Resources

Hydrogen peroxide acts as a reducing agent in basic solution when reacting with ferricyanide: Fe(CN)63−(aq)+H2O2(aq)→Fe(CN)64−(aq)+O2(g)\text{Fe(CN)}_6^{3-}(aq) + \text{H}_2\text{O}_2(aq) \rightarrow \text{Fe(CN)}_6^{4-}(aq) + \text{O}_2(g). Balance this equation in basic solution. Then identify the threshold condition on the solution pH: if an experiment requires a minimum hydroxide ion concentration [OH−]≥2.50×10−3 M[\text{OH}^-] \ge 2.50 \times 10^{-3}\text{ M} to prevent the decomposition of peroxide via competing acidic pathways, calculate the minimum pH threshold at 25∘C25^\circ\text{C} necessary to maintain this condition.

Answer and steps

Final answer

Balanced equation: 2Fe(CN)63−(aq)+H2O2(aq)+2OH−(aq)→2Fe(CN)64−(aq)+O2(g)+2H2O(l)2\text{Fe(CN)}_6^{3-}(aq) + \text{H}_2\text{O}_2(aq) + 2\text{OH}^-(aq) \rightarrow 2\text{Fe(CN)}_6^{4-}(aq) + \text{O}_2(g) + 2\text{H}_2\text{O}(l); minimum pH=11.40\text{pH} = 11.40

Steps

Part 1: Balancing the Redox Equation in Basic Solution

We use the ion-electron (half-reaction) method:

  1. Identify and separate into two half-reactions:

    • Reduction: Fe(CN)X6X3−(aq)→Fe(CN)X6X4−(aq)\ce{Fe(CN)6^3-}(aq) \rightarrow \ce{Fe(CN)6^4-}(aq)
    • Oxidation: HX2OX2(aq)→OX2(g)\ce{H2O2}(aq) \rightarrow \ce{O2}(g)
  2. Balance the reduction half-reaction:

    • The iron, carbon, and nitrogen atoms are already balanced.
    • Balance the electric charge by adding 1eX−1\ce{e-} to the reactant side: Fe(CN)X6X3−(aq)+eX−→Fe(CN)X6X4−(aq)\ce{Fe(CN)6^3-}(aq) + \ce{e-} \rightarrow \ce{Fe(CN)6^4-}(aq)
  3. Balance the oxidation half-reaction:

    • Balance oxygen atoms: there are 22 on each side.
    • Balance hydrogen atoms by adding 2HX+2\ce{H+} to the product side: HX2OX2(aq)→OX2(g)+2HX+(aq)\ce{H2O2}(aq) \rightarrow \ce{O2}(g) + 2\ce{H+}(aq)
    • Balance electric charge by adding 2eX−2\ce{e-} to the product side: HX2OX2(aq)→OX2(g)+2HX+(aq)+2eX−\ce{H2O2}(aq) \rightarrow \ce{O2}(g) + 2\ce{H+}(aq) + 2\ce{e-}
    • Because the reaction occurs in a basic medium, neutralize HX+\ce{H+} by adding 2OHX−2\ce{OH-} to both sides: HX2OX2(aq)+2OHX−(aq)→OX2(g)+2HX+(aq)+2OHX−(aq)⏟2HX2O(l)+2eX−\ce{H2O2}(aq) + 2\ce{OH-}(aq) \rightarrow \ce{O2}(g) + \underbrace{2\ce{H+}(aq) + 2\ce{OH-}(aq)}_{2\ce{H2O}(l)} + 2\ce{e-} HX2OX2(aq)+2OHX−(aq)→OX2(g)+2HX2O(l)+2eX−\ce{H2O2}(aq) + 2\ce{OH-}(aq) \rightarrow \ce{O2}(g) + 2\ce{H2O}(l) + 2\ce{e-}
  4. Equalize electrons and combine:

