Resources

Consider two isomeric organic liquids: Compound A, propanoic acid (CH3CH2COOH\text{CH}_3\text{CH}_2\text{COOH}, molar mass 74.08 g/mol74.08\text{ g/mol}), and Compound B, methyl acetate (CH3COOCH3\text{CH}_3\text{COOCH}_3, molar mass 74.08 g/mol74.08\text{ g/mol}). Despite having identical molecular formulas (C3H6O2\text{C}_3\text{H}_6\text{O}_2) and similar molecular weights, Compound A boils at 141∘C141^\circ\text{C} while Compound B boils at 57∘C57^\circ\text{C}. (a) Identify the specific functional group in Compound A and Compound B. (b) Explain the counter-intuitive 84∘C84^\circ\text{C} boiling point difference using intermolecular force theory and the presence or absence of hydrogen bond donor/acceptor motifs.

Answer and steps

Final answer

(a) Compound A is a carboxylic acid (−COOH-\text{COOH}); Compound B is an ester (−COOCH3-\text{COOCH}_3); (b) Propanoic acid contains both a hydrogen-bond donor (−O−H-\text{O}-\text{H}) and a hydrogen-bond acceptor (=O=\text{O}), enabling the formation of stable, cyclic intermolecularly hydrogen-bonded dimers that significantly increase the effective molecular mass and cohesion; methyl acetate lacks an O−H\text{O}-\text{H} bond and acts only as a hydrogen-bond acceptor, interacting purely via weaker dipole-dipole attractions and London dispersion forces.

Steps

Part (a): Identifying the Functional Groups

  1. Compound A (CHX3CHX2COOH\ce{CH3CH2COOH}):

    • Structure: It contains a carbonyl group bonded directly to a hydroxyl group (−C(=O)OH-\ce{C}(=\ce{O})\ce{OH}).
    • Functional Group: Carboxylic acid group (−COOH-\ce{COOH}).
  2. Compound B (CHX3COOCHX3\ce{CH3COOCH3}):

    • Structure: It contains a carbonyl group bonded to an alkoxy group (−C(=O)O−CHX3-\ce{C}(=\ce{O})\ce{O}-\ce{CH3}).
    • Functional Group: Ester group (−COOCHX3-\ce{COOCH3} or −COO−-\ce{COO}-).

Part (b): Explaining the Boiling Point Difference via Intermolecular Forces

Boiling point reflects the amount of thermal energy required to overcome the intermolecular forces (IMFs) holding molecules together in the liquid phase. Because both compounds are constitutional isomers with the same molecular formula (CX3HX6OX2\ce{C3H6O2}) and identical molar masses (74.08 g/mol74.08\text{ g/mol}), their London dispersion forces are comparable. The large 84∘C84^\circ\text{C} difference arises from distinct dipole and hydrogen-bonding interactions:

  1. Hydrogen-Bond Donor vs. Acceptor Motifs:

    • A hydrogen-bond donor requires a hydrogen atom covalently bonded to a highly electronegative atom (such as oxygen: −O−H-\ce{O-H}).
    • A hydrogen-bond acceptor requires an electronegative atom with an available lone pair of electrons (such as the carbonyl oxygen, =O=\ce{O}).
  2. Intermolecular Forces in Compound A (Propanoic Acid):

    • Propanoic acid possesses both a hydrogen-bond donor (−O−H-\ce{O-H}) and hydrogen-bond acceptors (the carbonyl oxygen =O=\ce{O} and the hydroxyl oxygen).
    • Because it has both motifs, pure propanoic acid molecules can form extensive, strong intermolecular hydrogen bonds with one another. In particular, carboxylic acids readily pair up to form stable, cyclic, eight-membered hydrogen-bonded dimers: R−C(=O⋅⋅⋅H−O)C−R\ce{R-C(=O\bond{...}H-O)C-R}
    • These strong directional interactions effectively double the particle size in the liquid phase and create powerful cohesion, requiring a high temperature (141∘C141^\circ\text{C}) to vaporize.
  3. Intermolecular Forces in Compound B (Methyl Acetate):

