Resources

Students frequently confuse the electrical sign conventions of electrodes between galvanic and electrolytic cells. Consider two separate cells: Cell 1 is a discharging galvanic cell composed of a lead anode and a silver cathode. Cell 2 is an electrolytic cell decomposing molten MgCl2\text{MgCl}_2 into Mg(l)\text{Mg(l)} and Cl2(g)\text{Cl}_2\text{(g)} using inert graphite electrodes. (a) For Cell 1, identify the oxidation half-reaction, the reduction half-reaction, and assign the physical electrostatic polarity (++ or −-) to the anode and cathode. (b) For Cell 2, identify which electrode connects to the positive terminal of the external DC power supply, whether oxidation or reduction occurs at this positive electrode, and state its designation as anode or cathode.

Answer and steps

Final answer

(a) Cell 1 (Galvanic): Anode is negative (−-) where Pb(s)→Pb2+(aq)+2e−\text{Pb(s)} \rightarrow \text{Pb}^{2+}\text{(aq)} + 2e^-; Cathode is positive (++) where Ag+(aq)+e−→Ag(s)\text{Ag}^+\text{(aq)} + e^- \rightarrow \text{Ag(s)}; (b) Cell 2 (Electrolytic): Positive terminal connects to the anode, where oxidation occurs (2Cl−→Cl2(g)+2e−2\text{Cl}^- \rightarrow \text{Cl}_2\text{(g)} + 2e^-).

Steps

Foundational Principles of Electrochemical Cells

Across all electrochemical cells, two fundamental definitions never change:

  • Anode: The electrode where oxidation (loss of electrons) occurs.
  • Cathode: The electrode where reduction (gain of electrons) occurs.

The physical sign convention (++ or −-), however, depends on whether the cell generates electrical energy spontaneously (galvanic) or consumes external electrical energy (electrolytic).


Part (a): Cell 1 (Galvanic Cell)

A galvanic cell converts spontaneous chemical potential energy into electrical energy.

  1. Identify the Half-Reactions:

    • Oxidation at the Anode: Lead has a greater tendency to oxidize than silver. Lead metal loses electrons to enter solution: Pb(s)→PbX2+(aq)+2 eX−\ce{Pb(s) -> Pb^2+(aq) + 2e-}
    • Reduction at the Cathode: Silver ions in solution accept electrons at the surface of the silver electrode: AgX+(aq)+eX−→Ag(s)\ce{Ag+(aq) + e- -> Ag(s)}
  2. Assign Electrostatic Polarities:

    • Because spontaneous oxidation at the lead electrode releases electrons, electrons accumulate at this electrode before moving through the external wire. Therefore, the anode is the negative (−-) terminal.
    • Electrons flow through the external circuit toward the silver electrode to reduce AgX+\ce{Ag+}, leaving it electron-deficient relative to the anode. Therefore, the cathode is the positive (++) terminal.

Part (b): Cell 2 (Electrolytic Cell)

An electrolytic cell uses an external direct current (DC) power supply to drive a non-spontaneous redox reaction in molten MgClX2\ce{MgCl2}. The electrolyte contains mobile MgX2+\ce{Mg^2+} cations and ClX−\ce{Cl-} anions.

  1. Role of the External DC Power Supply:

    • The positive (++) terminal of the DC supply acts as an electron sink, pulling electrons away from the electrode connected to it.
    • Removing electrons from an electrode forces the species in contact with it to lose electrons—which is oxidation.
  2. Identify the Reaction and Electrode Designation:

    • Anions (ClX−\ce{Cl-}) migrate toward this positive electrode and are oxidized to chlorine gas: 2ClX−→ClX2(g)+2 eX−2\ce{Cl- -> Cl2(g) + 2e-}
    • Since oxidation occurs at this electrode, by definition it is the anode.
    • Thus, in an electrolytic cell, the positive terminal connects to the anode, where oxidation occurs.

