Resources

An induced nuclear process involves bombarding a heavy actinide isotope with a thermal neutron, resulting in fission into 54140Xe^{140}_{54}\text{Xe}, an unknown nuclide ZAX^{A}_{Z}\text{X}, and 44 free neutrons: Z0A0Target+01n→54140Xe+ZAX+4 01n^{A_0}_{Z_0}\text{Target} + ^{1}_{0}\text{n} \rightarrow ^{140}_{54}\text{Xe} + ^{A}_{Z}\text{X} + 4\,^{1}_{0}\text{n}. If the unknown fission product is identified as strontium-96 (3896Sr^{96}_{38}\text{Sr}), reverse engineer the reaction to identify: (a) the atomic number Z0Z_0, mass number A0A_0, and elemental identity of the initial heavy target nucleus, and (b) whether this reaction type corresponds to fission or fusion.

Answer and steps

Final answer

(a) Z0=92Z_0 = 92, A0=239A_0 = 239, so the target nucleus is uranium-239 (92239U^{239}_{92}\text{U}). (b) The process is nuclear fission.

Steps

01

Write the balanced nuclear equation

Substitute the known fission product, strontium-96 (3896Sr^{96}_{38}\ce{Sr}), into the given equation:

Z0A0Target+01n→54140Xe+3896Sr+4 01n^{A_0}_{Z_0}\ce{Target} + {^{1}_{0}\ce{n}} \rightarrow {^{140}_{54}\ce{Xe}} + {^{96}_{38}\ce{Sr}} + 4\,{^{1}_{0}\ce{n}}

In every nuclear reaction, two fundamental conservation laws must hold:

  1. Conservation of mass number (AA): The total number of nucleons (protons + neutrons) on the reactant side equals the total number on the product side.
  2. Conservation of atomic number (ZZ): The total nuclear charge (number of protons) on the reactant side equals the total nuclear charge on the product side.

02

Determine the mass number (A0A_0)

Equate the sum of mass numbers from the left side to the sum from the right side:

A0+1=140+96+4(1)A_0 + 1 = 140 + 96 + 4(1)

A0+1=240A_0 + 1 = 240

A0=240−1=239A_0 = 240 - 1 = 239

Common Pitfall: Remember to multiply the mass number of the free neutron (A=1A=1) by its stoichiometric coefficient (44). Omitting this coefficient is a frequent source of calculation error.


03

Determine the atomic number (Z0Z_0) and identify the element

Equate the sum of atomic numbers from the left side to the sum from the right side:

Z0+0=54+38+4(0)Z_0 + 0 = 54 + 38 + 4(0)

Z0=54+38=92Z_0 = 54 + 38 = 92

Using the periodic table, the element with atomic number Z=92Z = 92 is uranium (U\ce{U}).

Therefore, the initial heavy target nucleus is uranium-239 (92239U^{239}_{92}\ce{U}).


04

Classify the reaction as fission or fusion

  • Nuclear fission is the process in which a heavy, unstable nucleus captures a particle (such as a thermal neutron) and splits into two lighter nuclei of intermediate mass, releasing free neutrons and energy.
  • Nuclear fusion is the process in which two light atomic nuclei combine to form a single, heavier nucleus.

Because a heavy actinide nucleus (92239U^{239}_{92}\ce{U}) absorbs a neutron and splits into two smaller nuclei (54140Xe^{140}_{54}\ce{Xe} and 3896Sr^{96}_{38}\ce{Sr}), this reaction is an example of nuclear fission.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to account for the single incident neutron on the reactant side when applying mass conservation, resulting in an overstated mass number of 240.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Z0+0=54+38+0  ⟹  Z0=92Z_0 + 0 = 54 + 38 + 0 \implies Z_0 = 92, element is U\ce{U}

  2. Step 2

    A0=140+96+4(1)  ⟹  A0=240A_0 = 140 + 96 + 4(1) \implies A_0 = 240

    Correct

    A0+1=140+96+4(1)  ⟹  A0+1=240  ⟹  A0=239A_0 + 1 = 140 + 96 + 4(1) \implies A_0 + 1 = 240 \implies A_0 = 239

    You forgot to include the mass number of the bombarding thermal neutron (+1+1) on the reactant side of the equation.

  3. Step 3

    Target is 92240U^{240}_{92}\ce{U}

    Correct

    Target is 92239U^{239}_{92}\ce{U}

    Your final isotope identification was affected by the mass number error from Step 2.

  4. Step 4

    A heavy actinide nucleus absorbs a neutron and splits into two lighter fragments, so the reaction is nuclear fission.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly balanced atomic numbers to find Z0=92Z_0 = 92 and matched it to uranium.

You correctly accounted for the stoichiometric coefficient of the four product neutrons on the right-hand side.

