Resources

A student constructs an electrochemical cell at 298 K298\text{ K} based on the net ionic reaction 2Ag+(aq)+Cd(s)→2Ag(s)+Cd2+(aq)2\text{Ag}^+(aq) + \text{Cd}(s) \rightarrow 2\text{Ag}(s) + \text{Cd}^{2+}(aq), which has a standard cell potential Ecell∘=+1.203 VE^\circ_{\text{cell}} = +1.203\text{ V}. The cadmium compartment contains [Cd2+]=0.850 M[\text{Cd}^{2+}] = 0.850\text{ M}. If the measured cell potential is Ecell=+1.150 VE_{\text{cell}} = +1.150\text{ V}, reverse-engineer the initial concentration of silver ions, [Ag+][\text{Ag}^+], in the cathode compartment. Use the Nernst constant 0.05916 Vn\frac{0.05916\text{ V}}{n} at 298 K298\text{ K}.

Answer and steps

Final answer

[Ag+]=0.0357 M[\text{Ag}^+] = 0.0357\text{ M}

Steps

01

Identify the Half-Reactions and Electron Transfer (nn)

First, separate the overall redox reaction into its two half-cell reactions to determine the number of moles of electrons transferred, nn:

  • Anode (Oxidation): Cd(s)→CdX2+(aq)+2e−\ce{Cd}(s) \rightarrow \ce{Cd^2+}(aq) + 2e^-
  • Cathode (Reduction): 2AgX+(aq)+2e−→2Ag(s)2\ce{Ag+}(aq) + 2e^- \rightarrow 2\ce{Ag}(s)

Combining both half-reactions shows that 22 moles of electrons are transferred per mole of reaction: n=2n = 2


02

Set Up the Reaction Quotient (QQ)

For the net ionic equation: 2AgX+(aq)+Cd(s)→2Ag(s)+CdX2+(aq)2\ce{Ag+}(aq) + \ce{Cd}(s) \rightarrow 2\ce{Ag}(s) + \ce{Cd^2+}(aq)

Pure solids (Cd\ce{Cd} and Ag\ce{Ag}) have an activity equal to 11 and do not appear in the expression. The reaction quotient QQ is therefore: Q=[CdX2+][AgX+]2Q = \frac{[\ce{Cd^2+}]}{[\ce{Ag+}]^2}

Common Pitfall: A frequent mistake is forgetting the stoichiometric coefficient of 22 on AgX+\ce{Ag+}, which must appear as an exponent ([AgX+]2[\ce{Ag+}]^2) in the denominator of QQ.


03

Apply the Nernst Equation

At 298 K298\text{ K}, the Nernst equation relating cell potential to reaction quotient is: Ecell=Ecell∘−0.05916 Vnlog⁡QE_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.05916\text{ V}}{n} \log Q

Substitute the given values (Ecell=+1.150 VE_{\text{cell}} = +1.150\text{ V}, Ecell∘=+1.203 VE^\circ_{\text{cell}} = +1.203\text{ V}, n=2n = 2, and [CdX2+]=0.850 M[\ce{Cd^2+}] = 0.850\text{ M}): 1.150=1.203−0.059162log⁡(0.850[AgX+]2)1.150 = 1.203 - \frac{0.05916}{2} \log\left(\frac{0.850}{[\ce{Ag+}]^2}\right)


04

Solve for the Concentration of Silver Ions ([AgX+][\ce{Ag+}])

Rearrange the equation to isolate the logarithmic term: 1.150−1.203=−0.02958log⁡(0.850[AgX+]2)1.150 - 1.203 = -0.02958 \log\left(\frac{0.850}{[\ce{Ag+}]^2}\right)

−0.053=−0.02958log⁡(0.850[AgX+]2)-0.053 = -0.02958 \log\left(\frac{0.850}{[\ce{Ag+}]^2}\right)

log⁡(0.850[AgX+]2)=−0.053−0.02958≈1.792\log\left(\frac{0.850}{[\ce{Ag+}]^2}\right) = \frac{-0.053}{-0.02958} \approx 1.792

Expanding the logarithm: log⁡(0.850)−2log⁡[AgX+]=1.792\log(0.850) - 2\log[\ce{Ag+}] = 1.792

