C96,485 C/mol≈0.06996 moln_{e^-} = \frac{Q}{F} = \frac{6750\text{ C}}{96{,}485\text{ C/mol}} \approx 0.06996\text{ mol}
  3. Determine the moles of COX2\ce{CO_2} evolved: From the oxidation half-reaction (HX2CX2OX4→2 COX2+2 HX++2 eX−\ce{H_2C_2O_4 -> 2CO_2 + 2H^+ + 2e^-}), 2 mol2\text{ mol} of COX2\ce{CO_2} are generated per 2 mol2\text{ mol} of electrons transferred (a 1:11:1 stoichiometric mole ratio): nCOX2=ne−⋅(2 mol COX22 mol e−)=0.06996 moln_{\ce{CO_2}} = n_{e^-} \cdot \left(\frac{2\text{ mol }\ce{CO_2}}{2\text{ mol }e^-}\right) = 0.06996\text{ mol}
  4. Convert moles of COX2\ce{CO_2} to mass: Mass of COX2=nCOX2⋅MCOX2=0.06996 mol×44.01 g/mol≈3.08 g\text{Mass of }\ce{CO_2} = n_{\ce{CO_2}} \cdot M_{\ce{CO_2}} = 0.06996\text{ mol} \times 44.01\text{ g/mol} \approx 3.08\text{ g}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies the standard reduction potential by stoichiometric coefficients when balancing the cell reaction, resulting in an incorrect cell potential of +5.47 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    LCM of 5e− and 2e−  ⟹  n=10  ⟹  2MnO4−+16H++10e−→2Mn2++8H2O  ⟹  5H2C2O4→10CO2+10H++10e−  ⟹  2MnO4−(aq)+5H2C2O4(aq)+6H+(aq)→2Mn2+(aq)+10CO2(g)+8H2O(l)\text{LCM of } 5e^- \text{ and } 2e^- \implies n = 10 \implies 2\text{MnO}_4^- + 16\text{H}^+ + 10e^- \rightarrow 2\text{Mn}^{2+} + 8\text{H}_2\text{O} \implies 5\text{H}_2\text{C}_2\text{O}_4 \rightarrow 10\text{CO}_2 + 10\text{H}^+ + 10e^- \implies 2\text{MnO}_4^-(aq) + 5\text{H}_2\text{C}_2\text{O}_4(aq) + 6\text{H}^+(aq) \rightarrow 2\text{Mn}^{2+}(aq) + 10\text{CO}_2(g) + 8\text{H}_2\text{O}(l)

  2. Step 2

    Ecell∘=2(+1.51 V)−5(−0.49 V)  ⟹  Ecell∘=3.02 V+2.45 V=+5.47 VE^\circ_{\text{cell}} = 2(+1.51\text{ V}) - 5(-0.49\text{ V}) \implies E^\circ_{\text{cell}} = 3.02\text{ V} + 2.45\text{ V} = +5.47\text{ V}

    Correct

    Ecell∘=Ecathode∘−Eanode∘=+1.51 V−(−0.49 V)=+2.00 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +1.51\text{ V} - (-0.49\text{ V}) = +2.00\text{ V}

    You multiplied the standard reduction potentials by 22 and 55. Because electric potential is an intensive property (energy per unit charge, 1 V=1 J/C1\text{ V} = 1\text{ J/C}), it does not scale with reaction stoichiometric coefficients.

  3. Step 3

    t=45.0×60=2700 s  ⟹  Q=2.50 A×2700 s=6750 C  ⟹  ne=675096485=0.06996 mol  ⟹  nCO2=ne=0.06996 mol  ⟹  mass of CO2=0.06996 mol×44.01 g/mol=3.08 gt = 45.0 \times 60 = 2700\text{ s} \implies Q = 2.50\text{ A} \times 2700\text{ s} = 6750\text{ C} \implies n_e = \frac{6750}{96485} = 0.06996\text{ mol} \implies n_{\text{CO}_2} = n_e = 0.06996\text{ mol} \implies \text{mass of } \text{CO}_2 = 0.06996\text{ mol} \times 44.01\text{ g/mol} = 3.08\text{ g}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly balanced the acidic redox reaction by finding the lowest common multiple of transferred electrons (n=10n = 10).

You correctly calculated the charge and used Faraday's constant and molar mass to find the mass of CO2\text{CO}_2 produced.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scaling an intensive property by stoichiometric coefficients

You treated cell potential as an extensive thermodynamic quantity (like enthalpy or Gibbs free energy) and multiplied it by reaction coefficients.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing intensive properties with extensive properties in electrochemistry. While ΔG∘=−nFE∘\Delta G^\circ = -nFE^\circ scales with the stoichiometric factor nn, standard reduction potential E∘E^\circ represents voltage (energy per unit charge) and is fundamentally independent of the quantity of substance reacting.