    • In methyl acetate, all six hydrogen atoms are bonded directly to carbon atoms (−C−H-\ce{C-H}). Because carbon and hydrogen have very similar electronegativities, C−H\ce{C-H} bonds are nonpolar and cannot serve as hydrogen-bond donors.
    • Methyl acetate possesses only hydrogen-bond acceptors (the oxygen atoms with lone pairs).
    • Lacking hydrogen-bond donors, pure methyl acetate cannot form intermolecular hydrogen bonds between its own molecules. It is held together primarily by weaker dipole–dipole interactions (due to the polar ester carbonyl group) and London dispersion forces.
  4. Common Pitfall:

    • A frequent misconception is assuming that any oxygen-containing organic compound can hydrogen-bond with itself. While methyl acetate can accept hydrogen bonds from protic solvents like water, a pure sample cannot engage in hydrogen bonding because it lacks an −O−H-\ce{O-H} donor.

Consequently, propanoic acid requires significantly more thermal energy to disrupt its strong network of hydrogen bonds than methyl acetate requires to overcome its dipole–dipole forces, leading to the substantial 84∘C84^\circ\text{C} boiling point gap.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the ester group in Compound B as an ether and ketone mix, incorrectly concluding that Compound B cannot engage in dipole-dipole interactions.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Compound A: Carboxylic acid group  ⟹  Compound B: Ether and ketone functional groups\text{Compound A: Carboxylic acid group} \implies \text{Compound B: Ether and ketone functional groups}

    Correct

    Compound A: Carboxylic acid group  ⟹  Compound B: Ester group\text{Compound A: Carboxylic acid group} \implies \text{Compound B: Ester group}

    You correctly identified Compound A as a carboxylic acid. However, when a carbonyl group (C=O\ce{C=O}) is bonded directly to an alkoxy oxygen (−O−R\ce{-O-R}), they form a single composite functional group called an ester (−COOR\ce{-COOR}), not separate ketone and ether groups.

  2. Step 2

    Compound A has an O-H group, acting as both a hydrogen bond donor and acceptor to form hydrogen bonds.\text{Compound A has an O-H group, acting as both a hydrogen bond donor and acceptor to form hydrogen bonds.}

  3. Step 3

    Compound B lacks an O-H group, and only experiences nonpolar London dispersion forces, lacking strong dipole interactions.\text{Compound B lacks an O-H group, and only experiences nonpolar London dispersion forces, lacking strong dipole interactions.}

    Correct

    Compound B lacks an −OH donor motif (so pure liquid cannot H-bond with itself), but its polar ester group creates permanent dipole-dipole attractions in addition to London dispersion forces.\text{Compound B lacks an } \ce{-OH} \text{ donor motif (so pure liquid cannot H-bond with itself), but its polar ester group creates permanent dipole-dipole attractions in addition to London dispersion forces.}

    You correctly noticed that methyl acetate lacks an −OH\ce{-OH} donor. However, methyl acetate is a polar molecule because of the polar C=O\ce{C=O} and C−O\ce{C-O} bonds; therefore, its molecules experience permanent dipole–dipole interactions, not merely nonpolar dispersion forces.

  4. Step 4

    Propanoic acid requires more energy to overcome hydrogen bonds than methyl acetate requires to overcome dispersion forces, leading to the higher boiling point.\text{Propanoic acid requires more energy to overcome hydrogen bonds than methyl acetate requires to overcome dispersion forces, leading to the higher boiling point.}

    Correct

    Propanoic acid requires significantly more thermal energy to break its intermolecular hydrogen bonds than methyl acetate requires to overcome its dipole-dipole and dispersion forces.\text{Propanoic acid requires significantly more thermal energy to break its intermolecular hydrogen bonds than methyl acetate requires to overcome its dipole-dipole and dispersion forces.}

    Your overall comparison reaches the correct qualitative outcome (propanoic acid has a higher boiling point due to hydrogen bonding), but your reasoning carries over the misconception from Step 3 by omitting the dipole–dipole forces present in methyl acetate.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified Compound A as a carboxylic acid.

