Resources

A student dissolves 0.0500 mol0.0500\text{ mol} of sodium carbonate (Na2CO3\text{Na}_2\text{CO}_3) and 0.0300 mol0.0300\text{ mol} of sodium chloride (NaCl\text{NaCl}) into distilled water to make 500.0 mL500.0\text{ mL} of mixed solution. When reporting the resulting ion concentrations, students often mistakenly treat the sodium ions from the two salts as separate species or overlook the stoichiometry of polyatomic counterions. Calculate the true total molar concentration of sodium ions, [Na+][\text{Na}^+], as well as [CO32−][\text{CO}_3^{2-}] and [Cl−][\text{Cl}^-] in this homogeneous mixture.

Answer and steps

Final answer

[Na+]=0.260 M[\text{Na}^+] = 0.260\text{ M}, [CO32−]=0.100 M[\text{CO}_3^{2-}] = 0.100\text{ M}, [Cl−]=0.0600 M[\text{Cl}^-] = 0.0600\text{ M}

Steps

01

Write the dissolution equations for both soluble salts

Both sodium carbonate (NaX2COX3\ce{Na2CO3}) and sodium chloride (NaCl\ce{NaCl}) are soluble ionic compounds that dissociate completely in water:

NaX2COX3(s)→2 NaX+(aq)+COX3X2−(aq)\ce{Na2CO3(s) -> 2 Na+(aq) + CO3^{2-}(aq)}

NaCl(s)→NaX+(aq)+ClX−(aq)\ce{NaCl(s) -> Na+(aq) + Cl-(aq)}


02

Determine the moles of each ion contributed by the salts

Use the stoichiometric ratios from the dissociation equations to find the moles of each ion:

  1. From NaX2COX3\ce{Na2CO3} (0.0500 mol0.0500\text{ mol}):

    • Each mole of NaX2COX3\ce{Na2CO3} yields 2 mol2\text{ mol} of NaX+\ce{Na+}: n(NaX+)NaX2COX3=2×0.0500 mol=0.100 moln(\ce{Na+})_{\ce{Na2CO3}} = 2 \times 0.0500\text{ mol} = 0.100\text{ mol}
    • Each mole of NaX2COX3\ce{Na2CO3} yields 1 mol1\text{ mol} of COX3X2−\ce{CO3^{2-}}: n(COX3X2−)=1×0.0500 mol=0.0500 moln(\ce{CO3^{2-}}) = 1 \times 0.0500\text{ mol} = 0.0500\text{ mol}
  2. From NaCl\ce{NaCl} (0.0300 mol0.0300\text{ mol}):

    • Each mole of NaCl\ce{NaCl} yields 1 mol1\text{ mol} of NaX+\ce{Na+}: n(NaX+)NaCl=1×0.0300 mol=0.0300 moln(\ce{Na+})_{\ce{NaCl}} = 1 \times 0.0300\text{ mol} = 0.0300\text{ mol}
    • Each mole of NaCl\ce{NaCl} yields 1 mol1\text{ mol} of ClX−\ce{Cl-}: n(ClX−)=1×0.0300 mol=0.0300 moln(\ce{Cl-}) = 1 \times 0.0300\text{ mol} = 0.0300\text{ mol}

03

Find the total moles of sodium ions

Because both salts dissolve in the same solution, the total amount of sodium ions is the sum of the amounts from both sources:

ntotal(NaX+)=n(NaX+)NaX2COX3+n(NaX+)NaCl=0.100 mol+0.0300 mol=0.130 moln_{\text{total}}(\ce{Na+}) = n(\ce{Na+})_{\ce{Na2CO3}} + n(\ce{Na+})_{\ce{NaCl}} = 0.100\text{ mol} + 0.0300\text{ mol} = 0.130\text{ mol}

Common Pitfall: A frequent mistake is calculating [NaX+][\ce{Na+}] from only one compound or forgetting the subscript 22 in NaX2COX3\ce{Na2CO3}. Every formula unit of NaX2COX3\ce{Na2CO3} releases two NaX+\ce{Na+} ions into the common pool of solution.


