Resources

Consider the elementary gas-phase reaction NO(g)+O3(g)→NO2(g)+O2(g)\text{NO}(g) + \text{O}_3(g) \rightarrow \text{NO}_2(g) + \text{O}_2(g), which has an activation energy of Ea=10.5 kJ/molE_a = 10.5\text{ kJ/mol}. A student proposes that doubling the absolute temperature from T1=300 KT_1 = 300\text{ K} to T2=600 KT_2 = 600\text{ K} increases the reaction rate primarily because the average molecular collision frequency doubles. Using the Arrhenius expression for the rate constant, k=Ae−Ea/(RT)k = A e^{-E_a/(RT)}, and the kinetic molecular theory relationship for collision frequency (Z∝TZ \propto \sqrt{T}), determine: (a) the factor by which the collision frequency increases when the temperature increases from 300 K300\text{ K} to 600 K600\text{ K}, (b) the factor by which the fraction of collisions having sufficient energy, f=e−Ea/(RT)f = e^{-E_a/(RT)}, increases over this same temperature interval (use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})), and (c) state which factor predominantly accounts for the rate increase according to collision theory.

Answer and steps

Final answer

(a) Collision frequency increases by a factor of 600300=2≈1.41\sqrt{\frac{600}{300}} = \sqrt{2} \approx 1.41; (b) The fraction of sufficiently energetic collisions increases by a factor of e−10500/(8.314×600)e−10500/(8.314×300)=e−2.105e−4.210=e2.105≈8.21\frac{e^{-10500/(8.314 \times 600)}}{e^{-10500/(8.314 \times 300)}} = \frac{e^{-2.105}}{e^{-4.210}} = e^{2.105} \approx 8.21; (c) The exponential increase in the fraction of collisions possessing energy E≥EaE \ge E_a (8.21-fold8.21\text{-fold}) predominantly accounts for the rate increase, vastly outweighing the modest increase in collision frequency (1.41-fold1.41\text{-fold}).

Steps

Part (a): Increase in Collision Frequency

According to the kinetic molecular theory of gases, the average molecular speed is proportional to T\sqrt{T}. Consequently, the collision frequency ZZ between gas particles is directly proportional to the square root of the absolute temperature:

Z∝TZ \propto \sqrt{T}

When the absolute temperature increases from T1=300 KT_1 = 300\text{ K} to T2=600 KT_2 = 600\text{ K}, the factor of increase in collision frequency is:

Z2Z1=T2T1=600 K300 K=2≈1.41\frac{Z_2}{Z_1} = \sqrt{\frac{T_2}{T_1}} = \sqrt{\frac{600\text{ K}}{300\text{ K}}} = \sqrt{2} \approx 1.41

Thus, doubling the absolute temperature does not double the collision frequency; it only increases it by a factor of approximately 1.411.41 (or about 41%41\%).


Part (b): Increase in the Fraction of Energetic Collisions

According to collision theory and the Maxwell–Boltzmann distribution, the fraction of collisions ff that possess kinetic energy equal to or greater than the activation energy EaE_a is given by the Boltzmann factor:

f=e−Ea/(RT)f = e^{-E_a / (RT)}

Convert the given activation energy to standard SI units: Ea=10.5 kJ/mol=10500 J/molE_a = 10.5\text{ kJ/mol} = 10500\text{ J/mol}

Calculate the exponent −Ea/(RT)-E_a / (RT) at each temperature using R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}):

  • At T1=300 KT_1 = 300\text{ K}: EaRT1=10500 J/mol(8.314 J/mol⋅K)(300 K)=105002494.2≈4.210\frac{E_a}{R T_1} = \frac{10500\text{ J/mol}}{(8.314\text{ J/mol}\cdot\text{K})(300\text{ K})} = \frac{10500}{2494.2} \approx 4.210 f1=e−4.210f_1 = e^{-4.210}
  • At T2=600 KT_2 = 600\text{ K}: EaRT2=10500 J/mol(8.314 J/mol⋅K)(600 K)=105004988.4≈2.105\frac{E_a}{R T_2} = \frac{10500\text{ J/mol}}{(8.314\text{ J/mol}\cdot\text{K})(600\text{ K})} = \frac{10500}{4988.4} \approx 2.105 f2=e−2.105f_2 = e^{-2.105}

Now, find the ratio of these fractions:

f2f1=e−2.105e−4.210=e−2.105−(−4.210)=e2.105≈8.21\frac{f_2}{f_1} = \frac{e^{-2.105}}{e^{-4.210}} = e^{-2.105 - (-4.210)} = e^{2.105} \approx 8.21

The fraction of collisions with sufficient energy to overcome the barrier increases by a factor of approximately 8.218.21.