You clearly explained the physical definition of nuclear fission and correctly classified the reaction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Reactant Particle in Conservation Equation

You equated A0A_0 directly to the product nucleon sum instead of writing A0+1A_0 + 1, leaving off the incident neutron on the left side.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Focusing on the target nucleus as the sole reactant variable led you to treat the right side sum as A0A_0 directly, neglecting the incoming projectile's contribution to total reactant nucleon count.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for Both Sides of the Nuclear Reaction
  • In nuclear equations, ∑Areactants=∑Aproducts\sum A_{\text{reactants}} = \sum A_{\text{products}} and ∑Zreactants=∑Zproducts\sum Z_{\text{reactants}} = \sum Z_{\text{products}}.

  • Before simplifying, write out every term on both sides explicitly, including the projectile: Atarget+Aprojectile=∑AproductsA_{\text{target}} + A_{\text{projectile}} = \sum A_{\text{products}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the total mass balance including the incident neutron: A0+1=140+96+4(1)A_0 + 1 = 140 + 96 + 4(1).

  2. Simplify the right-hand side: 140+96+4=240140 + 96 + 4 = 240.

  3. Subtract 11 from both sides: A0=240−1=239A_0 = 240 - 1 = 239.

Final answer

(a) Z0=92Z_0 = 92, A0=239A_0 = 239, target nucleus is 92239U^{239}_{92}\ce{U}; (b) nuclear fission.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the complete reactant side (A0+1A_0 + 1) before performing any arithmetic.

  • Do a quick sanity check by verifying that the total mass numbers on the left (239+1=240239 + 1 = 240) and right (140+96+4=240140 + 96 + 4 = 240) match.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to multiply the mass of the emitted free neutrons by their coefficient of 4, calculating A₀ as 236 instead of 239.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Z0+0=54+38+0  ⟹  Z0=92Z_0 + 0 = 54 + 38 + 0 \implies Z_0 = 92, element is U\text{U}

  2. Step 2

    A0+1=140+96+1  ⟹  A0=237−1=236A_0 + 1 = 140 + 96 + 1 \implies A_0 = 237 - 1 = 236

    Correct

    A0+1=140+96+4(1)  ⟹  A0+1=240  ⟹  A0=239A_0 + 1 = 140 + 96 + 4(1) \implies A_0 + 1 = 240 \implies A_0 = 239

    When balancing mass numbers, each of the 44 emitted neutrons contributes 11 nucleon, giving 4×1=44 \times 1 = 4 total mass units on the product side rather than just 11.

  3. Step 3

    Target is 92236U^{236}_{92}\text{U}

    Correct

    Target is 92239U^{239}_{92}\text{U}

    Your isotope symbol followed directly from your calculated mass number in Step 2; using the correct mass number gives 92239U^{239}_{92}\text{U}.

  4. Step 4

    The process is nuclear fission because a large nucleus splits into two smaller nuclei.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly conserved atomic number to find Z0=92Z_0 = 92 and identified the element as uranium.

You correctly classified the reaction as induced nuclear fission based on a heavy nucleus splitting into two lighter nuclei.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Coefficient Omission

You wrote +1+ 1 instead of +4(1)+ 4(1) for the mass contribution of the product neutrons.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking stoichiometric multipliers when setting up algebraic conservation balances for nuclear equations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for Multipliers in Nuclear Balancing
  • For any particle term c ZAXc\,^{A}_{Z}\text{X} in a nuclear equation, the total mass contribution is c×Ac \times A and the total charge contribution is c×Zc \times Z.

  • Always circle stoichiometric coefficients in front of free particles before writing down the conservation equations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Sum the mass numbers on the product side: 140+96+4(1)=240140 + 96 + 4(1) = 240.

  2. Equate with the reactant side: A0+1=240A_0 + 1 = 240.

  3. Solve for the initial mass number: A0=239A_0 = 239.

Final answer

(a) Z0=92Z_0 = 92, A0=239A_0 = 239, and the target nucleus is 92239U^{239}_{92}\text{U}. (b) The reaction is nuclear fission.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check every particle with a coefficient greater than 11 to ensure you multiply both its mass number and atomic number when balancing.

  • Practice balancing nuclear fission equations involving multiple emitted neutrons.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly assumes that an induced reaction initiated by adding a neutron constitutes nuclear fusion because two particles combine on the reactant side.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Z0+0=54+38+0  ⟹  Z0=92Z_0 + 0 = 54 + 38 + 0 \implies Z_0 = 92, element is U\text{U}

  2. Step 2

    A0+1=140+96+4(1)  ⟹  A0=240−1=239  ⟹  Target is 92239UA_0 + 1 = 140 + 96 + 4(1) \implies A_0 = 240 - 1 = 239 \implies \text{Target is } ^{239}_{92}\text{U}

  3. Step 3

    The reaction combines a neutron with a target nucleus to start the process, so it is nuclear fusion.

