Resources

A chemical synthesis laboratory is testing an unknown volatile organic solvent. An insulated distillation flask contains a 0.350 mol0.350\text{ mol} liquid sample of this pure solvent at its normal boiling point. To completely vaporize the liquid into gas at constant temperature, the system absorbs 1.169×104 J1.169\times 10^4\text{ J} of heat. Using this experimental snapshot, determine the molar enthalpy of vaporization, ΔHvap\Delta H_{\text{vap}}, of the substance in kilojoules per mole (kJ/mol\text{kJ/mol}).

Answer and steps

Final answer

33.4 kJ/mol33.4\text{ kJ/mol}

Steps

To find the molar enthalpy of vaporization (ΔHvap\Delta H_{\text{vap}}), relate the total heat absorbed during a phase change at constant temperature to the amount of substance in moles.

Step 1: State the relationship for a phase change

When a liquid vaporizes at its boiling point, the temperature remains constant while energy is added to overcome intermolecular forces. The heat absorbed, qq, is directly proportional to the number of moles, nn:

q=n⋅ΔHvapq = n \cdot \Delta H_{\text{vap}}

Rearranging for the molar enthalpy of vaporization gives:

ΔHvap=qn\Delta H_{\text{vap}} = \frac{q}{n}


Step 2: Convert heat to kilojoules (kJ\text{kJ})

The problem asks for ΔHvap\Delta H_{\text{vap}} in kJ/mol\text{kJ/mol}, but the heat qq is given in joules (J\text{J}). Convert qq to kilojoules:

q=1.169×104 J⋅1 kJ1000 J=11.69 kJq = 1.169 \times 10^4\text{ J} \cdot \frac{1\text{ kJ}}{1000\text{ J}} = 11.69\text{ kJ}


Step 3: Calculate ΔHvap\Delta H_{\text{vap}}

Substitute the values of qq and n=0.350 moln = 0.350\text{ mol} into the rearranged formula:

ΔHvap=11.69 kJ0.350 mol=33.4 kJ/mol\Delta H_{\text{vap}} = \frac{11.69\text{ kJ}}{0.350\text{ mol}} = 33.4\text{ kJ/mol}


Common Pitfall to Avoid

  • Unit mismatch: A frequent error is directly dividing 1.169×104 J1.169 \times 10^4\text{ J} by 0.350 mol0.350\text{ mol}, which gives 3.34×104 J/mol3.34 \times 10^4\text{ J/mol}. Always ensure the energy unit matches the requested unit (kJ/mol\text{kJ/mol}) by dividing the joule value by 10001000.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student calculates the molar enthalpy using the heat directly in joules without converting to kilojoules, resulting in 33400 kJ/mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q=11690 J  ⟹  ΔHvap=qnq = 11690\text{ J} \implies \Delta H_{\text{vap}} = \frac{q}{n}

  2. Step 2

    ΔHvap=116900.350=33400 kJ/mol\Delta H_{\text{vap}} = \frac{11690}{0.350} = 33400\text{ kJ/mol}

    Correct

    ΔHvap=11.69 kJ0.350 mol=33.4 kJ/mol\Delta H_{\text{vap}} = \frac{11.69\text{ kJ}}{0.350\text{ mol}} = 33.4\text{ kJ/mol}

    You substituted heat in joules (11690 J11690\text{ J}) instead of kilojoules (11.69 kJ11.69\text{ kJ}). Dividing 11690 J11690\text{ J} by 0.350 mol0.350\text{ mol} yields 33400 J/mol33400\text{ J/mol}, which equals 33.4 kJ/mol33.4\text{ kJ/mol}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the governing relationship ΔHvap=qn\Delta H_{\text{vap}} = \frac{q}{n}.

You correctly performed the arithmetic division 116900.350=33400\frac{11690}{0.350} = 33400.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission (J to kJ)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You omitted the required metric conversion factor (1 kJ=1000 J1\text{ kJ} = 1000\text{ J}) when calculating molar enthalpy, assigning the desired unit kJ/mol\text{kJ/mol} directly to a numerical value calculated in J/mol\text{J/mol}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Verification Check
  • Always attach and track units throughout each substitution step (1 kJ=1000 J1\text{ kJ} = 1000\text{ J}).

