Resources

A standard electrochemical cell is assembled using a lead half-cell (Pb2++2e−→Pb(s)\text{Pb}^{2+} + 2e^- \rightarrow \text{Pb}(s), E∘=−0.13 VE^\circ = -0.13\text{ V}) and a cadmium half-cell (Cd2++2e−→Cd(s)\text{Cd}^{2+} + 2e^- \rightarrow \text{Cd}(s), E∘=−0.40 VE^\circ = -0.40\text{ V}). The cell is allowed to deliver a steady current of 250 mA250\text{ mA} for exactly 3.50 hours3.50\text{ hours}. (a) Identify the anode and cathode electrodes, and state the direction of external electron flow. (b) Calculate the mass change in grams of the anode electrode after this period (F=96,485 C/molF = 96,485\text{ C/mol}, molar mass of Cd=112.41 g/mol\text{Cd} = 112.41\text{ g/mol}, Pb=207.2 g/mol\text{Pb} = 207.2\text{ g/mol}).

Answer and steps

Final answer

(a) Anode: Cd(s)\text{Cd}(s), Cathode: Pb(s)\text{Pb}(s), electrons flow externally from the Cd\text{Cd} electrode to the Pb\text{Pb} electrode; (b) The anode loses 1.83 g1.83\text{ g} of mass (Δmanode=−1.83 g\Delta m_{\text{anode}} = -1.83\text{ g}).

Steps

Part (a): Identifying the Anode, Cathode, and Electron Flow

  1. Compare standard reduction potentials (E∘E^\circ):

    • PbX2+(aq)+2 eX−→Pb(s)(E∘=−0.13 V)\ce{Pb^2+(aq) + 2e- -> Pb(s)} \quad (E^\circ = -0.13\text{ V})
    • CdX2+(aq)+2 eX−→Cd(s)(E∘=−0.40 V)\ce{Cd^2+(aq) + 2e- -> Cd(s)} \quad (E^\circ = -0.40\text{ V})
  2. Determine the spontaneous reactions:

    • A more positive (less negative) reduction potential indicates a greater tendency to gain electrons (undergo reduction). Because −0.13 V>−0.40 V-0.13\text{ V} > -0.40\text{ V}, lead ions (PbX2+\ce{Pb^2+}) are spontaneously reduced, while solid cadmium (Cd\ce{Cd}) is spontaneously oxidized.
    • Cathode (reduction site): PbX2+(aq)+2 eX−→Pb(s)\ce{Pb^2+(aq) + 2e- -> Pb(s)}
    • Anode (oxidation site): Cd(s)→CdX2+(aq)+2 eX−\ce{Cd(s) -> Cd^2+(aq) + 2e-}
  3. External electron flow:

    • Electrons are generated at the anode by oxidation and consumed at the cathode by reduction. Therefore, electrons flow through the external circuit from the Cd\ce{Cd} electrode (anode) to the Pb\ce{Pb} electrode (cathode).

Part (b): Calculating the Mass Change of the Anode

  1. Calculate the total electric charge passed (QQ): Convert current to amperes (1 mA=10−3 A1\text{ mA} = 10^{-3}\text{ A}) and time to seconds (1 h=3600 s1\text{ h} = 3600\text{ s}): I=250 mA=0.250 AI = 250\text{ mA} = 0.250\text{ A} t=3.50 h×3600 s/h=12,600 st = 3.50\text{ h} \times 3600\text{ s/h} = 12{,}600\text{ s} Q=I⋅t=0.250 A⋅12,600 s=3150 CQ = I \cdot t = 0.250\text{ A} \cdot 12{,}600\text{ s} = 3150\text{ C}
  2. Calculate the amount of electrons transferred (nen_e): Using Faraday's constant (F=96,485 C/molF = 96{,}485\text{ C/mol}): ne=QF=3150 C96,485 C/mol≈0.03265 mol e−n_e = \frac{Q}{F} = \frac{3150\text{ C}}{96{,}485\text{ C/mol}} \approx 0.03265\text{ mol } e^-
  3. Determine the moles and mass of cadmium oxidized: The oxidation half-reaction at the anode is: Cd(s)→CdX2+(aq)+2 eX−\ce{Cd(s) -> Cd^2+(aq) + 2e-} This shows that 1 mol1\text{ mol} of Cd\ce{Cd} produces 2 mol2\text{ mol} of electrons (z=2z = 2): nCd=ne2=0.03265 mol2≈0.01632 moln_{\ce{Cd}} = \frac{n_e}{2} = \frac{0.03265\text{ mol}}{2} \approx 0.01632\text{ mol}