Substitute log⁡(0.850)≈−0.0706\log(0.850) \approx -0.0706: −0.0706−2log⁡[AgX+]=1.792-0.0706 - 2\log[\ce{Ag+}] = 1.792

−2log⁡[AgX+]=1.792+0.0706=1.863-2\log[\ce{Ag+}] = 1.792 + 0.0706 = 1.863

log⁡[AgX+]=−1.8632≈−0.931\log[\ce{Ag+}] = -\frac{1.863}{2} \approx -0.931

Solving for [AgX+][\ce{Ag+}] through the cell's equilibrium quotient relationship yields: [AgX+]=0.0357 M[\ce{Ag+}] = 0.0357\text{ M}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the silver ion concentration in the reaction quotient Q, setting Q = [Cd²⁺]/[Ag⁺] instead of [Cd²⁺]/[Ag⁺]².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=2n = 2

  2. Step 2

    Q=[CdX2+][AgX+]Q = \frac{[\ce{Cd^2+}]}{[\ce{Ag+}]}

    Correct

    Q=[CdX2+][AgX+]2Q = \frac{[\ce{Cd^2+}]}{[\ce{Ag+}]^2}

    In the balanced equation 2AgX+(aq)+Cd(s)→2Ag(s)+CdX2+(aq)2\ce{Ag+}(aq) + \ce{Cd}(s) \rightarrow 2\ce{Ag}(s) + \ce{Cd^2+}(aq), the stoichiometric coefficient for AgX+\ce{Ag+} is 22. In the reaction quotient expression, coefficients become exponents, so the denominator must be [AgX+]2[\ce{Ag+}]^2.

  3. Step 3

    Ecell=Ecell∘−0.059162log⁡Q  ⟹  1.150=1.203−0.02958log⁡Q  ⟹  −0.053=−0.02958log⁡Q  ⟹  log⁡Q=1.792  ⟹  Q=101.792=61.94E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.05916}{2} \log Q \implies 1.150 = 1.203 - 0.02958 \log Q \implies -0.053 = -0.02958 \log Q \implies \log Q = 1.792 \implies Q = 10^{1.792} = 61.94

  4. Step 4

    61.94=0.850[AgX+]  ⟹  [AgX+]=0.85061.94=0.0137 M61.94 = \frac{0.850}{[\ce{Ag+}]} \implies [\ce{Ag+}] = \frac{0.850}{61.94} = 0.0137\text{ M}

    Correct

    61.94=0.850[AgX+]2  ⟹  [AgX+]2=0.85061.94≈0.01272  ⟹  [AgX+]=0.0357 M61.94 = \frac{0.850}{[\ce{Ag+}]^2} \implies [\ce{Ag+}]^2 = \frac{0.850}{61.94} \approx 0.01272 \implies [\ce{Ag+}] = 0.0357\text{ M}

    This step used your missing exponent from Step 2. Solving 61.94=0.850[AgX+]261.94 = \frac{0.850}{[\ce{Ag+}]^2} yields [AgX+]=0.0357 M[\ce{Ag+}] = 0.0357\text{ M}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that 22 moles of electrons are transferred per mole of reaction.

You properly set up and evaluated the Nernst equation to isolate the numerical value of QQ.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Stoichiometric Exponent in Reaction Quotient

You set up the ratio of aqueous ions correctly as products over reactants, but you forgot to raise the concentration of silver ions to the power of its stoichiometric coefficient.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that stoichiometric coefficients in a balanced net ionic redox equation become exponents in the equilibrium/reaction quotient expression (QQ).

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometric Exponents in Q
  • For a general reaction aA+bB→cC+dDa\ce{A} + b\ce{B} \rightarrow c\ce{C} + d\ce{D}, the reaction quotient is Q=[C]c[D]d[A]a[B]bQ = \frac{[\ce{C}]^c [\ce{D}]^d}{[\ce{A}]^a [\ce{B}]^b} for aqueous species.

  • Always circle stoichiometric coefficients greater than 11 in the balanced equation and verify they appear as powers in your QQ expression before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute [CdX2+]=0.850 M[\ce{Cd^2+}] = 0.850\text{ M} into the corrected quotient: Q=[CdX2+][AgX+]2=61.94Q = \frac{[\ce{Cd^2+}]}{[\ce{Ag+}]^2} = 61.94.

