Resources

Consider the behavior of an ultra-high vacuum (UHV) chamber of volume V=0.0500 m3V = 0.0500\text{ m}^3 evacuated to an extreme low-pressure limit of P=1.00×10−10 TorrP = 1.00\times 10^{-10}\text{ Torr} at T=298 KT = 298\text{ K}, containing residual nitrogen molecules (N2\text{N}_2, effective collision diameter d=3.75×10−10 md = 3.75\times 10^{-10}\text{ m}). (a) Calculate the total number of N2\text{N}_2 molecules remaining in the chamber. (b) Using the Kinetic Molecular Theory formula for mean free path, λ=kBT2πd2P\lambda = \frac{k_B T}{\sqrt{2}\pi d^2 P}, calculate the mean free path λ\lambda in kilometers. (c) In this asymptotic limit, identify whether intermolecular collisions or molecule-wall collisions dominate particle trajectory.

Answer and steps

Final answer

(a) N=1.62×1011 moleculesN = 1.62\times 10^{11}\text{ molecules}; (b) Mean free path λ=4.98×103 km\lambda = 4.98\times 10^3\text{ km}; (c) Molecule-wall collisions completely dominate (the mean free path is over 10710^7 times larger than the chamber dimensions, meaning molecules travel in straight lines directly from wall to wall without striking other gas molecules).

Steps

Part (a): Number of Residual Molecules

To determine the number of residual NX2\ce{N2} molecules, apply the ideal gas law in terms of molecular count:

PV=NkBT  ⟹  N=PVkBTP V = N k_B T \implies N = \frac{P V}{k_B T}

  1. Convert pressure to SI units (Pa\text{Pa}): 1 Torr=101 325760 Pa≈133.322 Pa1\text{ Torr} = \frac{101\,325}{760}\text{ Pa} \approx 133.322\text{ Pa} P=(1.00×10−10 Torr)×(133.322 Pa⋅Torr−1)≈1.333×10−8 PaP = (1.00\times 10^{-10}\text{ Torr})\times (133.322\text{ Pa}\cdot\text{Torr}^{-1}) \approx 1.333\times 10^{-8}\text{ Pa}
  2. Substitute values into the expression:

    • Boltzmann constant: kB=1.381×10−23 J⋅K−1k_B = 1.381\times 10^{-23}\text{ J}\cdot\text{K}^{-1}
    • Temperature: T=298 KT = 298\text{ K}
    • Volume: V=0.0500 m3V = 0.0500\text{ m}^3

    N=(1.333×10−8 N⋅m−2)(0.0500 m3)(1.381×10−23 J⋅K−1)(298 K)=6.666×10−104.115×10−21≈1.62×1011 moleculesN = \frac{(1.333\times 10^{-8}\text{ N}\cdot\text{m}^{-2})(0.0500\text{ m}^3)}{(1.381\times 10^{-23}\text{ J}\cdot\text{K}^{-1})(298\text{ K})} = \frac{6.666\times 10^{-10}}{4.115\times 10^{-21}} \approx 1.62\times 10^{11}\text{ molecules}


Part (b): Mean Free Path Calculation

The mean free path λ\lambda represents the average distance a molecule travels between successive intermolecular collisions. According to the Kinetic Molecular Theory:

