Resources

A chemistry student measures a 45.0 g45.0\text{ g} sample of solid water (ice) at its normal melting point of 0.0∘C0.0^\circ\text{C} in an insulated calorimeter. Calculate the quantity of heat energy, in kilojoules (kJ\text{kJ}), required to completely melt the entire ice sample into liquid water at 0.0∘C0.0^\circ\text{C}. The enthalpy of fusion for water is ΔHfus=334 J/g\Delta H_{\text{fus}} = 334\text{ J/g}.

Answer and steps

Final answer

15.0 kJ15.0\text{ kJ}

Steps

Step 1: Identify the Phase Change and Relevant Formula

The sample undergoes a phase change from solid ice to liquid water at a constant temperature of 0.0∘C0.0^\circ\text{C} (its melting point). Because there is no change in temperature, the formula q=mcΔTq = mc\Delta T does not apply. Instead, the heat energy required for melting is directly proportional to the mass and the specific enthalpy of fusion:

q=m⋅ΔHfusq = m \cdot \Delta H_{\text{fus}}

where:

  • qq is the heat absorbed (in J\text{J}),
  • m=45.0 gm = 45.0\text{ g} is the mass of the ice,
  • ΔHfus=334 J/g\Delta H_{\text{fus}} = 334\text{ J/g} is the enthalpy of fusion of water.

Step 2: Calculate the Heat Energy in Joules

Substitute the given quantities into the equation:

q=(45.0 g)⋅(334 J/g)q = (45.0\text{ g}) \cdot (334\text{ J/g})

q=15030 Jq = 15030\text{ J}


Step 3: Convert Joules to Kilojoules and Apply Significant Figures

The question asks for the answer in kilojoules (kJ\text{kJ}). Use the conversion factor 1 kJ=1000 J1\text{ kJ} = 1000\text{ J}:

q=15030 J1000 J/kJ=15.03 kJq = \frac{15030\text{ J}}{1000\text{ J/kJ}} = 15.03\text{ kJ}

Both given values (45.0 g45.0\text{ g} and 334 J/g334\text{ J/g}) have three significant figures. Rounding the result to three significant figures yields:

q=15.0 kJq = 15.0\text{ kJ}


Common Pitfall to Avoid

  • Using q=mcΔTq = mc\Delta T: During a phase change, energy goes toward overcoming intermolecular forces rather than increasing the kinetic energy of the molecules. Therefore, ΔT=0\Delta T = 0, and using a specific heat capacity equation will incorrectly yield 0 J0\text{ J}. Always use q=mΔHq = m\Delta H for melting, freezing, boiling, or condensing.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the heat energy correctly in joules using q = m · ΔHfus but forgets to convert the final answer to kilojoules.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    q=m⋅ΔHfus  ⟹  q=45.0 g⋅334 J/g  ⟹  q=15030 Jq = m \cdot \Delta H_{\text{fus}} \implies q = 45.0\text{ g} \cdot 334\text{ J/g} \implies q = 15030\text{ J}

  2. Step 2

    q=15030 Jq = 15030\text{ J}

    Correct

    q=15030 J1000 J/kJ=15.03 kJ≈15.0 kJq = \frac{15030\text{ J}}{1000\text{ J/kJ}} = 15.03\text{ kJ} \approx 15.0\text{ kJ}

    The problem asks for the quantity of heat in kilojoules (kJ\text{kJ}). You left your final answer in joules (J\text{J}) without dividing by 1000 J/kJ1000\text{ J/kJ} or rounding to three significant figures.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that a phase change at constant temperature requires the latent heat of fusion rather than a temperature change formula.

You accurately substituted the given mass and enthalpy of fusion to determine the energy in joules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit conversion

You stopped after computing q=15030 Jq = 15030\text{ J} and did not convert the energy into kilojoules.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking target units specified in the question stem when the equation naturally outputs base units (joules from grams and J/g\text{J/g}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Target Unit Check
  • Always circle or highlight the requested unit in the prompt before starting calculations.

  • Check whether the question requests J\text{J} or kJ\text{kJ} before boxing your final answer.

Metric Prefix Conversion
  • 1 kJ=1000 J1\text{ kJ} = 1000\text{ J}, so dividing joules by 10001000 yields kilojoules.

  • Divide your value in joules by 10001000 whenever an answer requires kilojoules.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert joules to kilojoules using the conversion factor 1 kJ1000 J\frac{1\text{ kJ}}{1000\text{ J}}: q=15030 J1000 J/kJ=15.03 kJq = \frac{15030\text{ J}}{1000\text{ J/kJ}} = 15.03\text{ kJ}.

  2. Round to three significant figures to match the given values (45.0 g45.0\text{ g} and 334 J/g334\text{ J/g}).

Final answer

15.0 kJ15.0\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read the question stem before finalizing your answer to verify that your units match what was requested.

  • Practice converting between joules and kilojoules routinely in thermochemistry problems.

