Resources

A block of lead (c=0.128 J/(g⋅∘C)c = 0.128\text{ J}/(\text{g}\cdot^\circ\text{C}) cools down to a final temperature of 18.5∘C18.5^\circ\text{C} after releasing 2.40 kJ2.40\text{ kJ} of heat to its surroundings. If the mass of the lead block is 750 g750\text{ g}, what was the initial temperature TiT_i of the block in ∘C^\circ\text{C} prior to cooling?

Answer and steps

Final answer

Ti=43.5∘CT_i = 43.5^\circ\text{C}

Steps

01

Convert units so that they are consistent

To find the initial temperature of the lead block, we use the specific heat formula relating heat transfer to temperature change: q=m⋅c⋅ΔTq = m \cdot c \cdot \Delta T where:

  • qq is the heat transferred,
  • mm is the mass of the substance,
  • cc is the specific heat capacity,
  • ΔT=Tf−Ti\Delta T = T_f - T_i is the change in temperature.

The specific heat capacity is given in J/(g⋅∘C)\text{J}/(\text{g}\cdot^\circ\text{C}), but the heat released is in kilojoules (kJ\text{kJ}). Convert the heat energy to joules:

2.40 kJ=2.40×103 J=2400 J2.40\text{ kJ} = 2.40 \times 10^3\text{ J} = 2400\text{ J}

Because the block releases heat to the surroundings, this process is exothermic for the lead block, meaning qq has a negative sign: q=−2400 Jq = -2400\text{ J}

02

Solve for the change in temperature (ΔT\Delta T)

Rearrange the heat equation to solve for ΔT\Delta T:

ΔT=qm⋅c\Delta T = \frac{q}{m \cdot c}

Substitute the given values:

ΔT=−2400 J750 g⋅0.128 J/(g⋅∘C)\Delta T = \frac{-2400\text{ J}}{750\text{ g} \cdot 0.128\text{ J}/(\text{g}\cdot^\circ\text{C})}

Calculate the heat capacity of the block (m⋅cm \cdot c): 750⋅0.128=96 J/∘C750 \cdot 0.128 = 96\text{ J}/^\circ\text{C}

Now, compute ΔT\Delta T: ΔT=−240096=−25.0∘C\Delta T = \frac{-2400}{96} = -25.0^\circ\text{C}

A negative temperature change confirms that the block cooled down by 25.0∘C25.0^\circ\text{C}.

03

Determine the initial temperature (TiT_i)

Since ΔT=Tf−Ti\Delta T = T_f - T_i:

−25.0∘C=18.5∘C−Ti-25.0^\circ\text{C} = 18.5^\circ\text{C} - T_i

Rearranging for TiT_i:

Ti=18.5∘C−(−25.0∘C)=18.5∘C+25.0∘C=43.5∘CT_i = 18.5^\circ\text{C} - (-25.0^\circ\text{C}) = 18.5^\circ\text{C} + 25.0^\circ\text{C} = 43.5^\circ\text{C}

Common Pitfall: Forgetting to convert kJ\text{kJ} to J\text{J} is a frequent error that leads to an incorrect temperature change by a factor of 10001000. Always check that units of energy match those in the specific heat constant.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert kilojoules to joules when using the specific heat capacity in J/(g·°C), resulting in a temperature change that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q=m⋅c⋅ΔT  ⟹  ΔT=qm⋅cq = m \cdot c \cdot \Delta T \implies \Delta T = \frac{q}{m \cdot c}

  2. Step 2

    ΔT=2.40750⋅0.128=2.4096=0.025∘C\Delta T = \frac{2.40}{750 \cdot 0.128} = \frac{2.40}{96} = 0.025^\circ\text{C}

    Correct

    ∣ΔT∣=2400 J750 g⋅0.128 J/(g⋅∘C)=240096=25.0∘C|\Delta T| = \frac{2400\text{ J}}{750\text{ g} \cdot 0.128\text{ J}/(\text{g}\cdot^\circ\text{C})} = \frac{2400}{96} = 25.0^\circ\text{C}

    You substituted q=2.40q = 2.40 directly without converting kilojoules to joules. Because specific heat capacity cc is given in J/(g⋅∘C)\text{J}/(\text{g}\cdot^\circ\text{C}), heat must be expressed in joules: 2.40 kJ=2400 J2.40\text{ kJ} = 2400\text{ J}.