    • Multiply the reduction half-reaction by 22 so both half-reactions involve 2eX−2\ce{e-}: 2Fe(CN)X6X3−(aq)+2eX−→2Fe(CN)X6X4−(aq)2\ce{Fe(CN)6^3-}(aq) + 2\ce{e-} \rightarrow 2\ce{Fe(CN)6^4-}(aq)
    • Add the two half-reactions together: 2Fe(CN)X6X3−(aq)+HX2OX2(aq)+2OHX−(aq)→2Fe(CN)X6X4−(aq)+OX2(g)+2HX2O(l)2\ce{Fe(CN)6^3-}(aq) + \ce{H2O2}(aq) + 2\ce{OH-}(aq) \rightarrow 2\ce{Fe(CN)6^4-}(aq) + \ce{O2}(g) + 2\ce{H2O}(l)
  5. Verify atom and charge balance:

    • Atoms: Fe=2\text{Fe} = 2, C=12\text{C} = 12, N=12\text{N} = 12, H=4\text{H} = 4, O=4\text{O} = 4 on both sides.
    • Charge: Left=2(−3)+2(−1)=−8\text{Left} = 2(-3) + 2(-1) = -8; Right=2(−4)=−8\text{Right} = 2(-4) = -8. Both match.

Part 2: Determining the Minimum pH Threshold

Given the required condition at 25∘C25^\circ\text{C}: [OHX−]≥2.50×10−3 M[\ce{OH-}] \ge 2.50 \times 10^{-3}\text{ M}

  1. Calculate pOH\text{pOH}: pOH=−log⁡10[OHX−]=−log⁡10(2.50×10−3)=3−log⁡10(2.50)≈3−0.398=2.60\text{pOH} = -\log_{10}[\ce{OH-}] = -\log_{10}(2.50 \times 10^{-3}) = 3 - \log_{10}(2.50) \approx 3 - 0.398 = 2.60
  2. Calculate pH\text{pH}: Using the ion-product relationship pH+pOH=14.00\text{pH} + \text{pOH} = 14.00 at 25∘C25^\circ\text{C}: pH=14.00−pOH=14.00−2.60=11.40\text{pH} = 14.00 - \text{pOH} = 14.00 - 2.60 = 11.40

Since [OHX−]≥2.50×10−3 M[\ce{OH-}] \ge 2.50 \times 10^{-3}\text{ M} corresponds to pOH≤2.60\text{pOH} \le 2.60, the solution requires: pH≥11.40\text{pH} \ge 11.40

Therefore, the minimum pH\text{pH} threshold is 11.4011.40.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student balances the redox reaction in acidic medium using H+ instead of completing the conversion to basic solution with OH-.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    HX2OX2→OX2+2 HX++2 eX−  ⟹  2 Fe(CN)X6X3−+HX2OX2→2 Fe(CN)X6X4−+OX2+2 HX+\ce{H2O2 -> O2 + 2H+ + 2e-} \implies \ce{2Fe(CN)6^3- + H2O2 -> 2Fe(CN)6^4- + O2 + 2H+}

    Correct

    2 Fe(CN)X6X3−(aq)+HX2OX2(aq)+2OHX−(aq)→2Fe(CN)X6X4−(aq)+OX2(g)+2HX2O(l)\ce{2Fe(CN)6^3-}(aq) + \ce{H2O2}(aq) + 2\ce{OH-}(aq) \rightarrow 2\ce{Fe(CN)6^4-}(aq) + \ce{O2}(g) + 2\ce{H2O}(l)

    You correctly found the electron transfer and balanced the atoms under acidic conditions, but the reaction occurs in basic solution. You need to neutralize the 2HX+2\ce{H+} by adding 2OHX−2\ce{OH-} to both sides of the equation, combining HX+\ce{H+} and OHX−\ce{OH-} to form HX2O\ce{H2O}.

  2. Step 2

    pOH=−log⁡(2.50×10−3)=2.60  ⟹  pH=14.00−2.60=11.40  ⟹  Minimum pH=11.40\text{pOH} = -\log(2.50 \times 10^{-3}) = 2.60 \implies \text{pH} = 14.00 - 2.60 = 11.40 \implies \text{Minimum pH} = 11.40

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the oxidation half-reaction for hydrogen peroxide releasing oxygen and two electrons.

