Resources

A standard electrochemical cell is assembled from a cadmium half-cell (ECd2+/Cd∘=−0.40 VE^\circ_{\text{Cd}^{2+}/\text{Cd}} = -0.40\text{ V}) and an iron half-cell (EFe2+/Fe∘=−0.44 VE^\circ_{\text{Fe}^{2+}/\text{Fe}} = -0.44\text{ V}). The spontaneous overall reaction is: Fe(s)+Cd2+(aq)⇌Fe2+(aq)+Cd(s)\text{Fe}(s) + \text{Cd}^{2+}(aq) \rightleftharpoons \text{Fe}^{2+}(aq) + \text{Cd}(s) At 298 K298\text{ K}, if [extCd2+]=0.100 M[ ext{Cd}^{2+}] = 0.100\text{ M}, determine the critical threshold concentration of [Fe2+][\text{Fe}^{2+}] above which the forward cell reaction ceases to be spontaneous (i.e., where Ecell≤0 VE_{\text{cell}} \le 0\text{ V}). Use the Nernst equation at 298 K298\text{ K}: Ecell=Ecell∘−0.0592 Vnlog⁡QE_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0592\text{ V}}{n}\log Q.

Answer and steps

Final answer

Threshold [Fe2+]=2.26 M[\text{Fe}^{2+}] = 2.26\text{ M} (the reaction ceases to be spontaneous when [Fe2+]≥2.26 M[\text{Fe}^{2+}] \ge 2.26\text{ M}).

Steps

01

Calculate the Standard Cell Potential (Ecell∘E^\circ_{\text{cell}})

To find the threshold concentration of FeX2+\ce{Fe^{2+}} at which the forward reaction ceases to be spontaneous, we determine the condition where the cell potential drops to zero (Ecell≤0 VE_{\text{cell}} \le 0\text{ V}).

Identify the reduction and oxidation half-reactions from the overall equation:

  • Reduction (Cathode): CdX2+(aq)+2 eX−→Cd(s)(ECd2+/Cd∘=−0.40 V)\ce{Cd^{2+}(aq) + 2e- -> Cd(s)} \quad (E^\circ_{\text{Cd}^{2+}/\text{Cd}} = -0.40\text{ V})
  • Oxidation (Anode): Fe(s)→FeX2+(aq)+2 eX−(EFe2+/Fe∘=−0.44 V)\ce{Fe(s) -> Fe^{2+}(aq) + 2e-} \quad (E^\circ_{\text{Fe}^{2+}/\text{Fe}} = -0.44\text{ V})

The standard cell potential is: Ecell∘=Ecathode∘−Eanode∘=−0.40 V−(−0.44 V)=+0.04 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = -0.40\text{ V} - (-0.44\text{ V}) = +0.04\text{ V}

The number of moles of electrons transferred per reaction cycle is n=2n = 2.


02

Write the Reaction Quotient (QQ)

Pure solids do not appear in the expression for QQ: Q=[FeX2+][CdX2+]Q = \frac{[\ce{Fe^{2+}}]}{[\ce{Cd^{2+}}]}

Given that [CdX2+]=0.100 M[\ce{Cd^{2+}}] = 0.100\text{ M}, this becomes: Q=[FeX2+]0.100Q = \frac{[\ce{Fe^{2+}}]}{0.100}


03

Apply the Nernst Equation at Equilibrium (Ecell=0 VE_{\text{cell}} = 0\text{ V})

The critical point where the reaction stops being spontaneous in the forward direction occurs when Ecell=0 VE_{\text{cell}} = 0\text{ V}: Ecell=Ecell∘−0.0592 Vnlog⁡QE_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0592\text{ V}}{n}\log Q

Substitute the known values: 0=0.04 V−0.0592 V2log⁡Q0 = 0.04\text{ V} - \frac{0.0592\text{ V}}{2}\log Q 0.04=0.0296log⁡Q0.04 = 0.0296\log Q log⁡Q=0.040.0296≈1.354\log Q = \frac{0.04}{0.0296} \approx 1.354

Solve for QQ: Q=101.354≈22.6Q = 10^{1.354} \approx 22.6


04

Calculate the Threshold Concentration [FeX2+][\ce{Fe^{2+}}]

Using the expression for QQ: [FeX2+]=Q⋅[CdX2+]=22.6⋅0.100 M≈2.26 M[\ce{Fe^{2+}}] = Q \cdot [\ce{Cd^{2+}}] = 22.6 \cdot 0.100\text{ M} \approx 2.26\text{ M}