Common Pitfall to Avoid

Do not memorize that "anode is always negative" or "cathode is always positive." Electrostatic polarity flips between cell types:

  • Galvanic: Anode is (−-), Cathode is (++).
  • Electrolytic: Anode is (++), Cathode is (−-). Always identify the site of oxidation first to designate the anode, and then apply the operational context (spontaneous source vs. externally driven) to determine the signs.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the electrostatic polarities of galvanic cell electrodes with electrolytic cell conventions, incorrectly assigning positive to the anode and negative to the cathode.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Oxidation: Pb(s)→Pb2+(aq)+2e−  ⟹  Reduction: Ag+(aq)+e−→Ag(s)\text{Oxidation: } \text{Pb(s)} \rightarrow \text{Pb}^{2+}\text{(aq)} + 2e^- \implies \text{Reduction: } \text{Ag}^+\text{(aq)} + e^- \rightarrow \text{Ag(s)}

  2. Step 2

    Anode polarity: +  ⟹  Cathode polarity: −\text{Anode polarity: } + \implies \text{Cathode polarity: } -

    Correct

    Anode polarity: −;Cathode polarity: +\text{Anode polarity: } -; \quad \text{Cathode polarity: } +

    In a discharging galvanic cell, spontaneous oxidation at the lead anode releases electrons, making it the electron-rich negative terminal (−-). The cathode attracts these electrons and is the positive terminal (++).

  3. Step 3

    Chloride ions are attracted to the positive terminal: 2Cl−→Cl2+2e−  ⟹  Oxidation occurs at the positive electrode  ⟹  Electrode designation: anode\text{Chloride ions are attracted to the positive terminal: } 2\text{Cl}^- \rightarrow \text{Cl}_2 + 2e^- \implies \text{Oxidation occurs at the positive electrode} \implies \text{Electrode designation: anode}

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately identified both half-reactions and matched oxidation to lead and reduction to silver.

You correctly analyzed that the positive electrode in an electrolytic cell oxidizes chloride ions and acts as the anode.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Galvanic vs Electrolytic Electrode Polarity Confusion

You applied electrolytic cell polarity conventions (where the anode is connected to the positive terminal) to a galvanic cell.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the source of electrons in galvanic vs. electrolytic cells: in a galvanic cell, spontaneous chemical oxidation generates excess electrons at the anode, giving it a negative (−-) charge, whereas in an electrolytic cell, the external power supply forces electrons away from the anode, making it positive (++).

REASONING PATH
Your ACEpath teacher’s suggested approach
Galvanic Cell Sign Rule
  • In a galvanic cell, oxidation releases electrons at the electrode, making the anode negative (−-) and the cathode positive (++).

  • Always remember that a battery's negative terminal is where electrons originate from spontaneous oxidation.

Electrolytic Cell Sign Rule
  • In an electrolytic cell, the anode connects to the positive (++) terminal of the DC power supply to pull electrons away.

  • Check whether electrical energy is being produced (galvanic: anode is −-) or consumed (electrolytic: anode is ++).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Oxidation occurs at the lead electrode: Pb(s)→Pb2+(aq)+2e−\text{Pb(s)} \rightarrow \text{Pb}^{2+}\text{(aq)} + 2e^-, releasing electrons onto the electrode surface.

  2. Because electrons accumulate here before flowing through the external circuit, the anode has negative polarity (−-).

  3. Electrons flow toward the silver cathode to reduce Ag+\text{Ag}^+, making the cathode the positive terminal (++).

Final answer

Cell 1 Anode is negative (−-) and Cathode is positive (++).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical origin of charge at electrodes: spontaneous electron source (galvanic anode = −-) vs. external electron withdrawal (electrolytic anode = ++).

  • Practice labeling cell diagrams by first writing the half-reactions and identifying electron flow direction before marking signs.

OverviewACEpath Teacher's Diagnosis

02 The student believes that the anode is universally negative across all electrochemical systems, incorrectly concluding that reduction must occur at the positive electrode of an electrolytic cell.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Oxidation: Pb(s)→PbX2+(aq)+2 eX−\ce{Pb(s) -> Pb^2+(aq) + 2e^-}, Reduction: AgX+(aq)+eX−→Ag(s)\ce{Ag+(aq) + e^- -> Ag(s)}, Anode polarity: −-, Cathode polarity: ++

  2. Step 2

    Positive terminal connects to the cathode because anodes are always negative.

    Correct

    The positive terminal connects to the anode.

    In an electrolytic cell, the external DC power supply forces electrons away from the electrode connected to its positive terminal, driving oxidation there. Because oxidation always defines the anode, the positive electrode is the anode, not the cathode.