You accurately identified that the −OH\ce{-OH} group in propanoic acid serves as a hydrogen-bond donor and acceptor to form intermolecular hydrogen bonds.

You recognized that methyl acetate lacks an −OH\ce{-OH} group and therefore cannot form hydrogen bonds with itself.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Functional Group Misclassification & IMF Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated an ester group (−COO−\ce{-COO-}) as two separate groups (a ketone and an ether) rather than a unified functional group, and you associated the absence of hydrogen bonding with being completely nonpolar, forgetting that polar carbonyl-containing esters exhibit significant dipole–dipole attractions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recognizing Ester vs. Ketone/Ether
  • When a carbonyl carbon is directly bonded to an oxygen atom (−C(=O)−O−R\ce{-C(=O)-O-R}), it is an ester. It is never partitioned into an isolated ketone and ether.

  • Always check whether oxygen is directly attached to the carbonyl carbon before naming functional groups.

Intermolecular Forces in Pure Carbonyl Compounds
  • Molecules containing carbonyl groups (C=O\ce{C=O}) without an −OH\ce{-OH} or −NH\ce{-NH} bond cannot hydrogen-bond with themselves, but they are polar and experience permanent dipole–dipole forces.

  • Do not jump directly from 'no hydrogen bonding' to 'only dispersion forces'; check for net molecular polarity and permanent dipoles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that methyl acetate contains polar bonds (C=O\ce{C=O} and C−O\ce{C-O}) that do not cancel, giving it a net permanent dipole.

  2. Conclude that pure methyl acetate interacts predominantly via dipole–dipole attractions and London dispersion forces, while lacking self-hydrogen-bonding because all hydrogen atoms are bonded to carbon (C−H\ce{C-H}).

  3. Compare the thermal energy needed to disrupt the extensive cyclic hydrogen-bonded dimer network of propanoic acid (141∘C141^\circ\text{C}) against the much lower energy needed to disrupt the weaker dipole–dipole and dispersion interactions of methyl acetate (57∘C57^\circ\text{C}).

Final answer

(a) Compound A is a carboxylic acid (−COOH\ce{-COOH}); Compound B is an ester (−COOCHX3\ce{-COOCH3}). (b) Propanoic acid contains both an −OH\ce{-OH} hydrogen-bond donor and carbonyl oxygen acceptors, forming strong cyclic hydrogen-bonded dimers in the liquid phase. Methyl acetate lacks an −OH\ce{-OH} donor and interacts primarily through weaker dipole–dipole forces and London dispersion forces, resulting in an 84∘C84^\circ\text{C} lower boiling point.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the criteria for composite carbonyl functional groups (esters, amides, and carboxylic acids) versus isolated functional groups (ethers and ketones).

  • Practice distinguishing between molecules that are completely nonpolar (dispersion only) and polar molecules that possess dipole–dipole forces even when they lack hydrogen-bond donors.

OverviewACEpath Teacher's Diagnosis

02 The student assumes that having oxygen atoms allows pure methyl acetate to form intermolecular hydrogen bonds with itself by acting as both donor and acceptor.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Compound A: carboxylic acid  ⟹  Compound B: ester\text{Compound A: carboxylic acid} \implies \text{Compound B: ester}

  2. Step 2

    Compound A has an −OH group and forms hydrogen bonds as donor and acceptor.\text{Compound A has an } -\text{OH} \text{ group and forms hydrogen bonds as donor and acceptor.}

  3. Step 3

    Compound B has C-H bonds and oxygen atoms, so C-H acts as a hydrogen bond donor to the carbonyl oxygen acceptor.\text{Compound B has C-H bonds and oxygen atoms, so C-H acts as a hydrogen bond donor to the carbonyl oxygen acceptor.}

    Correct

    Methyl acetate has oxygen atoms with lone pairs (hydrogen-bond acceptors) but lacks hydrogen atoms bonded to N\text{N}, O\text{O}, or F\text{F}. Therefore, it has no hydrogen-bond donors and cannot form intermolecular hydrogen bonds with itself.