OverviewACEpath Teacher's Diagnosis

02 The student divides the mass by the enthalpy of fusion instead of multiplying, leading to an incorrect heat value of 0.135 J (or 0.000135 kJ).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q=mΔHfus  ⟹  q=45.0334=0.135 Jq = \frac{m}{\Delta H_{\text{fus}}} \implies q = \frac{45.0}{334} = 0.135\text{ J}

    Correct

    q=m⋅ΔHfus=(45.0 g)(334 J/g)=15030 Jq = m \cdot \Delta H_{\text{fus}} = (45.0\text{ g})(334\text{ J/g}) = 15030\text{ J}

    To find total heat absorbed during a phase change, multiply the mass by the specific heat of fusion (q=m⋅ΔHfusq = m \cdot \Delta H_{\text{fus}}), rather than dividing.

  2. Step 2

    q=0.000135 kJq = 0.000135\text{ kJ}

    Correct

    q=15030 J1000 J/kJ=15.0 kJq = \frac{15030\text{ J}}{1000\text{ J/kJ}} = 15.0\text{ kJ}

    You correctly divided by 10001000 to convert joules to kilojoules, but the final value was affected by dividing in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that this constant-temperature phase change requires the enthalpy of fusion rather than a temperature change equation.

You successfully converted your calculated value from joules to kilojoules by dividing by 10001000.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion / dimensional inconsistency

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the relationship between mass, heat, and enthalpy of fusion, setting q=mΔHfusq = \frac{m}{\Delta H_{\text{fus}}} instead of q=m⋅ΔHfusq = m \cdot \Delta H_{\text{fus}}, which yields units of g2/J\text{g}^2/\text{J} rather than energy in joules (J\text{J}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis for Heat of Phase Change
  • Heat (J)=mass (g)×enthalpy of fusion (J/g)\text{Heat (J)} = \text{mass (g)} \times \text{enthalpy of fusion (J/g)} cancels grams to yield joules.

  • Check your units before calculating: g×Jg=J\text{g} \times \frac{\text{J}}{\text{g}} = \text{J}. If you divide, you get gJ/g=g2J\frac{\text{g}}{\text{J/g}} = \frac{\text{g}^2}{\text{J}}, which is not a unit of energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. q=m⋅ΔHfusq = m \cdot \Delta H_{\text{fus}}

  2. q=(45.0 g)⋅(334 J/g)=15030 Jq = (45.0\text{ g}) \cdot (334\text{ J/g}) = 15030\text{ J}

  3. q=15030 J1000 J/kJ=15.03 kJ≈15.0 kJq = \frac{15030\text{ J}}{1000\text{ J/kJ}} = 15.03\text{ kJ} \approx 15.0\text{ kJ}

Final answer

15.0 kJ15.0\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the units alongside your numbers to verify that grams cancel and leave joules.

  • Practice distinguishing when to multiply by ΔH\Delta H (to find total heat qq) versus when to divide by mass or ΔH\Delta H (when solving for mm or ΔH\Delta H).

OverviewACEpath Teacher's Diagnosis

03 The student attempts to use the temperature-change formula q = m · c · ΔT, but since the temperature remains at 0.0°C (ΔT = 0), concludes that no heat is required.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q=m⋅c⋅ΔTq = m \cdot c \cdot \Delta T

    Correct

    q=m⋅ΔHfusq = m \cdot \Delta H_{\text{fus}}

    During a phase change such as melting, temperature remains constant while energy is absorbed to disrupt intermolecular hydrogen bonds, so heat must be calculated using latent heat of fusion rather than specific heat capacity.

  2. Step 2

    ΔT=0.0∘C−0.0∘C=0∘C\Delta T = 0.0^\circ\text{C} - 0.0^\circ\text{C} = 0^\circ\text{C}

    Correct

    q=(45.0 g)(334 J/g)=15030 Jq = (45.0\text{ g})(334\text{ J/g}) = 15030\text{ J}

    You correctly noted that the temperature difference is zero, but since the formula chosen in Step 1 requires a temperature change, evaluating ΔT=0∘C\Delta T = 0^\circ\text{C} leads to zero heat energy.

  3. Step 3

    q=0 kJq = 0\text{ kJ}

    Correct

    q=15030 J1000 J/kJ≈15.0 kJq = \frac{15030\text{ J}}{1000\text{ J/kJ}} \approx 15.0\text{ kJ}

    This conclusion follows directly from evaluating q=mc(0)q = mc(0), but melting ice requires an input of latent heat.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the ice sample remains at a constant temperature of 0.0∘C0.0^\circ\text{C} throughout the melting process.

You included the appropriate unit of kilojoules (kJ\text{kJ}) for your final heat value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Selection Error (Sensible Heat vs. Latent Heat)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that all heat transfer requires a temperature change and used q=mcΔTq = mc\Delta T, overlooking that phase changes occur isothermally and require latent heat (q=mΔHq = m\Delta H) to overcome intermolecular attractions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify whether temperature changes or a phase change occurs
  • If temperature changes within a single state of matter, use q=mcΔTq = mc\Delta T. If a substance is melting, freezing, boiling, or condensing at constant temperature, use q=mΔHq = m\Delta H.