  • Condition for spontaneity: For Ecell>0 VE_{\text{cell}} > 0\text{ V}, [FeX2+][\ce{Fe^{2+}}] must be less than 2.26 M2.26\text{ M}.
  • Therefore, the reaction ceases to be spontaneous when [FeX2+]≥2.26 M[\ce{Fe^{2+}}] \ge 2.26\text{ M}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the reaction quotient as Q = [Cd²⁺]/[Fe²⁺] by putting reactants over products.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ecell∘=−0.40−(−0.44)=0.04 V  ⟹  n=2E^\circ_{\text{cell}} = -0.40 - (-0.44) = 0.04\text{ V} \implies n = 2

  2. Step 2

    Q=[Cd2+][Fe2+]=0.100[Fe2+]Q = \frac{[\text{Cd}^{2+}]}{[\text{Fe}^{2+}]} = \frac{0.100}{[\text{Fe}^{2+}]}

    Correct

    Q=[Fe2+][Cd2+]=[Fe2+]0.100Q = \frac{[\text{Fe}^{2+}]}{[\text{Cd}^{2+}]} = \frac{[\text{Fe}^{2+}]}{0.100}

    In the overall equation Fe(s)+CdX2+(aq)⇌FeX2+(aq)+Cd(s)\ce{Fe}(s) + \ce{Cd^{2+}}(aq) \rightleftharpoons \ce{Fe^{2+}}(aq) + \ce{Cd}(s), aqueous FeX2+\ce{Fe^{2+}} is the product and CdX2+\ce{Cd^{2+}} is the reactant. The reaction quotient must always be written as [products][reactants]\frac{[\text{products}]}{[\text{reactants}]}.

  3. Step 3

    0=0.04−(0.05922)log⁡(0.100[Fe2+])  ⟹  0.04=0.0296log⁡(0.100[Fe2+])  ⟹  log⁡(0.100[Fe2+])=1.351  ⟹  0.100[Fe2+]=22.460 = 0.04 - \left(\frac{0.0592}{2}\right)\log\left(\frac{0.100}{[\text{Fe}^{2+}]}\right) \implies 0.04 = 0.0296\log\left(\frac{0.100}{[\text{Fe}^{2+}]}\right) \implies \log\left(\frac{0.100}{[\text{Fe}^{2+}]}\right) = 1.351 \implies \frac{0.100}{[\text{Fe}^{2+}]} = 22.46

    Correct

    0=0.04−0.0296log⁡Q  ⟹  log⁡Q=0.040.0296≈1.3514  ⟹  Q=101.3514≈22.50 = 0.04 - 0.0296\log Q \implies \log Q = \frac{0.04}{0.0296} \approx 1.3514 \implies Q = 10^{1.3514} \approx 22.5

    Your algebraic rearrangement and logarithm calculations followed through accurately based on your substituted QQ expression, but the underlying ratio was upside down.

  4. Step 4

    [Fe2+]=0.00445 M[\text{Fe}^{2+}] = 0.00445\text{ M}

    Correct

    [Fe2+]=Q⋅[Cd2+]=22.46×0.100 M≈2.25 M[\text{Fe}^{2+}] = Q \cdot [\text{Cd}^{2+}] = 22.46 \times 0.100\text{ M} \approx 2.25\text{ M} (or 2.26 M2.26\text{ M})

    Because QQ was inverted, you divided by 22.4622.46 rather than multiplying by [Cd2+][\text{Cd}^{2+}], resulting in the reciprocal of the correct threshold concentration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the standard cell potential using Ecathode∘−Eanode∘E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}.

You correctly identified that n=2n = 2 electrons are transferred per mole of reaction.

You set Ecell=0 VE_{\text{cell}} = 0\text{ V} to find the equilibrium boundary condition.

You performed the logarithmic and algebraic steps with solid arithmetic accuracy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Reaction Quotient

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You wrote the reaction quotient QQ as reactant over product rather than product over reactant, likely by focusing on the order in which the metal ions appeared in the reduction potential list instead of the chemical equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Always verify products over reactants for Q
  • For any redox reaction, Q=∏[aqueous products]ν∏[aqueous reactants]νQ = \frac{\prod [\text{aqueous products}]^{\nu}}{\prod [\text{aqueous reactants}]^{\nu}}, omitting pure solids and liquids.