REASONING PATH
Your ACEpath teacher’s suggested approach
Intensive vs. Extensive Quantities
  • Standard reduction potentials (E∘E^\circ) are intensive properties and must never be multiplied by balancing coefficients.

  • Always evaluate Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} directly using the unmodified values from the standard reduction potential table.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the cathode and anode from standard reduction potentials: the more positive half-cell is the cathode (MnO4−/Mn2+\text{MnO}_4^- / \text{Mn}^{2+}, E∘=+1.51 VE^\circ = +1.51\text{ V}) and the less positive is the anode (CO2/H2C2O4\text{CO}_2 / \text{H}_2\text{C}_2\text{O}_4, E∘=−0.49 VE^\circ = -0.49\text{ V}).

  2. Apply the standard cell potential formula without multiplying by stoichiometric multipliers: Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}.

  3. Compute the numerical value: Ecell∘=+1.51 V−(−0.49 V)=+2.00 VE^\circ_{\text{cell}} = +1.51\text{ V} - (-0.49\text{ V}) = +2.00\text{ V}.

Final answer

Ecell∘=+2.00 VE^\circ_{\text{cell}} = +2.00\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that voltage is potential difference (Joule per Coulomb); doubling the reaction doubles both the energy (Joules) and the charge (Coulombs), leaving the voltage unchanged.

  • Practice calculating Ecell∘E^\circ_{\text{cell}} for redox systems that require disparate half-reaction multipliers (such as 3e−3e^- and 2e−2e^-) to build the habit of leaving E∘E^\circ values unscaled.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert time from minutes to seconds when calculating charge Q, yielding 112.5 C and an erroneously small mass of 0.0513 g of CO2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    LCM of 5e− and 2e− gives n=10  ⟹  2⋅(MnOX4X−+8 HX++5 eX−→MnX2++4 HX2O) and 5⋅(HX2CX2OX4→2 COX2+2 HX++2 eX−)  ⟹  2 MnOX4X−(aq)+5 HX2CX2OX4(aq)+6 HX+(aq)→2 MnX2+(aq)+10 COX2(g)+8 HX2O(l)\text{LCM of } 5e^- \text{ and } 2e^- \text{ gives } n = 10 \implies 2 \cdot (\ce{MnO4- + 8H+ + 5e- -> Mn^{2+} + 4H2O}) \text{ and } 5 \cdot (\ce{H2C2O4 -> 2CO2 + 2H+ + 2e-}) \implies \ce{2MnO4-(aq) + 5H2C2O4(aq) + 6H+(aq) -> 2Mn^{2+}(aq) + 10CO2(g) + 8H2O(l)}

  2. Step 2

    Ecell∘=Ecathode∘−Eanode∘=+1.51 V−(−0.49 V)=+2.00 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +1.51\text{ V} - (-0.49\text{ V}) = +2.00\text{ V}

  3. Step 3

    Q=I⋅t=2.50 A⋅45.0 min=112.5 CQ = I \cdot t = 2.50\text{ A} \cdot 45.0\text{ min} = 112.5\text{ C}

    Correct

    t=45.0 min×60 s/min=2700 s  ⟹  Q=I⋅t=(2.50 A)(2700 s)=6750 Ct = 45.0\text{ min} \times 60\text{ s/min} = 2700\text{ s} \implies Q = I \cdot t = (2.50\text{ A})(2700\text{ s}) = 6750\text{ C}

    An ampere is defined as one coulomb per second (A=C/s\text{A} = \text{C}/\text{s}). You multiplied current by time in minutes rather than seconds, resulting in a charge value that is 6060 times too small.

  4. Step 4

    ne=112.5 C96,485 C/mol=0.001166 mol  ⟹  nCOX2=ne=0.001166 mol  ⟹  mass of COX2=0.001166 mol⋅44.01 g/mol=0.0513 gn_e = \frac{112.5\text{ C}}{96{,}485\text{ C/mol}} = 0.001166\text{ mol} \implies n_{\ce{CO2}} = n_e = 0.001166\text{ mol} \implies \text{mass of } \ce{CO2} = 0.001166\text{ mol} \cdot 44.01\text{ g/mol} = 0.0513\text{ g}

    Correct

    ne−=6750 C96,485 C/mol≈0.06996 mol  ⟹  nCOX2=0.06996 mol  ⟹  m=(0.06996 mol)(44.01 g/mol)≈3.08 gn_{e^-} = \frac{6750\text{ C}}{96{,}485\text{ C/mol}} \approx 0.06996\text{ mol} \implies n_{\ce{CO2}} = 0.06996\text{ mol} \implies m = (0.06996\text{ mol})(44.01\text{ g/mol}) \approx 3.08\text{ g}

    Your stoichiometry (1 mol COX21\text{ mol }\ce{CO2} per 1 mol e−1\text{ mol }e^-) and molar mass calculation were entirely correct, but the final numerical result was affected by the initial charge unit error.

