Resources

Examine the extreme thermodynamic limit of the liquid-gas coexistence boundary approaching the critical point for sulfur hexafluoride (SF6\text{SF}_6), which occurs at Tc=318.7 KT_c = 318.7\text{ K} (45.55∘C45.55^\circ\text{C}) and Pc=37.6 atmP_c = 37.6\text{ atm}. (a) State the asymptotic limit of the molar enthalpy of vaporization, lim⁡T→Tc−ΔHvap\lim_{T \to T_c^-} \Delta H_{\text{vap}}, and the difference in molar volumes between liquid and gas, lim⁡T→Tc−(Vm,gas−Vm,liquid)\lim_{T \to T_c^-} (V_{\text{m,gas}} - V_{\text{m,liquid}}). (b) If a sample of SF6\text{SF}_6 is maintained at T=330.0 KT = 330.0\text{ K} and compressed from P=30.0 atmP = 30.0\text{ atm} to P=50.0 atmP = 50.0\text{ atm}, describe the observation regarding phase boundaries and whether distinct meniscus formation occurs.

Answer and steps

Final answer

(a) lim⁡T→Tc−ΔHvap=0 kJ/mol\lim_{T \to T_c^-} \Delta H_{\text{vap}} = 0\text{ kJ/mol} and lim⁡T→Tc−(Vm,gas−Vm,liquid)=0 m3/mol\lim_{T \to T_c^-} (V_{\text{m,gas}} - V_{\text{m,liquid}}) = 0\text{ m}^3/\text{mol}; (b) The sample enters the supercritical fluid region without crossing a phase boundary; no phase boundary or meniscus appears at any point during compression.

Steps

Part (a): Thermodynamic Limits Approaching the Critical Point

  1. Behavior along the liquid-gas coexistence curve: As temperature increases toward the critical temperature TcT_c along the liquid-vapor saturation curve:

    • The liquid phase expands due to thermal motion, causing its density ρliquid\rho_{\text{liquid}} to decrease and its molar volume Vm,liquidV_{\text{m,liquid}} to increase.
    • The equilibrium vapor pressure rises rapidly, compressing the saturated vapor phase, which increases its density ρgas\rho_{\text{gas}} and decreases its molar volume Vm,gasV_{\text{m,gas}}.
  2. Molar volume difference at the critical point: At the critical point (T=TcT = T_c, P=PcP = P_c), the physical properties of the liquid and vapor phases become indistinguishable. Thus, the difference in molar volumes vanishes: lim⁡T→Tc−(Vm,gas−Vm,liquid)=0 m3/mol\lim_{T \to T_c^-} (V_{\text{m,gas}} - V_{\text{m,liquid}}) = 0\text{ m}^3/\text{mol}
  3. Molar enthalpy of vaporization: The molar enthalpy of vaporization, ΔHvap\Delta H_{\text{vap}}, represents the energetic cost to transition molecules from the intermolecularly bound liquid state to the vapor state. Since the two phases merge into a single homogeneous fluid state at TcT_c, no latent heat is required to transition between them: lim⁡T→Tc−ΔHvap=0 kJ/mol\lim_{T \to T_c^-} \Delta H_{\text{vap}} = 0\text{ kJ/mol}

Part (b): Compression Above the Critical Temperature

  1. Locating the thermodynamic state:

    • Critical temperature of SFX6\ce{SF6}: Tc=318.7 KT_c = 318.7\text{ K}
    • Critical pressure of SFX6\ce{SF6}: Pc=37.6 atmP_c = 37.6\text{ atm}
    • Experimental conditions: T=330.0 KT = 330.0\text{ K}, compressed from P=30.0 atmP = 30.0\text{ atm} to P=50.0 atmP = 50.0\text{ atm}.
  2. Absence of a phase boundary: Because the operating temperature T=330.0 KT = 330.0\text{ K} is strictly greater than the critical temperature TcT_c (330.0 K>318.7 K330.0\text{ K} > 318.7\text{ K}), the system is in the supercritical fluid regime.

    • The coexistence curve terminates abruptly at the critical point; no first-order phase boundary extends into the region where T>TcT > T_c.
    • As the pressure increases from below PcP_c (30.0 atm30.0\text{ atm}) to above PcP_c (50.0 atm50.0\text{ atm}), the fluid's density increases continuously from a gas-like density to a liquid-like density.
  3. Visual observation: A meniscus (liquid-gas interface) only exists when two distinct phases coexist with a non-zero surface tension between them. Because the fluid remains a single homogeneous phase throughout the isothermal compression, no phase boundary or meniscus appears at any point.