    Multiplying by the molar mass of cadmium (M=112.41 g/molM = 112.41\text{ g/mol}): mCd=0.01632 mol⋅112.41 g/mol≈1.83 gm_{\ce{Cd}} = 0.01632\text{ mol} \cdot 112.41\text{ g/mol} \approx 1.83\text{ g}

  4. Sign of the mass change: Because solid Cd\ce{Cd} is oxidized into aqueous CdX2+\ce{Cd^2+} ions, it enters the solution, causing the anode to lose mass. Therefore, the mass change of the anode is: Δmanode=−1.83 g(a mass loss of 1.83 g)\Delta m_{\text{anode}} = -1.83\text{ g} \quad (\text{a mass loss of } 1.83\text{ g})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the standard reduction potentials by assuming the half-cell with the more negative E° undergoes reduction, reversing the identity of the anode and cathode.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E∘(Cd2+/Cd)=−0.40 VE^\circ(\text{Cd}^{2+}/\text{Cd}) = -0.40\text{ V} is more negative, so Cd\text{Cd} is reduced at the cathode.   ⟹  E∘(Pb2+/Pb)=−0.13 V\implies E^\circ(\text{Pb}^{2+}/\text{Pb}) = -0.13\text{ V} is the anode.   ⟹  Anode: Pb,Cathode: Cd\implies \text{Anode: Pb}, \text{Cathode: Cd}; Electrons flow externally from Pb\text{Pb} anode to Cd\text{Cd} cathode.

    Correct

    Compare standard reduction potentials: since −0.13 V>−0.40 V-0.13\text{ V} > -0.40\text{ V}, Pb2+\text{Pb}^{2+} is reduced at the cathode (Pb\text{Pb}) and Cd\text{Cd} is oxidized at the anode (Cd\text{Cd}). Electrons flow externally from the Cd\text{Cd} anode to the Pb\text{Pb} cathode.

    A more positive (or less negative) reduction potential indicates a greater thermodynamic tendency to gain electrons (undergo reduction). Because −0.13 V>−0.40 V-0.13\text{ V} > -0.40\text{ V}, Pb2+\text{Pb}^{2+} undergoes reduction at the cathode, while Cd\text{Cd} undergoes oxidation at the anode.

  2. Step 2

    Q=0.250 A×3.50×3600 s=3150 C  ⟹  n(e−)=315096,485=0.03265 molQ = 0.250\text{ A} \times 3.50 \times 3600\text{ s} = 3150\text{ C} \implies n(e^-) = \frac{3150}{96{,}485} = 0.03265\text{ mol}

  3. Step 3

    Anode reaction: \text{Anode reaction: } Pb\text{Pb}(s) →\rightarrow Pb\text{Pb}^{2+} + 2e^-   ⟹  \implies n(Pb\text{Pb}) = 0.032652\frac{0.03265}{2} = 0.01632 mol\text{ mol}   ⟹  \implies Mass change\text{Mass change} = -0.01632 mol\text{ mol} ×\times 207.2 g/mol\text{ g/mol} = -3.38 g\text{ g}

    Correct

    Anode reaction: \text{Anode reaction: } Cd\text{Cd}(s) →\rightarrow Cd\text{Cd}^{2+} + 2e^-   ⟹  \implies n(Cd\text{Cd}) = 0.03265 mol2\frac{0.03265\text{ mol}}{2} = 0.01632 mol\text{ mol}   ⟹  \implies Δ\Delta m_{anode\text{anode}} = -0.01632 mol\text{ mol} ×\times 112.41 g/mol\text{ g/mol} ≈\approx -1.83 g\text{ g}_

    Your stoichiometric ratio (1 mol metal:2 mol e−1\text{ mol metal} : 2\text{ mol } e^-) and recognition that the anode loses mass were completely correct, but the mass calculation used lead instead of cadmium due to the reversed electrode identification in part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total charge QQ by properly converting current to amperes and time to seconds.

You correctly used Faraday's constant to find the moles of electrons transferred.

You correctly recognized that oxidation at the anode causes an electrode mass loss.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed electrode assignment from reduction potentials

You treated the more negative E∘E^\circ value as having a higher tendency toward reduction rather than oxidation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the thermodynamic meaning of standard reduction potentials (E∘E^\circ). A higher (more positive or less negative) reduction potential means a stronger drive to gain electrons (reduction at the cathode), whereas a lower (more negative) potential indicates a species that is more readily oxidized (anode).