λ=kBT2πd2P\lambda = \frac{k_B T}{\sqrt{2}\pi d^2 P}

  1. Calculate the effective collision cross section:

    • Effective collision diameter: d=3.75×10−10 md = 3.75\times 10^{-10}\text{ m}
    • Collision cross-section factor: 2πd2=2⋅π⋅(3.75×10−10 m)2≈6.25×10−19 m2\sqrt{2}\pi d^2 = \sqrt{2}\cdot \pi \cdot (3.75\times 10^{-10}\text{ m})^2 \approx 6.25\times 10^{-19}\text{ m}^2
  2. Evaluate the mean free path: λ=kBT2πd2P=4.115×10−21 J(6.25×10−19 m2)(1.333×10−8 Pa)≈4.98×106 m\lambda = \frac{k_B T}{\sqrt{2}\pi d^2 P} = \frac{4.115\times 10^{-21}\text{ J}}{(6.25\times 10^{-19}\text{ m}^2)(1.333\times 10^{-8}\text{ Pa})} \approx 4.98\times 10^6\text{ m}
  3. Convert to kilometers: λ=4.98×106 m103 m⋅km−1=4.98×103 km\lambda = \frac{4.98\times 10^6\text{ m}}{10^3\text{ m}\cdot\text{km}^{-1}} = 4.98\times 10^3\text{ km}

Common Pitfall: Always convert pressure from Torr into Pascals (N⋅m−2\text{N}\cdot\text{m}^{-2}) before substituting into kinetic theory equations, as the Boltzmann constant kBk_B is expressed in SI base units (J⋅K−1=N⋅m⋅K−1\text{J}\cdot\text{K}^{-1} = \text{N}\cdot\text{m}\cdot\text{K}^{-1}).


Part (c): Dominant Collision Type

To determine whether intermolecular or molecule-wall collisions govern particle behavior:

  1. Estimate chamber dimensions: Assuming a roughly cubic geometry for the chamber: L≈V1/3=(0.0500 m3)1/3≈0.368 mL \approx V^{1/3} = (0.0500\text{ m}^3)^{1/3} \approx 0.368\text{ m}
  2. Compare λ\lambda to chamber size: λL≈4.98×106 m0.368 m≈1.35×107\frac{\lambda}{L} \approx \frac{4.98\times 10^6\text{ m}}{0.368\text{ m}} \approx 1.35\times 10^7

Because the mean free path is over 10710^7 times greater than the physical dimensions of the container (Knudsen number Kn=λ/L≫1\text{Kn} = \lambda / L \gg 1), gas-phase molecules virtually never encounter each other. Instead, each molecule travels ballistically in straight lines directly from one wall to another. Therefore, molecule-wall collisions completely dominate particle trajectory.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student directly uses the pressure value in Torr without converting it to Pascals, leading to an incorrect number of molecules and mean free path.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N=PVkBT  ⟹  N=1.00×10−10×0.05001.3806×10−23×298=1.22×1012 moleculesN = \frac{PV}{k_B T} \implies N = \frac{1.00\times 10^{-10}\times 0.0500}{1.3806\times 10^{-23}\times 298} = 1.22\times 10^{12}\text{ molecules}

    Correct

    P=1.00×10−10 Torr×101 325 Pa760 Torr≈1.333×10−8 Pa  ⟹  N=(1.333×10−8 Pa)(0.0500 m3)(1.381×10−23 J⋅K−1)(298 K)≈1.62×1011 moleculesP = 1.00\times 10^{-10}\text{ Torr} \times \frac{101\,325\text{ Pa}}{760\text{ Torr}} \approx 1.333\times 10^{-8}\text{ Pa} \implies N = \frac{(1.333\times 10^{-8}\text{ Pa})(0.0500\text{ m}^3)}{(1.381\times 10^{-23}\text{ J}\cdot\text{K}^{-1})(298\text{ K})} \approx 1.62\times 10^{11}\text{ molecules}

    You set up the correct formula N=PVkBTN = \frac{PV}{k_B T}, but you substituted pressure directly as 1.00×10−101.00\times 10^{-10} in Torr\text{Torr}. Because the Boltzmann constant kBk_B is in J⋅K−1\text{J}\cdot\text{K}^{-1} (where 1 J=1 N⋅m=1 Pa⋅m31\text{ J} = 1\text{ N}\cdot\text{m} = 1\text{ Pa}\cdot\text{m}^3), pressure must be converted to Pa\text{Pa} (1.333×10−8 Pa1.333\times 10^{-8}\text{ Pa}).