Common Pitfall: Increasing the pressure of a gas above PcP_c does not cause condensation into a distinct liquid if T>TcT > T_c. Liquefaction with a visible liquid-gas interface is impossible above the critical temperature, regardless of the applied pressure.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses crossing the critical pressure Pc at supercritical temperature with a conventional liquid-gas phase transition, concluding that a meniscus appears.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    lim⁡(T→Tc−)ΔHvap=0  ⟹  lim⁡(T→Tc−)(Vm,gas−Vm,liquid)=0\lim_{(T \to T_c^-)} \Delta H_{\text{vap}} = 0 \implies \lim_{(T \to T_c^-)} (V_{\text{m,gas}} - V_{\text{m,liquid}}) = 0

  2. Step 2

    T=330.0 K>318.7 K  ⟹  Pc=37.6 atm  ⟹  P increases from 30.0 atm to 50.0 atm, crossing Pc=37.6 atmT = 330.0\text{ K} > 318.7\text{ K} \implies P_c = 37.6\text{ atm} \implies P\text{ increases from } 30.0\text{ atm to } 50.0\text{ atm, crossing } P_c = 37.6\text{ atm}

  3. Step 3

    A gas-liquid phase transition occurs at 37.6 atm, so a distinct meniscus forms.\text{A gas-liquid phase transition occurs at } 37.6\text{ atm, so a distinct meniscus forms.}

    Correct

    The fluid remains in the supercritical regime throughout compression; density increases continuously, so no phase boundary or meniscus appears at any point.

    The liquid-gas coexistence curve terminates at the critical point (Tc,Pc)(T_c, P_c). For any temperature T>TcT > T_c, there is no coexistence curve to cross, regardless of pressure. Therefore, no phase transition occurs and no meniscus can form.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated both asymptotic limits at the critical point for Part (a).

You correctly identified that the working temperature of 330.0 K330.0\text{ K} exceeds the critical temperature of 318.7 K318.7\text{ K}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Supercritical phase boundary misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the critical pressure PcP_c as an active phase transition boundary when T>TcT > T_c, overlooking the fact that the liquid-gas coexistence curve ends completely at the critical point.

REASONING PATH
Your ACEpath teacher’s suggested approach
Termination of the Coexistence Curve
  • The liquid-vapor coexistence line ends at the critical point (Tc,Pc)(T_c, P_c). At temperatures T>TcT > T_c, no first-order liquid-gas boundary exists.

  • Check whether T>TcT > T_c before looking at pressure. If T>TcT > T_c, the sample is in the supercritical fluid region and cannot undergo a liquid-gas phase transition upon compression.

Condition for Meniscus Formation
  • A visible meniscus requires two distinct phases in contact with non-zero surface tension at equilibrium.

  • Since supercritical fluid density changes continuously without separating into two distinct phases, never predict a meniscus when T>TcT > T_c.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Observe that T=330.0 K>Tc=318.7 KT = 330.0\text{ K} > T_c = 318.7\text{ K}, meaning the system is entirely in the supercritical fluid regime.

  2. Because the liquid-gas coexistence curve terminates at (Tc,Pc)(T_c, P_c), compressing the fluid from 30.0 atm30.0\text{ atm} to 50.0 atm50.0\text{ atm} does not cross any coexistence line.

  3. The fluid transitions continuously from gas-like density to liquid-like density without phase separation, so no meniscus or phase boundary appears.

Final answer

(a) lim⁡T→Tc−ΔHvap=0 kJ/mol\lim_{T \to T_c^-} \Delta H_{\text{vap}} = 0\text{ kJ/mol} and lim⁡T→Tc−(Vm,gas−Vm,liquid)=0 m3/mol\lim_{T \to T_c^-} (V_{\text{m,gas}} - V_{\text{m,liquid}}) = 0\text{ m}^3/\text{mol}; (b) The sample remains a supercritical fluid throughout the process; no phase boundary or meniscus appears at any point during compression.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review phase diagrams to visualize where the liquid-gas coexistence boundary terminates at the critical point.

  • Practice identifying the supercritical fluid region and tracing isothermal paths where T>TcT > T_c.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the vanishing of volume difference at the critical point as the gas volume collapsing to zero rather than becoming identical to the liquid volume.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    lim⁡T→Tc−ΔHvap=0\lim_{T \to T_c^-} \Delta H_{\text{vap}} = 0

  2. Step 2

    Vm,gas approaches 0  ⟹  lim⁡T→Tc−(Vm,gas−Vm,liquid)=−Vm,liquidV_{\text{m,gas}}\text{ approaches } 0 \implies \lim_{T \to T_c^-} (V_{\text{m,gas}} - V_{\text{m,liquid}}) = -V_{\text{m,liquid}}

    Correct

    lim⁡T→Tc−(Vm,gas−Vm,liquid)=0 m3/mol\lim_{T \to T_c^-} (V_{\text{m,gas}} - V_{\text{m,liquid}}) = 0\text{ m}^3/\text{mol}

    At the critical point, the liquid and vapor phases merge into a single homogeneous fluid where their densities and molar volumes become identical (Vm,gas=Vm,liquid=Vm,cV_{\text{m,gas}} = V_{\text{m,liquid}} = V_{\text{m,c}}). The gas molar volume does not collapse to zero; rather, the difference between the two molar volumes vanishes.