04

Calculate the molar concentrations

Convert the solution volume from milliliters to liters:

V=500.0 mL=0.5000 LV = 500.0\text{ mL} = 0.5000\text{ L}

Using the definition of molarity, M=nVM = \frac{n}{V}:

  • For [NaX+][\ce{Na+}]: [NaX+]=0.130 mol0.5000 L=0.260 M[\ce{Na+}] = \frac{0.130\text{ mol}}{0.5000\text{ L}} = 0.260\text{ M}
  • For [COX3X2−][\ce{CO3^{2-}}]: [COX3X2−]=0.0500 mol0.5000 L=0.100 M[\ce{CO3^{2-}}] = \frac{0.0500\text{ mol}}{0.5000\text{ L}} = 0.100\text{ M}
  • For [ClX−][\ce{Cl-}] : [ClX−]=0.0300 mol0.5000 L=0.0600 M[\ce{Cl-}] = \frac{0.0300\text{ mol}}{0.5000\text{ L}} = 0.0600\text{ M}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the subscript 2 in Na₂CO₃, assuming 1 mole of Na₂CO₃ yields only 1 mole of Na⁺, leading to an underestimated total [Na⁺] of 0.160 M.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(NaX+)=0.0500 mol+0.0300 mol=0.0800 moln(\ce{Na+}) = 0.0500\text{ mol} + 0.0300\text{ mol} = 0.0800\text{ mol}

    Correct

    n(NaX+)=2(0.0500 mol)+0.0300 mol=0.130 moln(\ce{Na+}) = 2(0.0500\text{ mol}) + 0.0300\text{ mol} = 0.130\text{ mol}

    Each mole of NaX2COX3\ce{Na2CO3} dissociates to produce 2 mol2\text{ mol} of NaX+\ce{Na+} ions (NaX2COX3→2 NaX++COX3X2−\ce{Na2CO3 -> 2Na+ + CO3^{2-}}). Therefore, 0.0500 mol0.0500\text{ mol} of NaX2COX3\ce{Na2CO3} contributes 2×0.0500 mol=0.100 mol2 \times 0.0500\text{ mol} = 0.100\text{ mol} of NaX+\ce{Na+}, making the total 0.130 mol0.130\text{ mol}.

  2. Step 2

    V=0.5000 L  ⟹  [NaX+]=0.0800 mol/0.5000 L=0.160 MV = 0.5000\text{ L} \implies [\ce{Na+}] = 0.0800\text{ mol} / 0.5000\text{ L} = 0.160\text{ M}

    Correct

    [NaX+]=0.130 mol0.5000 L=0.260 M[\ce{Na+}] = \frac{0.130\text{ mol}}{0.5000\text{ L}} = 0.260\text{ M}

    You applied the molarity formula M=n/VM = n/V correctly, but the result was affected by the incorrect mole quantity from Step 1.

  3. Step 3

    n(COX3X2−)=0.0500 mol  ⟹  [COX3X2−]=0.0500 mol/0.5000 L=0.100 Mn(\ce{CO3^{2-}}) = 0.0500\text{ mol} \implies [\ce{CO3^{2-}}] = 0.0500\text{ mol} / 0.5000\text{ L} = 0.100\text{ M}

  4. Step 4

    n(ClX−)=0.0300 mol  ⟹  [ClX−]=0.0300 mol0.5000 L=0.0600 Mn(\ce{Cl-}) = 0.0300\text{ mol} \implies [\ce{Cl-}] = \frac{0.0300\text{ mol}}{0.5000\text{ L}} = 0.0600\text{ M}

WHAT YOU DID WELL
Compliments from Your Teacher

You converted the solution volume from 500.0 mL500.0\text{ mL} to 0.5000 L0.5000\text{ L} accurately.

You recognized that sodium ions originate from both NaX2COX3\ce{Na2CO3} and NaCl\ce{NaCl} and must be combined.

You calculated [COX3X2−][\ce{CO3^{2-}}] and [ClX−][\ce{Cl-}] completely correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dissociation Stoichiometry Omission

You treated 1 mol1\text{ mol} of NaX2COX3\ce{Na2CO3} as yielding only 1 mol1\text{ mol} of NaX+\ce{Na+} instead of 2 mol2\text{ mol} of NaX+\ce{Na+}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking chemical formula subscripts when calculating ion quantities in strong electrolyte dissociation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dissociation Stoichiometry Check
  • For a strong electrolyte AXx BXy\ce{A_x B_y}, dissolution yields x molx\text{ mol} of AXy+\ce{A^{y+}} and y moly\text{ mol} of BXx−\ce{B^{x-}} per mole of formula unit.

  • Always write down the balanced dissociation equation before summing ion quantities across different salts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the dissociation equation: NaX2COX3(s)→2 NaX+(aq)+COX3X2−(aq)\ce{Na2CO3(s) -> 2Na+(aq) + CO3^{2-}(aq)}.

  2. Calculate moles of NaX+\ce{Na+} from NaX2COX3\ce{Na2CO3}: n=2×0.0500 mol=0.100 moln = 2 \times 0.0500\text{ mol} = 0.100\text{ mol}.