You equalized the electron count and combined the two half-reactions accurately.

You correctly computed the pOH\text{pOH} and used pH+pOH=14.00\text{pH} + \text{pOH} = 14.00 to find the correct threshold pH.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of basic medium conversion in redox balancing

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You stopped balancing once the atoms and charges balanced in acidic terms (using HX+\ce{H+}), overlooking the prompt requirement that the reaction takes place in basic medium where excess free HX+\ce{H+} cannot persist.

REASONING PATH
Your ACEpath teacher’s suggested approach
Neutralize $\ce{H+}$ for basic solutions
  • In basic solution, any HX+\ce{H+} appearing in the balanced equation must be neutralized by adding an equal number of OHX−\ce{OH-} ions to both sides, forming HX2O\ce{H2O}.

  • Add 2OHX−2\ce{OH-} to both sides to combine with 2HX+2\ce{H+} into 2HX2O2\ce{H2O}, leaving 2OHX−2\ce{OH-} on the reactant side.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Add 2OHX−2\ce{OH-} to both sides of the combined acidic equation: 2 Fe(CN)X6X3−+HX2OX2+2 OHX−→2 Fe(CN)X6X4−+OX2+2 HX++2 OHX−\ce{2Fe(CN)6^3- + H2O2 + 2OH- -> 2Fe(CN)6^4- + O2 + 2H+ + 2OH-}

  2. Combine 2HX++2OHX−2\ce{H+} + 2\ce{OH-} on the products side into 2HX2O(l)2\ce{H2O}(l): 2 Fe(CN)X6X3−(aq)+HX2OX2(aq)+2OHX−(aq)→2Fe(CN)X6X4−(aq)+OX2(g)+2HX2O(l)\ce{2Fe(CN)6^3-}(aq) + \ce{H2O2}(aq) + 2\ce{OH-}(aq) \rightarrow 2\ce{Fe(CN)6^4-}(aq) + \ce{O2}(g) + 2\ce{H2O}(l)

Final answer

Balanced equation: 2Fe(CN)X6X3−(aq)+HX2OX2(aq)+2OHX−(aq)→2Fe(CN)X6X4−(aq)+OX2(g)+2HX2O(l)2\ce{Fe(CN)6^3-}(aq) + \ce{H2O2}(aq) + 2\ce{OH-}(aq) \rightarrow 2\ce{Fe(CN)6^4-}(aq) + \ce{O2}(g) + 2\ce{H2O}(l); minimum pH=11.40\text{pH} = 11.40

NEXT STEPS
Final Takeaways from Your Teacher
  • Always double-check the reaction medium specified in the prompt before writing the final equation.

  • Whenever you finish balancing in acidic medium for a basic reaction, immediately add OHX−\ce{OH-} to both sides to cancel out all HX+\ce{H+}.

  • Verify that no free HX+\ce{H+} appears in any equation labeled as occurring in basic solution.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the negative logarithm of the hydroxide ion concentration directly and mistakes it for pH rather than pOH.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2Fe(CN)63−+2e−→2Fe(CN)64−2\text{Fe(CN)}_6^{3-} + 2e^- \rightarrow 2\text{Fe(CN)}_6^{4-} ⟹\Longrightarrow H2O2+2OH−→O2+2H2O+2e−\text{H}_2\text{O}_2 + 2\text{OH}^- \rightarrow \text{O}_2 + 2\text{H}_2\text{O} + 2e^- ⟹\Longrightarrow 2Fe(CN)63−+H2O2+2OH−→2Fe(CN)64−+O2+2H2O2\text{Fe(CN)}_6^{3-} + \text{H}_2\text{O}_2 + 2\text{OH}^- \rightarrow 2\text{Fe(CN)}_6^{4-} + \text{O}_2 + 2\text{H}_2\text{O}

  2. Step 2

    pH=−log⁡[OH−]⟹pH=−log⁡(2.50×10−3)=2.60\text{pH} = -\log[\text{OH}^-] \Longrightarrow \text{pH} = -\log(2.50 \times 10^{-3}) = 2.60

    Correct

    pOH=−log⁡[OH−]=−log⁡(2.50×10−3)=2.60⟹pH=14.00−pOH=14.00−2.60=11.40\text{pOH} = -\log[\text{OH}^-] = -\log(2.50 \times 10^{-3}) = 2.60 \Longrightarrow \text{pH} = 14.00 - \text{pOH} = 14.00 - 2.60 = 11.40

    The negative logarithm of hydroxide ion concentration gives pOH\text{pOH}, not pH\text{pH}. In aqueous solution at 25∘C25^\circ\text{C}, pH=14.00−pOH\text{pH} = 14.00 - \text{pOH}.