  3. Step 3

    Ti=Tf+ΔT=18.5+0.025=18.525∘CT_i = T_f + \Delta T = 18.5 + 0.025 = 18.525^\circ\text{C}

    Correct

    Ti=18.5∘C+25.0∘C=43.5∘CT_i = 18.5^\circ\text{C} + 25.0^\circ\text{C} = 43.5^\circ\text{C}

    Your reasoning that the initial temperature prior to cooling is Tf+∣ΔT∣T_f + |\Delta T| was logically sound, but the result carried over your incorrect ΔT\Delta T from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and rearranged the heat formula q=m⋅c⋅ΔTq = m \cdot c \cdot \Delta T.

You accurately calculated the denominator 750×0.128=96 J/∘C750 \times 0.128 = 96\text{ J}/^\circ\text{C}.

You recognized that releasing heat causes cooling, meaning the initial temperature must be higher than the final temperature.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omitted (kJ to J)

You substituted the numerical value 2.402.40 directly from the problem statement without converting kilojoules to joules.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit consistency between the energy term (qq in kJ\text{kJ}) and the specific heat capacity constant (cc in J/(g⋅∘C)\text{J}/(\text{g}\cdot^\circ\text{C})). Whenever units of the same physical quantity differ, you must convert them to match before calculating.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match energy units
  • Specific heat capacity cc uses J/(g⋅∘C)\text{J}/(\text{g}\cdot^\circ\text{C}), so heat qq must be in joules (J\text{J}), not kilojoules (kJ\text{kJ}).

  • Multiply kilojoules by 10001000 to get joules (1 kJ=1000 J1\text{ kJ} = 1000\text{ J}) before substituting into q=m⋅c⋅ΔTq = m \cdot c \cdot \Delta T.

Physical magnitude check
  • A moderate block of metal releasing several kilojoules of heat will typically change temperature by tens of degrees, not by 0.025∘C0.025^\circ\text{C}.

  • Inspect the size of ΔT\Delta T; an unrealistically tiny fraction of a degree often flags an unhandled kilo- prefix.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert 2.40 kJ2.40\text{ kJ} to joules: qreleased=2.40×1000 J=2400 Jq_{\text{released}} = 2.40 \times 1000\text{ J} = 2400\text{ J}.

  2. Compute the magnitude of temperature change: ∣ΔT∣=2400 J750 g×0.128 J/(g⋅∘C)=240096=25.0∘C|\Delta T| = \frac{2400\text{ J}}{750\text{ g} \times 0.128\text{ J}/(\text{g}\cdot^\circ\text{C})} = \frac{2400}{96} = 25.0^\circ\text{C}.

  3. Add the temperature drop to TfT_f to find TiT_i: Ti=18.5∘C+25.0∘C=43.5∘CT_i = 18.5^\circ\text{C} + 25.0^\circ\text{C} = 43.5^\circ\text{C}.

Final answer

Ti=43.5∘CT_i = 43.5^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write units alongside every number during substitution to verify that J\text{J} cancels with J\text{J}.

  • Practice spotting energy prefix mismatches (such as kJ\text{kJ} vs. J\text{J}) in thermochemistry word problems.

OverviewACEpath Teacher's Diagnosis

02 The student treats the released heat as a positive temperature change or calculates T_f - |ΔT| instead of adding the temperature change to find a higher initial temperature.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q=2.40 kJ=2400 Jq = 2.40\text{ kJ} = 2400\text{ J}

  2. Step 2

    ΔT=qm⋅c=2400750⋅0.128=240096=25∘C\Delta T = \frac{q}{m \cdot c} = \frac{2400}{750 \cdot 0.128} = \frac{2400}{96} = 25^\circ\text{C}

    Correct

    ΔT=qm⋅c=−2400 J750 g⋅0.128 J/(g⋅∘C)=−25.0∘C\Delta T = \frac{q}{m \cdot c} = \frac{-2400\text{ J}}{750\text{ g} \cdot 0.128\text{ J}/(\text{g}\cdot^\circ\text{C})} = -25.0^\circ\text{C}

    Because the block released heat, the heat transfer for the lead block is negative (q=−2400 Jq = -2400\text{ J}). This yields a negative temperature change, ΔT=−25.0∘C\Delta T = -25.0^\circ\text{C}, reflecting that the block cooled down.

  3. Step 3

    Ti=Tf−ΔT=18.5−25=−6.5∘CT_i = T_f - \Delta T = 18.5 - 25 = -6.5^\circ\text{C}

    Correct

    Ti=Tf−ΔT=18.5∘C−(−25.0∘C)=43.5∘CT_i = T_f - \Delta T = 18.5^\circ\text{C} - (-25.0^\circ\text{C}) = 43.5^\circ\text{C}

    Your algebraic formula Ti=Tf−ΔTT_i = T_f - \Delta T is correctly rearranged from ΔT=Tf−Ti\Delta T = T_f - T_i, but substituting the incorrect positive value ΔT=25∘C\Delta T = 25^\circ\text{C} instead of −25∘C-25^\circ\text{C} led to an impossible initial temperature that is colder than the final temperature after cooling.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted kilojoules to joules using the factor of 1000 J/kJ1000\text{ J}/\text{kJ}.