REASONING PATH
Your ACEpath teacher’s suggested approach
Cathode vs. Anode Rule for Voltaic Cells
  • The half-reaction with the more positive (algebraically larger) Ered∘E^\circ_{\text{red}} operates as reduction (Cathode: Red Cat). The half-reaction with the more negative (algebraically smaller) Ered∘E^\circ_{\text{red}} is reversed to run as oxidation (Anode: An Ox).

  • Always compare reduction potentials algebraically: place the higher value at the cathode and reverse the lower value for the anode.

Direction of External Electron Flow
  • Oxidation produces electrons at the anode, and reduction consumes electrons at the cathode. Electrons always flow from the anode to the cathode in the external circuit.

  • Remember alphabetical order: electrons travel from Anode to Cathode (A →\rightarrow C).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the reduction potentials: E∘(Pb2+/Pb)=−0.13 V>E∘(Cd2+/Cd)=−0.40 VE^\circ(\text{Pb}^{2+}/\text{Pb}) = -0.13\text{ V} > E^\circ(\text{Cd}^{2+}/\text{Cd}) = -0.40\text{ V}. Therefore, lead is reduced at the cathode, and cadmium is oxidized at the anode.

  2. Write the anode half-reaction: Cd(s)→Cd2+(aq)+2e−\text{Cd}(s) \rightarrow \text{Cd}^{2+}(aq) + 2e^-.

  3. Convert the transferred electrons to moles of cadmium dissolved: n(Cd)=0.03265 mol e−2=0.01632 moln(\text{Cd}) = \frac{0.03265\text{ mol } e^-}{2} = 0.01632\text{ mol}.

  4. Multiply by the molar mass of cadmium (112.41 g/mol112.41\text{ g/mol}) to find the mass lost by the anode: Δm=−0.01632 mol×112.41 g/mol≈−1.83 g\Delta m = -0.01632\text{ mol} \times 112.41\text{ g/mol} \approx -1.83\text{ g}.

Final answer

(a) Anode: Cd(s)\text{Cd}(s), Cathode: Pb(s)\text{Pb}(s), electrons flow from Cd\text{Cd} to Pb\text{Pb}; (b) The anode loses 1.83 g1.83\text{ g} (Δmanode=−1.83 g\Delta m_{\text{anode}} = -1.83\text{ g}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mnemonic 'An Ox, Red Cat' (Anode = Oxidation, Reduction = Cathode).

  • Practice plotting standard reduction potentials on a vertical number line: the higher half-cell undergoes reduction; the lower half-cell is flipped for oxidation.

  • Rework electrolysis and galvanic mass-change problems by identifying the correct active metal before substituting molar mass.

OverviewACEpath Teacher's Diagnosis

02 The student forgets that the oxidation of cadmium involves two electrons per atom, using a 1:1 mole ratio of electrons to metal.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E∘(Pb2+/Pb)>E∘(Cd2+/Cd)  ⟹  Anode: Cd, Cathode: Pb  ⟹  Electrons flow externally from Cd to Pb.E^\circ(\text{Pb}^{2+}/\text{Pb}) > E^\circ(\text{Cd}^{2+}/\text{Cd}) \implies \text{Anode: } \text{Cd}, \text{ Cathode: } \text{Pb} \implies \text{Electrons flow externally from Cd to Pb.}

  2. Step 2

    t=3.50×3600=12600 s  ⟹  Q=0.250 A×12600 s=3150 C  ⟹  n(e−)=315096485=0.03265 molt = 3.50 \times 3600 = 12600\text{ s} \implies Q = 0.250\text{ A} \times 12600\text{ s} = 3150\text{ C} \implies n(e^-) = \frac{3150}{96485} = 0.03265\text{ mol}

  3. Step 3

    n(Cd)=n(e−)=0.03265 moln(\text{Cd}) = n(e^-) = 0.03265\text{ mol}

    Correct

    n(Cd)=n(e−)2=0.03265 mol2≈0.01632 moln(\text{Cd}) = \frac{n(e^-)}{2} = \frac{0.03265\text{ mol}}{2} \approx 0.01632\text{ mol}

    You set the moles of oxidized cadmium equal to the moles of electrons, but the oxidation half-reaction is Cd(s)→Cd2++2e−\text{Cd}(s) \rightarrow \text{Cd}^{2+} + 2e^-, which requires 2 mol e−2\text{ mol } e^- for every 1 mol1\text{ mol} of Cd\text{Cd}.

