Resources

A student designs a two-part electrochemical setup. First, a galvanic cell operates under standard conditions at 298 K298\text{ K} based on the spontaneous reaction 2Ag+(aq)+Ni(s)→2Ag(s)+Ni2+(aq)2\text{Ag}^+\text{(aq)} + \text{Ni(s)} \rightarrow 2\text{Ag(s)} + \text{Ni}^{2+}\text{(aq)} [E∘(Ag+/Ag)=+0.80 VE^\circ(\text{Ag}^+/\text{Ag}) = +0.80\text{ V}, E∘(Ni2+/Ni)=−0.26 VE^\circ(\text{Ni}^{2+}/\text{Ni}) = -0.26\text{ V}]. The electrical output from this galvanic cell drives an external electrolytic cell containing 500.0 mL500.0\text{ mL} of 0.400 M Cd(NO3)2(aq)0.400\text{ M }\text{Cd(NO}_3\text{)}_2\text{(aq)}, where cadmium is reduced onto an inert platinum cathode: Cd2+(aq)+2e−→Cd(s)\text{Cd}^{2+}\text{(aq)} + 2e^- \rightarrow \text{Cd(s)}. If the galvanic cell supplies a constant current of 1.80 A1.80\text{ A} for 45.0 minutes45.0\text{ minutes}, calculate: (a) the standard potential Ecell∘E^\circ_{\text{cell}} generated by the galvanic power source, and (b) the theoretical mass of Cd(s)\text{Cd(s)} deposited in the electrolytic cell (molar mass of Cd=112.41 g/mol\text{Cd} = 112.41\text{ g/mol}, F=96485 C/mol e−F = 96485\text{ C/mol }e^-).

Answer and steps

Final answer

(a) Ecell∘=+1.06 VE^\circ_{\text{cell}} = +1.06\text{ V}; (b) Mass of Cd(s)=2.83 g\text{Cd(s)} = 2.83\text{ g}.

Steps

Part (a): Standard Potential of the Galvanic Cell

  1. Identify the half-reactions and their standard reduction potentials:

    • Cathode (Reduction): Silver ions gain electrons to form solid silver. AgX+(aq)+e−→Ag(s)(Ecathode∘=+0.80 V)\ce{Ag+(aq)} + e^- \rightarrow \ce{Ag(s)} \quad (E^\circ_{\text{cathode}} = +0.80\text{ V})
    • Anode (Oxidation): Solid nickel loses electrons to form nickel ions. Ni(s)→NiX2+(aq)+2e−(Eanode∘=−0.26 V)\ce{Ni(s)} \rightarrow \ce{Ni^2+(aq)} + 2e^- \quad (E^\circ_{\text{anode}} = -0.26\text{ V})
  2. Calculate the standard cell potential (Ecell∘E^\circ_{\text{cell}}): Using the standard reduction potential formula Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}: Ecell∘=(+0.80 V)−(−0.26 V)=+1.06 VE^\circ_{\text{cell}} = (+0.80\text{ V}) - (-0.26\text{ V}) = +1.06\text{ V}

    Pitfall to avoid: Do not multiply the standard reduction potential by the stoichiometric coefficient (2 for AgX+\ce{Ag+}) when balancing the reaction; standard electrode potential is an intensive property.


Part (b): Theoretical Mass of Cd(s)\ce{Cd(s)} Deposited

  1. Calculate the total electric charge passed through the electrolytic cell: Convert the operating time into seconds: t=45.0 min×60 s1 min=2700 st = 45.0\text{ min} \times \frac{60\text{ s}}{1\text{ min}} = 2700\text{ s}

    Calculate total charge QQ using Q=I⋅tQ = I \cdot t: Q=1.80 A×2700 s=4860 CQ = 1.80\text{ A} \times 2700\text{ s} = 4860\text{ C}

