Resources

Classify each of the following four quantities encountered in a General Chemistry laboratory as either an exact number or a measured number, and state the number of significant figures each contributes to downstream calculations: (a) 1212 test tubes in a rack, (b) a mass of 14.502 g14.502\text{ g} of copper(II) sulfate recorded on an analytical balance, (c) the conversion factor 1 in=2.54 cm1\text{ in} = 2.54\text{ cm}, and (d) a volume of 25.0 mL25.0\text{ mL} delivered by a volumetric pipette.

Answer and steps

Final answer

(a) Exact number, infinite significant figures; (b) Measured number, 55 significant figures; (c) Exact number, infinite significant figures; (d) Measured number, 33 significant figures.

Steps

Understanding Exact vs. Measured Numbers

In chemical measurements and calculations, numbers fall into two distinct categories:

  1. Exact Numbers:

    • Source: Arise from counting discrete objects (for example, 33 beakers, 88 atoms) or from defined relationships/conversion factors within or between measurement systems (for example, 1 km=1000 m1\text{ km} = 1000\text{ m}, 1 in=2.54 cm1\text{ in} = 2.54\text{ cm}).
    • Uncertainty & Significant Figures: Exact numbers have no measurement uncertainty. Consequently, they possess an infinite number of significant figures (∞\infty) and never limit the precision of calculated results.
  2. Measured Numbers:

    • Source: Obtained through an instrument or measuring device (such as a balance, graduated cylinder, thermometer, or pipette).
    • Uncertainty & Significant Figures: Every physical measurement contains experimental uncertainty in its final estimated digit. Thus, measured numbers have a finite number of significant figures determined by the measuring instrument's precision.

Step-by-Step Classification

  • (a) 1212 test tubes in a rack

    • Classification: Exact number.
    • Reasoning: This value is determined by direct counting of discrete, individual objects, not by an instrument with reading error.
    • Significant Figures: Infinite (∞\infty) significant figures. It does not limit significant figures in calculations.
  • (b) A mass of 14.502 g14.502\text{ g} of copper(II) sulfate on an analytical balance

    • Classification: Measured number.
    • Reasoning: It is obtained using an analytical balance, which carries inherent instrumental uncertainty in the final decimal place (±0.001 g\pm 0.001\text{ g}).
    • Significant Figures: 55 significant figures. All nonzero digits (1,4,5,21, 4, 5, 2) and the captive zero between nonzero digits (00) are significant.
  • (c) The conversion factor 1 in=2.54 cm1\text{ in} = 2.54\text{ cm}

    • Classification: Exact number.
    • Reasoning: By international agreement (1959), the inch is defined exactly as 2.54 cm2.54\text{ cm}.
    • Significant Figures: Infinite (∞\infty) significant figures.
    • Common Pitfall: Learners often mistake 2.542.54 as having three significant figures because it contains a decimal point. Defined unit conversions are exact definitions, not experimental measurements.
  • (d) A volume of 25.0 mL25.0\text{ mL} delivered by a volumetric pipette

    • Classification: Measured number.
    • Reasoning: Volume delivered by volumetric glassware is an experimental measurement subject to calibration tolerance and user reading.
    • Significant Figures: 33 significant figures. The digits 22 and 55 are nonzero, and trailing zeros to the right of a decimal point in a measured quantity are significant.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student mistakenly treats the defined conversion factor 1 in = 2.54 cm as a measured decimal quantity with three significant figures.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Exact number, infinite significant figures

  2. Step 2

    Exact number, 5 significant figures

  3. Step 3

    Measured number, 3 significant figures

    Correct

    Exact number, infinite significant figures

    The relationship 1 in=2.54 cm1\text{ in} = 2.54\text{ cm} is an exact definition established by international agreement, not an experimental measurement. Defined conversion factors have infinite significant figures and do not limit calculation precision.

  4. Step 4

    Measured number, 3 significant figures

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished counted discrete objects from continuous measurements.

You determined the correct count of significant figures for both laboratory measurements in (b) and (d).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Treated defined conversion factor as measured number

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You interpreted the presence of decimal places in 2.54 cm2.54\text{ cm} as evidence of experimental measurement uncertainty rather than checking whether the relationship is an exact definition.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Origin of the Number
  • Numbers derived from definitions (such as 1 in=2.54 cm1\text{ in} = 2.54\text{ cm} or 1 kg=1000 g1\text{ kg} = 1000\text{ g}) or direct counting of discrete items have zero uncertainty and infinite significant figures.

  • Before counting significant digits, ask whether the value comes from an experimental instrument or from an established standard definition.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the international definition of the inch: 1 in1\text{ in} is defined to be exactly 2.54 cm2.54\text{ cm}.

  2. Because this is an exact standard definition rather than a laboratory measurement, it carries no uncertainty.

  3. Classify the conversion factor as an exact number with an infinite number of significant figures.

Final answer

(a) Exact number, infinite significant figures; (b) Measured number, 55 significant figures; (c) Exact number, infinite significant figures; (d) Measured number, 33 significant figures.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review common exact defined relationships between unit systems, especially 1 in=2.54 cm1\text{ in} = 2.54\text{ cm}.

  • Practice distinguishing defined conversion factors from measured experimental quantities in multi-step dimensional analysis problems.