  • Before substituting concentrations into the Nernst equation, write out the explicit chemical state for each species and confirm that ions on the right side of the arrow are in the numerator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. From the overall balanced equation Fe(s)+CdX2+(aq)⇌FeX2+(aq)+Cd(s)\ce{Fe}(s) + \ce{Cd^{2+}}(aq) \rightleftharpoons \ce{Fe^{2+}}(aq) + \ce{Cd}(s), the product ion is FeX2+\ce{Fe^{2+}} and the reactant ion is CdX2+\ce{Cd^{2+}}.

  2. Set up the correct reaction quotient: Q=[FeX2+][CdX2+]=[FeX2+]0.100Q = \frac{[\ce{Fe^{2+}}]}{[\ce{Cd^{2+}}]} = \frac{[\ce{Fe^{2+}}]}{0.100}.

  3. Substitute into the Nernst equation at Ecell=0 VE_{\text{cell}} = 0\text{ V}: 0=0.04 V−0.0592 V2log⁡Q  ⟹  0.04=0.0296log⁡Q0 = 0.04\text{ V} - \frac{0.0592\text{ V}}{2}\log Q \implies 0.04 = 0.0296\log Q.

  4. Solve for QQ: log⁡Q=0.040.0296≈1.3514  ⟹  Q≈22.46\log Q = \frac{0.04}{0.0296} \approx 1.3514 \implies Q \approx 22.46 (or 22.622.6 with rounded values).

  5. Calculate the threshold concentration: [FeX2+]=Q×[CdX2+]=22.6×0.100 M=2.26 M[\ce{Fe^{2+}}] = Q \times [\ce{Cd^{2+}}] = 22.6 \times 0.100\text{ M} = 2.26\text{ M}.

Final answer

Threshold [FeX2+]=2.26 M[\ce{Fe^{2+}}] = 2.26\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying the products and reactants directly from cell notation and overall balanced redox reactions before setting up QQ.

  • Use Le Chatelier's principle as a sanity check: increasing product concentration [FeX2+][\ce{Fe^{2+}}] should decrease EcellE_{\text{cell}}, so the spontaneous cell will tolerate [extFe2+][ ext{Fe}^{2+}] well above 0.100 M0.100\text{ M} before shutting down (Ecell≤0E_{\text{cell}} \le 0).

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the number of transferred electrons as n = 1 instead of n = 2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ecell∘=−0.40 V−(−0.44 V)=0.04 VE^\circ_{\text{cell}} = -0.40\text{ V} - (-0.44\text{ V}) = 0.04\text{ V}

  2. Step 2

    n=1n = 1

    Correct

    n=2n = 2

    The half-reactions are Fe(s)→FeX2+(aq)+2 eX−\ce{Fe(s) -> Fe^{2+}(aq) + 2e-} and CdX2+(aq)+2 eX−→Cd(s)\ce{Cd^{2+}(aq) + 2e- -> Cd(s)}, which both involve the transfer of 22 electrons per formula unit, so n=2n = 2.

  3. Step 3

    Q=[FeX2+][CdX2+]=[FeX2+]0.100Q = \frac{[\ce{Fe^{2+}}]}{[\ce{Cd^{2+}}]} = \frac{[\ce{Fe^{2+}}]}{0.100}

  4. Step 4

    0=0.04−0.05921log⁡([FeX2+]0.100)  ⟹  log⁡([FeX2+]0.100)=0.040.0592=0.67570 = 0.04 - \frac{0.0592}{1} \log\left(\frac{[\ce{Fe^{2+}}]}{0.100}\right) \implies \log\left(\frac{[\ce{Fe^{2+}}]}{0.100}\right) = \frac{0.04}{0.0592} = 0.6757

    Correct

    0=0.04−0.05922log⁡([FeX2+]0.100)  ⟹  log⁡([FeX2+]0.100)=0.040.0296≈1.35140 = 0.04 - \frac{0.0592}{2} \log\left(\frac{[\ce{Fe^{2+}}]}{0.100}\right) \implies \log\left(\frac{[\ce{Fe^{2+}}]}{0.100}\right) = \frac{0.04}{0.0296} \approx 1.3514

    Your algebraic rearrangement was executed properly, but the result inherited the incorrect value n=1n = 1.