WHAT YOU DID WELL
Compliments from Your Teacher

You balanced the net ionic equation accurately using the method of half-reactions and found n=10n = 10.

You calculated the standard cell potential correctly using standard reduction potentials.

You correctly recognized the 1:11:1 stoichiometric ratio between electrons transferred and moles of COX2\ce{CO2} produced.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error in Faraday's Law

You substituted the elapsed time in minutes directly into Q=I⋅tQ = I \cdot t instead of converting to seconds.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the SI base definition of electric current (1 A=1 C⋅s−1\text{1 A} = 1\text{ C}\cdot\text{s}^{-1}), which requires time to be expressed strictly in seconds before calculating charge or moles of electrons.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency for Charge
  • 1 A=1 C/s1\text{ A} = 1\text{ C/s}, so Q=I⋅tQ = I \cdot t requires tt in seconds.

  • Always write out unit factors explicitly: t=(time in min)×(60 s1 min)t = (\text{time in min}) \times \left(\frac{60\text{ s}}{1\text{ min}}\right) before multiplying by current in amperes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert time to seconds: t=45.0 min×60 s/min=2700 st = 45.0\text{ min} \times 60\text{ s/min} = 2700\text{ s}.

  2. Calculate charge: Q=(2.50 A)(2700 s)=6750 CQ = (2.50\text{ A})(2700\text{ s}) = 6750\text{ C}.

  3. Determine moles of electrons: ne−=6750 C96,485 C/mol≈0.06996 moln_{e^-} = \frac{6750\text{ C}}{96{,}485\text{ C/mol}} \approx 0.06996\text{ mol}.

  4. Use the stoichiometric ratio (2 mol COX2:2 mol e−2\text{ mol }\ce{CO2} : 2\text{ mol }e^-): nCOX2=0.06996 moln_{\ce{CO2}} = 0.06996\text{ mol}.

  5. Convert to mass: mCOX2=0.06996 mol×44.01 g/mol≈3.08 gm_{\ce{CO2}} = 0.06996\text{ mol} \times 44.01\text{ g/mol} \approx 3.08\text{ g}.

Final answer

Mass of COX2=3.08 g\ce{CO2} = 3.08\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include units alongside numbers at every step of Faraday's law calculations to ensure A⋅s\text{A} \cdot \text{s} cancels to C\text{C}.

  • Perform a quick order-of-magnitude check: a 2.5 A2.5\text{ A} current running for nearly an hour transfers thousands of coulombs, not just around 100 C100\text{ C}.

OverviewACEpath Teacher's Diagnosis

03 The student misapplies the electron stoichiometry by using 2 moles of electrons per mole of CO2 instead of 1 mole of electrons per mole of CO2, calculating half the correct mass as 1.54 g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Multiply permanganate half-reaction by 2 and oxalic acid half-reaction by 5 for n=10n = 10   ⟹  2MnOX4X−+16HX++10e−→2MnX2++8HX2O\implies 2\ce{MnO4-} + 16\ce{H+} + 10e^- \rightarrow 2\ce{Mn^{2+}} + 8\ce{H2O}   ⟹  5HX2CX2OX4→10COX2+10HX++10e−\implies 5\ce{H2C2O4} \rightarrow 10\ce{CO2} + 10\ce{H+} + 10e^-   ⟹  2MnOX4X−(aq)+5HX2CX2OX4(aq)+6HX+(aq)→2MnX2+(aq)+10COX2(g)+8HX2O(l)\implies 2\ce{MnO4-}(aq) + 5\ce{H2C2O4}(aq) + 6\ce{H+}(aq) \rightarrow 2\ce{Mn^{2+}}(aq) + 10\ce{CO2}(g) + 8\ce{H2O}(l)

  2. Step 2

    Ecell∘=1.51 V−(−0.49 V)=+2.00 VE^\circ_{\text{cell}} = 1.51\text{ V} - (-0.49\text{ V}) = +2.00\text{ V}