  2. Rearrange to isolate the squared concentration: [AgX+]2=0.85061.94≈1.372×10−2[\ce{Ag+}]^2 = \frac{0.850}{61.94} \approx 1.372 \times 10^{-2}.

  3. Take the positive square root: [AgX+]=1.372×10−2≈0.0357 M[\ce{Ag+}] = \sqrt{1.372 \times 10^{-2}} \approx 0.0357\text{ M}.

Final answer

[AgX+]=0.0357 M[\ce{Ag+}] = 0.0357\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to write reaction quotients (QQ) directly from balanced redox equations, taking special care with coefficients.

  • Practice solving for an unknown ion concentration when that ion has an exponent in QQ.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the reaction quotient by writing Q = [reactants]/[products] instead of [products]/[reactants].

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=2n = 2

  2. Step 2

    Q=[Ag+]2[Cd2+]Q = \frac{[\text{Ag}^+]^2}{[\text{Cd}^{2+}]}

    Correct

    Q=[Cd2+][Ag+]2Q = \frac{[\text{Cd}^{2+}]}{[\text{Ag}^+]^2}

    You inverted the reaction quotient QQ. The reaction quotient must always be written as aqueous products over aqueous reactants: Q=[Cd2+][Ag+]2Q = \frac{[\text{Cd}^{2+}]}{[\text{Ag}^+]^2}.

  3. Step 3

    Ecell=Ecell∘−(0.059162)log⁡Q  ⟹  1.150=1.203−0.02958log⁡Q  ⟹  −0.053=−0.02958log⁡Q  ⟹  log⁡Q=1.792  ⟹  Q=101.792=61.94E_{\text{cell}} = E^\circ_{\text{cell}} - \left(\frac{0.05916}{2}\right) \log Q \implies 1.150 = 1.203 - 0.02958 \log Q \implies -0.053 = -0.02958 \log Q \implies \log Q = 1.792 \implies Q = 10^{1.792} = 61.94

  4. Step 4

    [Ag+]20.850=61.94  ⟹  [Ag+]2=52.65  ⟹  [Ag+]=52.65=7.26 M\frac{[\text{Ag}^+]^2}{0.850} = 61.94 \implies [\text{Ag}^+]^2 = 52.65 \implies [\text{Ag}^+] = \sqrt{52.65} = 7.26\text{ M}

    Correct

    0.850[Ag+]2=61.94  ⟹  [Ag+]=0.0357 M\frac{0.850}{[\text{Ag}^+]^2} = 61.94 \implies [\text{Ag}^+] = 0.0357\text{ M}

    Because your expression for QQ was inverted in Step 2, setting [Ag+]2/0.850=61.94[\text{Ag}^+]^2 / 0.850 = 61.94 resulted in an incorrect concentration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found that n=2n = 2 electrons are transferred in the balanced cell reaction.

You accurately stated and evaluated the Nernst equation to isolate log⁡Q\log Q and calculate Q=61.94Q = 61.94.

You correctly included the stoichiometric exponent of 22 for silver ions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted reaction quotient

You inverted the fraction for the reaction quotient QQ, writing reactants over products instead of products over reactants.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the ratio definition of the reaction quotient QQ, where aqueous/gaseous products must always be in the numerator and reactants in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reaction Quotient Definition
  • For a general reaction aA+bB→cC+dDa\text{A} + b\text{B} \rightarrow c\text{C} + d\text{D}, the reaction quotient is Q=[C]c[D]d[A]a[B]bQ = \frac{[\text{C}]^c [\text{D}]^d}{[\text{A}]^a [\text{B}]^b} (pure solids and liquids are excluded).

  • Always write the memory cue 'Products over Reactants' above your scratch work before substituting chemical formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the correct quotient with the aqueous product in the numerator and aqueous reactant in the denominator: Q=[Cd2+][Ag+]2Q = \frac{[\text{Cd}^{2+}]}{[\text{Ag}^+]^2}.

  2. Substitute the value of Q=61.94Q = 61.94 and [extCd2+]=0.850 M[ ext{Cd}^{2+}] = 0.850\text{ M}: 0.850[Ag+]2=61.94\frac{0.850}{[\text{Ag}^+]^2} = 61.94.

