Resources
In a collegiate analytical chemistry laboratory, a student determines the degree of covalent versus ionic bonding in potassium hydrogen phthalate (, , molar mass ) by standardizing a sodium hydroxide solution via titrimetric analysis. A pure primary standard sample of weighing is dissolved in of deionized water and titrated to the phenolphthalein endpoint, requiring of solution. (a) Calculate the standardized molarity of the solution. (b) Within the hydrogen phthalate anion (), identify the types of chemical bonds present, distinguishing between the bonding holding the potassium cation to the phthalate group versus the intramolecular bonding within the phthalate skeleton itself. (c) In the titration reaction, the hydroxide ion abstracts the carboxylic proton from . Explain this reaction in terms of coordinate covalent bond cleavage and formation: specify which covalent bond is heterolytically cleaved and which new covalent bond is formed in the product .
Answer and steps
Final answer
(a) Moles of . Because the stoichiometric ratio is , . (b) The bond between and is ionic (electrostatic attraction between distinct ions), whereas all intramolecular bonds within the hydrogen phthalate anion (the aromatic , , , , , and bonds) are polar and nonpolar covalent bonds formed through localized and delocalized electron pair sharing. (c) The polar covalent bond of the carboxylic acid group undergoes heterolytic cleavage, where both bonding electrons remain on the oxygen atom to form a resonance-stabilized carboxylate ion (). Simultaneously, an unshared lone pair on the hydroxide oxygen () is donated to form a new polar covalent bond with the transferred proton (), yielding a neutral molecule.
Steps
Part (a): Standardized Molarity of the Solution
- Calculate the moles of the primary standard : The molar mass of potassium hydrogen phthalate () is .
- Determine the moles of reacted: Potassium hydrogen phthalate acts as a monoprotic weak acid in this titration, reacting with sodium hydroxide in an equimolar stoichiometric ratio: Therefore:
- Compute the molar concentration of : Convert the titration volume from milliliters to liters:
Part (b): Classification of Chemical Bonding in Potassium Hydrogen Phthalate
- Inter-ionic bonding ( to ): The potassium atom completely transfers its valence electron to the phthalate moiety, forming a positively charged potassium ion () and a mono-negative hydrogen phthalate anion (). The attraction between them is a non-directional, electrostatic ionic bond.
-
Intramolecular bonding within : All atoms within the hydrogen phthalate polyatomic anion are held together by covalent bonds arising from orbital overlap and shared pairs of valence electrons:
- Aromatic ring: Delocalized and localized and bonds, along with nonpolar covalent bonds.
- Carboxylic acid and carboxylate groups: Polar covalent , , and bonds formed through unequal sharing of electron pairs due to electronegativity differences between carbon, oxygen, and hydrogen.
Part (c): Proton Transfer, Heterolytic Cleavage, and Bond Formation
-
Heterolytic Bond Cleavage:
- In the carboxylic acid group (), the oxygen atom is significantly more electronegative than hydrogen.
- During the acid-base neutralization, the polar covalent single bond undergoes heterolytic cleavage: both electrons of the shared pair remain entirely with the oxygen atom.
- This leaves the hydrogen as a bare proton () and generates a fully deprotonated, resonance-stabilized phthalate dianion carrying an extra lone pair on the carboxylate oxygen ().
-
Coordinate Covalent Bond Formation:
- The incoming hydroxide ion () acts as a Lewis base. It provides a non-bonding lone pair of electrons from its oxygen atom to bond with the electron-deficient proton (), which acts as a Lewis acid.
- This donation forms a new polar covalent bond, resulting in the neutral water molecule ().
Typical errors
01 The student uses the volume of water used to dissolve KHP instead of the titrant volume of NaOH to calculate molarity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
To find the molarity of the titrant solution (), you must divide the moles of by the volume of solution dispensed from the buret (), not the volume of water used to dissolve the solid ().
- Step 3
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the moles of potassium hydrogen phthalate from its sample mass.
You correctly applied the acid-base stoichiometry between and .
You accurately classified both the inter-ionic and intramolecular covalent bonding.
You correctly identified the heterolytic bond cleavage and coordinate bond formation in the neutralization reaction.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the volume of water used to dissolve the solid sample () into the titrant molarity equation instead of the volume delivered from the buret ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the analyte flask dissolution volume with the titrant delivery volume when standardizing a solution. The dissolution water only serves as a solvent to ionize the analyte; the molarity of the titrant in the buret depends strictly on the titrant volume required to reach the equivalence point.
REASONING PATH
Your ACEpath teacher’s suggested approach- Molarity of Titrant vs. Analyte
Always verify whose concentration you are computing. If standardizing , divide by the buret volume of , never the flask volume of water.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the titrant volume: .
Calculate concentration: .
(a) ; (b) Ionic between and , covalent within ; (c) Carboxylic undergoes heterolytic cleavage, and a new polar covalent bond forms in via lone pair donation from .
02 The student misidentifies the bonding between potassium and the phthalate group as a covalent bond instead of an ionic interaction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
The bonding holding K to the phthalate group is a polar covalent K-O bond. The intramolecular bonds within the phthalate skeleton are covalent C-C, C-H, and C-O bonds.