    A hydrogen-bond donor strictly requires a hydrogen atom covalently bonded to a highly electronegative atom (typically N\text{N}, O\text{O}, or F\text{F}). The C−H\text{C}-\text{H} bonds in methyl acetate are relatively nonpolar and cannot act as hydrogen-bond donors, meaning pure methyl acetate does not engage in hydrogen bonding.

  4. Step 4

    Because C-H hydrogen bonds in Compound B are weaker than O-H hydrogen bonds in Compound A, Compound B boils at a lower temperature.\text{Because C-H hydrogen bonds in Compound B are weaker than O-H hydrogen bonds in Compound A, Compound B boils at a lower temperature.}

    Correct

    Because methyl acetate cannot hydrogen-bond with itself, it is held together only by dipole-dipole attractions and London dispersion forces, which are much weaker than the strong hydrogen-bonded network of propanoic acid.

    Because this conclusion depends on the misidentification of C−H\text{C}-\text{H} as a hydrogen-bond donor, it contrasts two types of hydrogen bonding rather than contrasting hydrogen bonding with dipole-dipole attractions.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the functional groups of both compounds as a carboxylic acid and an ester.

You correctly recognized that propanoic acid contains both hydrogen-bond donor and acceptor sites.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misidentifying C-H as a Hydrogen-Bond Donor

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that any hydrogen atom in an organic molecule can serve as a hydrogen-bond donor, overlooking the requirement that a hydrogen-bond donor must have a hydrogen atom directly bonded to a highly electronegative element (N\text{N}, O\text{O}, or F\text{F}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Criteria for Hydrogen-Bond Donors
  • A hydrogen atom acts as a hydrogen-bond donor only when covalently bound to a highly electronegative atom: −O−H-\text{O}-\text{H}, −N−H-\text{N}-\text{H}, or H−F\text{H}-\text{F}. Nonpolar C−H\text{C}-\text{H} bonds do not qualify.

  • Check whether the molecule has an H\text{H} attached to O\text{O}, N\text{N}, or F\text{F} before proposing that it can donate a hydrogen bond.

Self-Hydrogen Bonding in Pure Liquids
  • For a pure liquid to exhibit intermolecular hydrogen bonding, the molecule must possess both a donor (−O−H-\text{O}-\text{H}, −N−H-\text{N}-\text{H}) and an acceptor (lone pair on O\text{O}, N\text{N}, or F\text{F}). If it only has an acceptor, pure molecules interact via dipole-dipole forces.

  • Classify molecules with carbonyls or ethers but no −O−H/−N−H-\text{O}-\text{H}/-\text{N}-\text{H} as purely dipole-dipole in a neat liquid.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that methyl acetate has six C−H\text{C}-\text{H} bonds and two oxygen atoms. Because no hydrogen atom is bonded to oxygen, it contains no hydrogen-bond donor motif.

  2. Deduce that pure methyl acetate cannot form hydrogen bonds with itself; its predominant intermolecular forces are dipole-dipole interactions arising from the polar carbonyl group, alongside London dispersion forces.

  3. Conclude that overcoming the extensive, stable hydrogen-bonded dimers in propanoic acid requires substantially more thermal energy (141∘C141^\circ\text{C}) than overcoming the weaker dipole-dipole forces in methyl acetate (57∘C57^\circ\text{C}).