Part (c): Dominant Factor in Rate Increase

In collision theory, the reaction rate constant is given by:

k=Z⋅ρ⋅fk = Z \cdot \rho \cdot f

where:

  • ZZ is the collision frequency,
  • ρ\rho is the steric (orientation) factor, and
  • f=e−Ea/(RT)f = e^{-E_a/(RT)} is the energetic factor.

Comparing the two effects:

  • The collision frequency ZZ increases by a modest factor of ≈1.41\approx 1.41.
  • The energetic fraction ff increases exponentially by a factor of ≈8.21\approx 8.21.

Therefore, the student's proposal is incorrect. The substantial increase in reaction rate upon heating is predominantly caused by the exponential increase in the fraction of molecules with kinetic energy E≥EaE \ge E_a, which vastly outweighs the modest increase in collision frequency.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes collision frequency is directly proportional to temperature rather than proportional to the square root of temperature, calculating an increase factor of 2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Z2Z1=T2T1=600300=2\frac{Z_2}{Z_1} = \frac{T_2}{T_1} = \frac{600}{300} = 2

    Correct

    Z2Z1=T2T1=600300=2≈1.41\frac{Z_2}{Z_1} = \sqrt{\frac{T_2}{T_1}} = \sqrt{\frac{600}{300}} = \sqrt{2} \approx 1.41

    According to kinetic molecular theory, average molecular speed is proportional to T\sqrt{T}, so the collision frequency ZZ scales as T\sqrt{T}. When temperature doubles, ZZ increases by 2≈1.41\sqrt{2} \approx 1.41, not by 22.

  2. Step 2

    f1=e(−105008.314×300)=0.01485  ⟹  f2=e(−105008.314×600)=0.12186  ⟹  f2f1=0.121860.01485=8.21f_1 = e^{\left(\frac{-10500}{8.314 \times 300}\right)} = 0.01485 \implies f_2 = e^{\left(\frac{-10500}{8.314 \times 600}\right)} = 0.12186 \implies \frac{f_2}{f_1} = \frac{0.12186}{0.01485} = 8.21

  3. Step 3

    The increase in the fraction of collisions with sufficient energy is the predominant factor because 8.218.21 is greater than 22.

    Correct

    The increase in the fraction of sufficiently energetic collisions (8.218.21-fold) predominantly accounts for the rate increase, vastly exceeding the modest increase in collision frequency (2≈1.41\sqrt{2} \approx 1.41-fold).

    Your qualitative choice is correct because the energetic fraction increases much more than collision frequency. However, your comparison cited the incorrect value of 22 from part (a) rather than the true collision frequency factor of ≈1.41\approx 1.41.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the Boltzmann factor formula f=e−Ea/(RT)f = e^{-E_a/(RT)} for the fraction of collisions with energy E≥EaE \ge E_a.

You converted EaE_a to J/mol\text{J/mol} to ensure dimensional consistency with the gas constant RR.

You correctly concluded that the exponential Boltzmann factor change is the predominant driver of the reaction rate increase.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Proportionality Misconception in Kinetic Theory

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed collision frequency is directly proportional to temperature (Z∝TZ \propto T) rather than recognizing that molecular velocity—and therefore collision frequency—depends on the square root of temperature (Z∝TZ \propto \sqrt{T}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Molecular Theory Velocity Dependence
  • Average molecular speed satisfies vavg=8RTπM∝Tv_{\text{avg}} = \sqrt{\frac{8RT}{\pi M}} \propto \sqrt{T}.

  • Whenever finding how collision rate or frequency changes with temperature, use Z∝TZ \propto \sqrt{T}, so Z2Z1=T2T1\frac{Z_2}{Z_1} = \sqrt{\frac{T_2}{T_1}}.

Collision Theory Factor Comparison
  • Temperature affects reaction rate through two factors: collision frequency (Z∝T1/2Z \propto T^{1/2}, weak power-law dependence) and the fraction of energetic collisions (f=e−Ea/RTf = e^{-E_a/RT}, strong exponential dependence).