  2. Determine the moles of electrons transferred: Using Faraday's constant (F=96485 C/mol e−F = 96485\text{ C/mol }e^-): ne−=QF=4860 C96485 C/mol e−≈0.05037 mol e−n_{e^-} = \frac{Q}{F} = \frac{4860\text{ C}}{96485\text{ C/mol }e^-} \approx 0.05037\text{ mol }e^-
  3. Calculate the moles and mass of Cd(s)\ce{Cd(s)} deposited: The half-reaction at the cathode of the electrolytic cell requires 22 moles of electrons per mole of cadmium deposited: CdX2+(aq)+2e−→Cd(s)\ce{Cd^2+(aq)} + 2e^- \rightarrow \ce{Cd(s)}

    nCd=ne−2=0.05037 mol2≈0.025185 moln_{\ce{Cd}} = \frac{n_{e^-}}{2} = \frac{0.05037\text{ mol}}{2} \approx 0.025185\text{ mol}

    (Note: The initial amount of CdX2+\ce{Cd^2+} is 0.5000 L×0.400 M=0.200 mol0.5000\text{ L} \times 0.400\text{ M} = 0.200\text{ mol}, confirming that CdX2+\ce{Cd^2+} is in excess and not limiting).

    Multiply by the molar mass of cadmium (M=112.41 g/molM = 112.41\text{ g/mol}): Mass of Cd=0.025185 mol×112.41 g/mol≈2.83 g\text{Mass of }\ce{Cd} = 0.025185\text{ mol} \times 112.41\text{ g/mol} \approx 2.83\text{ g}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert time from minutes to seconds when calculating total charge, underestimating the mass of deposited cadmium by a factor of 60.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ecell∘=Ecathode∘−Eanode∘  ⟹  Ecell∘=0.80 V−(−0.26 V)=+1.06 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} \implies E^\circ_{\text{cell}} = 0.80\text{ V} - (-0.26\text{ V}) = +1.06\text{ V}

  2. Step 2

    Q=I×t=1.80 A×45.0 min=81.0 CQ = I \times t = 1.80\text{ A} \times 45.0\text{ min} = 81.0\text{ C}

    Correct

    Q=I×t=1.80 A×(45.0 min×60 s/min)=1.80 A×2700 s=4860 CQ = I \times t = 1.80\text{ A} \times (45.0\text{ min} \times 60\text{ s/min}) = 1.80\text{ A} \times 2700\text{ s} = 4860\text{ C}

    An ampere is defined as one coulomb per second (A=C/s\text{A} = \text{C}/\text{s}). Time must be converted from minutes to seconds before multiplying by current.

  3. Step 3

    n(e−)=81.0 C96485 C/mol=8.395×10−4 moln(e^-) = \frac{81.0\text{ C}}{96485\text{ C/mol}} = 8.395 \times 10^{-4}\text{ mol}

    Correct

    ne−=4860 C96485 C/mol e−≈0.05037 mol e−n_{e^-} = \frac{4860\text{ C}}{96485\text{ C/mol }e^-} \approx 0.05037\text{ mol }e^-

    Your formula and division by Faraday's constant were logically sound, but the result is off by a factor of 6060 due to the earlier unconverted time unit.

  4. Step 4

    n(Cd)=8.395×10−4 mol2=4.198×10−4 mol  ⟹  mass of Cd=4.198×10−4 mol×112.41 g/mol=0.0472 gn(\text{Cd}) = \frac{8.395 \times 10^{-4}\text{ mol}}{2} = 4.198 \times 10^{-4}\text{ mol} \implies \text{mass of Cd} = 4.198 \times 10^{-4}\text{ mol} \times 112.41\text{ g/mol} = 0.0472\text{ g}

    Correct

    nCd=0.05037 mol e−2≈0.02519 mol  ⟹  m=0.02519 mol×112.41 g/mol≈2.83 gn_{\text{Cd}} = \frac{0.05037\text{ mol }e^-}{2} \approx 0.02519\text{ mol} \implies m = 0.02519\text{ mol} \times 112.41\text{ g/mol} \approx 2.83\text{ g}

    You correctly recognized that reducing Cd2+\text{Cd}^{2+} requires 2 mol e−2\text{ mol }e^- per mole of Cd\text{Cd} and multiplied by the correct molar mass, but the numerical answer inherits the missing factor of 6060.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the standard galvanic cell potential using Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}}.