  3. Step 3

    Minimum pH=2.60\text{Minimum pH} = 2.60

    Correct

    Minimum pH=11.40\text{Minimum pH} = 11.40

    Because the previous step assigned the value of pOH\text{pOH} directly to pH\text{pH}, your final threshold is an acidic pH rather than the required strongly basic value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived both balanced half-reactions for reduction and oxidation in basic medium.

You successfully combined the half-reactions with equalized electron counts to produce the correct overall balanced equation.

You correctly computed the negative logarithm −log⁡(2.50×10−3)=2.60-\log(2.50 \times 10^{-3}) = 2.60.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing pH and pOH Definitions

You wrote pH=−log⁡[OH−]\text{pH} = -\log[\text{OH}^-] instead of recognizing that the negative logarithm of hydroxide concentration yields pOH\text{pOH}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the definition of pH\text{pH} (−log⁡[H+]-\log[\text{H}^+]) with pOH\text{pOH} (−log⁡[OH−]-\log[\text{OH}^-]), omitting the required conversion pH+pOH=14.00\text{pH} + \text{pOH} = 14.00 at 25∘C25^\circ\text{C}.

REASONING PATH
Your ACEpath teacher’s suggested approach
p-Function Ion Matching
  • The prefix "p" stands for −log⁡-\log. Therefore, pH=−log⁡[H+]\text{pH} = -\log[\text{H}^+] and pOH=−log⁡[OH−]\text{pOH} = -\log[\text{OH}^-].

  • Whenever you take −log⁡[OH−]-\log[\text{OH}^-], explicitly label the result as pOH\text{pOH}, never as pH\text{pH}.

Converting pOH to pH at 25 °C
  • In water at 25∘C25^\circ\text{C}, Kw=[H+][OH−]=1.0×10−14K_w = [\text{H}^+][\text{OH}^-] = 1.0 \times 10^{-14}, which simplifies to pH+pOH=14.00\text{pH} + \text{pOH} = 14.00.

  • After calculating pOH\text{pOH}, subtract it from 14.0014.00 to obtain pH\text{pH}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate pOH\text{pOH}: pOH=−log⁡[OH−]=−log⁡(2.50×10−3)=2.60\text{pOH} = -\log[\text{OH}^-] = -\log(2.50 \times 10^{-3}) = 2.60.

  2. Use the ion-product relationship at 25∘C25^\circ\text{C}: pH=14.00−pOH=14.00−2.60=11.40\text{pH} = 14.00 - \text{pOH} = 14.00 - 2.60 = 11.40.

Final answer

2Fe(CN)63−(aq)+H2O2(aq)+2OH−(aq)→2Fe(CN)64−(aq)+O2(g)+2H2O(l)2\text{Fe(CN)}_6^{3-}(aq) + \text{H}_2\text{O}_2(aq) + 2\text{OH}^-(aq) \rightarrow 2\text{Fe(CN)}_6^{4-}(aq) + \text{O}_2(g) + 2\text{H}_2\text{O}(l); minimum pH=11.40\text{pH} = 11.40

NEXT STEPS
Final Takeaways from Your Teacher
  • Always double-check that basic solutions have pH>7\text{pH} > 7; getting a pH of 2.602.60 indicates an acidic solution and should serve as an immediate red flag.