Final answer

Compound A is a carboxylic acid (−COOH-\text{COOH}) and Compound B is an ester (−COOCH3-\text{COOCH}_3). Propanoic acid contains both a donor (−O−H-\text{O}-\text{H}) and acceptor (=O=\text{O}), forming strong intermolecular hydrogen-bonded dimers that elevate its boiling point to 141∘C141^\circ\text{C}. Methyl acetate has only hydrogen-bond acceptors (oxygen lone pairs) and no donors (−O−H-\text{O}-\text{H}), so pure methyl acetate cannot form hydrogen bonds; it is held together only by weaker dipole-dipole and dispersion forces, resulting in a much lower boiling point (57∘C57^\circ\text{C}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the structural definition of hydrogen-bond donors versus acceptors.

  • Practice identifying whether pure samples of carbonyl-containing isomers (such as aldehydes, ketones, and esters) can engage in self-hydrogen bonding.

OverviewACEpath Teacher's Diagnosis

03 The student attributes the boiling point difference to breaking covalent bonds within the molecule rather than overcoming intermolecular forces.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Compound A: carboxylic acid Compound B: ester

  2. Step 2

    Boiling requires breaking intramolecular chemical bonds to vaporize the liquid.

    Correct

    Boiling is a physical phase change that overcomes intermolecular forces (IMFs) between distinct molecules, leaving intramolecular covalent bonds intact.

    Boiling does not cleave covalent bonds inside a molecule. Instead, it provides thermal energy to overcome the attractive intermolecular forces holding separate molecules together in the liquid state.

  3. Step 3

    Compound A has a very strong O-H covalent bond that requires a large amount of heat energy to break at 141°C. ⟹ Compound B only has C-O and C-H single bonds, which have lower covalent bond energies and break easily at 57°C.

    Correct

    Propanoic acid contains both an −O−H\ce{-O-H} hydrogen-bond donor and =O\ce{=O} acceptors, forming strong cyclic hydrogen-bonded dimers. Methyl acetate lacks an −O−H\ce{-O-H} donor and interacts only through weaker dipole–dipole attractions and dispersion forces.

    Because you assumed covalent bonds break during boiling, you compared bond dissociation energies rather than intermolecular attractions. Propanoic acid boils higher because its molecules participate in extensive intermolecular hydrogen bonding, whereas pure methyl acetate cannot donate hydrogen bonds and is held together only by weaker dipole–dipole interactions.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately identified the functional group in propanoic acid as a carboxylic acid.

You accurately identified the functional group in methyl acetate as an ester.

You recognized that the two compounds have identical molecular weights and formulas.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Intermolecular Forces with Intramolecular Bonds

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated boiling as a chemical reaction that breaks covalent bonds within a molecule rather than a physical phase change that separates intact molecules from one another by overcoming intermolecular attractions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Phase Changes vs. Chemical Reactions
  • Phase transitions (boiling, melting) overcome intermolecular forces between molecules; intramolecular covalent bonds remain completely intact.

  • Always analyze the attractions between adjacent molecules (hydrogen bonding, dipole–dipole, dispersion) rather than internal covalent bond strengths when explaining boiling points.

Hydrogen-Bond Donor vs. Acceptor Motifs
  • A pure liquid can only form intermolecular hydrogen bonds if its molecules contain both a hydrogen-bond donor (−O−H\ce{-O-H}, −N−H\ce{-N-H}, or −F−H\ce{-F-H}) and an electronegative acceptor with lone pairs.

  • Check whether hydrogen is directly bonded to oxygen or nitrogen; esters have only acceptors, so pure esters cannot hydrogen-bond with each other.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that boiling vaporizes intact CX3HX6OX2\ce{C3H6O2} molecules by overcoming intermolecular forces.

  2. Identify that propanoic acid has an −O−H\ce{-O-H} group (hydrogen-bond donor) and carbonyl oxygen (acceptor), enabling extensive intermolecular hydrogen bonding and dimer formation.