  5. Step 5

    [FeX2+]0.100=100.6757=4.74  ⟹  [FeX2+]=0.474 M\frac{[\ce{Fe^{2+}}]}{0.100} = 10^{0.6757} = 4.74 \implies [\ce{Fe^{2+}}] = 0.474\text{ M}

    Correct

    [FeX2+]0.100=101.3514≈22.46  ⟹  [FeX2+]≈2.25 M\frac{[\ce{Fe^{2+}}]}{0.100} = 10^{1.3514} \approx 22.46 \implies [\ce{Fe^{2+}}] \approx 2.25\text{ M} to 2.26 M2.26\text{ M}

    Your final calculation is mathematically consistent with your previous line, but it is incorrect due to the initial mistake with nn.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the standard cell potential Ecell∘=+0.04 VE^\circ_{\text{cell}} = +0.04\text{ V} accurately.

You correctly set up the reaction quotient QQ with aqueous species only.

You properly applied the condition for the cessation of spontaneity by setting Ecell=0 VE_{\text{cell}} = 0\text{ V}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect electron transfer number (n)

You set n=1n = 1 even though both half-reactions involve a 22-electron transfer from Fe\ce{Fe} to CdX2+\ce{Cd^{2+}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the stoichiometric charge balance in the half-reactions when identifying the number of moles of electrons transferred (nn) in the Nernst equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Determining $n$ in the Nernst Equation
  • Always write out both balanced half-reactions with explicit electrons: Oxidation: M→MXz++z eX−\ce{M -> M^{z+} + z e^-}; Reduction: XXz++z eX−→X\ce{X^{z+} + z e^- -> X}. The value of nn is the total number of electrons exchanged when the two half-reactions are combined.

  • Check the change in oxidation state for each element: FeX0→FeX2+\ce{Fe^0 -> Fe^{2+}} is a loss of 2 e−2\text{ e}^-, and CdX2+→CdX0\ce{Cd^{2+} -> Cd^0} is a gain of 2 e−2\text{ e}^-, so n=2n = 2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set Ecell=0 VE_{\text{cell}} = 0\text{ V} in the Nernst equation with n=2n = 2: 0=0.04−0.05922log⁡Q0 = 0.04 - \frac{0.0592}{2}\log Q.

  2. Simplify the fraction: 0.04=0.0296log⁡Q  ⟹  log⁡Q=0.040.0296≈1.35140.04 = 0.0296\log Q \implies \log Q = \frac{0.04}{0.0296} \approx 1.3514.

  3. Solve for QQ: Q=101.3514≈22.46Q = 10^{1.3514} \approx 22.46 (or 22.622.6 with 0.040.0296≈1.354\frac{0.04}{0.0296} \approx 1.354).

  4. Solve for [FeX2+][\ce{Fe^{2+}}]: [FeX2+]=Q⋅[CdX2+]=22.6×0.100 M=2.26 M[\ce{Fe^{2+}}] = Q \cdot [\ce{Cd^{2+}}] = 22.6 \times 0.100\text{ M} = 2.26\text{ M}.

Final answer

The threshold concentration is [FeX2+]=2.26 M[\ce{Fe^{2+}}] = 2.26\text{ M} (the reaction ceases to be spontaneous when [FeX2+]≥2.26 M[\ce{Fe^{2+}}] \ge 2.26\text{ M}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the two half-reactions showing the explicit number of electrons gained and lost before applying the Nernst equation.

  • Verify that the total electrons canceled in the overall balanced equation match the value you plug in for nn.

OverviewACEpath Teacher's Diagnosis

03 The student uses natural logarithm ln instead of base-10 log when using the 0.0592 V constant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ecell∘=−0.40−(−0.44)=0.04 V  ⟹  n=2E^\circ_{\text{cell}} = -0.40 - (-0.44) = 0.04\text{ V} \implies n = 2

  2. Step 2

    0=0.04−0.05922ln⁡([Fe2+]0.100)0 = 0.04 - \frac{0.0592}{2}\ln\left(\frac{[\text{Fe}^{2+}]}{0.100}\right)

    Correct

    0=0.04−0.05922log⁡([Fe2+]0.100)0 = 0.04 - \frac{0.0592}{2}\log\left(\frac{[\text{Fe}^{2+}]}{0.100}\right)

    The pre-factored constant 0.0592 V0.0592\text{ V} at 298 K298\text{ K} is derived from 2.303RTF\frac{2.303 RT}{F}, which specifically requires the base-10 logarithm (log⁡\log), not the natural logarithm (ln⁡\ln).