  • Always compare the square-root factor T2/T1\sqrt{T_2/T_1} with the exponential ratio eEaR(1T1−1T2)e^{\frac{E_a}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the given relationship Z∝TZ \propto \sqrt{T} to set up the ratio: Z2Z1=T2T1\frac{Z_2}{Z_1} = \sqrt{\frac{T_2}{T_1}}.

  2. Substitute T1=300 KT_1 = 300\text{ K} and T2=600 KT_2 = 600\text{ K}: Z2Z1=600300=2≈1.414\frac{Z_2}{Z_1} = \sqrt{\frac{600}{300}} = \sqrt{2} \approx 1.414.

  3. Compare the 8.218.21-fold exponential increase in energetic collisions with the 1.411.41-fold increase in collision frequency.

Final answer

(a) 2≈1.41\sqrt{2} \approx 1.41; (b) ≈8.21\approx 8.21; (c) The fraction of collisions with sufficient energy (ff) is the predominant factor because 8.21≫1.418.21 \gg 1.41.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the kinetic molecular theory derivation showing that molecular speeds and collision frequency scale with T\sqrt{T}.

  • Practice separating the pre-exponential collision factor A(T)∝T1/2A(T) \propto T^{1/2} from the exponential Arrhenius term e−Ea/(RT)e^{-E_a/(RT)}.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert activation energy from kilojoules per mole to joules per mole, causing the exponent to be off by three orders of magnitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Z2/Z1=600300=2≈1.41Z_2/Z_1 = \sqrt{\frac{600}{300}} = \sqrt{2} \approx 1.41

  2. Step 2

    f1=e(−10.58.314×300)=e−0.00421≈0.9958  ⟹  f2=e(−10.58.314×600)=e−0.00210≈0.9979  ⟹  f2/f1=0.99790.9958=1.002f_1 = e^{\left(-\frac{10.5}{8.314 \times 300}\right)} = e^{-0.00421} \approx 0.9958 \implies f_2 = e^{\left(-\frac{10.5}{8.314 \times 600}\right)} = e^{-0.00210} \approx 0.9979 \implies f_2/f_1 = \frac{0.9979}{0.9958} = 1.002

    Correct

    Ea=10500 J/mol  ⟹  f2f1=e−10500/(8.314×600)e−10500/(8.314×300)=e−2.105e−4.210=e2.105≈8.21E_a = 10500\text{ J/mol} \implies \frac{f_2}{f_1} = \frac{e^{-10500/(8.314 \times 600)}}{e^{-10500/(8.314 \times 300)}} = \frac{e^{-2.105}}{e^{-4.210}} = e^{2.105} \approx 8.21

    You used Ea=10.5E_a = 10.5 directly in the exponent with R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}). Because the gas constant RR is expressed in joules, you must convert EaE_a from kilojoules to joules (10.5 kJ/mol=10500 J/mol10.5\text{ kJ/mol} = 10500\text{ J/mol}).

  3. Step 3

    The increase in collision frequency is the predominant factor because 1.41 is greater than 1.002.\text{The increase in collision frequency is the predominant factor because } 1.41 \text{ is greater than } 1.002.

    Correct

    The energetic fraction increase (8.21-fold) predominantly accounts for the rate increase, greatly exceeding collision frequency (1.41-fold).\text{The energetic fraction increase } (8.21\text{-fold}) \text{ predominantly accounts for the rate increase, greatly exceeding collision frequency } (1.41\text{-fold}).

    Your reasoning followed logically from your value in part (b), but because the true energetic factor increases by 8.218.21, the fraction of energetic collisions is actually the dominant contributor.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the square-root temperature proportionality for collision frequency.

You correctly set up the Boltzmann expression f=e−Ea/(RT)f = e^{-E_a/(RT)} to compare the fraction of effective collisions at two temperatures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error in Arrhenius Exponent

You substituted 10.510.5 rather than 1050010500 for EaE_a when using R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Mismatch between the energy unit of activation energy (kJ\text{kJ}) and the energy unit of the universal gas constant (J\text{J}). The exponent −Ea/(RT)-E_a/(RT) must be dimensionless, requiring identical energy units in numerator and denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency Check
  • In expressions containing RTRT where R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}), any molar energy (EaE_a, ΔH\Delta H, ΔG\Delta G) must be in J/mol\text{J/mol}.