  2. Step 2

    λ=kBT2πd2P  ⟹  λ=1.3806×10−23×2982×π×(3.75×10−10)2×1.00×10−10  ⟹  λ=65700 m=65.7 km\lambda = \frac{k_B T}{\sqrt{2}\pi d^2 P} \implies \lambda = \frac{1.3806\times 10^{-23}\times 298}{\sqrt{2}\times \pi \times (3.75\times 10^{-10})^2 \times 1.00\times 10^{-10}} \implies \lambda = 65700\text{ m} = 65.7\text{ km}

    Correct

    λ=(1.381×10−23 J⋅K−1)(298 K)2π(3.75×10−10 m)2(1.333×10−8 Pa)≈4.98×106 m=4.98×103 km\lambda = \frac{(1.381\times 10^{-23}\text{ J}\cdot\text{K}^{-1})(298\text{ K})}{\sqrt{2}\pi (3.75\times 10^{-10}\text{ m})^2 (1.333\times 10^{-8}\text{ Pa})} \approx 4.98\times 10^6\text{ m} = 4.98\times 10^3\text{ km}

    You used the correct kinetic theory formula for the mean free path, but you again substituted pressure in Torr\text{Torr} rather than Pa\text{Pa}, and you also made an exponent calculation slip during evaluation.

  3. Step 3

    Molecule - wall collisions dominate because λ is much larger than chamber size.\text{Molecule - wall collisions dominate because } \lambda \text{ is much larger than chamber size.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and rearranged the molecular ideal gas law PV=NkBTPV = Nk_B T.

You chose the exact Kinetic Molecular Theory formula for the mean free path.

You correctly identified that molecule-wall collisions dominate in the molecular flow regime when λ\lambda far exceeds the container dimensions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

You substituted the pressure value directly in Torr instead of converting it into Pascals.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the given pressure value as compatible with SI base equations without checking that constants such as kBk_B require pressure in Pascals (N⋅m−2\text{N}\cdot\text{m}^{-2}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check SI Compatibility of Pressure
  • Whenever using kB=1.381×10−23 J⋅K−1k_B = 1.381\times 10^{-23}\text{ J}\cdot\text{K}^{-1} or R=8.314 J⋅mol−1⋅K−1R = 8.314\text{ J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}, pressure must be expressed in Pascals (Pa=N⋅m−2=J⋅m−3\text{Pa} = \text{N}\cdot\text{m}^{-2} = \text{J}\cdot\text{m}^{-3}).

  • Multiply pressure in Torr\text{Torr} by 101 325 Pa760 Torr≈133.322 Pa⋅Torr−1\frac{101\,325\text{ Pa}}{760\text{ Torr}} \approx 133.322\text{ Pa}\cdot\text{Torr}^{-1} before substituting.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert pressure to Pascals: P=1.00×10−10 Torr×133.322 Pa⋅Torr−1=1.333×10−8 PaP = 1.00\times 10^{-10}\text{ Torr} \times 133.322\text{ Pa}\cdot\text{Torr}^{-1} = 1.333\times 10^{-8}\text{ Pa}.

  2. Calculate part (a): N=PVkBT=(1.333×10−8 Pa)(0.0500 m3)(1.381×10−23 J⋅K−1)(298 K)≈1.62×1011 moleculesN = \frac{PV}{k_B T} = \frac{(1.333\times 10^{-8}\text{ Pa})(0.0500\text{ m}^3)}{(1.381\times 10^{-23}\text{ J}\cdot\text{K}^{-1})(298\text{ K})} \approx 1.62\times 10^{11}\text{ molecules}.

  3. Calculate part (b): λ=kBT2πd2P=4.115×10−21 J(2π)(3.75×10−10 m)2(1.333×10−8 Pa)≈4.98×106 m=4.98×103 km\lambda = \frac{k_B T}{\sqrt{2}\pi d^2 P} = \frac{4.115\times 10^{-21}\text{ J}}{(\sqrt{2}\pi)(3.75\times 10^{-10}\text{ m})^2(1.333\times 10^{-8}\text{ Pa})} \approx 4.98\times 10^6\text{ m} = 4.98\times 10^3\text{ km}.