OverviewACEpath Teacher's Diagnosis

02 A student assumes that exact counting numbers possess finite significant figures equal to the number of visible digits.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Exact number, 22 significant figures

    Correct

    Exact number, infinite significant figures

    You correctly identified the 1212 test tubes as an exact quantity obtained by counting. However, because counting discrete objects carries zero experimental uncertainty, exact numbers possess an infinite number of significant figures (infty\\infty) and never limit calculation precision.

  2. Step 2

    Measured number, 55 significant figures

  3. Step 3

    Exact number, infinite significant figures

  4. Step 4

    Measured number, 33 significant figures

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified all four quantities as either exact or measured numbers.

You correctly identified that defined unit conversion factors possess infinite significant figures.

You correctly determined the significant figures for both experimental measurements, including recognizing trailing zeros after a decimal point.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Exact Numbers and Significant Figures

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You counted the visible digits in 1212 rather than recognizing that counted discrete objects have zero uncertainty, meaning they possess an infinite number of significant figures (infty\\infty).

REASONING PATH
Your ACEpath teacher’s suggested approach
Significant Figures of Counted Objects
  • Exact numbers derived from counting individual discrete objects contain no uncertainty and have an infinite number of significant figures (infty\\infty).

  • Whenever an exact number is counted (such as 1212 test tubes or 44 beakers), treat it as having infinite significant figures so it never limits the precision of downstream calculations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that 1212 test tubes are discrete, countable items rather than a continuous instrumental reading.

  2. Conclude that direct counting involves zero uncertainty (12.000dots12.000\\dots).

  3. Assign infinite significant figures (infty\\infty) so the count does not restrict significant figures in downstream calculations.

Final answer

(a) Exact number, infinite significant figures; (b) Measured number, 55 significant figures; (c) Exact number, infinite significant figures; (d) Measured number, 33 significant figures.

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that both defined relationships (1 in=2.54 cm1\text{ in} = 2.54\text{ cm}) and counted whole objects (1212 test tubes) share the exact classification and have infinite significant figures.

  • When performing stoichiometric or multi-step laboratory calculations, never use counts of items (like stoichiometric coefficients or container counts) to round your final answer.

OverviewACEpath Teacher's Diagnosis

03 A student disregards the trailing zero after the decimal point in 25.0 mL, incorrectly counting only two significant figures.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a) Exact number, infinite significant figures

  2. Step 2

    b) Measured number, 5 significant figures

  3. Step 3

    c) Exact number, infinite significant figures

  4. Step 4

    d) Measured number, 2 significant figures

    Correct

    Measured number, 3 significant figures

    While you correctly classified the volume as a measured number, 25.0 mL25.0\text{ mL} has 33 significant figures. A trailing zero to the right of a decimal point in a measured quantity is significant because it reflects the precision of the volumetric glassware.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished between counted objects, defined unit conversions, and measured quantities.

You correctly assigned infinite significant figures to exact numbers in parts (a) and (c).

You correctly counted all significant digits, including the captive zero, in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
trailing zero significant figures

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the trailing zero in 25.0 mL25.0\text{ mL} as a placeholder or non-significant digit rather than recognizing that trailing zeros after a decimal point indicate instrumental precision.

REASONING PATH
Your ACEpath teacher’s suggested approach
Trailing Zeros Rule
  • In a measured number containing a decimal point, all trailing zeros at the end of the number are significant.

  • Count all trailing zeros that appear after a decimal point as significant digits.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Classify 25.0 mL25.0\text{ mL} as a measured quantity obtained from glassware.

  2. Identify the nonzero digits: '22' and '55' (2 significant figures).

  3. Identify the trailing zero after the decimal point: '.0' is an estimated digit indicating precision to the tenths place, making it significant.

  4. Total significant figures: 2+1=32 + 1 = 3.

Final answer

(a) Exact number, infinite significant figures; (b) Measured number, 55 significant figures; (c) Exact number, infinite significant figures; (d) Measured number, 33 significant figures.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the rule for trailing zeros with and without a decimal point in measured quantities.

  • Practice distinguishing exact conversion factors from measured experimental quantities in calculation setups.

Lock it in

Similar question

01

Classify the value 1000 mL=1 L1000\text{ mL} = 1\text{ L} as an exact or measured number, and state how many significant figures it contributes to a calculation.

Answer

Exact number, infinite significant figures. Metric prefix conversions are defined relationships by definition, not experimental readings.

02

A student measures the length of a metal rod as 3.00 in3.00\text{ in} and converts it to centimeters using 1 in=2.54 cm1\text{ in} = 2.54\text{ cm}. How many significant figures should appear in the calculated length?

Answer

33 significant figures (7.62 cm7.62\text{ cm}). The value 3.00 in3.00\text{ in} has 33 significant figures, while the defined factor 1 in=2.54 cm1\text{ in} = 2.54\text{ cm} is exact (infinite significant figures) and does not limit precision.

03

Consider two quantities: (1) exactly 1212 eggs in a carton, and (2) an experimentally measured atomic mass of 12.011 amu12.011\text{ amu} for carbon. Explain which has infinite significant figures and why.

Answer

Quantity (1) has infinite significant figures because it is obtained by counting whole, discrete objects without uncertainty. Quantity (2) has 55 significant figures because it is an experimental measurement representing an average isotopic mass with measurement uncertainty.

Loading workspace…