Resources

A linear polyester synthesized from stoichiometric quantities of ethylene glycol and terephthalic acid has an experimental number-average molar mass (Mˉn\bar{M}_n) of 19,220 g/mol19{,}220\text{ g/mol}. The molar mass of the repeating unit (−O−CH2CH2−O−CO−C6H4−CO−-\text{O}-\text{CH}_2\text{CH}_2-\text{O}-\text{CO}-\text{C}_6\text{H}_4-\text{CO}-) is M0=192.17 g/molM_0 = 192.17\text{ g/mol}. Assuming Carothers' relation applies to an equimolar bifunctional condensation reaction (Xˉn=11−p\bar{X}_n = \frac{1}{1-p}), calculate the fractional conversion (extent of reaction, pp) of the functional groups required to achieve this molar mass.

Answer and steps

Final answer

p=0.9900p = 0.9900

Steps

01

Calculate the Number-Average Degree of Polymerization (Xˉn\bar{X}_n)

The number-average degree of polymerization, Xˉn\bar{X}_n, represents the average number of repeating units per polymer chain. It is determined by the ratio of the number-average molar mass (Mˉn\bar{M}_n) of the polymer to the molar mass of one repeating unit (M0M_0):

Xˉn=MˉnM0\bar{X}_n = \frac{\bar{M}_n}{M_0}

Substitute the given values into the equation:

Xˉn=19,220 g/mol192.17 g/mol≈100.016≈100\bar{X}_n = \frac{19{,}220\text{ g/mol}}{192.17\text{ g/mol}} \approx 100.016 \approx 100


02

Apply the Carothers Equation to Solve for Extent of Reaction (pp)

For a step-growth condensation polymerization with stoichiometric (equimolar) amounts of bifunctional monomers (A-A+B-B\text{A-A} + \text{B-B}), the relationship between the degree of polymerization (Xˉn\bar{X}_n) and the extent of reaction (pp) is given by Carothers' equation:

Xˉn=11−p\bar{X}_n = \frac{1}{1 - p}

Rearranging this formula to solve directly for the fractional conversion pp:

1−p=1Xˉn1 - p = \frac{1}{\bar{X}_n}

p=1−1Xˉnp = 1 - \frac{1}{\bar{X}_n}


03

Compute the Fractional Conversion

Substitute Xˉn=100\bar{X}_n = 100 into the rearranged formula:

p=1−1100=1−0.01=0.9900p = 1 - \frac{1}{100} = 1 - 0.01 = 0.9900

Key Takeaway & Common Pitfall: In step-growth condensation polymerizations, high molecular weight polymers are only formed at exceptionally high extents of reaction. A common mistake is assuming that a moderately high conversion (such as 90%90\% or p=0.90p = 0.90) yields large polymer chains; at p=0.90p = 0.90, the degree of polymerization is only Xˉn=10\bar{X}_n = 10, which corresponds to very short oligomers rather than high-performance plastics.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student rearranges Carothers' equation incorrectly as p = 1 - X̄n instead of p = 1 - 1/X̄n.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Xˉn=MˉnM0=19220192.17=100\bar{X}_n = \frac{\bar{M}_n}{M_0} = \frac{19220}{192.17} = 100

  2. Step 2

    Xˉn=11−p  ⟹  1−p=Xˉn\bar{X}_n = \frac{1}{1-p} \implies 1-p = \bar{X}_n

    Correct

    Xˉn=11−p  ⟹  1−p=1Xˉn  ⟹  p=1−1Xˉn\bar{X}_n = \frac{1}{1-p} \implies 1-p = \frac{1}{\bar{X}_n} \implies p = 1 - \frac{1}{\bar{X}_n}

    When taking the reciprocal of both sides of Xˉn=11−p\bar{X}_n = \frac{1}{1-p}, the left side becomes 1Xˉn\frac{1}{\bar{X}_n}, not Xˉn\bar{X}_n.

  3. Step 3

    p=1−100=−99p = 1 - 100 = -99

    Correct

    p=1−1100=0.9900p = 1 - \frac{1}{100} = 0.9900

    This step correctly isolates pp from your equation 1−p=Xˉn1-p = \bar{X}_n, but the result is invalid because it propagates the algebraic rearrangement error from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the degree of polymerization as Xˉn=100\bar{X}_n = 100.

You selected the correct form of Carothers' equation for stoichiometric bifunctional monomers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic inversion error in formula rearrangement

You equated the denominator 1−p1-p directly to Xˉn\bar{X}_n instead of its reciprocal 1Xˉn\frac{1}{\bar{X}_n}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Forgetting that isolating a variable in the denominator requires taking the reciprocal of both sides or cross-multiplying, combined with overlooking the physical reality that fractional conversion pp must satisfy 0≤p<10 \le p < 1.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating Denominators
  • If y=1xy = \frac{1}{x}, then x=1yx = \frac{1}{y}, not x=yx = y.

  • Take the reciprocal of both sides: from Xˉn=11−p\bar{X}_n = \frac{1}{1-p}, invert to get 1Xˉn=1−p\frac{1}{\bar{X}_n} = 1-p.

Physical Boundary Check for Conversion
  • Fractional conversion represents a probability or fraction of reacted functional groups, strictly bounded between 00 and 11.

  • Whenever you compute pp, immediately check that 0≤p<10 \le p < 1; a negative value or a value greater than 11 signals an algebraic error.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the reciprocal of both sides of Xˉn=11−p\bar{X}_n = \frac{1}{1-p} to get 1−p=1Xˉn1 - p = \frac{1}{\bar{X}_n}.