You correctly related charge to moles of electrons using Faraday's constant.

You applied the correct 2:12:1 electron-to-cadmium stoichiometry from the cathode reduction half-reaction.

You accurately converted moles of cadmium to mass using its molar mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error in Electrolysis Time

You entered time directly as 45.0 min45.0\text{ min} into Q=I⋅tQ = I \cdot t instead of converting minutes to seconds.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that the SI unit of electric current (ampere) is coulombs per second (C⋅s−1\text{C}\cdot\text{s}^{-1}), requiring time to always be expressed in seconds when computing charge Q=I⋅tQ = I \cdot t.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Unit Consistency in $Q = I \cdot t$
  • 1 A=1 C/s1\text{ A} = 1\text{ C}/\text{s}, so time tt must be in seconds.

  • Always write out unit factors explicitly: t=(time in min)×60 s/mint = (\text{time in min}) \times 60\text{ s/min} before calculating QQ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. t=45.0 min×60 s/min=2700 st = 45.0\text{ min} \times 60\text{ s/min} = 2700\text{ s}

  2. Q=1.80 A×2700 s=4860 CQ = 1.80\text{ A} \times 2700\text{ s} = 4860\text{ C}

  3. ne−=4860 C96485 C/mol e−≈0.05037 mol e−n_{e^-} = \frac{4860\text{ C}}{96485\text{ C/mol }e^-} \approx 0.05037\text{ mol }e^-

  4. nCd=0.05037 mol e−2≈0.025185 moln_{\text{Cd}} = \frac{0.05037\text{ mol }e^-}{2} \approx 0.025185\text{ mol}

  5. Mass of Cd=0.025185 mol×112.41 g/mol≈2.83 g\text{Mass of Cd} = 0.025185\text{ mol} \times 112.41\text{ g/mol} \approx 2.83\text{ g}

Final answer

(a) Ecell∘=+1.06 VE^\circ_{\text{cell}} = +1.06\text{ V}; (b) Mass of Cd(s)=2.83 g\text{Cd(s)} = 2.83\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before multiplying current by time, check that time has been converted to seconds.

  • Perform a quick magnitude sanity check: a current near 2 A2\text{ A} flowing for nearly an hour yields thousands of coulombs, not dozens.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies the standard reduction potential of silver by its stoichiometric coefficient of 2 from the balanced equation, incorrectly calculating the cell potential.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ecell∘=2×E∘(Ag+/Ag)−E∘(Ni2+/Ni)  ⟹  Ecell∘=2×(0.80 V)−(−0.26 V)=+1.86 VE^\circ_{\text{cell}} = 2 \times E^\circ(\text{Ag}^+/\text{Ag}) - E^\circ(\text{Ni}^{2+}/\text{Ni}) \implies E^\circ_{\text{cell}} = 2 \times (0.80\text{ V}) - (-0.26\text{ V}) = +1.86\text{ V}

    Correct

    Ecell∘=E∘(Ag+/Ag)−E∘(Ni2+/Ni)=(+0.80 V)−(−0.26 V)=+1.06 VE^\circ_{\text{cell}} = E^\circ(\text{Ag}^+/\text{Ag}) - E^\circ(\text{Ni}^{2+}/\text{Ni}) = (+0.80\text{ V}) - (-0.26\text{ V}) = +1.06\text{ V}

    You multiplied the silver reduction potential by 22. Standard reduction potentials (E∘E^\circ) represent voltage (energy per unit charge, J/C\text{J/C}) and are intensive properties, meaning their values do not scale with stoichiometric coefficients.

  2. Step 2

    t=45.0×60 s=2700 s  ⟹  Q=1.80 A×2700 s=4860 Ct = 45.0 \times 60\text{ s} = 2700\text{ s} \implies Q = 1.80\text{ A} \times 2700\text{ s} = 4860\text{ C}

  3. Step 3

    n(e−)=4860 C96485 C/mol=0.05037 mol  ⟹  n(Cd)=0.05037 mol2=0.02519 moln(e^-) = \frac{4860\text{ C}}{96485\text{ C/mol}} = 0.05037\text{ mol} \implies n(\text{Cd}) = \frac{0.05037\text{ mol}}{2} = 0.02519\text{ mol}

  4. Step 4

    mass of Cd=0.02519 mol×112.41 g/mol=2.83 g\text{mass of Cd} = 0.02519\text{ mol} \times 112.41\text{ g/mol} = 2.83\text{ g}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the cathode and anode half-reactions for the galvanic cell.