CorrectThe bond between and is an ionic bond (electrostatic attraction between ions), whereas the intramolecular bonds within the phthalate anion (, , , , , and ) are polar and nonpolar covalent bonds.
Potassium is an alkali metal with very low electronegativity (), while oxygen has high electronegativity (). The large electronegativity difference leads to complete valence electron transfer, producing a cation and a resonance-stabilized mono-negative phthalate anion held together by non-directional ionic electrostatic forces, not electron-sharing covalent bonds.
- Step 3
The carboxylic O-H bond is cleaved heterolytically. A new covalent bond forms between the oxygen of OH- and H+ to produce H2O.
WHAT YOU DID WELL
Compliments from Your TeacherYou performed the stoichiometric calculations and unit conversions flawlessly to find the molarity of the sodium hydroxide solution.
You correctly classified the intramolecular bonds within the organic backbone as covalent.
You correctly identified the heterolytic bond cleavage of the acidic proton and the subsequent bond formation yielding water.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the metal-carboxylate interaction as a localized shared electron pair (polar covalent) instead of recognizing that salts of alkali metals with polyatomic organic acids are ionic compounds composed of separated ions.
REASONING PATH
Your ACEpath teacher’s suggested approach- Metal vs. Nonmetal Bonding in Polyatomic Salts
When an alkali metal (Group 1, such as or ) combines with an oxyanion or polyatomic organic anion, the interaction is ionic, while the internal framework of the polyatomic anion is held together by covalent bonds.
Always separate the salt into its discrete cation (e.g., ) and polyatomic anion before analyzing the bonding. Classify the inter-ion connection as ionic and save covalent descriptions for bonds between nonmetals within the anion.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that potassium hydrogen phthalate is an ionic salt: .
Assign the interaction holding to as an electrostatic ionic bond.
Assign all intramolecular bonds within (, , , , , ) as covalent bonds formed by shared electron pairs.
(a) ; (b) The potassium ion is bonded to the hydrogen phthalate anion via an ionic bond, while the intramolecular bonds within the phthalate skeleton are covalent bonds; (c) The carboxylic bond undergoes heterolytic cleavage, and a new polar covalent bond forms between the lone pair of and to yield .
03 The student confuses heterolytic cleavage with homolytic cleavage, asserting that each fragment receives one electron.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The carboxylic bond undergoes heterolytic cleavage, where both bonding electrons stay on the oxygen atom to yield a carboxylate anion (), while the hydroxide lone pair coordinates to the released proton () to form a new covalent bond in .
Acid-base proton transfers involve ions, not free radicals. The bond undergoes heterolytic cleavage (both electrons go to the oxygen atom), transferring a bare proton rather than a neutral hydrogen radical.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the moles of KHP and the resulting molarity of the NaOH solution.
You clearly distinguished between the inter-ionic attraction and the intramolecular covalent bonds within the polyatomic ion.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo arithmetic slips occurred; your numerical and unit conversions in part (a) were executed cleanly.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused homolytic cleavage (equal splitting of two electrons into neutral radicals) with heterolytic cleavage (unequal splitting where the more electronegative atom retains both electrons to generate ions). Acid-base neutralization reactions are two-electron ionic processes, so no radicals are formed.
REASONING PATH
Your ACEpath teacher’s suggested approach- Distinguishing bond cleavage modes
Heterolytic cleavage distributes the shared electron pair unequally (typically to the more electronegative atom, forming ions). Homolytic cleavage splits the electron pair equally (one electron to each atom, forming radicals).
Whenever analyzing Brønsted acid-base or Lewis acid-base reactions, track electron pairs: the bond breaks heterolytically to produce ions ( and ).
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that the carboxylic acid bond is polar covalent, with oxygen being significantly more electronegative than hydrogen.
During deprotonation by hydroxide, the bond cleaves heterolytically: both shared electrons remain on the oxygen atom, generating a carboxylate anion ().
The lone pair from the hydroxide ion () is donated to the departing proton () via coordinate covalent bonding to form neutral .
(a) ; (b) Ionic between and , covalent within ; (c) The carboxylic bond breaks heterolytically (both electrons go to oxygen to form ), and a lone pair from forms a new polar covalent bond in .
Lock it in
In a titration standardization, does adding extra deionized water to dissolve the solid primary standard alter the calculated concentration of the titrant?
No. Water changes the analyte solution volume, but the moles of standard remain constant, and titrant molarity depends solely on the buret volume dispensed.
Similar question
A student standardizes a solution using potassium hydrogen phthalate (, molar mass ). A sample of is dissolved in of water. Titration to the phenolphthalein endpoint requires of . Calculate the molarity of the solution.
Answer
. Since and react , . Volume of titrant . Thus, .
In a standardization experiment, a student dissolves of in of water. During titration, an additional of deionized water is used to rinse the inner walls of the Erlenmeyer flask. The endpoint is reached at a buret reading of of . Calculate and explain why the rinse water does not affect the result.
Answer
. Volume of . . The rinse water adds volume to the flask but does not introduce or consume analyte moles, leaving the required buret titrant volume unchanged.
A diprotic solid acid, oxalic acid dihydrate (, molar mass ), is used to standardize . A sample is dissolved in of water and requires of to reach the second equivalence point. Calculate the standardized molarity of .
Answer
. Because the acid is diprotic (), . Volume of . Therefore, .