  3. Step 3

    Reduction occurs at the positive electrode: MgX2++2 eX−→Mg  ⟹  \ce{Mg^2+ + 2e^- -> Mg} \implies Electrode designation: cathode

    Correct

    Oxidation occurs at the positive electrode: 2ClX−→ClX2(g)+2 eX−  ⟹  2\ce{Cl^- -> Cl2(g) + 2e^-} \implies Electrode designation: anode

    Because you assigned the positive electrode as the cathode in the previous step, you concluded that reduction occurred there. In reality, ClX−\ce{Cl^-} anions migrate to the positive anode and undergo oxidation to ClX2(g)\ce{Cl2(g)}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the oxidation and reduction half-reactions for Cell 1.

You assigned the proper electrostatic signs for the galvanic cell electrodes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electrode Polarity Inversion in Electrolytic Cells

You treated electrode electrostatic polarity (++ vs. −-) as a fixed property rather than remembering that it inverts between galvanic and electrolytic cells.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on the heuristic that 'anodes are always negative' rather than the invariant chemical definitions: the anode is always the site of oxidation, and the cathode is always the site of reduction. In an electrolytic cell, the positive terminal of the external DC source pulls electrons away, forcing oxidation to take place at the positive electrode.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define by Reaction First
  • Anode = oxidation (An Ox); Cathode = reduction (Red Cat). These definitions never change.

  • Always determine where oxidation and reduction take place before deciding on the electrode's name.

Differentiate Power Source vs. Spontaneous Cell
  • In galvanic cells, the anode releases electrons spontaneously (−-). In electrolytic cells, the external positive terminal pulls electrons away, making the anode (++).

  • Check whether the cell produces electricity (galvanic) or requires an external DC source (electrolytic) to set the electrostatic signs.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the action of the positive terminal: The positive (++) terminal of an external DC supply draws electrons away from the connected electrode.

  2. Identify the reaction occurring at this electrode: Removing electrons forces oxidation (2ClX−→ClX2(g)+2 eX−2\ce{Cl^- -> Cl2(g) + 2e^-}).

  3. Designate the electrode: Since oxidation occurs at this electrode, it is defined as the anode (positive polarity in an electrolytic cell).

Final answer

In Cell 2, the positive terminal connects to the anode, where oxidation of chloride ions (2ClX−→ClX2(g)+2 eX−2\ce{Cl^- -> Cl2(g) + 2e^-}) occurs.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mnemonic 'An Ox / Red Cat' to anchor anode and cathode to redox processes rather than electrical signs.

  • Practice drawing side-by-side schematics of galvanic vs. electrolytic cells, explicitly tracing electron flow relative to the power supply or voltmeter.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly associates reduction with the anode and oxidation with the cathode, reversing the fundamental definitions of the electrodes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Anode reaction: AgX+(aq)+eX−→Ag(s) (reduction)  ⟹  Cathode reaction: Pb(s)→PbX2+(aq)+2 eX− (oxidation)\text{Anode reaction: } \ce{Ag+(aq) + e- -> Ag(s)} \text{ (reduction)} \implies \text{Cathode reaction: } \ce{Pb(s) -> Pb^2+(aq) + 2e-} \text{ (oxidation)}

    Correct

    Anode (oxidation): Pb(s)→PbX2+(aq)+2 eX−;Cathode (reduction): AgX+(aq)+eX−→Ag(s)\text{Anode (oxidation): } \ce{Pb(s) -> Pb^2+(aq) + 2e-} ; \quad \text{Cathode (reduction): } \ce{Ag+(aq) + e- -> Ag(s)}

    In all electrochemical cells, oxidation occurs at the anode and reduction occurs at the cathode. Lead metal loses electrons (oxidation) and serves as the anode, while silver ions gain electrons (reduction) at the cathode.

  2. Step 2

    Anode polarity: −  ⟹  Cathode polarity: +\text{Anode polarity: } - \implies \text{Cathode polarity: } +

  3. Step 3

    Electrons are drawn into the positive terminal, so 2 ClX−→ClX2+2 eX− occurs there.  ⟹  Oxidation occurs at the positive electrode.\text{Electrons are drawn into the positive terminal, so } \ce{2Cl- -> Cl2 + 2e-} \text{ occurs there.} \implies \text{Oxidation occurs at the positive electrode.}

  4. Step 4

    Electrode designation: cathode\text{Electrode designation: cathode}

    Correct

    Electrode designation: anode\text{Electrode designation: anode}

    Because oxidation takes place at this electrode, it must be designated as the anode by definition, not the cathode.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly deduced that the positive terminal of the DC supply pulls electrons and forces oxidation of chloride ions.