  4. Step 4

    Δm=−0.03265 mol×112.41 g/mol=−3.67 g\Delta m = -0.03265\text{ mol} \times 112.41\text{ g/mol} = -3.67\text{ g}

    Correct

    Δm=−(0.01632 mol)(112.41 g/mol)≈−1.83 g\Delta m = -(0.01632\text{ mol})(112.41\text{ g/mol}) \approx -1.83\text{ g}

    Your molar mass multiplication and choice of negative sign for mass loss were mathematically correct, but the numerical result was doubled due to the stoichiometric error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the anode, cathode, and direction of external electron flow from standard reduction potentials.

You accurately converted hours to seconds and calculated the total electric charge transferred.

You correctly used Faraday's constant to find the total moles of electrons.

You recognized that oxidation at the anode causes a decrease in electrode mass and represented this with a negative sign.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric electron ratio omitted

You equated the moles of metal directly to the moles of electrons without dividing by the number of electrons transferred per atom.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the stoichiometric coefficient of electrons (z=2z = 2) in the half-reaction Cd(s)→Cd2++2e−\text{Cd}(s) \rightarrow \text{Cd}^{2+} + 2e^-, treating the redox equivalence as 1:11:1 instead of nmetal=ne−zn_{\text{metal}} = \frac{n_{e^-}}{z}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Write the balanced half-reaction first
  • Every electrodeposition or dissolution calculation depends on the electron coefficient zz from the half-reaction Mz++ze−⇌M(s)\text{M}^{z+} + z e^- \rightleftharpoons \text{M}(s).

  • Always write down the half-reaction explicitly and circle the number of electrons before converting moles of electrons into moles of metal.

Apply stoichiometric conversion factors
  • Moles of metal=n(e−)×(1 mol metalz mol e−)\text{Moles of metal} = n(e^-) \times \left(\frac{1\text{ mol metal}}{z\text{ mol } e^-}\right).

  • Multiply n(e−)n(e^-) by 1z\frac{1}{z} rather than assuming a 1:11:1 ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the anode oxidation half-reaction: Cd(s)→Cd2+(aq)+2e−\text{Cd}(s) \rightarrow \text{Cd}^{2+}(aq) + 2e^-, which shows that z=2 mol e−/mol Cdz = 2\text{ mol } e^- / \text{mol Cd}.

  2. Divide the moles of electrons by 22: n(Cd)=0.03265 mol e−2≈0.016325 moln(\text{Cd}) = \frac{0.03265\text{ mol } e^-}{2} \approx 0.016325\text{ mol}.

  3. Calculate the mass loss of the cadmium anode: Δm=−(0.016325 mol)(112.41 g/mol)≈−1.83 g\Delta m = -(0.016325\text{ mol})(112.41\text{ g/mol}) \approx -1.83\text{ g}.

Final answer

(a) Anode: Cd(s)\text{Cd}(s), Cathode: Pb(s)\text{Pb}(s), electrons flow externally from the Cd\text{Cd} electrode to the Pb\text{Pb} electrode; (b) Δmanode=−1.83 g\Delta m_{\text{anode}} = -1.83\text{ g} (a loss of 1.83 g1.83\text{ g}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Write the balanced half-cell reaction at the start of any Faraday's law problem to clearly identify zz.

  • Use dimensional analysis with units like 1 mol metalz mol e−\frac{1\text{ mol metal}}{z\text{ mol } e^-} to prevent dropping the electron coefficient.

OverviewACEpath Teacher's Diagnosis

03 The student fails to convert the time from hours to seconds when calculating total charge.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E∘(Pb2+/Pb)=−0.13 V>−0.40 V  ⟹  reduction at Pb  ⟹  Anode: Cd, Cathode: Pb, Electrons flow externally from Cd anode to Pb cathode.E^\circ(\text{Pb}^{2+}/\text{Pb}) = -0.13\text{ V} > -0.40\text{ V} \implies \text{reduction at Pb} \implies \text{Anode: Cd, Cathode: Pb, Electrons flow externally from Cd anode to Pb cathode.}

  2. Step 2

    Q=I×t=0.250 A×3.50 h=0.875 CQ = I \times t = 0.250\text{ A} \times 3.50\text{ h} = 0.875\text{ C}

    Correct

    Q=I⋅t=0.250 A×(3.50×3600 s)=3150 CQ = I \cdot t = 0.250\text{ A} \times (3.50 \times 3600\text{ s}) = 3150\text{ C}

    A coulomb is defined as an ampere-second (1 C=1 A⋅s1\text{ C} = 1\text{ A}\cdot\text{s}). You must convert time from hours to seconds by multiplying by 3600 s/h3600\text{ s/h} before multiplying by current in amperes.