  3. Calculate total moles of NaX+\ce{Na+}: ntotal=0.100 mol+0.0300 mol=0.130 moln_{\text{total}} = 0.100\text{ mol} + 0.0300\text{ mol} = 0.130\text{ mol}.

  4. Calculate concentration: [NaX+]=0.130 mol0.5000 L=0.260 M[\ce{Na+}] = \frac{0.130\text{ mol}}{0.5000\text{ L}} = 0.260\text{ M}.

Final answer

[NaX+]=0.260 M[\ce{Na+}] = 0.260\text{ M}, [COX3X2−]=0.100 M[\ce{CO3^{2-}}] = 0.100\text{ M}, [ClX−]=0.0600 M[\ce{Cl-}] = 0.0600\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing complete dissociation equations for ionic salts before calculating moles.

  • Highlight subscripts on cations and anions to remind yourself to multiply by the stoichiometric coefficient.

OverviewACEpath Teacher's Diagnosis

02 The student fails to convert the solution volume from milliliters to liters, dividing the moles by 500.0 instead of 0.5000 L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(Na+)=2(0.0500 mol)+0.0300 mol=0.1300 moln(\text{Na}^+) = 2(0.0500\text{ mol}) + 0.0300\text{ mol} = 0.1300\text{ mol}

  2. Step 2

    [Na+]=0.1300 mol500.0 mL=0.000260 M[\text{Na}^+] = \frac{0.1300\text{ mol}}{500.0\text{ mL}} = 0.000260\text{ M}

    Correct

    [Na+]=0.130 mol0.5000 L=0.260 M[\text{Na}^+] = \frac{0.130\text{ mol}}{0.5000\text{ L}} = 0.260\text{ M}

    Molarity is defined as moles of solute per liter of solution (mol/L\text{mol}/\text{L}). Dividing by 500.0 mL500.0\text{ mL} without converting to 0.5000 L0.5000\text{ L} yields millimoles per milliliter or values smaller by a factor of 10001000.

  3. Step 3

    n(CO32−)=0.0500 mol  ⟹  [CO32−]=0.0500 mol500.0 mL=0.000100 Mn(\text{CO}_3^{2-}) = 0.0500\text{ mol} \implies [\text{CO}_3^{2-}] = \frac{0.0500\text{ mol}}{500.0\text{ mL}} = 0.000100\text{ M}

    Correct

    [CO32−]=0.0500 mol0.5000 L=0.100 M[\text{CO}_3^{2-}] = \frac{0.0500\text{ mol}}{0.5000\text{ L}} = 0.100\text{ M}

    You found the correct moles of carbonate ions, but you divided by milliliters instead of converting 500.0 mL500.0\text{ mL} to 0.5000 L0.5000\text{ L}.

  4. Step 4

    n(Cl−)=0.0300 mol  ⟹  [Cl−]=0.0300 mol500.0 mL=0.0000600 Mn(\text{Cl}^-) = 0.0300\text{ mol} \implies [\text{Cl}^-] = \frac{0.0300\text{ mol}}{500.0\text{ mL}} = 0.0000600\text{ M}

    Correct

    [Cl−]=0.0300 mol0.5000 L=0.0600 M[\text{Cl}^-] = \frac{0.0300\text{ mol}}{0.5000\text{ L}} = 0.0600\text{ M}

    You determined the correct moles of chloride ions, but repeating the volume unit omission caused the concentration to be 0.0600 M0.0600\text{ M} divided by 10001000.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that sodium carbonate releases two sodium ions per formula unit.

You accurately combined the sodium contributions from both salts to find total moles.

You identified the correct mole counts for the carbonate and chloride spectator ions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error in Molarity Calculation

You substituted the solution volume in milliliters directly into the denominator of the molarity formula instead of converting it to liters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the dimensional units of molarity (M=mol/LM = \text{mol}/\text{L}), which requires converting milliliters to liters before dividing.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molarity Unit Definition
  • Molarity (M)=moles of solute (n)volume of solution in liters (V)\text{Molarity } (M) = \frac{\text{moles of solute } (n)}{\text{volume of solution in liters } (V)}

  • Always convert volume given in milliliters to liters by dividing by 10001000 before calculating molar concentration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the solution volume to liters: V=500.0 mL×1 L1000 mL=0.5000 LV = 500.0\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.5000\text{ L}.