You correctly calculated the heat capacity of the block as m⋅c=96 J/∘Cm \cdot c = 96\text{ J}/^\circ\text{C}.

You correctly rearranged the definition ΔT=Tf−Ti\Delta T = T_f - T_i into Ti=Tf−ΔTT_i = T_f - \Delta T.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention in heat transfer (exothermic process)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated heat released as a positive quantity in the heat equation, resulting in a positive temperature change (ΔT>0\Delta T > 0) for a cooling object instead of a negative change (ΔT<0\Delta T < 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Heat Sign Convention
  • Heat released by the system to the surroundings is exothermic, so q<0q < 0. Heat absorbed is endothermic, so q>0q > 0.

  • Always attach a negative sign to qq when a problem states that heat is released, lost, or given off.

Physical Reality Check
  • If an object cools down, its initial temperature must be greater than its final temperature (Ti>TfT_i > T_f).

  • Compare your calculated TiT_i with TfT_f; if an object cooled down to 18.5∘C18.5^\circ\text{C}, an answer of −6.5∘C-6.5^\circ\text{C} indicates that heating occurred rather than cooling.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that releasing heat means q=−2400 Jq = -2400\text{ J}.

  2. Calculate the signed temperature change: ΔT=qm⋅c=−2400 J750 g⋅0.128 J/(g⋅∘C)=−25.0∘C\Delta T = \frac{q}{m \cdot c} = \frac{-2400\text{ J}}{750\text{ g} \cdot 0.128\text{ J}/(\text{g}\cdot^\circ\text{C})} = -25.0^\circ\text{C}.

  3. Solve for TiT_i using ΔT=Tf−Ti\Delta T = T_f - T_i: Ti=Tf−ΔT=18.5∘C−(−25.0∘C)=18.5∘C+25.0∘C=43.5∘CT_i = T_f - \Delta T = 18.5^\circ\text{C} - (-25.0^\circ\text{C}) = 18.5^\circ\text{C} + 25.0^\circ\text{C} = 43.5^\circ\text{C}.

Final answer

Ti=43.5∘CT_i = 43.5^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check the sign of qq before substituting into q=mcΔTq = m c \Delta T: use negative for heat lost and positive for heat absorbed.

  • Perform a quick common-sense check on temperature changes: cooling always requires Ti>TfT_i > T_f.

OverviewACEpath Teacher's Diagnosis

03 The student miscalculates the heat capacity product m · c due to an arithmetic slip, leading to an incorrect temperature change and initial temperature.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q=2.40 kJ=2400 Jq = 2.40\text{ kJ} = 2400\text{ J}

  2. Step 2

    m⋅c=750⋅0.128=9.6m \cdot c = 750 \cdot 0.128 = 9.6

    Correct

    m⋅c=750 g×0.128 J/(g⋅∘C)=96 J/∘Cm \cdot c = 750\text{ g} \times 0.128\text{ J}/(\text{g}\cdot^\circ\text{C}) = 96\text{ J}/^\circ\text{C}

    You multiplied 750750 by 0.1280.128 and obtained 9.69.6, but 750×0.128=96750 \times 0.128 = 96. The decimal point was placed one position too far to the left.

  3. Step 3

    ΔT=24009.6=250∘C\Delta T = \frac{2400}{9.6} = 250^\circ\text{C}

    Correct

    ∣ΔT∣=2400 J96 J/∘C=25.0∘C|\Delta T| = \frac{2400\text{ J}}{96\text{ J}/^\circ\text{C}} = 25.0^\circ\text{C}

    Your formula and arithmetic were evaluated consistently with your previous value of 9.69.6, but the temperature change is tenfold too large due to the earlier decimal error.

  4. Step 4

    Ti=18.5+250=268.5∘CT_i = 18.5 + 250 = 268.5^\circ\text{C}

    Correct

    Ti=18.5∘C+25.0∘C=43.5∘CT_i = 18.5^\circ\text{C} + 25.0^\circ\text{C} = 43.5^\circ\text{C}

    You correctly reasoned that cooling means the initial temperature must be higher than the final temperature, but substituting the incorrect temperature change led to an incorrect final value.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted kilojoules to joules correctly.

You correctly set up the heat equation to solve for temperature change.