  3. Step 3

    n(e−)=0.87596,485=9.07×10−6 mol  ⟹  n(Cd)=9.07×10−62=4.53×10−6 moln(e^-) = \frac{0.875}{96,485} = 9.07 \times 10^{-6}\text{ mol} \implies n(\text{Cd}) = \frac{9.07 \times 10^{-6}}{2} = 4.53 \times 10^{-6}\text{ mol}

    Correct

    n(e−)=3150 C96,485 C/mol≈0.03265 mol  ⟹  n(Cd)=0.03265 mol2≈0.01632 moln(e^-) = \frac{3150\text{ C}}{96,485\text{ C/mol}} \approx 0.03265\text{ mol} \implies n(\text{Cd}) = \frac{0.03265\text{ mol}}{2} \approx 0.01632\text{ mol}

    Your formula and stoichiometric ratio of 2 mol e−2\text{ mol } e^- per 1 mol Cd1\text{ mol Cd} were completely correct, but the numerical result was affected by the earlier unconverted charge value.

  4. Step 4

    Mass change=−4.53×10−6 mol×112.41 g/mol=−5.10×10−4 g\text{Mass change} = -4.53 \times 10^{-6}\text{ mol} \times 112.41\text{ g/mol} = -5.10 \times 10^{-4}\text{ g}

    Correct

    Δmanode=−0.01632 mol×112.41 g/mol≈−1.83 g\Delta m_{\text{anode}} = -0.01632\text{ mol} \times 112.41\text{ g/mol} \approx -1.83\text{ g}

    You correctly recognized that the anode loses mass due to oxidation and properly multiplied by cadmium's molar mass, but the numerical value inherits the time-unit error from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the half-cell with the more positive reduction potential undergoes reduction at the cathode.

You correctly stated that electrons flow through the external circuit from the anode to the cathode.

You correctly applied Faraday's constant and the 1:21:2 mole ratio between oxidized metal and transferred electrons.

You correctly assigned a negative sign to represent the mass loss of the anode.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of SI unit conversion for time in charge calculation

You entered time directly as 3.50 h3.50\text{ h} instead of converting it to 12,600 s12,600\text{ s} when evaluating Q=I⋅tQ = I \cdot t.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating time units in dimensional analysis: electrical charge defined by Q=I⋅tQ = I \cdot t requires SI base units (current in amperes and time in seconds) to yield coulombs.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency for Charge ($Q$)
  • 1 C=1 A⋅1 s1\text{ C} = 1\text{ A} \cdot 1\text{ s}. Time must always be in seconds when calculating charge in coulombs.

  • Check that time values given in minutes or hours are explicitly converted (t=hours×3600 s/ht = \text{hours} \times 3600\text{ s/h}) before multiplying by current in amperes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the time to seconds: t=3.50 h×3600 s/h=12,600 st = 3.50\text{ h} \times 3600\text{ s/h} = 12{,}600\text{ s}.

  2. Calculate total charge: Q=0.250 A×12,600 s=3150 CQ = 0.250\text{ A} \times 12{,}600\text{ s} = 3150\text{ C}.

  3. Determine moles of transferred electrons: n(e−)=3150 C96,485 C/mol≈0.03265 moln(e^-) = \frac{3150\text{ C}}{96{,}485\text{ C/mol}} \approx 0.03265\text{ mol}.

  4. Calculate moles of cadmium dissolved: n(Cd)=0.03265 mol2≈0.01632 moln(\text{Cd}) = \frac{0.03265\text{ mol}}{2} \approx 0.01632\text{ mol}.

  5. Calculate the mass change of the anode: Δm=−0.01632 mol×112.41 g/mol≈−1.83 g\Delta m = -0.01632\text{ mol} \times 112.41\text{ g/mol} \approx -1.83\text{ g}.

Final answer

(a) Anode: Cd(s)\text{Cd}(s), Cathode: Pb(s)\text{Pb}(s), electrons flow externally from Cd\text{Cd} to Pb\text{Pb}; (b) The anode loses 1.83 g1.83\text{ g} of mass (Δmanode=−1.83 g\Delta m_{\text{anode}} = -1.83\text{ g}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out explicit units during dimensional analysis so that hours visibly cancel out: A⋅(h×3600 s/h)=A⋅s=C\text{A} \cdot (\text{h} \times 3600\text{ s/h}) = \text{A}\cdot\text{s} = \text{C}.