  • Check if the substance changes physical state; if it does at constant temperature, use q=mΔHfusq = m\Delta H_{\text{fus}} or q=mΔHvapq = m\Delta H_{\text{vap}}.

Convert energy units when requested
  • Specific heat and enthalpy constants are often provided in joules (J\text{J} or J/g\text{J/g}), but final answers may require kilojoules (kJ\text{kJ}).

  • Divide the calculated energy in joules by 10001000 to report the value in kilojoules.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that solid ice is melting into liquid water at constant temperature, requiring the heat of fusion equation: q=m⋅ΔHfusq = m \cdot \Delta H_{\text{fus}}.

  2. Substitute the given mass and enthalpy of fusion: q=(45.0 g)(334 J/g)=15030 Jq = (45.0\text{ g})(334\text{ J/g}) = 15030\text{ J}.

  3. Convert joules to kilojoules: q=15030 J1000 J/kJ=15.03 kJq = \frac{15030\text{ J}}{1000\text{ J/kJ}} = 15.03\text{ kJ}.

  4. Round to three significant figures to match the given data: 15.0 kJ15.0\text{ kJ}.

Final answer

15.0 kJ15.0\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the heating/cooling curve for water to visually distinguish between temperature-change regions (slanted lines, q=mcΔTq = mc\Delta T) and phase-change plateaus (flat lines, q=mΔHq = m\Delta H).

  • Practice identifying key terms like 'melts', 'freezes', 'boils', or 'condenses' as triggers to use q=mΔHq = m\Delta H.

Lock it in

Similar question

01

Calculate the heat energy, in kilojoules (kJ\text{kJ}), required to melt a 25.0 g25.0\text{ g} block of ice at 0.0∘C0.0^\circ\text{C}. The enthalpy of fusion for water is ΔHfus=334 J/g\Delta H_{\text{fus}} = 334\text{ J/g}.

Answer

8.35 kJ8.35\text{ kJ}. Key steps: q=m⋅ΔHfus=(25.0 g)(334 J/g)=8350 Jq = m \cdot \Delta H_{\text{fus}} = (25.0\text{ g})(334\text{ J/g}) = 8350\text{ J}. Convert to kilojoules: 8350 J1000 J/kJ=8.35 kJ\frac{8350\text{ J}}{1000\text{ J/kJ}} = 8.35\text{ kJ}.

02

A sample of liquid water at 100.0∘C100.0^\circ\text{C} absorbs 67.8 kJ67.8\text{ kJ} of energy to completely vaporize into steam at 100.0∘C100.0^\circ\text{C}. If the enthalpy of vaporization of water is ΔHvap=2260 J/g\Delta H_{\text{vap}} = 2260\text{ J/g}, determine the mass of the water sample in grams.

Answer

30.0 g30.0\text{ g}. Key steps: Convert energy to joules: 67.8 kJ×1000 J/kJ=67800 J67.8\text{ kJ} \times 1000\text{ J/kJ} = 67800\text{ J}. Rearrange q=m⋅ΔHvapq = m \cdot \Delta H_{\text{vap}} to solve for mass: m=qΔHvap=67800 J2260 J/g=30.0 gm = \frac{q}{\Delta H_{\text{vap}}} = \frac{67800\text{ J}}{2260\text{ J/g}} = 30.0\text{ g}.

03

How much total heat in kilojoules (kJ\text{kJ}) is needed to take a 10.0 g10.0\text{ g} block of ice at −10.0∘C-10.0^\circ\text{C} and completely melt it into liquid water at 0.0∘C0.0^\circ\text{C}? (cice=2.09 J/(g⋅∘C)c_{\text{ice}} = 2.09\text{ J/(g}\cdot^\circ\text{C)}, ΔHfus=334 J/g\Delta H_{\text{fus}} = 334\text{ J/g})

Answer

3.55 kJ3.55\text{ kJ}. Key steps: Step 1 (warming ice): q1=mcΔT=(10.0 g)(2.09 J/g⋅∘C)(10.0∘C)=209 Jq_1 = mc\Delta T = (10.0\text{ g})(2.09\text{ J/g}\cdot^\circ\text{C})(10.0^\circ\text{C}) = 209\text{ J}. Step 2 (melting ice): q2=mΔHfus=(10.0 g)(334 J/g)=3340 Jq_2 = m\Delta H_{\text{fus}} = (10.0\text{ g})(334\text{ J/g}) = 3340\text{ J}. Total heat: qtotal=209 J+3340 J=3549 J=3.55 kJq_{\text{total}} = 209\text{ J} + 3340\text{ J} = 3549\text{ J} = 3.55\text{ kJ}.

Loading workspace…