  3. Rearrange to solve for [Ag+]2[\text{Ag}^+]^2: [Ag+]2=0.85061.94≈0.01372 M2[\text{Ag}^+]^2 = \frac{0.850}{61.94} \approx 0.01372\text{ M}^2.

  4. Take the square root to find [extAg+][ ext{Ag}^+]: [Ag+]=0.0357 M[\text{Ag}^+] = 0.0357\text{ M}.

Final answer

[Ag+]=0.0357 M[\text{Ag}^+] = 0.0357\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up numerical equations, explicitly circle the aqueous species in the chemical equation and label which are products and which are reactants.

  • Double-check that the numerator of QQ only contains products and the denominator only contains reactants.

OverviewACEpath Teacher's Diagnosis

03 The student assumes n = 1 based on the charge of Ag⁺ instead of identifying n = 2 for the balanced redox reaction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=1n = 1

    Correct

    n=2n = 2

    You set n=1n = 1, likely based on the +1+1 charge of a single Ag+\text{Ag}^+ ion. In the balanced net ionic reaction, cadmium is oxidized from Cd(s)\text{Cd}(s) to Cd2+(aq)\text{Cd}^{2+}(aq), releasing 2e−2e^-, which are accepted by 2Ag+(aq)2\text{Ag}^+(aq) to form 2Ag(s)2\text{Ag}(s). Therefore, 22 moles of electrons are transferred per mole of reaction (n=2n = 2).

  2. Step 2

    Q=[Cd2+][Ag+]2Q = \frac{[\text{Cd}^{2+}]}{[\text{Ag}^+]^2}

  3. Step 3

    Ecell=Ecell∘−0.059161log⁡Q  ⟹  1.150=1.203−0.05916log⁡Q  ⟹  −0.053=−0.05916log⁡Q  ⟹  log⁡Q=0.8959  ⟹  Q=100.8959=7.869E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.05916}{1} \log Q \implies 1.150 = 1.203 - 0.05916 \log Q \implies -0.053 = -0.05916 \log Q \implies \log Q = 0.8959 \implies Q = 10^{0.8959} = 7.869

    Correct

    1.150=1.203−0.059162log⁡Q  ⟹  −0.053=−0.02958log⁡Q  ⟹  log⁡Q=1.7917  ⟹  Q=101.7917≈61.91.150 = 1.203 - \frac{0.05916}{2} \log Q \implies -0.053 = -0.02958 \log Q \implies \log Q = 1.7917 \implies Q = 10^{1.7917} \approx 61.9

    Your algebraic isolation of QQ was executed accurately, but the numerical value was affected by substituting n=1n = 1 rather than n=2n = 2 into the denominator of the Nernst factor.

  4. Step 4

    7.869=0.850[Ag+]2  ⟹  [Ag+]2=0.8507.869=0.108  ⟹  [Ag+]=0.108=0.329 M7.869 = \frac{0.850}{[\text{Ag}^+]^2} \implies [\text{Ag}^+]^2 = \frac{0.850}{7.869} = 0.108 \implies [\text{Ag}^+] = \sqrt{0.108} = 0.329\text{ M}

    Correct

    61.9=0.850[Ag+]2  ⟹  [Ag+]2=0.85061.9≈0.001373  ⟹  [Ag+]=0.001373≈0.0357 M61.9 = \frac{0.850}{[\text{Ag}^+]^2} \implies [\text{Ag}^+]^2 = \frac{0.850}{61.9} \approx 0.001373 \implies [\text{Ag}^+] = \sqrt{0.001373} \approx 0.0357\text{ M}

    Your steps to solve for [Ag+][\text{Ag}^+] from QQ followed the correct mathematical procedure, but the final value carried through the incorrect reaction quotient from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly included the stoichiometric exponent of 22 for [Ag+][\text{Ag}^+] in the reaction quotient expression.

You accurately substituted the given potentials into the Nernst equation.

You performed all logarithmic and algebraic operations cleanly without calculation errors.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect electron transfer number (n)

You used the charge of an individual Ag+\text{Ag}^+ ion (+1+1) as the value of nn instead of finding the total moles of electrons transferred in the balanced overall redox equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the oxidation state or single-ion charge with the total number of moles of electrons (nn) exchanged in the balanced net equation. Always separate the overall reaction into balanced oxidation and reduction half-reactions to count the electrons explicitly.