  • Convert the heat value to kilojoules before dividing by moles, or explicitly multiply by 1 kJ1000 J\frac{1\text{ kJ}}{1000\text{ J}} at the end.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ΔHvap=11690 J0.350 mol=33400 J/mol\Delta H_{\text{vap}} = \frac{11690\text{ J}}{0.350\text{ mol}} = 33400\text{ J/mol}

  2. ΔHvap=33400 J/mol×1 kJ1000 J=33.4 kJ/mol\Delta H_{\text{vap}} = 33400\text{ J/mol} \times \frac{1\text{ kJ}}{1000\text{ J}} = 33.4\text{ kJ/mol}

Final answer

33.4 kJ/mol33.4\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the units inside the fraction during substitution to verify that the energy unit matches the question's target unit.

  • Practice double-checking whether experimental heat values are given in J\text{J} while molar thermodynamic quantities are requested in kJ/mol\text{kJ/mol}.

OverviewACEpath Teacher's Diagnosis

02 A student multiplies the heat energy by the number of moles instead of dividing by moles, yielding 4.09 kJ/mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q=11.69 kJq = 11.69\text{ kJ}

  2. Step 2

    ΔHvap=q×n\Delta H_{\text{vap}} = q \times n

    Correct

    ΔHvap=qn\Delta H_{\text{vap}} = \frac{q}{n}

    The total heat of a phase change is given by q=n ΔHvapq = n\,\Delta H_{\text{vap}}. Solving for molar enthalpy requires dividing heat by moles, not multiplying.

  3. Step 3

    ΔHvap=11.69×0.350=4.09 kJ/mol\Delta H_{\text{vap}} = 11.69 \times 0.350 = 4.09\text{ kJ/mol}

    Correct

    ΔHvap=11.69 kJ0.350 mol=33.4 kJ/mol\Delta H_{\text{vap}} = \frac{11.69\text{ kJ}}{0.350\text{ mol}} = 33.4\text{ kJ/mol}

    Because the formula setup was multiplied instead of divided, the numerical calculation yielded 4.09 kJ/mol4.09\text{ kJ/mol} instead of 33.4 kJ/mol33.4\text{ kJ/mol}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the energy from joules to kilojoules.

You correctly identified the given quantities for heat (qq) and amount of substance (nn).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion / algebraic rearrangement error

Multiplying heat by amount of substance instead of dividing by moles.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the relationship between intensive and extensive thermal properties: molar enthalpy is energy per mole (intensive, kJ/mol\text{kJ/mol}), meaning total heat qq must be divided by the number of moles nn.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Dimensionality Check
  • Molar enthalpy has units of kJ/mol\text{kJ/mol}, which explicitly indicates energy divided by amount of substance.

  • Check that your algebraic formula matches the desired units: kJmol\frac{\text{kJ}}{\text{mol}} requires qn\frac{q}{n}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the phase change heat formula: q=n⋅ΔHvapq = n \cdot \Delta H_{\text{vap}}.

  2. Isolate ΔHvap\Delta H_{\text{vap}} by dividing both sides by nn: ΔHvap=qn\Delta H_{\text{vap}} = \frac{q}{n}.

  3. Substitute q=11.69 kJq = 11.69\text{ kJ} and n=0.350 moln = 0.350\text{ mol}: ΔHvap=11.69 kJ0.350 mol=33.4 kJ/mol\Delta H_{\text{vap}} = \frac{11.69\text{ kJ}}{0.350\text{ mol}} = 33.4\text{ kJ/mol}.

Final answer

33.4 kJ/mol33.4\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the fundamental equation q=n ΔHq = n\,\Delta H before rearranging it for the unknown variable.

  • Perform a dimensional analysis check: multiplying kJ×mol\text{kJ} \times \text{mol} yields kJ⋅mol\text{kJ}\cdot\text{mol}, whereas the target unit is kJ/mol\text{kJ/mol}.

OverviewACEpath Teacher's Diagnosis

03 A student inverts the ratio by dividing moles by energy instead of energy by moles, arriving at 0.0299 kJ/mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q=11.69 kJq = 11.69\text{ kJ}

  2. Step 2

    ΔHvap=nq\Delta H_{\text{vap}} = \frac{n}{q}

    Correct

    ΔHvap=qn\Delta H_{\text{vap}} = \frac{q}{n}

    Molar enthalpy is defined as heat energy per mole of substance (q/nq / n), but you wrote the ratio upside down as moles per unit heat (n/qn / q).

  3. Step 3

    ΔHvap=0.35011.69=0.0299 kJ/mol\Delta H_{\text{vap}} = \frac{0.350}{11.69} = 0.0299\text{ kJ/mol}

    Correct

    ΔHvap=11.69 kJ0.350 mol=33.4 kJ/mol\Delta H_{\text{vap}} = \frac{11.69\text{ kJ}}{0.350\text{ mol}} = 33.4\text{ kJ/mol}

    Because you substituted into the inverted formula, your calculation evaluated to 0.0299 mol/kJ0.0299\text{ mol/kJ} instead of 33.4 kJ/mol33.4\text{ kJ/mol}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the need to convert heat from joules to kilojoules before calculating the final value.