You accurately converted operating time to seconds and computed total charge with Q=I⋅tQ = I \cdot t.

You properly applied Faraday's constant to determine the moles of transferred electrons.

You correctly used the 2:12:1 stoichiometric mole ratio to find moles and mass of deposited cadmium.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Multiplied Standard Potential by Stoichiometric Coefficient

You treated standard reduction potential as an extensive quantity like enthalpy or Gibbs free energy rather than an intensive voltage.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing extensive thermodynamic quantities (such as ΔG∘\Delta G^\circ and ΔH∘\Delta H^\circ, which scale with the reaction equation's stoichiometric coefficients) with cell potential (E∘=−ΔG∘/nFE^\circ = -\Delta G^\circ / nF). Because both ΔG∘\Delta G^\circ and the number of moles of electrons nn scale by the exact same factor, their ratio E∘E^\circ remains constant.

REASONING PATH
Your ACEpath teacher’s suggested approach
Intensive vs. Extensive Properties
  • Standard cell potentials (E∘E^\circ) are intensive quantities measured in volts (joules per coulomb). Never multiply E∘E^\circ by stoichiometric multipliers.

  • When balancing half-reactions to find overall cell potential, leave Ecathode∘E^\circ_{\text{cathode}} and Eanode∘E^\circ_{\text{anode}} completely unchanged.

Standard Cell Potential Formula
  • Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} where both values are standard reduction potentials.

  • Directly subtract the reduction potential of the species oxidized at the anode from that of the species reduced at the cathode.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify reduction half-reaction: Ag++e−→Ag\text{Ag}^+ + e^- \rightarrow \text{Ag} with Ecathode∘=+0.80 VE^\circ_{\text{cathode}} = +0.80\text{ V}.

  2. Identify oxidation half-reaction: Ni→Ni2++2e−\text{Ni} \rightarrow \text{Ni}^{2+} + 2e^- with Eanode∘=−0.26 VE^\circ_{\text{anode}} = -0.26\text{ V}.

  3. Calculate standard cell potential directly: Ecell∘=Ecathode∘−Eanode∘=(+0.80 V)−(−0.26 V)=+1.06 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = (+0.80\text{ V}) - (-0.26\text{ V}) = +1.06\text{ V}.

Final answer

(a) Ecell∘=+1.06 VE^\circ_{\text{cell}} = +1.06\text{ V}; (b) Mass of Cd(s)=2.83 g\text{Cd(s)} = 2.83\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review why E∘E^\circ is an intensive property by inspecting the relationship ΔG∘=−nFE∘\Delta G^\circ = -nFE^\circ.

  • Practice calculating cell potentials for balanced reactions with differing stoichiometric coefficients (such as 3Ag+/Al3\text{Ag}^+ / \text{Al}).

  • Keep your excellent structured approach to Faraday's law calculations for electrolysis problems.

OverviewACEpath Teacher's Diagnosis

03 The student overlooks the 2:1 stoichiometry between electrons and cadmium ions in the reduction half-reaction, assuming 1 mole of electrons deposits 1 mole of cadmium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ecell∘=Ecathode∘−Eanode∘  ⟹  Ecell∘=0.80 V−(−0.26 V)=+1.06 VE^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} \implies E^\circ_{\text{cell}} = 0.80\text{ V} - (-0.26\text{ V}) = +1.06\text{ V}

  2. Step 2

    t=45.0×60 s=2700 s  ⟹  Q=1.80 A×2700 s=4860 C  ⟹  n(e−)=4860 C96485 C/mol=0.05037 molt = 45.0 \times 60\text{ s} = 2700\text{ s} \implies Q = 1.80\text{ A} \times 2700\text{ s} = 4860\text{ C} \implies n(e^-) = \frac{4860\text{ C}}{96485\text{ C/mol}} = 0.05037\text{ mol}