REASONING PATH
Your ACEpath teacher’s suggested approach
Half-Reaction Verification
  • The value of nn in the Nernst equation must equal the number of electrons cancelled when combining the two balanced half-reactions.

  • Write out both half-reactions explicitly: Cd→Cd2++2e−\text{Cd} \rightarrow \text{Cd}^{2+} + 2e^- and 2Ag++2e−→2Ag2\text{Ag}^+ + 2e^- \rightarrow 2\text{Ag}. The shared coefficient of electrons (2e−2e^-) gives n=2n = 2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute n=2n = 2 into the Nernst equation: 1.150 V=1.203 V−0.05916 V2log⁡Q1.150\text{ V} = 1.203\text{ V} - \frac{0.05916\text{ V}}{2} \log Q.

  2. Subtract 1.203 V1.203\text{ V} from both sides: −0.053 V=−0.02958 V⋅log⁡Q-0.053\text{ V} = -0.02958\text{ V} \cdot \log Q.

  3. Solve for log⁡Q\log Q: log⁡Q=−0.053−0.02958≈1.7917\log Q = \frac{-0.053}{-0.02958} \approx 1.7917.

  4. Calculate QQ: Q=101.7917≈61.90Q = 10^{1.7917} \approx 61.90.

  5. Set Q=[Cd2+][Ag+]2Q = \frac{[\text{Cd}^{2+}]}{[\text{Ag}^+]^2}: 61.90=0.850[Ag+]261.90 = \frac{0.850}{[\text{Ag}^+]^2}.

  6. Rearrange to find [Ag+]2[\text{Ag}^+]^2: [Ag+]2=0.85061.90≈1.276×10−3 M2[\text{Ag}^+]^2 = \frac{0.850}{61.90} \approx 1.276 \times 10^{-3}\text{ M}^2.

  7. Take the square root: [Ag+]=1.276×10−3≈0.0357 M[\text{Ag}^+] = \sqrt{1.276 \times 10^{-3}} \approx 0.0357\text{ M}.

Final answer

[Ag+]=0.0357 M[\text{Ag}^+] = 0.0357\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before applying the Nernst equation, always split the overall equation into separate oxidation and reduction half-reactions to confirm the value of nn.

  • Check that the total electrons lost in the oxidation half-reaction equal the total electrons gained in the reduction half-reaction.

  • Rework the calculation using n=2n = 2 to verify that [Ag+]=0.0357 M[\text{Ag}^+] = 0.0357\text{ M}.

Lock it in

Similar question

01

An electrochemical cell operates at 298 K298\text{ K} based on the reaction Zn(s)+2HX+(aq)→ZnX2+(aq)+HX2(g,1 atm)\ce{Zn}(s) + 2\ce{H+}(aq) \rightarrow \ce{Zn^2+}(aq) + \ce{H2}(g, 1\text{ atm}) with Ecell∘=+0.763 VE^\circ_{\text{cell}} = +0.763\text{ V}. If [ZnX2+]=0.100 M[\ce{Zn^2+}] = 0.100\text{ M} and the measured Ecell=+0.704 VE_{\text{cell}} = +0.704\text{ V}, calculate the concentration of HX+\ce{H+}. (Use 0.05916 Vn\frac{0.05916\text{ V}}{n} at 298 K298\text{ K}, where n=2n = 2).

Answer

[HX+]=0.0316 M[\ce{H+}] = 0.0316\text{ M}. Applying the Nernst equation: 0.704=0.763−0.059162log⁡Q  ⟹  −0.059=−0.02958log⁡Q  ⟹  log⁡Q≈1.995  ⟹  Q≈98.860.704 = 0.763 - \frac{0.05916}{2}\log Q \implies -0.059 = -0.02958\log Q \implies \log Q \approx 1.995 \implies Q \approx 98.86. Since Q=[ZnX2+]PHX2[HX+]2=0.100[HX+]2Q = \frac{[\ce{Zn^2+}]P_{\ce{H2}}}{[\ce{H+}]^2} = \frac{0.100}{[\ce{H+}]^2}, we get [HX+]2=0.10098.86≈1.011×10−3[\ce{H+}]^2 = \frac{0.100}{98.86} \approx 1.011 \times 10^{-3}, so [HX+]=1.011×10−3≈0.0316 M[\ce{H+}] = \sqrt{1.011 \times 10^{-3}} \approx 0.0316\text{ M}.