  • Write out the explicit formula pOH=−log⁡[OH−]\text{pOH} = -\log[\text{OH}^-] as an intermediate step before writing pH=14.00−pOH\text{pH} = 14.00 - \text{pOH}.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to multiply the one-electron reduction half-reaction by 2 to balance electrons with the two-electron oxidation half-reaction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fe(CN)63−+e−→Fe(CN)64−\text{Fe(CN)}_6^{3-} + \text{e}^- \rightarrow \text{Fe(CN)}_6^{4-}

  2. Step 2

    H2O2+2OH−→O2+2H2O+2e−\text{H}_2\text{O}_2 + 2\text{OH}^- \rightarrow \text{O}_2 + 2\text{H}_2\text{O} + 2\text{e}^-

  3. Step 3

    Fe(CN)63−+H2O2+2OH−→Fe(CN)64−+O2+2H2O\text{Fe(CN)}_6^{3-} + \text{H}_2\text{O}_2 + 2\text{OH}^- \rightarrow \text{Fe(CN)}_6^{4-} + \text{O}_2 + 2\text{H}_2\text{O}

    Correct

    2Fe(CN)63−+H2O2+2OH−→2Fe(CN)64−+O2+2H2O2\text{Fe(CN)}_6^{3-} + \text{H}_2\text{O}_2 + 2\text{OH}^- \rightarrow 2\text{Fe(CN)}_6^{4-} + \text{O}_2 + 2\text{H}_2\text{O}

    You added the half-reactions directly without equalizing the electrons first. The oxidation half-reaction releases 2e−2\text{e}^-, while the reduction half-reaction accepts only 1e−1\text{e}^-, so you must multiply the reduction half-reaction by 22 before adding them together.

  4. Step 4

    pOH=−log⁡(2.50×10−3)=2.60  ⟹  pH=14.00−2.60=11.40  ⟹  Minimum pH=11.40\text{pOH} = -\log(2.50 \times 10^{-3}) = 2.60 \implies \text{pH} = 14.00 - 2.60 = 11.40 \implies \text{Minimum pH} = 11.40

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the reduction half-reaction and balanced its charge with one electron.

You correctly balanced the oxidation of hydrogen peroxide in basic solution using hydroxide ions and water.

You calculated the pOH and final solution pH accurately from the given hydroxide concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unbalanced electron transfer

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You skipped the electron-equalization step of the half-reaction method, adding half-reactions with unequal electron counts (1e−1\text{e}^- versus 2e−2\text{e}^-) directly together.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check electron coefficients before adding
  • Total electrons lost in the oxidation half-reaction must equal total electrons gained in the reduction half-reaction.

  • Find the least common multiple of the electrons in both half-reactions and multiply each half-reaction by the appropriate factor before combining.

Verify net charge balance
  • The sum of electrical charges on the reactant side must equal the sum of electrical charges on the product side.

  • Calculate net charge on both sides: here, your equation gave (−3)+2(−1)=−5(-3) + 2(-1) = -5 on the left and −4-4 on the right, which immediately signals missing coefficients.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the reduction half-reaction by 22 so it consumes 2e−2\text{e}^-: 2Fe(CN)63−+2e−→2Fe(CN)64−2\text{Fe(CN)}_6^{3-} + 2\text{e}^- \rightarrow 2\text{Fe(CN)}_6^{4-}.

  2. Keep the oxidation half-reaction as written: H2O2+2OH−→O2+2H2O+2e−\text{H}_2\text{O}_2 + 2\text{OH}^- \rightarrow \text{O}_2 + 2\text{H}_2\text{O} + 2\text{e}^-.

  3. Add the two half-reactions together so that the 2e−2\text{e}^- on both sides cancel completely.

  4. Verify net charge: left side has 2(−3)+2(−1)=−82(-3) + 2(-1) = -8, and right side has 2(−4)=−82(-4) = -8.

Final answer

Balanced equation: 2Fe(CN)63−(aq)+H2O2(aq)+2OH−(aq)→2Fe(CN)64−(aq)+O2(g)+2H2O(l)2\text{Fe(CN)}_6^{3-}(aq) + \text{H}_2\text{O}_2(aq) + 2\text{OH}^-(aq) \rightarrow 2\text{Fe(CN)}_6^{4-}(aq) + \text{O}_2(g) + 2\text{H}_2\text{O}(l); minimum pH=11.40\text{pH} = 11.40

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the least common multiple rule for balancing electron transfer in redox reactions.

