Resources

Name the binary ionic compound SnO2\text{SnO}_2 using modern IUPAC Stock nomenclature. Explain why the name 'tin oxide' or 'tin(II) oxide' is chemically incorrect by explicitly calculating the formal oxidation state of the tin cation from the known oxide charge.

Answer and steps

Final answer

Tin(IV) oxide

Steps

01

Identify the Anion and Its Known Charge

In binary metal oxides, oxygen forms the oxide anion, which consistently carries a −2-2 charge (OX2−\ce{O^2-}).

From the chemical formula SnOX2\ce{SnO2}, there are:

  • 11 tin atom (Sn\ce{Sn})
  • 22 oxygen atoms (O\ce{O})
02

Determine the Oxidation State of the Tin Cation

Because the compound is electrically neutral, the sum of the oxidation states of all atoms in the formula unit must equal zero.

Let xx represent the oxidation state of the tin cation (Sn\ce{Sn}):

x+2(−2)=0x + 2(-2) = 0

x−4=0  ⟹  x=+4x - 4 = 0 \implies x = +4

Thus, the tin cation is present as SnX4+\ce{Sn^4+}.

03

Apply IUPAC Stock Nomenclature

Under the IUPAC Stock system:

  1. Name the metal cation first: tin.
  2. Write the oxidation state of the metal as a Roman numeral enclosed in parentheses immediately after its name, without a space: (IV).
  3. Name the nonmetal anion by modifying its elemental root with the suffix -ide: oxygen becomes oxide.

Combining these components gives the systematic name: tin(IV) oxide.


Why Alternative Names Are Incorrect

  • Why "tin oxide" is incorrect: Tin (Sn\ce{Sn}) is a multivalent post-transition metal that readily forms more than one stable cation (most commonly SnX2+\ce{Sn^2+} and SnX4+\ce{Sn^4+}). Leaving out the Roman numeral creates ambiguity because "tin oxide" does not specify which compound is being referenced.
  • Why "tin(II) oxide" is incorrect: A tin(II) cation (SnX2+\ce{Sn^2+}) paired with an oxide anion (OX2−\ce{O^2-}) combines in a 1:11:1 ratio to form the neutral compound SnO\ce{SnO}, not SnOX2\ce{SnO2}. Calling SnOX2\ce{SnO2} "tin(II) oxide" misidentifies the oxidation state of tin as +2+2 instead of +4+4.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the subscript of oxygen (2) directly with the Roman numeral / oxidation state of tin, naming the compound tin(II) oxide.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Oxide has charge −2.\text{Oxide has charge } -2.

  2. Step 2

    Since the subscript on O is 2, tin must be tin(II).  ⟹  Therefore, the oxidation state of tin is +2, making tin(IV) oxide incorrect.\text{Since the subscript on O is 2, tin must be tin(II).} \implies \text{Therefore, the oxidation state of tin is } +2\text{, making tin(IV) oxide incorrect.}

    Correct

    x+2(−2)=0  ⟹  x−4=0  ⟹  x=+4x + 2(-2) = 0 \implies x - 4 = 0 \implies x = +4

    A chemical formula subscript indicates the number of atoms present, not necessarily the cation charge. In SnOX2\ce{SnO2}, there are two oxide ions providing a total negative charge of 2×(−2)=−42 \times (-2) = -4. For the formula unit to be neutral, the single tin cation must have an oxidation state of +4+4 (SnX4+\ce{Sn^4+}).

  3. Step 3

    Tin(II) oxide.\text{Tin(II) oxide.}

    Correct

    Tin(IV) oxide\text{Tin(IV) oxide}

    Because your calculated oxidation state was off, the resulting Stock Roman numeral was incorrect. With tin in the +4+4 oxidation state, the systematic IUPAC name is tin(IV) oxide.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the oxide ion has an oxidation state/charge of −2-2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Subscript-charge confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the subscript on the anion directly equals the Roman numeral (charge) of the cation. Because ionic formula subscripts are reduced to the simplest empirical ratio, you must set up an overall charge-balance equation rather than reading the cation charge straight from the anion subscript.