Final answer

(a) N=1.62×1011 moleculesN = 1.62\times 10^{11}\text{ molecules}; (b) λ=4.98×103 km\lambda = 4.98\times 10^3\text{ km}; (c) Molecule-wall collisions completely dominate.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down unit cancellation explicitly for equations containing kBk_B or RR before entering numbers into your calculator.

  • Memorize the standard conversion factor: 1 Torr=101 325760 Pa≈133.32 Pa1\text{ Torr} = \frac{101\,325}{760}\text{ Pa} \approx 133.32\text{ Pa}.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the collision diameter d in the denominator of the mean free path formula, yielding an incorrect mean free path.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=1.00×10−10×(101325760)=1.333×10−8 Pa  ⟹  N=PVkBT=1.333×10−8×0.05001.3806×10−23×298=1.62×1011 moleculesP = 1.00\times 10^{-10}\times\left(\frac{101325}{760}\right) = 1.333\times 10^{-8}\text{ Pa} \implies N = \frac{PV}{k_B T} = \frac{1.333\times 10^{-8}\times 0.0500}{1.3806\times 10^{-23}\times 298} = 1.62\times 10^{11}\text{ molecules}

  2. Step 2

    λ=kBT2πdP=1.3806×10−23×2982×π×3.75×10−10×1.333×10−8=1.85×10−4 m=1.85×10−7 km\lambda = \frac{k_B T}{\sqrt{2}\pi d P} = \frac{1.3806\times 10^{-23}\times 298}{\sqrt{2}\times\pi\times 3.75\times 10^{-10}\times 1.333\times 10^{-8}} = 1.85\times 10^{-4}\text{ m} = 1.85\times 10^{-7}\text{ km}

    Correct

    λ=kBT2πd2P=1.381×10−23×2982π(3.75×10−10)2(1.333×10−8)=4.98×106 m=4.98×103 km\lambda = \frac{k_B T}{\sqrt{2}\pi d^2 P} = \frac{1.381\times 10^{-23}\times 298}{\sqrt{2}\pi (3.75\times 10^{-10})^2 (1.333\times 10^{-8})} = 4.98\times 10^6\text{ m} = 4.98\times 10^3\text{ km}

    You omitted the exponent 22 on the collision diameter dd in the denominator. The collision cross-section requires the area πd2\pi d^2, not the diameter dd. Without squaring dd, the units do not resolve to length and the resulting mean free path is off by ten orders of magnitude.

  3. Step 3

    Intermolecular collisions dominate because the mean free path is extremely small compared to the chamber dimensions.

    Correct

    Molecule-wall collisions completely dominate because λ≈4.98×103 km\lambda \approx 4.98\times 10^3\text{ km} is over 10710^7 times larger than the characteristic chamber dimension (L≈0.37 mL \approx 0.37\text{ m}).

    Your reasoning followed logically from your calculated value of λ\lambda, but because that value was incorrect due to the missing square in Step 2, your final physical conclusion was reversed. In ultra-high vacuum, molecules travel thousands of kilometers between collisions, so they almost exclusively hit the chamber walls.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the pressure from Torr to SI units (Pascals).

You set up the ideal gas equation N=PVkBTN = \frac{PV}{k_B T} and calculated the total particle count accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Transcription Error (Missing Exponent)

You wrote dd instead of d2d^2 in the denominator of the mean free path formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the geometric origin of collision cross-section (which represents an effective collision area σ=πd2\sigma = \pi d^2) led to omitting the square on the diameter dd and failing to verify dimensional consistency.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cross-Sectional Area Check
  • Collisions depend on the target area swept out by a molecule, σ=πd2\sigma = \pi d^2, which has units of m2\text{m}^2.