  • Always calculate and compare the net charge of reactants and products as a final validation step.

Lock it in

Similar question

01

Balance the oxidation half-reaction for sulfite converting to sulfate in basic medium: SOX3X2−(aq)→SOX4X2−(aq)\ce{SO3^2-}(aq) \rightarrow \ce{SO4^2-}(aq).

Answer

SOX3X2−(aq)+2OHX−(aq)→SOX4X2−(aq)+HX2O(l)+2eX−\ce{SO3^2-}(aq) + 2\ce{OH-}(aq) \rightarrow \ce{SO4^2-}(aq) + \ce{H2O}(l) + 2\ce{e-}. First balance with water and HX+\ce{H+} to get SOX3X2−+HX2O→SOX4X2−+2 HX++2 eX−\ce{SO3^2- + H2O -> SO4^2- + 2H+ + 2e-}. Then add 2OHX−2\ce{OH-} to both sides and simplify HX2O\ce{H2O}.

02

Balance the following complete redox reaction occurring in basic solution: MnOX4X−(aq)+NOX2X−(aq)→MnOX2(s)+NOX3X−(aq)\ce{MnO4-}(aq) + \ce{NO2-}(aq) \rightarrow \ce{MnO2}(s) + \ce{NO3-}(aq).

Answer

2MnOX4X−(aq)+3NOX2X−(aq)+HX2O(l)→2MnOX2(s)+3NOX3X−(aq)+2OHX−(aq)2\ce{MnO4-}(aq) + 3\ce{NO2-}(aq) + \ce{H2O}(l) \rightarrow 2\ce{MnO2}(s) + 3\ce{NO3-}(aq) + 2\ce{OH-}(aq). Reduction half-reaction: MnOX4X−+4 HX++3 eX−→MnOX2+2 HX2O\ce{MnO4- + 4H+ + 3e- -> MnO2 + 2H2O}. Oxidation half-reaction: NOX2X−+HX2O→NOX3X−+2 HX++2 eX−\ce{NO2- + H2O -> NO3- + 2H+ + 2e-}. Equalize electrons (6eX−6\ce{e-}), sum to get 2MnOX4X−+3 NOX2X−+2 HX+→2 MnOX2+3 NOX3X−+HX2O2\ce{MnO4- + 3NO2- + 2H+ -> 2MnO2 + 3NO3- + H2O}, then add 2OHX−2\ce{OH-} to both sides and simplify water.

03

A basic bleaching bath requires chlorine dioxide to disproportionate into chlorite and chlorate: ClOX2(aq)→ClOX2X−(aq)+ClOX3X−(aq)\ce{ClO2}(aq) \rightarrow \ce{ClO2-}(aq) + \ce{ClO3-}(aq). Balance this redox reaction in basic medium, and find the minimum pH\text{pH} needed at 25∘C25^\circ\text{C} to maintain [OHX−]≥0.050 M[\ce{OH-}] \ge 0.050\text{ M}.

Answer

Balanced equation: 2ClOX2(aq)+2OHX−(aq)→ClOX2X−(aq)+ClOX3X−(aq)+HX2O(l)2\ce{ClO2}(aq) + 2\ce{OH-}(aq) \rightarrow \ce{ClO2-}(aq) + \ce{ClO3-}(aq) + \ce{H2O}(l); minimum pH=12.70\text{pH} = 12.70. Reduction: ClOX2+eX−→ClOX2X−\ce{ClO2 + e- -> ClO2-}. Oxidation: ClOX2+2 OHX−→ClOX3X−+HX2O+eX−\ce{ClO2 + 2OH- -> ClO3- + H2O + e-}. Combining yields the balanced basic reaction. For the pH threshold: pOH=−log⁡(0.050)=1.30\text{pOH} = -\log(0.050) = 1.30, so pH=14.00−1.30=12.70\text{pH} = 14.00 - 1.30 = 12.70.

Loading workspace…