  3. Identify that methyl acetate has no −O−H\ce{-O-H} group, so it cannot act as a hydrogen-bond donor to other methyl acetate molecules.

  4. Conclude that methyl acetate is held together primarily by weaker dipole–dipole attractions, which require much less thermal energy (57∘C57^\circ\text{C}) to overcome than the strong hydrogen bonds of propanoic acid (141∘C141^\circ\text{C}).

Final answer

(a) Compound A is a carboxylic acid; Compound B is an ester. (b) Propanoic acid contains an −O−H\ce{-O-H} donor and =O\ce{=O} acceptor, allowing strong intermolecular hydrogen-bonded dimers that require 141∘C141^\circ\text{C} to overcome. Methyl acetate lacks an −O−H\ce{-O-H} donor and interacts only via weaker dipole–dipole forces, yielding a much lower boiling point (57∘C57^\circ\text{C}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental difference between intramolecular covalent bonds and intermolecular forces during phase changes.

  • Practice classifying molecules as hydrogen-bond donors, hydrogen-bond acceptors, or both in pure liquid samples.

Lock it in

Similar question

01

Propanal (CHX3CHX2CHO\ce{CH3CH2CHO}, molar mass 58.08 g/mol58.08\text{ g/mol}) boils at 49∘C49^\circ\text{C}, while 1-propanol (CHX3CHX2CHX2OH\ce{CH3CH2CH2OH}, molar mass 60.10 g/mol60.10\text{ g/mol}) boils at 97∘C97^\circ\text{C}. Identify the functional group in each and explain the boiling point difference using intermolecular forces.

Answer

Propanal contains an aldehyde group (−CHO\ce{-CHO}); 1-propanol contains an alcohol group (−OH\ce{-OH}). Propanol possesses an O−H\ce{O-H} hydrogen-bond donor and an oxygen acceptor, forming strong intermolecular hydrogen bonds. Propanal has a polar carbonyl group resulting in dipole–dipole attractions, but lacks an O−H\ce{O-H} donor to form hydrogen bonds with itself, thus boiling at a much lower temperature.

02

Consider methyl formate (HCOOCHX3\ce{HCOOCH3}) and acetic acid (CHX3COOH\ce{CH3COOH}), both with the molecular formula CX2HX4OX2\ce{C2H4O2}. (a) Identify the functional group of each compound. (b) Predict which compound has the higher boiling point and specify all types of intermolecular forces present in a pure liquid sample of each.

Answer

(a) Methyl formate is an ester; acetic acid is a carboxylic acid. (b) Acetic acid has the higher boiling point (118∘C118^\circ\text{C} vs. 32∘C32^\circ\text{C}). Pure acetic acid experiences London dispersion, dipole–dipole, and strong intermolecular hydrogen bonding (forming dimers). Pure methyl formate experiences London dispersion and dipole–dipole interactions, but cannot hydrogen-bond with itself.

03

Dimethyl ether (CHX3OCHX3\ce{CH3OCH3}, boiling point −24∘C-24^\circ\text{C}) and ethanol (CHX3CHX2OH\ce{CH3CH2OH}, boiling point 78∘C78^\circ\text{C}) are constitutional isomers. Dimethyl ether readily dissolves in water with high solubility. Explain why dimethyl ether cannot hydrogen-bond with itself in pure liquid, yet dissolves readily in water through hydrogen bonding.

Answer

In pure dimethyl ether, all hydrogen atoms are bonded to carbon (C−H\ce{C-H}), so it lacks a hydrogen-bond donor (O−H\ce{O-H}); it only possesses hydrogen-bond acceptor sites (the lone pairs on oxygen). Therefore, pure dimethyl ether molecules only interact via dipole–dipole and dispersion forces. However, water molecules provide O−H\ce{O-H} donors, allowing the ether oxygen's lone pairs to accept strong hydrogen bonds from water (RX2O⋯H−OH\ce{R2O\cdots H-OH}), driving its high water solubility.

Loading workspace…