  2. Divide the total moles of each ion by 0.5000 L0.5000\text{ L}:

  3. [Na+]=0.130 mol0.5000 L=0.260 M[\text{Na}^+] = \frac{0.130\text{ mol}}{0.5000\text{ L}} = 0.260\text{ M}

  4. [CO32−]=0.0500 mol0.5000 L=0.100 M[\text{CO}_3^{2-}] = \frac{0.0500\text{ mol}}{0.5000\text{ L}} = 0.100\text{ M}

  5. [Cl−]=0.0300 mol0.5000 L=0.0600 M[\text{Cl}^-] = \frac{0.0300\text{ mol}}{0.5000\text{ L}} = 0.0600\text{ M}

Final answer

[Na+]=0.260 M[\text{Na}^+] = 0.260\text{ M}, [CO32−]=0.100 M[\text{CO}_3^{2-}] = 0.100\text{ M}, [Cl−]=0.0600 M[\text{Cl}^-] = 0.0600\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full unit labels (mol/L)(\text{mol}/\text{L}) when setting up molarity fractions to verify unit cancellation.

  • Check that your calculated molarity has a realistic magnitude for laboratory solutions before finalizing your answer.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the sodium ion concentration solely from Na₂CO₃, forgetting to add the Na⁺ contributed by NaCl.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(Na+)=2×0.0500 mol=0.1000 mol  ⟹  V=0.5000 L  ⟹  [Na+]=0.1000 mol0.5000 L=0.200 Mn(\text{Na}^+) = 2 \times 0.0500\text{ mol} = 0.1000\text{ mol} \implies V = 0.5000\text{ L} \implies [\text{Na}^+] = \frac{0.1000\text{ mol}}{0.5000\text{ L}} = 0.200\text{ M}

    Correct

    ntotal(Na+)=2(0.0500 mol)+1(0.0300 mol)=0.130 mol  ⟹  [Na+]=0.130 mol0.5000 L=0.260 Mn_{\text{total}}(\text{Na}^+) = 2(0.0500\text{ mol}) + 1(0.0300\text{ mol}) = 0.130\text{ mol} \implies [\text{Na}^+] = \frac{0.130\text{ mol}}{0.5000\text{ L}} = 0.260\text{ M}

    You correctly accounted for the 2:12:1 mole ratio between NaX+\ce{Na+} and NaX2COX3\ce{Na2CO3}, but both salts are dissolved in the same container. You need to add the 0.0300 mol0.0300\text{ mol} of NaX+\ce{Na+} released by NaCl\ce{NaCl} before dividing by the total volume.

  2. Step 2

    n(CO32−)=0.0500 mol  ⟹  [CO32−]=0.0500 mol0.5000 L=0.100 Mn(\text{CO}_3^{2-}) = 0.0500\text{ mol} \implies [\text{CO}_3^{2-}] = \frac{0.0500\text{ mol}}{0.5000\text{ L}} = 0.100\text{ M}

  3. Step 3

    n(Cl−)=0.0300 mol  ⟹  [Cl−]=0.0300 mol0.5000 L=0.0600 Mn(\text{Cl}^-) = 0.0300\text{ mol} \implies [\text{Cl}^-] = \frac{0.0300\text{ mol}}{0.5000\text{ L}} = 0.0600\text{ M}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the 2:12:1 subscript ratio to determine that 0.0500 mol0.0500\text{ mol} of NaX2COX3\ce{Na2CO3} yields 0.1000 mol0.1000\text{ mol} of NaX+\ce{Na+}.

You converted 500.0 mL500.0\text{ mL} to 0.5000 L0.5000\text{ L} without error.

You accurately calculated the molarities of the non-shared ions, [COX3X2−][\ce{CO3^{2-}}] and [ClX−][\ce{Cl-}].

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted common ion contributor

You solved for the sodium ion concentration using only the sodium carbonate source, forgetting that sodium chloride also contributes sodium ions to the same mixture.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating common ions from different solute sources independently rather than pooling all moles of that ion together into a single total before calculating molarity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inventory Common Ions
  • When multiple strong electrolytes share an ion, that ion's total moles equal the sum of the moles released by every solute in the solution.

  • Scan all solute chemical formulas first to list every source contributing to each target ion before applying M=ntotalVM = \frac{n_{\text{total}}}{V}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify all sources of NaX+\ce{Na+} in the solution: NaX2COX3\ce{Na2CO3} and NaCl\ce{NaCl}.

  2. Find moles from each source: n(NaX+)NaX2COX3=2×0.0500 mol=0.100 moln(\ce{Na+})_{\ce{Na2CO3}} = 2 \times 0.0500\text{ mol} = 0.100\text{ mol}, and n(NaX+)NaCl=1×0.0300 mol=0.0300 moln(\ce{Na+})_{\ce{NaCl}} = 1 \times 0.0300\text{ mol} = 0.0300\text{ mol}.