  3. Step 3

    t=45.0×60 s=2700 s  ⟹  Q=2.50 A×2700 s=6750 C  ⟹  ne=6750 C96485 C/mol=0.06996 molt = 45.0 \times 60\text{ s} = 2700\text{ s} \implies Q = 2.50\text{ A} \times 2700\text{ s} = 6750\text{ C} \implies n_e = \frac{6750\text{ C}}{96485\text{ C/mol}} = 0.06996\text{ mol}

  4. Step 4

    nCOX2=0.06996 mol e−×(1 mol COX22 mol e−)=0.03498 moln_{\ce{CO2}} = 0.06996\text{ mol } e^- \times \left(\frac{1\text{ mol }\ce{CO2}}{2\text{ mol } e^-}\right) = 0.03498\text{ mol}

    Correct

    nCOX2=0.06996 mol e−×(2 mol COX22 mol e−)=0.06996 moln_{\ce{CO2}} = 0.06996\text{ mol } e^- \times \left(\frac{2\text{ mol }\ce{CO2}}{2\text{ mol } e^-}\right) = 0.06996\text{ mol}

    You applied a ratio of 1 mol COX21\text{ mol }\ce{CO2} to 2 mol e−2\text{ mol } e^-. From the half-reaction HX2CX2OX4→2 COX2+2 HX++2 eX−\ce{H2C2O4 -> 2CO2 + 2H+ + 2e^-} (or 10COX210\ce{CO2} per 10e−10e^- in the overall reaction), 2 mol2\text{ mol} of COX2\ce{CO2} are generated per 2 mol2\text{ mol} of electrons transferred, giving a 1:11:1 ratio.

  5. Step 5

    mass of COX2=0.03498 mol×44.01 g/mol=1.54 g\text{mass of }\ce{CO2} = 0.03498\text{ mol} \times 44.01\text{ g/mol} = 1.54\text{ g}

    Correct

    mass of COX2=0.06996 mol×44.01 g/mol≈3.08 g\text{mass of }\ce{CO2} = 0.06996\text{ mol} \times 44.01\text{ g/mol} \approx 3.08\text{ g}

    Your molar mass calculation followed correctly from your previous mole value, but the final numerical result was halved due to the stoichiometry error in Step 4.

WHAT YOU DID WELL
Compliments from Your Teacher

You balanced the acidic redox reaction and identified the transferred electron count n=10n = 10 perfectly.

You calculated the standard cell potential using the correct cathode and anode assignments.

You converted units and applied Faraday's constant correctly to find the total moles of transferred electrons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric electron mole ratio error

You used a 1:21:2 ratio for COX2\ce{CO2} to e−e^- instead of the true stoichiometric ratio of 2:22:2 (or 1:11:1).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely confused the stoichiometric coefficient of the reactant (1 mole of HX2CX2OX4\ce{H2C2O4} produces 2 moles of e−e^-) with that of the gaseous product (2 moles of COX2\ce{CO2} are produced alongside 2 moles of e−e^-).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match stoichiometric coefficients directly from the half-reaction
  • In electrolysis/cell stoichiometry, nsubstancene−=coefficient of substancecoefficient of e−\frac{n_{\text{substance}}}{n_{e^-}} = \frac{\text{coefficient of substance}}{\text{coefficient of } e^-} from the same balanced half-reaction.

  • Always circle both the target species and the electrons in the balanced half-reaction before writing down the conversion factor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the stoichiometric relationship from the oxidation half-reaction: HX2CX2OX4(aq)→2 COX2(g)+2 HX+(aq)+2 eX−\ce{H2C2O4(aq) -> 2CO2(g) + 2H+(aq) + 2e^-}.

  2. Write the mole ratio: 2 mol COX22 mol e−=1 mol COX2/mol e−\frac{2\text{ mol }\ce{CO2}}{2\text{ mol } e^-} = 1\text{ mol }\ce{CO2}/\text{mol } e^-.

  3. Calculate moles of COX2\ce{CO2}: nCOX2=0.06996 mol e−×1=0.06996 moln_{\ce{CO2}} = 0.06996\text{ mol } e^- \times 1 = 0.06996\text{ mol}.

  4. Calculate mass: m=0.06996 mol×44.01 g/mol≈3.08 gm = 0.06996\text{ mol} \times 44.01\text{ g/mol} \approx 3.08\text{ g}.

Final answer

3.08 g

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the relevant half-reaction explicitly right above your dimensional analysis line.

  • Check that the numerator coefficient matches the specific species you are solving for, not a neighboring reactant or product.