  • Always multiply values given in kJ/mol\text{kJ/mol} by 10001000 before inserting them into exponential exponents like e−Ea/(RT)e^{-E_a/(RT)}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert activation energy: Ea=10.5 kJ/mol=10500 J/molE_a = 10.5\text{ kJ/mol} = 10500\text{ J/mol}.

  2. Compute exponents: at 300 K300\text{ K}, −Ea/(RT1)=−10500/(8.314×300)≈−4.210-E_a/(RT_1) = -10500 / (8.314 \times 300) \approx -4.210; at 600 K600\text{ K}, −Ea/(RT2)=−10500/(8.314×600)≈−2.105-E_a/(RT_2) = -10500 / (8.314 \times 600) \approx -2.105.

  3. Compute factor increase: f2/f1=e−2.105−(−4.210)=e2.105≈8.21f_2/f_1 = e^{-2.105 - (-4.210)} = e^{2.105} \approx 8.21.

  4. Compare factors: the energetic factor increases by ≈8.21\approx 8.21, which dominates over the collision frequency increase of ≈1.41\approx 1.41.

Final answer

(a) 1.411.41; (b) 8.218.21; (c) The exponential increase in the fraction of collisions with E≥EaE \ge E_a is the predominant factor.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice dimensional analysis on exponential arguments to ensure the quotient is strictly dimensionless.

  • Recalculate Arrhenius rate ratios with values of EaE_a given in both J/mol\text{J/mol} and kJ/mol\text{kJ/mol}.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts temperatures directly in the exponential denominator rather than taking the difference of their reciprocals, resulting in an erroneous factor of 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Z2Z1=600300=1.41\frac{Z_2}{Z_1} = \sqrt{\frac{600}{300}} = 1.41

  2. Step 2

    f2f1=e−−EaR×(T2−T1)  ⟹  f2f1=e−−105008.314×300=0.0148\frac{f_2}{f_1} = e^{-\frac{-E_a}{R \times (T_2 - T_1)}} \implies \frac{f_2}{f_1} = e^{-\frac{-10500}{8.314 \times 300}} = 0.0148

    Correct

    f2f1=e−Ea/(RT2)e−Ea/(RT1)=eEaR(1T1−1T2)=e105008.314(1300−1600)=e2.105≈8.21\frac{f_2}{f_1} = \frac{e^{-E_a / (R T_2)}}{e^{-E_a / (R T_1)}} = e^{\frac{E_a}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)} = e^{\frac{10500}{8.314}\left(\frac{1}{300} - \frac{1}{600}\right)} = e^{2.105} \approx 8.21

    When dividing two exponential terms, you subtract the overall exponents: eaeb=ea−b\frac{e^a}{e^b} = e^{a - b}. You cannot subtract the temperatures in the denominator directly, because −EaRT2−(−EaRT1)=EaR(1T1−1T2)-\frac{E_a}{R T_2} - \left(-\frac{E_a}{R T_1}\right) = \frac{E_a}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right), which does not equal −EaR(T2−T1)-\frac{E_a}{R(T_2 - T_1)}.

  3. Step 3

    "The increase in collision frequency is the predominant factor because 1.41 is greater than 0.0148."

    Correct

    The fraction of collisions with sufficient energy increases by a factor of 8.218.21, which is much larger than the 1.411.41-fold increase in collision frequency. Therefore, the energetic factor ff predominantly accounts for the rate increase.

    Your reasoning in this comparison followed logically from your value in part (b), but because that calculated ratio was incorrect, your conclusion that collision frequency is the dominant factor is also incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the kinetic molecular theory proportionality Z∝TZ \propto \sqrt{T} to evaluate the collision frequency ratio.

You correctly converted the activation energy EaE_a from kilojoules per mole to joules per mole.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Exponent subtraction error with temperature reciprocals

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the quotient of exponentials with temperature in the denominator as if the temperatures themselves subtract: evaluating e−Ea/(R(T2−T1))e^{-E_a/(R(T_2-T_1))} instead of evaluating the difference of reciprocal temperatures EaR(1T1−1T2)\frac{E_a}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right).

REASONING PATH
Your ACEpath teacher’s suggested approach
Quotient of Powers Rule
  • e−A/T2e−A/T1=e−A/T2−(−A/T1)=eA(1T1−1T2)\frac{e^{-A/T_2}}{e^{-A/T_1}} = e^{-A/T_2 - (-A/T_1)} = e^{A\left(\frac{1}{T_1} - \frac{1}{T_2}\right)}

  • Always subtract the entire exponents first, and factor out constants while keeping the temperatures as reciprocals.