  3. Step 3

    ln⁡([Fe2+]0.100)=0.040.0296=1.351  ⟹  [Fe2+]0.100=e1.351=3.86\ln\left(\frac{[\text{Fe}^{2+}]}{0.100}\right) = \frac{0.04}{0.0296} = 1.351 \implies \frac{[\text{Fe}^{2+}]}{0.100} = e^{1.351} = 3.86

    Correct

    log⁡([Fe2+]0.100)=0.040.0296≈1.351  ⟹  [Fe2+]0.100=101.351≈22.46\log\left(\frac{[\text{Fe}^{2+}]}{0.100}\right) = \frac{0.04}{0.0296} \approx 1.351 \implies \frac{[\text{Fe}^{2+}]}{0.100} = 10^{1.351} \approx 22.46

    Because of the logarithm mismatch in the previous step, you solved for the quotient using base ee rather than base 1010.

  4. Step 4

    [Fe2+]=0.386 M[\text{Fe}^{2+}] = 0.386\text{ M}

    Correct

    [Fe2+]≥2.26 M[\text{Fe}^{2+}] \ge 2.26\text{ M}

    Carrying through base-10 exponentiation gives a threshold concentration of approximately 2.26 M2.26\text{ M} (or 2.25 M2.25\text{ M}), rather than 0.386 M0.386\text{ M}.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the standard cell potential accurately from the given reduction potentials.

You correctly determined that two electrons are transferred in the redox process.

You properly recognized that the threshold of spontaneity corresponds to Ecell=0 VE_{\text{cell}} = 0\text{ V}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithm Base Confusion in Nernst Equation

You wrote ln⁡\ln and took the exponential exe^x instead of writing log⁡\log and taking 10x10^x.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You paired the simplified constant 0.0592 V0.0592\text{ V} with ln⁡\ln instead of log⁡10\log_{10}. The factor 0.05920.0592 already incorporates the conversion factor ln⁡(10)≈2.3026\ln(10) \approx 2.3026; if you use ln⁡\ln, the coefficient must remain RTnF≈0.0257 Vn\frac{RT}{nF} \approx \frac{0.0257\text{ V}}{n}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Nernst Equation Constants
  • E=E∘−0.0592 Vnlog⁡10Qvs.E=E∘−RTnFln⁡Q=E∘−0.0257 Vnln⁡QE = E^\circ - \frac{0.0592\text{ V}}{n}\log_{10} Q \quad \text{vs.} \quad E = E^\circ - \frac{RT}{nF}\ln Q = E^\circ - \frac{0.0257\text{ V}}{n}\ln Q

  • Always pair the 0.0592 V0.0592\text{ V} constant with base-10 log⁡\log, or the 0.0257 V0.0257\text{ V} constant with natural ln⁡\ln.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the equilibrium condition using base-10 log: 0=0.04−0.05922log⁡Q0 = 0.04 - \frac{0.0592}{2}\log Q

  2. Isolate log⁡Q\log Q: log⁡Q=0.040.0296≈1.3514\log Q = \frac{0.04}{0.0296} \approx 1.3514

  3. Solve for QQ using base 10: Q=101.3514≈22.46Q = 10^{1.3514} \approx 22.46

  4. Substitute [Cd2+]=0.100 M[\text{Cd}^{2+}] = 0.100\text{ M} into Q=[Fe2+][Cd2+]Q = \frac{[\text{Fe}^{2+}]}{[\text{Cd}^{2+}]}: [Fe2+]=22.46×0.100 M≈2.25 M[\text{Fe}^{2+}] = 22.46 \times 0.100\text{ M} \approx 2.25\text{ M} (or 2.26 M2.26\text{ M} with 1.3541.354)

Final answer

Threshold [Fe2+]=2.26 M[\text{Fe}^{2+}] = 2.26\text{ M} (reaction ceases to be spontaneous when [Fe2+]≥2.26 M[\text{Fe}^{2+}] \ge 2.26\text{ M})

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check formula sheets to verify whether a given Nernst constant uses log⁡\log or ln⁡\ln.

  • Practice converting between base-10 and natural log versions of electrochemical relationships.

Lock it in

Similar question

01

For the galvanic cell reaction Ni(s)+PbX2+(aq)⇌NiX2+(aq)+Pb(s)\ce{Ni}(s) + \ce{Pb^{2+}}(aq) \rightleftharpoons \ce{Ni^{2+}}(aq) + \ce{Pb}(s) with Ecell∘=+0.12 VE^\circ_{\text{cell}} = +0.12\text{ V}, write the expression for QQ and calculate the equilibrium constant KK at 298 K298\text{ K} using the Nernst equation.