  3. Step 3

    T=330.0 K>Tc=318.7 K  ⟹  SF6 remains a supercritical fluid with continuous density change, so no meniscus forms.T = 330.0\text{ K} > T_c = 318.7\text{ K} \implies \text{SF}_6\text{ remains a supercritical fluid with continuous density change, so no meniscus forms.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly concluded that the latent heat of vaporization approaches zero at the critical point.

You accurately identified that maintaining a temperature above TcT_c places the system in the supercritical regime, preventing meniscus formation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Critical Point Phase Merging vs. Volume Collapse

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the vanishing difference in phase properties at the critical point as a mathematical collapse of gas volume to zero, overlooking the physical fact that both liquid and gas molar volumes converge to a finite critical molar volume Vm,cV_{\text{m,c}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Phase Convergence at the Critical Point
  • At the liquid-gas critical point (Tc,PcT_c, P_c), liquid and gas densities become identical: ρliquid=ρgas=ρc\rho_{\text{liquid}} = \rho_{\text{gas}} = \rho_c, and Vm,liquid=Vm,gas=Vm,c>0V_{\text{m,liquid}} = V_{\text{m,gas}} = V_{\text{m,c}} > 0.

  • Evaluate the difference (Vm,gas−Vm,liquid)(V_{\text{m,gas}} - V_{\text{m,liquid}}) by setting Vm,gas→Vm,cV_{\text{m,gas}} \to V_{\text{m,c}} and Vm,liquid→Vm,cV_{\text{m,liquid}} \to V_{\text{m,c}}, which yields zero without either volume vanishing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that approaching TcT_c along the coexistence line causes Vm,liquidV_{\text{m,liquid}} to expand and Vm,gasV_{\text{m,gas}} to contract until both equal the critical molar volume Vm,cV_{\text{m,c}}.

  2. Calculate the limiting difference: lim⁡T→Tc−(Vm,gas−Vm,liquid)=Vm,c−Vm,c=0 m3/mol\lim_{T \to T_c^-} (V_{\text{m,gas}} - V_{\text{m,liquid}}) = V_{\text{m,c}} - V_{\text{m,c}} = 0\text{ m}^3/\text{mol}.

Final answer

(a) lim⁡T→Tc−ΔHvap=0 kJ/mol\lim_{T \to T_c^-} \Delta H_{\text{vap}} = 0\text{ kJ/mol} and lim⁡T→Tc−(Vm,gas−Vm,liquid)=0 m3/mol\lim_{T \to T_c^-} (V_{\text{m,gas}} - V_{\text{m,liquid}}) = 0\text{ m}^3/\text{mol}; (b) The sample enters the supercritical fluid region without crossing a phase boundary; no phase boundary or meniscus appears at any point during compression.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how molar volume and density curves for coexisting liquid and vapor meet at the critical point on a temperature-density coexistence diagram.

  • Practice identifying the difference between intensive properties converging to each other versus approaching zero at a critical endpoint.

Lock it in

Similar question

01

Carbon dioxide has Tc=304.1 KT_c = 304.1\text{ K} and Pc=72.8 atmP_c = 72.8\text{ atm}. A viewing cell containing COX2\ce{CO2} at T=295.0 KT = 295.0\text{ K} is compressed from 50.0 atm50.0\text{ atm} to 80.0 atm80.0\text{ atm}. Describe whether a meniscus appears, disappears, or is crossed during this compression.

Answer

A phase boundary is crossed and condensation occurs: because T=295.0 K<TcT = 295.0\text{ K} < T_c, compressing across the vapor pressure curve causes gas to condense into liquid, displaying a distinct liquid-gas meniscus during coexistence.

02

A sample of water (Tc=647.1 KT_c = 647.1\text{ K}, Pc=217.7 atmP_c = 217.7\text{ atm}) is held at T=655.0 KT = 655.0\text{ K}. It is compressed isothermally from 150.0 atm150.0\text{ atm} to 300.0 atm300.0\text{ atm}. State the phase of water at the start and end of this process, and explain whether a latent heat of transition is released.

Answer

The water begins and ends as a supercritical fluid. No latent heat is released because no first-order phase boundary exists at T>TcT > T_c; the density increases continuously.

03

In a high-pressure view cell, liquid and vapor SFX6\ce{SF6} coexist at equilibrium at 300.0 K300.0\text{ K}. The cell is sealed at constant total volume and heated until T=325.0 KT = 325.0\text{ K}. Describe what happens to the meniscus as the temperature passes through Tc=318.7 KT_c = 318.7\text{ K}.

Answer

As T→TcT \to T_c, the density difference between liquid and vapor diminishes, the meniscus flattens as surface tension drops to zero, critical opalescence may be observed, and the meniscus completely disappears at TcT_c, leaving a single homogeneous supercritical phase for T>TcT > T_c.

Loading workspace…