REASONING PATH
Your ACEpath teacher’s suggested approach
Subscripts Represent Atom Counts
  • Subscripts show the ratio of ions in the crystal lattice, not individual ionic charges.

  • Multiply each subscript by its ion's charge to find total charge contribution.

Compound Charge Neutrality
  • (count of cation×cation charge)+(count of anion×anion charge)=0(\text{count of cation} \times \text{cation charge}) + (\text{count of anion} \times \text{anion charge}) = 0.

  • For SnX1OX2\ce{Sn_1O_2}, write 1(x)+2(−2)=01(x) + 2(-2) = 0 to solve for x=+4x = +4.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the algebraic charge-neutrality equation: 1⋅(oxidation state of Sn)+2⋅(−2)=01 \cdot (\text{oxidation state of } \ce{Sn}) + 2 \cdot (-2) = 0.

  2. Solve for the oxidation state of tin: x−4=0  ⟹  x=+4x - 4 = 0 \implies x = +4.

  3. Pair the cation name and Roman numeral with the anion: SnX4+\ce{Sn^4+} is tin(IV) and OX2−\ce{O^2-} is oxide.

Final answer

Tin(IV) oxide

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the charge-neutrality equation (ncation⋅qcation)+(nanion⋅qanion)=0(n_{\text{cation}} \cdot q_{\text{cation}}) + (n_{\text{anion}} \cdot q_{\text{anion}}) = 0 before assigning Roman numerals.

  • Check whether the resulting formula unit would reduce: if tin were +2+2, tin(II) oxide would simplify to SnO\ce{SnO}, not SnOX2\ce{SnO2}.

OverviewACEpath Teacher's Diagnosis

02 The student neglects the subscript of 2 on oxygen and equates the tin cation's charge to the charge of only one oxide ion (-2), concluding tin is +2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Oxide ion has a charge of -2.

  2. Step 2

    x+(−2)=0  ⟹  x=+2x + (-2) = 0 \implies x = +2

    Correct

    x+2(−2)=0  ⟹  x−4=0  ⟹  x=+4x + 2(-2) = 0 \implies x - 4 = 0 \implies x = +4

    You set up the charge-balance equation for only one oxygen atom instead of multiplying the −2-2 charge by the subscript 22 from SnOX2\ce{SnO2}.

  3. Step 3

    Tin(II) oxide. Tin has an oxidation state of +2, so tin oxide without a numeral or tin(IV) oxide is incorrect.

    Correct

    Tin(IV) oxide. Tin has an oxidation state of +4+4, so 'tin(II) oxide' is incorrect because it describes SnO\ce{SnO}, and 'tin oxide' is ambiguous because tin is multivalent.

    Because your calculated oxidation state was off, your deduced Stock name and explanation were carried over incorrectly from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that an individual oxide ion has an oxidation number of −2-2.

You understood that the total electrical charge of a neutral binary ionic formula unit must sum to zero.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglected subscript in charge balance

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You solved for the metal cation's oxidation state by balancing against a single anion rather than multiplying the anion's charge by its chemical formula subscript.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for formula subscripts
  • Total negative charge = (number of anions)×(charge per anion)(\text{number of anions}) \times (\text{charge per anion}).

  • Always multiply the charge of the anion by its subscript before balancing the compound's overall charge to zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the formula unit as SnX1OX2\ce{Sn1O2}, which contains 11 tin atom and 22 oxygen atoms.

  2. Set up the neutrality equation: 1(x)+2(−2)=01(x) + 2(-2) = 0.

  3. Solve for xx: x−4=0  ⟹  x=+4x - 4 = 0 \implies x = +4.

  4. Write the metal name followed by its oxidation state in Roman numerals: tin(IV) oxide.

Final answer

Tin(IV) oxide

NEXT STEPS
Final Takeaways from Your Teacher
  • Circle all nonmetal subscripts in chemical formulas before writing your algebraic charge-balance equation.

  • Check that your final name's formula recovers the original formula: SnX4+\ce{Sn^4+} and OX2−\ce{O^2-} simplify in a 1:21:2 ratio to SnOX2\ce{SnO2}.

OverviewACEpath Teacher's Diagnosis

03 The student misnames the ionic compound using covalent prefix nomenclature as tin dioxide and fails to specify the required Stock Roman numeral.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Tin dioxide.