  3. Sum total moles: ntotal(NaX+)=0.100 mol+0.0300 mol=0.130 moln_{\text{total}}(\ce{Na+}) = 0.100\text{ mol} + 0.0300\text{ mol} = 0.130\text{ mol}.

  4. Divide by the solution volume: [NaX+]=0.130 mol0.5000 L=0.260 M[\ce{Na+}] = \frac{0.130\text{ mol}}{0.5000\text{ L}} = 0.260\text{ M}.

Final answer

[Na+]=0.260 M[\text{Na}^+] = 0.260\text{ M}, [CO32−]=0.100 M[\text{CO}_3^{2-}] = 0.100\text{ M}, [Cl−]=0.0600 M[\text{Cl}^-] = 0.0600\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before dividing moles by volume, list each ion species present and check whether more than one salt in the problem contains that ion.

  • Add up the moles from every contributing source: ntotal=∑nin_{\text{total}} = \sum n_i.

  • Practice with mixed solutions containing shared cations or anions to reinforce pooling common ions.

Lock it in

Similar question

01

A solution is prepared by dissolving 0.040 mol0.040\text{ mol} of NaX2SOX4\ce{Na2SO4} into water to a total volume of 250 mL250\text{ mL}. Calculate [NaX+][\ce{Na+}] and [SOX4X2−][\ce{SO4^{2-}}].

Answer

[NaX+]=0.32 M[\ce{Na+}] = 0.32\text{ M}, [SOX4X2−]=0.16 M[\ce{SO4^{2-}}] = 0.16\text{ M}. Key steps: n(NaX+)=2×0.040=0.080 moln(\ce{Na+}) = 2 \times 0.040 = 0.080\text{ mol}; [NaX+]=0.080/0.250=0.32 M[\ce{Na+}] = 0.080 / 0.250 = 0.32\text{ M}; [SOX4X2−]=0.040/0.250=0.16 M[\ce{SO4^{2-}}] = 0.040 / 0.250 = 0.16\text{ M}.

02

A mixture is prepared by dissolving 0.0200 mol0.0200\text{ mol} of MgClX2\ce{MgCl2} and 0.0300 mol0.0300\text{ mol} of NaCl\ce{NaCl} in water to give 200.0 mL200.0\text{ mL} of solution. Calculate the total chloride ion concentration, [ClX−][\ce{Cl-}].

Answer

[ClX−]=0.350 M[\ce{Cl-}] = 0.350\text{ M}. Key steps: n(ClX−)MgClX2=2×0.0200=0.0400 moln(\ce{Cl-})_{\ce{MgCl2}} = 2 \times 0.0200 = 0.0400\text{ mol}; n(ClX−)NaCl=0.0300 moln(\ce{Cl-})_{\ce{NaCl}} = 0.0300\text{ mol}; ntotal=0.0700 moln_{\text{total}} = 0.0700\text{ mol}; [ClX−]=0.0700 mol/0.2000 L=0.350 M[\ce{Cl-}] = 0.0700\text{ mol} / 0.2000\text{ L} = 0.350\text{ M}.

03

You mix 100.0 mL100.0\text{ mL} of 0.150 M KX2COX30.150\text{ M } \ce{K2CO3} and 150.0 mL150.0\text{ mL} of 0.200 M KX3POX40.200\text{ M } \ce{K3PO4}. Assuming volumes are additive, what is the total potassium ion concentration, [KX+][\ce{K+}], in the resulting solution?

Answer

[KX+]=0.480 M[\ce{K+}] = 0.480\text{ M}. Key steps: n(KX+)KX2COX3=2×(0.1000 L×0.150 M)=0.0300 moln(\ce{K+})_{\ce{K2CO3}} = 2 \times (0.1000\text{ L} \times 0.150\text{ M}) = 0.0300\text{ mol}; n(KX+)KX3POX4=3×(0.1500 L×0.200 M)=0.0900 moln(\ce{K+})_{\ce{K3PO4}} = 3 \times (0.1500\text{ L} \times 0.200\text{ M}) = 0.0900\text{ mol}; ntotal=0.120 moln_{\text{total}} = 0.120\text{ mol}; Vtotal=0.2500 LV_{\text{total}} = 0.2500\text{ L}; [KX+]=0.120/0.2500=0.480 M[\ce{K+}] = 0.120 / 0.2500 = 0.480\text{ M}.

Loading workspace…