  3. Step 3

    n(Cd)=n(e−)=0.05037 moln(\text{Cd}) = n(e^-) = 0.05037\text{ mol}

    Correct

    nCd=ne−2=0.05037 mol2≈0.02519 moln_{\ce{Cd}} = \frac{n_{e^-}}{2} = \frac{0.05037\text{ mol}}{2} \approx 0.02519\text{ mol}

    You equated the moles of cadmium directly to the moles of electrons. Because reducing one CdX2+\ce{Cd^2+} ion to Cd(s)\ce{Cd(s)} requires 22 electrons (CdX2++2e−→Cd(s)\ce{Cd^2+} + 2e^- \rightarrow \ce{Cd(s)}), the stoichiometric factor is 1 mol Cd2 mol e−\frac{1\text{ mol Cd}}{2\text{ mol }e^-}.

  4. Step 4

    mass of Cd=0.05037 mol×112.41 g/mol=5.66 g\text{mass of Cd} = 0.05037\text{ mol} \times 112.41\text{ g/mol} = 5.66\text{ g}

    Correct

    mass of Cd=0.025185 mol×112.41 g/mol≈2.83 g\text{mass of Cd} = 0.025185\text{ mol} \times 112.41\text{ g/mol} \approx 2.83\text{ g}

    You correctly multiplied by the molar mass of cadmium, but your numerical answer is twice the expected value due to the stoichiometric error in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You applied the standard cell potential equation Ecell∘=Ecathode∘−Eanode∘E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} correctly.

You properly converted time from minutes to seconds.

You accurately calculated total electrical charge and moles of electrons using Q=I⋅tQ = I \cdot t and Faraday's constant.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Faraday's Law Stoichiometry Omission

You set n(Cd)=n(e−)n(\text{Cd}) = n(e^-), forgetting that CdX2+\ce{Cd^2+} requires 22 moles of electrons per mole of metal deposited.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the electron stoichiometry (zz) in Faraday's law calculations by treating electron-to-metal conversion as an assumed 1:11:1 ratio rather than inspecting the balanced reduction half-reaction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Write the Balanced Half-Reaction
  • Every electrodeposition calculation must begin with Mz++ze−→M(s)\ce{M}^{z+} + z e^- \rightarrow \ce{M(s)}.

  • Identify the valence of the metal cation to determine zz, the number of electrons transferred per metal atom.

Apply the Mole Ratio
  • Moles of product equal ne−z\frac{n_{e^-}}{z}, where zz is the coefficient of electrons in the reduction half-reaction.

  • Always multiply ne−n_{e^-} by 1 mol metalz mol e−\frac{1\text{ mol metal}}{z\text{ mol }e^-} before converting to mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the reduction half-reaction: CdX2+(aq)+2e−→Cd(s)\ce{Cd^2+(aq)} + 2e^- \rightarrow \ce{Cd(s)}, which shows z=2z = 2.

  2. Calculate moles of deposited cadmium: nCd=ne−2=0.05037 mol2=0.025185 moln_{\ce{Cd}} = \frac{n_{e^-}}{2} = \frac{0.05037\text{ mol}}{2} = 0.025185\text{ mol}.

  3. Calculate theoretical mass: m=0.025185 mol×112.41 g/mol≈2.83 gm = 0.025185\text{ mol} \times 112.41\text{ g/mol} \approx 2.83\text{ g}.

Final answer

(a) Ecell∘=+1.06 VE^\circ_{\text{cell}} = +1.06\text{ V}; (b) Mass of Cd(s)=2.83 g\ce{Cd(s)} = 2.83\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the balanced cathode half-reaction explicitly before converting moles of electrons into moles of substance.

  • Practice using the unified dimensional analysis setup: mass=I⋅tF×1 mol Mz mol e−×Mmolar\text{mass} = \frac{I \cdot t}{F} \times \frac{1\text{ mol M}}{z\text{ mol }e^-} \times M_{\text{molar}} to keep all conversion factors visible.