Lock it in

Similar question

01

A galvanic cell couples the half-reactions Ag+(aq)+e−→Ag(s)\text{Ag}^+(aq) + e^- \rightarrow \text{Ag}(s) (E∘=+0.80 VE^\circ = +0.80\text{ V}) and Cu2+(aq)+2e−→Cu(s)\text{Cu}^{2+}(aq) + 2e^- \rightarrow \text{Cu}(s) (E∘=+0.34 VE^\circ = +0.34\text{ V}). Calculate the standard cell potential Ecell∘E^\circ_{\text{cell}}.

Answer

Ecell∘=+0.46 VE^\circ_{\text{cell}} = +0.46\text{ V}. Reduction of Ag+\text{Ag}^+ occurs at the cathode (+0.80 V+0.80\text{ V}) and oxidation of Cu\text{Cu} at the anode (+0.34 V+0.34\text{ V}). Thus, Ecell∘=Ecathode∘−Eanode∘=+0.80 V−0.34 V=+0.46 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = +0.80\text{ V} - 0.34\text{ V} = +0.46\text{ V}. Even though the silver half-reaction is multiplied by 22 to balance electrons, its potential is not multiplied.

02

Consider a cell combining Cr2O72−+14H++6e−→2Cr3++7H2O\text{Cr}_2\text{O}_7^{2-} + 14\text{H}^+ + 6e^- \rightarrow 2\text{Cr}^{3+} + 7\text{H}_2\text{O} (E∘=+1.33 VE^\circ = +1.33\text{ V}) with Fe3++e−→Fe2+\text{Fe}^{3+} + e^- \rightarrow \text{Fe}^{2+} (E∘=+0.77 VE^\circ = +0.77\text{ V}). (a) Balance the overall spontaneous net ionic equation. (b) Find Ecell∘E^\circ_{\text{cell}} and the standard free energy change ΔG∘\Delta G^\circ in kJ (F=96,485 C/molF = 96{,}485\text{ C/mol}).

Answer

(a) Cr2O72−+14H++6Fe2+→2Cr3++6Fe3++7H2O\text{Cr}_2\text{O}_7^{2-} + 14\text{H}^+ + 6\text{Fe}^{2+} \rightarrow 2\text{Cr}^{3+} + 6\text{Fe}^{3+} + 7\text{H}_2\text{O} (n=6n = 6). (b) Ecell∘=+1.33 V−0.77 V=+0.56 VE^\circ_{\text{cell}} = +1.33\text{ V} - 0.77\text{ V} = +0.56\text{ V}. ΔG∘=−nFEcell∘=−(6)(96,485 C/mol)(0.56 J/C)=−3.24×105 J=−324 kJ\Delta G^\circ = -nFE^\circ_{\text{cell}} = -(6)(96{,}485\text{ C/mol})(0.56\text{ J/C}) = -3.24 \times 10^5\text{ J} = -324\text{ kJ}.

03

A cell running the reaction 2Al(s)+3I2(s)→2Al3+(aq)+6I−(aq)2\text{Al}(s) + 3\text{I}_2(s) \rightarrow 2\text{Al}^{3+}(aq) + 6\text{I}^-(aq) operates at standard conditions. Given I2+2e−→2I−\text{I}_2 + 2e^- \rightarrow 2\text{I}^- (E∘=+0.54 VE^\circ = +0.54\text{ V}) and Al3++3e−→Al\text{Al}^{3+} + 3e^- \rightarrow \text{Al} (E∘=−1.66 VE^\circ = -1.66\text{ V}), calculate Ecell∘E^\circ_{\text{cell}} and determine the time in minutes required for a 1.80 A1.80\text{ A} current to consume 1.50 g1.50\text{ g} of Al\text{Al} (atomic mass of Al=26.98 g/mol\text{Al} = 26.98\text{ g/mol}, F=96,485 C/molF = 96{,}485\text{ C/mol}).

Answer

Ecell∘=+0.54 V−(−1.66 V)=+2.20 VE^\circ_{\text{cell}} = +0.54\text{ V} - (-1.66\text{ V}) = +2.20\text{ V}. Moles of Al=1.50/26.98=0.0556 mol\text{Al} = 1.50 / 26.98 = 0.0556\text{ mol}. Each mole of Al\text{Al} releases 3 mol e−3\text{ mol } e^-, so ne−=3×0.0556=0.1668 mol e−n_{e^-} = 3 \times 0.0556 = 0.1668\text{ mol } e^-. Total charge Q=0.1668×96,485=16,092 CQ = 0.1668 \times 96{,}485 = 16{,}092\text{ C}. Time t=Q/I=16,092/1.80=8940 s≈149 mint = Q / I = 16{,}092 / 1.80 = 8940\text{ s} \approx 149\text{ min}.

Loading workspace…