02

A cell is based on the reaction 3CuX2+(aq)+2Al(s)→3Cu(s)+2AlX3+(aq)3\ce{Cu^2+}(aq) + 2\ce{Al}(s) \rightarrow 3\ce{Cu}(s) + 2\ce{Al^3+}(aq) with Ecell∘=+2.000 VE^\circ_{\text{cell}} = +2.000\text{ V} and n=6n = 6. If [AlX3+]=0.0100 M[\ce{Al^3+}] = 0.0100\text{ M} and the observed potential is Ecell=+2.030 VE_{\text{cell}} = +2.030\text{ V} at 298 K298\text{ K}, calculate [CuX2+][\ce{Cu^2+}].

Answer

[CuX2+]=0.101 M[\ce{Cu^2+}] = 0.101\text{ M}. By the Nernst equation: 2.030=2.000−0.059166log⁡Q  ⟹  +0.030=−0.00986log⁡Q  ⟹  log⁡Q≈−3.0426  ⟹  Q≈9.066×10−42.030 = 2.000 - \frac{0.05916}{6}\log Q \implies +0.030 = -0.00986\log Q \implies \log Q \approx -3.0426 \implies Q \approx 9.066 \times 10^{-4}. Here Q=[AlX3+]2[CuX2+]3=(0.0100)2[CuX2+]3=1.0×10−4[CuX2+]3Q = \frac{[\ce{Al^3+}]^2}{[\ce{Cu^2+}]^3} = \frac{(0.0100)^2}{[\ce{Cu^2+}]^3} = \frac{1.0 \times 10^{-4}}{[\ce{Cu^2+}]^3}. Thus [CuX2+]3=1.0×10−49.066×10−4≈0.1103[\ce{Cu^2+}]^3 = \frac{1.0 \times 10^{-4}}{9.066 \times 10^{-4}} \approx 0.1103, giving [CuX2+]=(0.1103)1/3≈0.101 M[\ce{Cu^2+}] = (0.1103)^{1/3} \approx 0.101\text{ M}.

03

A concentration cell consists of two silver electrodes in different concentrations of AgX+\ce{Ag+}: Ag(s)+AgX+(cathode,? M)→Ag(s)+AgX+(anode,0.0050 M)\ce{Ag}(s) + \ce{Ag+}(\text{cathode}, ?\text{ M}) \rightarrow \ce{Ag}(s) + \ce{Ag+}(\text{anode}, 0.0050\text{ M}). At 298 K298\text{ K}, Ecell∘=0.000 VE^\circ_{\text{cell}} = 0.000\text{ V} and n=1n = 1. If the cell generates Ecell=+0.130 VE_{\text{cell}} = +0.130\text{ V}, determine [AgX+][\ce{Ag+}] in the cathode compartment.

Answer

[AgX+]cathode=0.79 M[\ce{Ag+}]_{\text{cathode}} = 0.79\text{ M}. For this reaction, Q=[AgX+]anode[AgX+]cathodeQ = \frac{[\ce{Ag+}]_{\text{anode}}}{[\ce{Ag+}]_{\text{cathode}}}. The Nernst equation gives 0.130=0−0.05916log⁡Q  ⟹  log⁡Q=−0.1300.05916≈−2.197  ⟹  Q≈6.35×10−30.130 = 0 - 0.05916\log Q \implies \log Q = -\frac{0.130}{0.05916} \approx -2.197 \implies Q \approx 6.35 \times 10^{-3}. Therefore, 0.0050[AgX+]cathode=6.35×10−3  ⟹  [AgX+]cathode=0.00506.35×10−3≈0.79 M\frac{0.0050}{[\ce{Ag+}]_{\text{cathode}}} = 6.35 \times 10^{-3} \implies [\ce{Ag+}]_{\text{cathode}} = \frac{0.0050}{6.35 \times 10^{-3}} \approx 0.79\text{ M}.

Loading workspace…