Answer

Q=[NiX2+][PbX2+]Q = \frac{[\ce{Ni^{2+}}]}{[\ce{Pb^{2+}}]}. At equilibrium, Ecell=0 VE_{\text{cell}} = 0\text{ V}. Since n=2n = 2, 0=0.12−0.05922log⁡K  ⟹  log⁡K=0.120.0296≈4.054  ⟹  K=104.054≈1.13×1040 = 0.12 - \frac{0.0592}{2}\log K \implies \log K = \frac{0.12}{0.0296} \approx 4.054 \implies K = 10^{4.054} \approx 1.13 \times 10^4.

02

A cell operates by the reaction Sn(s)+2 AgX+(aq)⇌SnX2+(aq)+2 Ag(s)\ce{Sn}(s) + \ce{2Ag^+}(aq) \rightleftharpoons \ce{Sn^{2+}}(aq) + \ce{2Ag}(s) with Ecell∘=+0.94 VE^\circ_{\text{cell}} = +0.94\text{ V}. If [AgX+]=0.050 M[\ce{Ag^+}] = 0.050\text{ M}, find the concentration of [SnX2+][\ce{Sn^{2+}}] required to reduce the cell potential to Ecell=+0.80 VE_{\text{cell}} = +0.80\text{ V} at 298 K298\text{ K}.

Answer

Here n=2n = 2 and Q=[SnX2+][AgX+]2=[SnX2+](0.050)2Q = \frac{[\ce{Sn^{2+}}]}{[\ce{Ag^+}]^2} = \frac{[\ce{Sn^{2+}}]}{(0.050)^2}. Using the Nernst equation: 0.80=0.94−0.0296log⁡Q  ⟹  −0.14=−0.0296log⁡Q  ⟹  log⁡Q=4.730  ⟹  Q≈5.37×1040.80 = 0.94 - 0.0296\log Q \implies -0.14 = -0.0296\log Q \implies \log Q = 4.730 \implies Q \approx 5.37 \times 10^4. Then [SnX2+]=Q×(0.050)2=5.37×104×0.0025≈134 M[\ce{Sn^{2+}}] = Q \times (0.050)^2 = 5.37 \times 10^4 \times 0.0025 \approx 134\text{ M} (a theoretical threshold demonstrating extreme product accumulation).

03

Consider the cell 3 Mg(s)+2 AlX3+(aq)⇌3 MgX2+(aq)+2 Al(s)\ce{3 Mg}(s) + \ce{2 Al^{3+}}(aq) \rightleftharpoons \ce{3 Mg^{2+}}(aq) + \ce{2 Al}(s) with Ecell∘=+0.71 VE^\circ_{\text{cell}} = +0.71\text{ V} at 298 K298\text{ K}. If [AlX3+]=0.20 M[\ce{Al^{3+}}] = 0.20\text{ M}, determine the critical concentration of [MgX2+][\ce{Mg^{2+}}] where the cell potential drops to zero (Ecell=0 VE_{\text{cell}} = 0\text{ V}).

Answer

Number of electrons n=6n = 6. The reaction quotient is Q=[MgX2+]3[AlX3+]2=[MgX2+]3(0.20)2=[MgX2+]30.040Q = \frac{[\ce{Mg^{2+}}]^3}{[\ce{Al^{3+}}]^2} = \frac{[\ce{Mg^{2+}}]^3}{(0.20)^2} = \frac{[\ce{Mg^{2+}}]^3}{0.040}. At Ecell=0E_{\text{cell}} = 0: 0=0.71−0.05926log⁡Q  ⟹  log⁡Q=0.710.009867≈71.96  ⟹  Q=1071.96≈9.1×10710 = 0.71 - \frac{0.0592}{6}\log Q \implies \log Q = \frac{0.71}{0.009867} \approx 71.96 \implies Q = 10^{71.96} \approx 9.1 \times 10^{71}. Thus [MgX2+]3=0.040×9.1×1071=3.64×1070[\ce{Mg^{2+}}]^3 = 0.040 \times 9.1 \times 10^{71} = 3.64 \times 10^{70}, giving [MgX2+]=(3.64×1070)1/3≈3.3×1023 M[\ce{Mg^{2+}}] = (3.64 \times 10^{70})^{1/3} \approx 3.3 \times 10^{23}\text{ M}.

Loading workspace…