  • Always check that the collision diameter is squared (d2d^2) in the denominator of kinetic collision equations.

Dimensional Analysis
  • In λ=kBT2πd2P\lambda = \frac{k_B T}{\sqrt{2}\pi d^2 P}, the numerator has units of energy (J=N⋅m\text{J} = \text{N}\cdot\text{m}), and the denominator has units of m2⋅(N⋅m−2)=N\text{m}^2 \cdot (\text{N}\cdot\text{m}^{-2}) = \text{N}, yielding meters (m\text{m}).

  • Perform a unit check on your formula before calculating to catch missing powers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the denominator with d2d^2: 2πd2P=2π(3.75×10−10 m)2(1.333×10−8 Pa)≈8.26×10−27 N\sqrt{2}\pi d^2 P = \sqrt{2}\pi (3.75\times 10^{-10}\text{ m})^2 (1.333\times 10^{-8}\text{ Pa}) \approx 8.26\times 10^{-27}\text{ N}.

  2. Evaluate λ\lambda: λ=4.115×10−21 J8.26×10−27 N≈4.98×106 m\lambda = \frac{4.115\times 10^{-21}\text{ J}}{8.26\times 10^{-27}\text{ N}} \approx 4.98\times 10^6\text{ m}.

  3. Convert to kilometers: λ=4.98×103 km\lambda = 4.98\times 10^3\text{ km}.

  4. Compare λ\lambda with the container dimension L≈V1/3=(0.0500 m3)1/3≈0.368 mL \approx V^{1/3} = (0.0500\text{ m}^3)^{1/3} \approx 0.368\text{ m}: since λ≫L\lambda \gg L, molecules travel straight to the container walls without encountering other gas molecules.

Final answer

(a) N=1.62×1011 moleculesN = 1.62\times 10^{11}\text{ molecules}; (b) λ=4.98×103 km\lambda = 4.98\times 10^3\text{ km}; (c) Molecule-wall collisions completely dominate.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of mean free path to connect the collision cylinder volume πd2vΔt\pi d^2 v \Delta t to the appearance of d2d^2.

  • Practice checking SI base units whenever evaluating formulas involving the Boltzmann constant kBk_B and pressure PP.

OverviewACEpath Teacher's Diagnosis

03 The student concludes that intermolecular collisions dominate because low pressure is mistakenly thought to mean molecules only hit each other rather than the walls.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=1.00×10−10×(101325760)=1.333×10−8 Pa  ⟹  N=1.333×10−8×0.05001.3806×10−23×298=1.62×1011 moleculesP = 1.00\times 10^{-10}\times\left(\frac{101325}{760}\right) = 1.333\times 10^{-8}\text{ Pa} \implies N = \frac{1.333\times 10^{-8}\times 0.0500}{1.3806\times 10^{-23}\times 298} = 1.62\times 10^{11}\text{ molecules}

  2. Step 2

    λ=1.3806×10−23×2982×π×(3.75×10−10)2×1.333×10−8  ⟹  λ=4.93×105 m=493 km\lambda = \frac{1.3806\times 10^{-23}\times 298}{\sqrt{2}\times \pi\times (3.75\times 10^{-10})^2\times 1.333\times 10^{-8}} \implies \lambda = 4.93\times 10^5\text{ m} = 493\text{ km}

    Correct

    λ=kBT2πd2P=4.114×10−21 J8.26×10−27 N≈4.98×106 m=4.98×103 km\lambda = \frac{k_B T}{\sqrt{2}\pi d^2 P} = \frac{4.114\times 10^{-21}\text{ J}}{8.26\times 10^{-27}\text{ N}} \approx 4.98\times 10^6\text{ m} = 4.98\times 10^3\text{ km}

    You substituted the correct physical values into the mean free path formula, but you made a power-of-ten calculation error: 10−2110−27=106\frac{10^{-21}}{10^{-27}} = 10^6, giving approximately 4.94×106 m4.94\times 10^6\text{ m} (4.94×103 km4.94\times 10^3\text{ km}), not 105 m10^5\text{ m}.