Physical Reality Check
  • As temperature increases, the fraction of molecules with E≥EaE \ge E_a must increase, so f2/f1>1f_2 / f_1 > 1.

  • If your ratio of fractions upon heating comes out to less than 11 (like 0.01480.0148), pause and recheck your algebraic signs and exponent operations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the ratio of the Boltzmann factors using the laws of exponents: f2f1=e−Ea/(RT2)e−Ea/(RT1)=e−EaRT2−(−EaRT1)=eEaR(1T1−1T2)\frac{f_2}{f_1} = \frac{e^{-E_a/(RT_2)}}{e^{-E_a/(RT_1)}} = e^{-\frac{E_a}{RT_2} - \left(-\frac{E_a}{RT_1}\right)} = e^{\frac{E_a}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)}.

  2. Substitute the given values into the exponent: EaR(1T1−1T2)=105008.314(1300−1600)=105008.314×1600≈2.105\frac{E_a}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right) = \frac{10500}{8.314}\left(\frac{1}{300} - \frac{1}{600}\right) = \frac{10500}{8.314} \times \frac{1}{600} \approx 2.105.

  3. Calculate the factor: f2/f1=e2.105≈8.21f_2/f_1 = e^{2.105} \approx 8.21.

  4. Compare the two factors: the collision frequency increases by a factor of 1.411.41, while the fraction of energetic collisions increases by a factor of 8.218.21.

  5. Conclude that the increase in the fraction of collisions having sufficient energy (ff) predominantly accounts for the rate increase.

Final answer

(a) 1.411.41; (b) 8.218.21; (c) The exponential increase in the fraction of collisions with E≥EaE \ge E_a (8.21-fold8.21\text{-fold}) predominantly accounts for the rate increase.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the quotient rule for exponential functions and practice simplifying ratios of the form e−a/T2/e−a/T1e^{-a/T_2} / e^{-a/T_1}.

  • Always calculate each exponent or each value of ff separately if combining them algebraically feels prone to sign errors.

Lock it in

Similar question

01

A gas-phase reaction has its absolute temperature increased from 250 K250\text{ K} to 1000 K1000\text{ K}. By what factor does the collision frequency ZZ increase?

Answer

Factor of 2.02.0. Using Z∝TZ \propto \sqrt{T}, the increase factor is Z2Z1=1000 K250 K=4=2\frac{Z_2}{Z_1} = \sqrt{\frac{1000\text{ K}}{250\text{ K}}} = \sqrt{4} = 2.

02

For a reaction with activation energy Ea=50.0 kJ/molE_a = 50.0\text{ kJ/mol}, calculate: (a) the factor by which collision frequency increases from 300 K300\text{ K} to 310 K310\text{ K}, and (b) the factor by which the fraction of energetic collisions f=e−Ea/(RT)f = e^{-E_a/(RT)} increases over this same 10 K10\text{ K} interval. Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer

(a) 310300≈1.016\sqrt{\frac{310}{300}} \approx 1.016 (a 1.6%1.6\% increase). (b) f310f300=eEaR(1300−1310)=e500008.314(1093000)=e0.6466≈1.91\frac{f_{310}}{f_{300}} = e^{\frac{E_a}{R}\left(\frac{1}{300} - \frac{1}{310}\right)} = e^{\frac{50000}{8.314}\left(\frac{10}{93000}\right)} = e^{0.6466} \approx 1.91 (a 91%91\% increase). The exponential factor clearly dominates.

03

In collision theory, the rate constant is modeled as k=Z⋅ρ⋅e−Ea/(RT)k = Z \cdot \rho \cdot e^{-E_a/(RT)}, where Z=Z0TZ = Z_0 \sqrt{T}. If temperature changes from T1T_1 to T2T_2, write the exact ratio k2k1\frac{k_2}{k_1} showing both the collision-frequency contribution and the activation-energy contribution.

Answer

k2k1=(T2T1)⋅exp⁡(−EaR(1T2−1T1))\frac{k_2}{k_1} = \left(\sqrt{\frac{T_2}{T_1}}\right) \cdot \exp\left(-\frac{E_a}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right)\right). The first term accounts for the mild square-root increase in collision frequency, while the exponential term accounts for the major increase in sufficiently energetic collisions.

Loading workspace…