    Correct

    Nuclear fission

    Capturing a neutron initiates the reaction, but the overall transformation splits a single heavy actinide nucleus into two medium-mass nuclei (54140Xe^{140}_{54}\text{Xe} and 3896Sr^{96}_{38}\text{Sr}), which defines nuclear fission.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly balanced the atomic numbers across the nuclear equation.

You accounted for the four emitted neutrons when balancing the mass numbers.

You correctly identified the target nucleus as uranium-239.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Concept confusion: Fission vs. Fusion

No calculation slip was made; your algebraic balancing was completely accurate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You focused on the initial collision step (a neutron joining the target nucleus) rather than the overall nuclear transformation. In nuclear chemistry, nuclear fission is characterized by a heavy nucleus splitting into smaller fragment nuclei, whereas nuclear fusion requires two light atomic nuclei combining into a single, heavier nucleus.

REASONING PATH
Your ACEpath teacher’s suggested approach
Classify Overall Outcome, Not Incident Particles
  • Fission splits a heavy nucleus (A≳230A \gtrsim 230) into two medium-sized daughter nuclei; fusion joins two light nuclei (A≲20A \lesssim 20, such as isotopes of hydrogen or helium) into a heavier product.

  • Compare the initial heavy target nucleus to the main product nuclei. Since one heavy nucleus splits into two intermediate nuclei, classify it as fission.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Inspect the main product nuclei: 54140Xe^{140}_{54}\text{Xe} and 3896Sr^{96}_{38}\text{Sr}.

  2. Recognize that a heavy actinide nucleus (A=239A=239) splits into two lighter fragments of intermediate mass.

  3. Conclude that a heavy nucleus splitting into smaller nuclei after neutron capture is induced nuclear fission.

Final answer

(a) Z0=92Z_0 = 92, A0=239A_0 = 239, so the target nucleus is uranium-239 (92239U^{239}_{92}\text{U}). (b) The process is nuclear fission.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental definitions: fission involves splitting heavy nuclei, while fusion involves uniting light nuclei.

  • Practice distinguishing induced fission reactions (neutron + heavy nucleus →\rightarrow fragments + neutrons) from fusion reactions (light nuclei combining under extreme temperature and pressure).

Lock it in

Similar question

01

A thermal neutron induces fission in an unknown actinide target: 92AU+01n→3692Kr+56141Ba+3 01n^{A}_{92}\ce{U} + {^{1}_{0}\ce{n}} \rightarrow {^{92}_{36}\ce{Kr}} + {^{141}_{56}\ce{Ba}} + 3\,{^{1}_{0}\ce{n}}. Determine the mass number AA of the target uranium isotope.

Answer

A=235A = 235. Key steps: Set up mass balance A+1=92+141+3(1)=236A + 1 = 92 + 141 + 3(1) = 236, so A=236−1=235A = 236 - 1 = 235.

02

An alpha particle bombards an aluminum target in an artificial transmutation reaction: 1327Al+24α→ZAP+01n^{27}_{13}\ce{Al} + {^{4}_{2}\alpha} \rightarrow {^{A}_{Z}\ce{P}} + {^{1}_{0}\ce{n}}. Determine the values of AA and ZZ for the resulting phosphorus isotope, and classify whether this reaction is fission, fusion, or transmutation.

Answer

A=30A = 30, Z=15Z = 15; artificial transmutation (induced nuclear reaction). Key steps: 27+4=A+1  ⟹  A=3027 + 4 = A + 1 \implies A = 30; 13+2=Z+0  ⟹  Z=1513 + 2 = Z + 0 \implies Z = 15.

03

A neutron-induced fission of plutonium-239 absorbs one neutron and produces cerium-144 (58144Ce^{144}_{58}\ce{Ce}), an unknown isotope ZAY^{A}_{Z}\ce{Y}, and two neutrons: 94239Pu+01n→58144Ce+ZAY+2 01n^{239}_{94}\ce{Pu} + {^{1}_{0}\ce{n}} \rightarrow {^{144}_{58}\ce{Ce}} + {^{A}_{Z}\ce{Y}} + 2\,{^{1}_{0}\ce{n}}. Identify AA, ZZ, and the element symbol of isotope Y\ce{Y}.

Answer

3694Kr^{94}_{36}\ce{Kr} (A=94A = 94, Z=36Z = 36, Krypton). Key steps: Mass balance is 239+1=144+A+2(1)  ⟹  240=146+A  ⟹  A=94239 + 1 = 144 + A + 2(1) \implies 240 = 146 + A \implies A = 94. Charge balance is 94+0=58+Z+2(0)  ⟹  Z=3694 + 0 = 58 + Z + 2(0) \implies Z = 36.

Loading workspace…