Lock it in

Similar question

01

A solution of CuSOX4(aq)\ce{CuSO4(aq)} is electrolyzed with a constant current of 2.50 A2.50\text{ A} for 30.0 minutes30.0\text{ minutes}. Calculate the theoretical mass of Cu(s)\ce{Cu(s)} deposited at the cathode (molar mass of Cu=63.55 g/mol\ce{Cu} = 63.55\text{ g/mol}, F=96485 C/mol e−F = 96485\text{ C/mol }e^-).

Answer

1.48 g1.48\text{ g}. Key steps: t=30.0 min×60 s/min=1800 st = 30.0\text{ min} \times 60\text{ s/min} = 1800\text{ s}; Q=2.50 A×1800 s=4500 CQ = 2.50\text{ A} \times 1800\text{ s} = 4500\text{ C}; ne−=4500 C/96485 C/mol≈0.04664 moln_{e^-} = 4500\text{ C} / 96485\text{ C/mol} \approx 0.04664\text{ mol}; reduction is CuX2++2 eX−→Cu\ce{Cu^2+ + 2e^- -> Cu}, so nCu=0.04664/2≈0.02332 moln_{\ce{Cu}} = 0.04664 / 2 \approx 0.02332\text{ mol}; mass=0.02332 mol×63.55 g/mol≈1.48 g\text{mass} = 0.02332\text{ mol} \times 63.55\text{ g/mol} \approx 1.48\text{ g}.

02

An electrochemical cell supplies 0.750 A0.750\text{ A} to plate gold from a solution containing AuX3+(aq)\ce{Au^3+(aq)} onto an electrode for 1.50 hours1.50\text{ hours}. Determine the mass of gold deposited (molar mass of Au=196.97 g/mol\ce{Au} = 196.97\text{ g/mol}, F=96485 C/mol e−F = 96485\text{ C/mol }e^-).

Answer

2.76 g2.76\text{ g}. Key steps: t=1.50 h×3600 s/h=5400 st = 1.50\text{ h} \times 3600\text{ s/h} = 5400\text{ s}; Q=0.750 A×5400 s=4050 CQ = 0.750\text{ A} \times 5400\text{ s} = 4050\text{ C}; ne−=4050/96485≈0.04198 moln_{e^-} = 4050 / 96485 \approx 0.04198\text{ mol}; reduction is AuX3++3 eX−→Au\ce{Au^3+ + 3e^- -> Au}, so nAu=0.04198/3≈0.01400 moln_{\ce{Au}} = 0.04198 / 3 \approx 0.01400\text{ mol}; mass=0.01400 mol×196.97 g/mol≈2.76 g\text{mass} = 0.01400\text{ mol} \times 196.97\text{ g/mol} \approx 2.76\text{ g}.

03

A student deposits 1.08 g1.08\text{ g} of silver from an AgX+(aq)\ce{Ag+(aq)} bath using a constant current of 1.20 A1.20\text{ A}. How many minutes did the electrolysis run? (Molar mass of Ag=107.87 g/mol\ce{Ag} = 107.87\text{ g/mol}, F=96485 C/mol e−F = 96485\text{ C/mol }e^-).

Answer

13.4 min13.4\text{ min}. Key steps: nAg=1.08 g/107.87 g/mol≈0.01001 moln_{\ce{Ag}} = 1.08\text{ g} / 107.87\text{ g/mol} \approx 0.01001\text{ mol}; since AgX++eX−→Ag\ce{Ag+ + e^- -> Ag}, ne−=0.01001 moln_{e^-} = 0.01001\text{ mol}; Q=0.01001 mol×96485 C/mol≈966.0 CQ = 0.01001\text{ mol} \times 96485\text{ C/mol} \approx 966.0\text{ C}; t=Q/I=966.0 C/1.20 A≈805 st = Q / I = 966.0\text{ C} / 1.20\text{ A} \approx 805\text{ s}; t=805 s/60 s/min≈13.4 mint = 805\text{ s} / 60\text{ s/min} \approx 13.4\text{ min}.

Loading workspace…