    Correct

    Tin(IV) oxide

    You used the Greek numerical prefix "di-", which is reserved for binary molecular (covalent) compounds. Because SnO2\text{SnO}_2 is a binary ionic compound containing a metal with variable oxidation states, IUPAC Stock nomenclature requires indicating the cation's oxidation state with a Roman numeral: tin(IV) oxide.

  2. Step 2

    Each O has charge -2, so 2(−2)=−42(-2) = -4   ⟹  \implies x+(−4)=0x + (-4) = 0, so tin oxidation state is +4+4.

  3. Step 3

    "Tin oxide" is incorrect because it has two oxygens, so it must be called tin dioxide instead of using Roman numerals.

    Correct

    "Tin oxide" is ambiguous because tin forms multiple cations (Sn2+\text{Sn}^{2+} and Sn4+\text{Sn}^{4+}). "Tin(II) oxide" is chemically incorrect because tin is in the +4+4 oxidation state here, whereas tin(II) oxide corresponds to the formula SnO\text{SnO}.

    You argued that Greek prefixes replace Roman numerals, which violates ionic nomenclature rules. You also omitted explaining why "tin(II) oxide" is incorrect based on your calculated +4+4 oxidation state.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly assigned a −2-2 charge to each oxide anion.

You set up and solved an accurate charge-neutrality equation to find the +4+4 oxidation state for tin.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Nomenclature system confusion

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied covalent naming conventions (Greek prefixes like 'di-') to a binary ionic compound instead of using IUPAC Stock Roman numerals to specify the oxidation state of a multivalent metal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metal vs. Nonmetal Classification
  • Binary compounds formed between a metal and a nonmetal are ionic; never use Greek numerical prefixes (mono-, di-, tri-) to name them.

  • Check whether the first element is a metal. Since tin (Sn\text{Sn}) is a metal, use ionic naming rules.

Stock Roman Numeral Placement
  • For metals that can adopt more than one oxidation state, write the cation's oxidation state as a Roman numeral in parentheses right after the metal's name: metal(oxidation state) anion-ide.

  • Convert the calculated +4+4 oxidation state directly into Roman numeral (IV) to form 'tin(IV) oxide'.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Combine the metal name and its Roman numeral oxidation state: tin(IV).

  2. Append the base name of the nonmetal ending in -ide: oxide, giving 'tin(IV) oxide'.

  3. Explain that 'tin oxide' is ambiguous because tin can be +2+2 or +4+4, and 'tin(II) oxide' is incorrect because tin has an oxidation state of +4+4 in SnO2\text{SnO}_2 (tin(II) oxide is SnO\text{SnO}).

Final answer

Tin(IV) oxide

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between binary ionic nomenclature (Stock system) and covalent molecular nomenclature (Greek prefix system).

  • Practice naming transition metal and post-transition metal oxides using Roman numerals derived from charge balancing.

Lock it in

Similar question

01

Name the ionic compound PbO\ce{PbO} using IUPAC Stock nomenclature.

Answer

Lead(II) oxide. Key step: x+1(−2)=0  ⟹  x=+2x + 1(-2) = 0 \implies x = +2, giving lead(II).

02

Determine the oxidation state of titanium in TiOX2\ce{TiO2} and provide its systematic IUPAC name.

Answer

Titanium(IV) oxide. Key step: x+2(−2)=0  ⟹  x=+4x + 2(-2) = 0 \implies x = +4, so titanium carries a +4+4 charge.

03

A student names FeX2OX3\ce{Fe2O3} iron(III) oxide and FeO\ce{FeO} iron(I) oxide. Explain which name is correct, which is incorrect, and state the correct name for the incorrect one.

Answer

Iron(III) oxide is correct because 2(+3)+3(−2)=02(+3) + 3(-2) = 0. Iron(I) oxide is incorrect because the 1:11:1 ratio with OX2−\ce{O^2-} requires x+(−2)=0  ⟹  x=+2x + (-2) = 0 \implies x = +2. The correct name for FeO\ce{FeO} is iron(II) oxide.

Loading workspace…