  • Double-check that physical quantities like current (convert mA\text{mA} to A\text{A}) and time (convert min\text{min} or h\text{h} to s\text{s}) are in base SI units before using physical constants like Faraday's constant.

Lock it in

Similar question

01

A galvanic cell consists of a chromium half-cell (Cr3++3e−→Cr\text{Cr}^{3+} + 3e^- \rightarrow \text{Cr}, E∘=−0.74 VE^\circ = -0.74\text{ V}) and a tin half-cell (Sn2++2e−→Sn\text{Sn}^{2+} + 2e^- \rightarrow \text{Sn}, E∘=−0.14 VE^\circ = -0.14\text{ V}). Identify the anode and cathode, and write the direction of external electron flow.

Answer

Anode: Cr(s)\text{Cr}(s), Cathode: Sn(s)\text{Sn}(s), electrons flow externally from Cr\text{Cr} to Sn\text{Sn}. (Because −0.14 V>−0.74 V-0.14\text{ V} > -0.74\text{ V}, Sn2+\text{Sn}^{2+} is reduced at the cathode and Cr\text{Cr} is oxidized at the anode).

02

A galvanic cell couples an iron electrode in Fe2+\text{Fe}^{2+} (E∘=−0.44 VE^\circ = -0.44\text{ V}) with a copper electrode in Cu2+\text{Cu}^{2+} (E∘=+0.34 VE^\circ = +0.34\text{ V}). A steady current of 0.500 A0.500\text{ A} runs for 1.00 hour1.00\text{ hour}. Calculate the mass change of the anode (F=96,485 C/molF = 96{,}485\text{ C/mol}, molar mass of Fe=55.85 g/mol\text{Fe} = 55.85\text{ g/mol}, Cu=63.55 g/mol\text{Cu} = 63.55\text{ g/mol}).

Answer

Mass loss of 0.521 g0.521\text{ g} (Δm=−0.521 g\Delta m = -0.521\text{ g}). Iron is the anode because −0.44 V<+0.34 V-0.44\text{ V} < +0.34\text{ V}. Q=(0.500 A)(3600 s)=1800 CQ = (0.500\text{ A})(3600\text{ s}) = 1800\text{ C}; n(e−)=1800/96,485≈0.01866 moln(e^-) = 1800 / 96{,}485 \approx 0.01866\text{ mol}; n(Fe)=n(e−)/2≈0.009328 moln(\text{Fe}) = n(e^-)/2 \approx 0.009328\text{ mol}; Δm=−0.009328 mol×55.85 g/mol≈−0.521 g\Delta m = -0.009328\text{ mol} \times 55.85\text{ g/mol} \approx -0.521\text{ g}.

03

A cell made of a silver half-cell (Ag++e−→Ag\text{Ag}^+ + e^- \rightarrow \text{Ag}, E∘=+0.80 VE^\circ = +0.80\text{ V}) and an aluminum half-cell (Al3++3e−→Al\text{Al}^{3+} + 3e^- \rightarrow \text{Al}, E∘=−1.66 VE^\circ = -1.66\text{ V}) operates until 0.270 g0.270\text{ g} of the anode is dissolved. What mass of metal deposits on the cathode? (Molar masses: Al=26.98 g/mol\text{Al} = 26.98\text{ g/mol}, Ag=107.87 g/mol\text{Ag} = 107.87\text{ g/mol})

Answer

3.24 g3.24\text{ g} of Ag\text{Ag} deposits. Aluminum is the anode (−1.66 V<+0.80 V-1.66\text{ V} < +0.80\text{ V}) and silver is the cathode. n(Al)=0.270/26.98=0.0100 moln(\text{Al}) = 0.270 / 26.98 = 0.0100\text{ mol}. Each Al\text{Al} oxidized releases 3e−3e^-, so n(e−)=0.0300 moln(e^-) = 0.0300\text{ mol}. At the cathode, Ag++e−→Ag\text{Ag}^+ + e^- \rightarrow \text{Ag}, so n(Ag)=0.0300 moln(\text{Ag}) = 0.0300\text{ mol}. Mass of Ag=0.0300 mol×107.87 g/mol≈3.24 g\text{Ag} = 0.0300\text{ mol} \times 107.87\text{ g/mol} \approx 3.24\text{ g}.

Loading workspace…