You accurately substituted the given numerical values into your algebraic expression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted algebraic formula / dimensional analysis error

You accidentally divided moles by kilojoules instead of dividing kilojoules by moles.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the numerator and denominator when solving for molar enthalpy, missing that the target unit 'kJ/mol' literally instructs you to put energy (kJ) over amount of substance (mol).

REASONING PATH
Your ACEpath teacher’s suggested approach
Use units as a guide
  • The unit kJ/mol\text{kJ/mol} means kilojoules divided by moles: ΔH=qn\Delta H = \frac{q}{n}.

  • Check that the units of your numerator and denominator match the requested compound unit before doing the arithmetic.

Rearrange from the fundamental equation
  • Total heat is given by q=n⋅ΔHq = n \cdot \Delta H. Dividing both sides by nn isolates ΔH=qn\Delta H = \frac{q}{n}.

  • Always write down the base relationship q=nΔHq = n \Delta H and isolate the unknown step-by-step.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange the phase-change equation q=n⋅ΔHvapq = n \cdot \Delta H_{\text{vap}} to isolate molar enthalpy: ΔHvap=qn\Delta H_{\text{vap}} = \frac{q}{n}.

  2. Substitute q=11.69 kJq = 11.69\text{ kJ} and n=0.350 moln = 0.350\text{ mol}: ΔHvap=11.69 kJ0.350 mol\Delta H_{\text{vap}} = \frac{11.69\text{ kJ}}{0.350\text{ mol}}.

  3. Divide to find the value: ΔHvap=33.4 kJ/mol\Delta H_{\text{vap}} = 33.4\text{ kJ/mol}.

Final answer

33.4 kJ/mol33.4\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check your formulas using dimensional analysis so that energy units remain in the numerator when solving for molar enthalpy.

  • Practice rearranging q=nΔHq = n \Delta H and q=mΔHq = m \Delta H to isolate different variables before plugging in numbers.

Lock it in

Similar question

01

A liquid sample of 0.250 mol0.250\text{ mol} of ethanol absorbs 9.65×103 J9.65\times 10^3\text{ J} of heat to vaporize at its boiling point. Calculate ΔHvap\Delta H_{\text{vap}} in kJ/mol\text{kJ/mol}.

Answer

38.6 kJ/mol38.6\text{ kJ/mol}. First convert heat to kilojoules: q=9.65 kJq = 9.65\text{ kJ}. Then compute ΔHvap=9.65 kJ0.250 mol=38.6 kJ/mol\Delta H_{\text{vap}} = \frac{9.65\text{ kJ}}{0.250\text{ mol}} = 38.6\text{ kJ/mol}.

02

A solid block requires 2.48×104 J2.48\times 10^4\text{ J} to melt completely at its melting point. If the molar enthalpy of fusion is ΔHfus=6.20 kJ/mol\Delta H_{\text{fus}} = 6.20\text{ kJ/mol}, how many moles of the substance were melted?

Answer

4.00 mol4.00\text{ mol}. Convert qq to kilojoules: q=24.8 kJq = 24.8\text{ kJ}. Then solve for n=qΔHfus=24.8 kJ6.20 kJ/mol=4.00 moln = \frac{q}{\Delta H_{\text{fus}}} = \frac{24.8\text{ kJ}}{6.20\text{ kJ/mol}} = 4.00\text{ mol}.

03

A 5.40 g5.40\text{ g} sample of water (molar mass 18.02 g/mol18.02\text{ g/mol}) at 100∘C100^\circ\text{C} absorbs 1.22×104 J1.22\times 10^4\text{ J} to vaporize completely. Calculate the molar enthalpy of vaporization of water in kJ/mol\text{kJ/mol} to three significant figures.

Answer

40.7 kJ/mol40.7\text{ kJ/mol}. First find the number of moles: n=5.40 g18.02 g/mol≈0.2997 moln = \frac{5.40\text{ g}}{18.02\text{ g/mol}} \approx 0.2997\text{ mol}. Convert heat to kilojoules: q=12.2 kJq = 12.2\text{ kJ}. Finally, ΔHvap=12.2 kJ0.2997 mol≈40.7 kJ/mol\Delta H_{\text{vap}} = \frac{12.2\text{ kJ}}{0.2997\text{ mol}} \approx 40.7\text{ kJ/mol}.

Loading workspace…