You correctly stated the electrostatic signs (−- for anode, ++ for cathode) associated with a galvanic cell.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electrode Definition Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the fundamental electrochemical definitions of anode and cathode, associating reduction with the anode and oxidation with the cathode instead of remembering that oxidation is always anodic and reduction is always cathodic.

REASONING PATH
Your ACEpath teacher’s suggested approach
Universal Electrode Definitions
  • Oxidation always occurs at the anode; reduction always occurs at the cathode (mnemonic: An Ox, Red Cat).

  • Always identify where electrons are lost (oxidation →\rightarrow anode) and where electrons are gained (reduction →\rightarrow cathode) before considering electrostatic signs or cell type.

Cell Type and Sign Conventions
  • In galvanic cells, spontaneous oxidation makes the anode negative (−-) and the cathode positive (++). In electrolytic cells, the external power source forces the anode to be positive (++) and the cathode to be negative (−-).

  • Determine anode/cathode first by redox role (oxidation vs. reduction), then apply the polarity based on whether the cell supplies power or consumes external power.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that 2 ClX−→ClX2+2 eX−\ce{2Cl- -> Cl2 + 2e-} is an oxidation half-reaction.

  2. Apply the universal definition: the electrode where oxidation occurs is the anode.

  3. Conclude that the positive electrode in Cell 2 is the anode.

Final answer

(a) Cell 1 (Galvanic): Anode is negative (−-) where Pb(s)→PbX2+(aq)+2 eX−\ce{Pb(s) -> Pb^2+(aq) + 2e-}; Cathode is positive (++) where AgX+(aq)+eX−→Ag(s)\ce{Ag+(aq) + e- -> Ag(s)}. (b) Cell 2 (Electrolytic): The positive terminal connects to the anode, where oxidation occurs (2 ClX−→ClX2(g)+2 eX−\ce{2Cl- -> Cl2(g) + 2e-}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic 'An Ox and Red Cat' (Anode = Oxidation, Reduction = Cathode) so you never reverse these definitions.

  • Practice labeling electrodes by first identifying the redox process (oxidation/reduction) before assigning physical charges (++/−-).

Lock it in

Similar question

01

A Daniell cell consists of a zinc electrode dipping into ZnSO4(aq)\text{ZnSO}_4\text{(aq)} and a copper electrode dipping into CuSO4(aq)\text{CuSO}_4\text{(aq)}. Identify the anode, the cathode, and their respective polarities (++ or −-).

Answer

Zinc is more easily oxidized than copper, so oxidation occurs at the zinc electrode: Zn(s)→Zn2+(aq)+2e−\text{Zn(s)} \rightarrow \text{Zn}^{2+}\text{(aq)} + 2e^- (Anode, −-). Reduction occurs at the copper electrode: Cu2+(aq)+2e−→Cu(s)\text{Cu}^{2+}\text{(aq)} + 2e^- \rightarrow \text{Cu(s)} (Cathode, ++).

02

During the industrial electrolysis of aqueous sodium chloride (chlor-alkali process), chlorine gas is produced at one electrode while water is reduced at the other to form hydrogen gas. (a) At which electrode is Cl2\text{Cl}_2 produced (anode or cathode)? (b) What is the electrical sign of this electrode?

Answer

(a) Anode, because chloride ions lose electrons to form chlorine gas (2Cl−→Cl2+2e−2\text{Cl}^- \rightarrow \text{Cl}_2 + 2e^-, oxidation). (b) Positive (++), because in an electrolytic cell, the anode connects to the positive terminal of the power source.

03

A secondary lithium-ion cell is undergoing recharging via an external wall charger. (a) Is the cell functioning as a galvanic cell or an electrolytic cell during this process? (b) What are the electrostatic signs of its anode and cathode during recharging?

Answer

(a) Electrolytic cell, because it consumes external electrical work to drive a non-spontaneous reaction. (b) Anode is positive (++) and Cathode is negative (−-) during recharge.

Loading workspace…