  3. Step 3

    Intermolecular collisions dominate because the extremely low pressure prevents molecules from reaching the walls.\text{Intermolecular collisions dominate because the extremely low pressure prevents molecules from reaching the walls.}

    Correct

    Molecule-wall collisions dominate because λ≫L (mean free path is thousands of kilometers, vastly exceeding chamber dimensions).\text{Molecule-wall collisions dominate because }\lambda \gg L\text{ (mean free path is thousands of kilometers, vastly exceeding chamber dimensions).}

    In an ultra-high vacuum, the molecular density is so low that the mean free path between intermolecular collisions is thousands of kilometers. Because the chamber is only a fraction of a meter across, molecules travel in straight lines and strike the chamber walls repeatedly without ever encountering another gas molecule.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted Torr to pascals accurately using the standard conversion factor.

You applied the ideal gas equation in terms of molecular count to find the total remaining molecules.

You correctly recalled and set up the kinetic theory formula for mean free path.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misunderstanding of the Knudsen / Molecular Flow Regime

You miscalculated the powers of ten in the denominator of the mean free path calculation, resulting in 105 m10^5\text{ m} instead of 106 m10^6\text{ m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You misunderstood the physical meaning of low pressure and mean free path: low pressure corresponds to extremely sparse particles, making intermolecular collisions virtually nonexistent and causing particle trajectories to be entirely dominated by collisions with the container walls.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Exponents in Denominators
  • When dividing scientific notation, evaluate (10−a)/(10−b×10−c)=10−a−(−b−c)(10^{-a}) / (10^{-b} \times 10^{-c}) = 10^{-a - (-b - c)}.

  • Separate the mantissas from the exponents before computing to avoid losing an order of magnitude.

Compare Mean Free Path to Container Size
  • Knudsen number Kn=λL\text{Kn} = \frac{\lambda}{L}. If Kn≫1\text{Kn} \gg 1, molecules collide almost exclusively with container walls (molecular flow regime). If Kn≪1\text{Kn} \ll 1, intermolecular collisions dominate (viscous/continuum regime).

  • Whenever λ\lambda is much larger than the chamber length LL, conclude that molecule-wall collisions dominate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the numerator: kBT=(1.381×10−23 J⋅K−1)(298 K)=4.115×10−21 Jk_B T = (1.381\times 10^{-23}\text{ J}\cdot\text{K}^{-1})(298\text{ K}) = 4.115\times 10^{-21}\text{ J}.

  2. Evaluate the denominator: 2πd2P=2π(3.75×10−10 m)2(1.333×10−8 Pa)≈8.263×10−27 N\sqrt{2}\pi d^2 P = \sqrt{2}\pi (3.75\times 10^{-10}\text{ m})^2 (1.333\times 10^{-8}\text{ Pa}) \approx 8.263\times 10^{-27}\text{ N}.

  3. Compute the quotient: λ=4.115×10−218.263×10−27=4.98×106 m=4.98×103 km\lambda = \frac{4.115\times 10^{-21}}{8.263\times 10^{-27}} = 4.98\times 10^6\text{ m} = 4.98\times 10^3\text{ km}.

  4. Compare λ\lambda to the chamber size L≈V1/3=(0.0500 m3)1/3≈0.37 mL \approx V^{1/3} = (0.0500\text{ m}^3)^{1/3} \approx 0.37\text{ m}. Since λ≫L\lambda \gg L, gas molecules travel ballistically from wall to wall without hitting other molecules, so molecule-wall collisions completely dominate.

Final answer

(a) N=1.62×1011 moleculesN = 1.62\times 10^{11}\text{ molecules}; (b) λ=4.98×103 km\lambda = 4.98\times 10^3\text{ km}; (c) Molecule-wall collisions completely dominate.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice computing multi-exponent scientific notation step by step to eliminate power-of-ten calculation slips.

