Resources
Provide the systematic IUPAC name for an acyclic alkane with the condensed structural formula . Identify the principal carbon chain, number the chain to give substituents the lowest possible locants, and list all alkyl substituents in alphabetical order.
Answer and steps
Final answer
Steps
Identify the principal (longest continuous) carbon chain
To determine the systematic IUPAC name for , follow these steps:
Expand the condensed formula to see the carbon backbone clearly:
The longest continuous chain of carbon atoms contains carbons. An acyclic saturated hydrocarbon with six carbons has the root name hexane.
Number the carbon chain using the lowest locant rule
Number the principal chain from both possible directions to determine the locants (position numbers) for the substituents:
-
Numbering from left to right:
- Substituent at carbon-2: one methyl group ()
- Substituents at carbon-4: two methyl groups ()
- Set of locants:
-
Numbering from right to left:
- Substituents at carbon-3: two methyl groups ()
- Substituent at carbon-5: one methyl group ()
- Set of locants:
Key Rule (Lowest Locant at First Point of Difference):
Compare the locant sets term by term: at the very first point of difference, the first number in the left-to-right set () is lower than the first number in the right-to-left set (). Therefore, numbering from left to right is correct.Common Pitfall: Do not rely on the "lowest sum of locants" rule or place preference on the carbon with more branches (carbon-4 vs. carbon-3). IUPAC rules prioritize the lowest locant at the earliest point of comparison.
Combine substituents and the parent name
- All three substituents are identical: methyl groups ().
- Use the multiplying prefix tri- to indicate three identical groups: trimethyl.
- Prefix the locants with hyphens and commas: 2,4,4-trimethyl.
- Combine with the parent alkane name without spaces: 2,4,4-trimethylhexane.
Typical errors
01 The student numbers the parent chain from right to left instead of left to right, failing the first point of difference rule and resulting in the name 3,3,5-trimethylhexane.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Longest carbon chain: carbons (hexane)
- Step 2
Substituents: methyl groups at , , and
CorrectNumbering left-to-right gives locants vs. right-to-left ; choose because
You numbered from right to left to get . Under IUPAC rules, you must compare locant sets term by term and choose the one with the lowest number at the first point of difference: is lower than , so the correct substituent positions are .
- Step 3
IUPAC name:
CorrectYou assembled the prefixes and parent name correctly based on your assigned numbers, but the final name is affected by the numbering error in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the longest continuous carbon chain as a six-carbon chain.
You correctly identified all three substituents as methyl groups and combined them using the prefix tri-.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou likely favored carbon-3 because it has two branches instead of looking for the lowest locant at the very first point of difference.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisunderstanding the IUPAC lowest-locant rule: when choosing between numbering directions, compare the locant sets in ascending numerical order term by term until the first point of difference, rather than prioritizing a carbon with more substituents or summing the numbers.
REASONING PATH
Your ACEpath teacher’s suggested approach- First Point of Difference Rule
Compare two locant sets in increasing order: vs. . At the very first position, , which decides the correct numbering immediately.
Always write out both possible numbering sets in numerical order and compare the first non-matching number.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite out the substituents from both numbering directions: left-to-right gives and right-to-left gives .
Compare the sets at the first point of difference: , so choose .
Combine the locants with the three methyl groups to get .
Attach this prefix to the parent alkane name: .
02 The student numbers the chain based on minimizing the sum of locants rather than applying the first point of difference rule, choosing 3,3,5 because 3 + 3 + 5 = 11 while 2 + 4 + 4 = 10, or mistakenly comparing the highest locant 5 vs 4.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Under IUPAC rules, you must compare the complete locant lists in ascending order term by term until you find the first point of difference. Because is lower than at the very first comparison, the numbering wins regardless of how many substituents are located on carbon-3.
- Step 4Correct
Because you chose the incorrect numbering direction in Step 3, your final name used instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified hexane as the parent chain.
You accurately found all three methyl groups and wrote down both candidate locant sets.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou prioritized substituent density at carbon-3 over the lower initial locant at carbon-2.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou applied a 'more branches earlier' intuition rather than the standard IUPAC lowest locant rule, which compares ordered locant sets term by term ( vs ) and stops at the very first difference.
REASONING PATH
Your ACEpath teacher’s suggested approach- First Point of Difference Rule
Write both locant sets in ascending numerical order, then compare the first numbers, then the second, and so on. The set with the lower number at the earliest point of difference is correct.
Do not count total branches per carbon or add the locants together; simply compare vs starting at position 1.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the locants in ascending order for both directions: Left-to-right gives and right-to-left gives .
Compare the first locant of each set: . Because there is an immediate difference at the first term, left-to-right is chosen.
Combine the substituents with their correct locants and the parent name: .
03 The student omits the multiplying prefix tri- when naming the three identical methyl substituents, resulting in 2,4,4-methylhexane.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Parent chain: carbons (hexane)
- Step 2
Numbering: [crossed out] left to right gives locants
- Step 3
Substituents: methyl groups at
- Step 4
IUPAC name:
CorrectWhen two or more identical substituents are present, you must use a multiplying prefix (, , , etc.) to indicate how many there are. Because there are three methyl groups, the prefix must be rather than just .
WHAT YOU DID WELL
Compliments from Your TeacherYou identified the longest continuous carbon chain as six carbons (hexane).
You correctly applied the lowest-locant rule at the first point of difference to number the chain from left to right as .
You correctly identified all branches as methyl substituents.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou matched the three numerical locants directly to the root name 'methyl' without adding the Greek multiplying prefix 'tri-' required by IUPAC nomenclature for multiple identical substituents.
REASONING PATH
Your ACEpath teacher’s suggested approach- Multiplying Prefixes for Identical Groups
Every identical substituent group requires both an explicit locant number for each group and a multiplying prefix ( for , for , for ) indicating the total count.
Always count the total number of locants preceding a substituent name; the number of digits must match the numerical prefix (e.g., numbers require ).
CORRECTED PATH
ACEpath Teacher's DemonstrationCount the identical methyl substituents: there are three methyl groups located at positions , , and .
Combine the locants with commas and attach the prefix to denote three groups: .
Append the substituent prefix to the parent alkane name without spaces: .
Lock it in
What does the IUPAC 'first point of difference' rule state when choosing between two numbering directions?
Compare both sets of locants in increasing numerical order; the direction that gives the lower locant at the first differing position is correct.
Similar question
Provide the systematic IUPAC name for .
Answer
. The longest chain has carbons (pentane). Numbering from right to left gives locants , whereas left to right gives . Because , right-to-left numbering is correct.
Provide the systematic IUPAC name for .
Answer
. The parent chain is heptane ( carbons). Numbering left to right gives , while right to left gives . Since , the left-to-right numbering is chosen.
Provide the systematic IUPAC name for .
Answer
. The longest chain contains carbons (heptane). Numbering from left to right yields and right to left yields . Since both directions are completely symmetrical, the name is .