You correctly recognized that cooling implies the initial temperature is higher than the final temperature.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Arithmetic decimal error in product calculation

You made an arithmetic slip by writing 750×0.128=9.6750 \times 0.128 = 9.6 instead of 9696.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A decimal-place miscalculation occurred when multiplying an integer with trailing zeros by a three-decimal fraction, leading to a value an order of magnitude too small.

REASONING PATH
Your ACEpath teacher’s suggested approach
Order-of-magnitude estimation
  • Estimate products before calculating: 750×0.1=75750 \times 0.1 = 75, so 750×0.128750 \times 0.128 must be greater than 7575.

  • Always run a quick mental benchmark to ensure the decimal point is in the right position.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the product correctly: m⋅c=750 g×0.128 J/(g⋅∘C)=96 J/∘Cm \cdot c = 750\text{ g} \times 0.128\text{ J}/(\text{g}\cdot^\circ\text{C}) = 96\text{ J}/^\circ\text{C}.

  2. Calculate the temperature change: ∣ΔT∣=2400 J96 J/∘C=25.0∘C|\Delta T| = \frac{2400\text{ J}}{96\text{ J}/^\circ\text{C}} = 25.0^\circ\text{C}.

  3. Find the initial temperature prior to cooling: Ti=Tf+∣ΔT∣=18.5∘C+25.0∘C=43.5∘CT_i = T_f + |\Delta T| = 18.5^\circ\text{C} + 25.0^\circ\text{C} = 43.5^\circ\text{C}.

Final answer

Ti=43.5∘CT_i = 43.5^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check decimal arithmetic by doing a quick round-number estimation (e.g., 750×0.1=75750 \times 0.1 = 75).

  • Practice multi-digit decimal multiplications with unit tracking to ensure physical constants yield reasonable magnitudes.

Lock it in

Similar question

01

A 200 g200\text{ g} sample of copper (c=0.385 J/(g⋅∘C)c = 0.385\text{ J}/(\text{g}\cdot^\circ\text{C})) absorbs 3.08 kJ3.08\text{ kJ} of heat. What is the temperature increase ΔT\Delta T in ∘C^\circ\text{C}?

Answer

ΔT=40.0∘C\Delta T = 40.0^\circ\text{C}. Key steps: Convert 3.08 kJ=3080 J3.08\text{ kJ} = 3080\text{ J}. Then ΔT=qm⋅c=3080 J200 g⋅0.385 J/(g⋅∘C)=308077=40.0∘C\Delta T = \frac{q}{m \cdot c} = \frac{3080\text{ J}}{200\text{ g} \cdot 0.385\text{ J}/(\text{g}\cdot^\circ\text{C})} = \frac{3080}{77} = 40.0^\circ\text{C}.

02

An aluminum cylinder (m=450 gm = 450\text{ g}, c=0.897 J/(g⋅∘C)c = 0.897\text{ J}/(\text{g}\cdot^\circ\text{C})) at 95.0∘C95.0^\circ\text{C} releases 18.2 kJ18.2\text{ kJ} of heat as it cools. What is its final temperature TfT_f in ∘C^\circ\text{C}?

Answer

Tf=49.9∘CT_f = 49.9^\circ\text{C}. Key steps: Convert 18.2 kJ=18200 J18.2\text{ kJ} = 18200\text{ J}. Calculate temperature drop: ∣ΔT∣=18200450⋅0.897=18200403.65≈45.1∘C|\Delta T| = \frac{18200}{450 \cdot 0.897} = \frac{18200}{403.65} \approx 45.1^\circ\text{C}. Then Tf=95.0∘C−45.1∘C=49.9∘CT_f = 95.0^\circ\text{C} - 45.1^\circ\text{C} = 49.9^\circ\text{C}.

03

A piece of iron (c=0.449 J/(g⋅∘C)c = 0.449\text{ J}/(\text{g}\cdot^\circ\text{C})) cools from 150.0∘C150.0^\circ\text{C} to 22.0∘C22.0^\circ\text{C} while releasing 14.4 kJ14.4\text{ kJ} of heat. What is the mass of the iron piece in grams?

Answer

m≈251 gm \approx 251\text{ g}. Key steps: Convert 14.4 kJ=14400 J14.4\text{ kJ} = 14400\text{ J}. Find ∣ΔT∣=150.0∘C−22.0∘C=128.0∘C|\Delta T| = 150.0^\circ\text{C} - 22.0^\circ\text{C} = 128.0^\circ\text{C}. Solve for mass: m=qc⋅∣ΔT∣=144000.449⋅128.0=1440057.472≈251 gm = \frac{q}{c \cdot |\Delta T|} = \frac{14400}{0.449 \cdot 128.0} = \frac{14400}{57.472} \approx 251\text{ g}.

Loading workspace…