  • Review the Knudsen number definition and the physical transition from viscous flow (continuum) to molecular flow.

Lock it in

Similar question

01

A 2.00 L2.00\text{ L} vacuum chamber is evacuated to P=5.00×10−7 TorrP = 5.00\times 10^{-7}\text{ Torr} at T=300 KT = 300\text{ K}. Calculate the number of gas molecules remaining in the chamber.

Answer

P=(5.00×10−7 Torr)(133.322 Pa/Torr)=6.666×10−5 PaP = (5.00\times 10^{-7}\text{ Torr})(133.322\text{ Pa}/\text{Torr}) = 6.666\times 10^{-5}\text{ Pa}. Volume V=2.00×10−3 m3V = 2.00\times 10^{-3}\text{ m}^3. Using N=PVkBT=(6.666×10−5 Pa)(2.00×10−3 m3)(1.381×10−23 J⋅K−1)(300 K)N = \frac{PV}{k_B T} = \frac{(6.666\times 10^{-5}\text{ Pa})(2.00\times 10^{-3}\text{ m}^3)}{(1.381\times 10^{-23}\text{ J}\cdot\text{K}^{-1})(300\text{ K})}, we find N≈3.22×1013 moleculesN \approx 3.22\times 10^{13}\text{ molecules}.

02

At 298 K298\text{ K} and P=1.00×10−4 PaP = 1.00\times 10^{-4}\text{ Pa}, argon gas has an effective molecular diameter of d=3.60×10−10 md = 3.60\times 10^{-10}\text{ m}. Calculate the mean free path λ\lambda in meters.

Answer

Effective collision cross section: σ=2πd2=2π(3.60×10−10 m)2≈5.76×10−19 m2\sigma = \sqrt{2}\pi d^2 = \sqrt{2}\pi (3.60\times 10^{-10}\text{ m})^2 \approx 5.76\times 10^{-19}\text{ m}^2. Mean free path: λ=kBT2πd2P=(1.381×10−23 J⋅K−1)(298 K)(5.76×10−19 m2)(1.00×10−4 Pa)≈71.4 m\lambda = \frac{k_B T}{\sqrt{2}\pi d^2 P} = \frac{(1.381\times 10^{-23}\text{ J}\cdot\text{K}^{-1})(298\text{ K})}{(5.76\times 10^{-19}\text{ m}^2)(1.00\times 10^{-4}\text{ Pa})} \approx 71.4\text{ m}.

03

A cylindrical tube of diameter D=0.10 mD = 0.10\text{ m} contains helium (d=2.20×10−10 md = 2.20\times 10^{-10}\text{ m}) at T=300 KT = 300\text{ K}. Find the maximum pressure in Torr\text{Torr} at which the gas enters the molecular flow regime (defined by Knudsen number Kn=λ/D≥1\text{Kn} = \lambda / D \ge 1).

Answer

For Kn≥1\text{Kn} \ge 1, we require λ≥D=0.10 m\lambda \ge D = 0.10\text{ m}. Rearranging λ=kBT2πd2P\lambda = \frac{k_B T}{\sqrt{2}\pi d^2 P} gives P≤kBT2πd2D=(1.381×10−23)(300)2π(2.20×10−10)2(0.10)≈0.193 PaP \le \frac{k_B T}{\sqrt{2}\pi d^2 D} = \frac{(1.381\times 10^{-23})(300)}{\sqrt{2}\pi (2.20\times 10^{-10})^2 (0.10)} \approx 0.193\text{ Pa}. Converting to Torr\text{Torr}: P≤0.193 Pa133.322 Pa/Torr≈1.45×10−3 TorrP \le \frac{0.193\text{ Pa}}{133.322\text{ Pa}/\text{Torr}} \approx 1.45\times 10^{-3}\text{ Torr}.

Loading workspace…