  2. Subtract 11 and multiply by −1-1 to isolate pp: p=1−1Xˉnp = 1 - \frac{1}{\bar{X}_n}.

  3. Substitute Xˉn=100\bar{X}_n = 100: p=1−1100=1−0.01=0.9900p = 1 - \frac{1}{100} = 1 - 0.01 = 0.9900.

Final answer

p=0.9900p = 0.9900

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice cross-multiplication or reciprocal operations when rearranging equations with variables in the denominator.

  • Always perform a reality check on physical quantities like extent of reaction pp, ensuring 0≤p≤10 \le p \le 1.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the extent of reaction as the unreacted fraction (1 - p = 1/X̄n = 0.01) instead of solving for p = 1 - 0.01.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Xˉn=19220192.17=100\bar{X}_n = \frac{19220}{192.17} = 100

  2. Step 2

    p=1Xˉnp = \frac{1}{\bar{X}_n}

    Correct

    1−p=1Xˉn  ⟹  p=1−1Xˉn1 - p = \frac{1}{\bar{X}_n} \implies p = 1 - \frac{1}{\bar{X}_n}

    Carothers' equation is Xˉn=11−p\bar{X}_n = \frac{1}{1 - p}. Taking the reciprocal yields 1−p=1Xˉn1 - p = \frac{1}{\bar{X}_n}, which means p=1−1Xˉnp = 1 - \frac{1}{\bar{X}_n}, not 1Xˉn\frac{1}{\bar{X}_n}.

  3. Step 3

    p=1100=0.01p = \frac{1}{100} = 0.01

    Correct

    p=1−1100=0.9900p = 1 - \frac{1}{100} = 0.9900

    Substituting Xˉn=100\bar{X}_n = 100 into the correct expression gives p=1−0.01=0.9900p = 1 - 0.01 = 0.9900 (or 99.00%99.00\% conversion).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the relationship Xˉn=MˉnM0\bar{X}_n = \frac{\bar{M}_n}{M_0}.

You computed the degree of polymerization accurately as 100100.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic Inversion Error / Unreacted Fraction Confusion

You equated pp directly to 1Xˉn\frac{1}{\bar{X}_n}, which is actually the fraction of remaining unreacted groups (1−p1 - p).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In Carothers' equation Xˉn=11−p\bar{X}_n = \frac{1}{1 - p}, the denominator (1−p)(1 - p) represents the fraction of unreacted functional groups. Inverting the fraction yields 1−p=1Xˉn1 - p = \frac{1}{\bar{X}_n}, requiring one more step (p=1−1Xˉnp = 1 - \frac{1}{\bar{X}_n}) to isolate the extent of reaction pp.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverting the Carothers Equation
  • For equimolar bifunctional monomers, Xˉn=11−p  ⟹  1−p=1Xˉn  ⟹  p=1−1Xˉn\bar{X}_n = \frac{1}{1-p} \implies 1 - p = \frac{1}{\bar{X}_n} \implies p = 1 - \frac{1}{\bar{X}_n}.

  • Isolate the entire binomial denominator (1−p)(1 - p) first before solving for pp.

Physical Reasonableness Check
  • Step-growth polymerization requires very high conversion (p>0.98p > 0.98) to form high-molecular-weight polymers (large Xˉn\bar{X}_n).

  • Verify that high Xˉn\bar{X}_n values correspond to pp close to 11, not close to 00.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange Carothers' equation: 1−p=1Xˉn1 - p = \frac{1}{\bar{X}_n}

  2. Solve for the extent of reaction: p=1−1Xˉnp = 1 - \frac{1}{\bar{X}_n}

  3. Substitute Xˉn=100\bar{X}_n = 100: p=1−1100=1−0.01=0.9900p = 1 - \frac{1}{100} = 1 - 0.01 = 0.9900

Final answer

p=0.9900p = 0.9900

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables that appear in binomial denominators like (1−p)(1 - p).

  • Always perform a physical sanity check: high degree of polymerization in condensation polymerizations always requires a fractional conversion pp very close to 11.

OverviewACEpath Teacher's Diagnosis

03 The student defines the degree of polymerization as the ratio M0 / M̄n instead of M̄n / M0.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Xˉn=M0Mˉn=192.1719220=0.01\bar{X}_n = \frac{M_0}{\bar{M}_n} = \frac{192.17}{19220} = 0.01

    Correct

    Xˉn=MˉnM0=19,220 g/mol192.17 g/mol≈100\bar{X}_n = \frac{\bar{M}_n}{M_0} = \frac{19{,}220\text{ g/mol}}{192.17\text{ g/mol}} \approx 100

    The degree of polymerization Xˉn\bar{X}_n represents the total number of repeat units in an average polymer chain, which is the total chain molar mass divided by the molar mass of one repeat unit: Xˉn=MˉnM0\bar{X}_n = \frac{\bar{M}_n}{M_0}. Inverting this ratio gave Xˉn=0.01\bar{X}_n = 0.01, which is physically impossible because a polymer chain must contain at least one monomer unit (Xˉn≥1\bar{X}_n \ge 1).

  2. Step 2

    11−p\frac{1}{1-p} = 0.01   ⟹  \implies 1-p = 100   ⟹  \implies p = 1-100 = -99

    Correct

    11−p\frac{1}{1-p} = 100   ⟹  \implies 1-p = 0.01   ⟹  \implies p = 0.9900

    You rearranged Carothers' relation correctly for your value of Xˉn\bar{X}_n, but because Xˉn\bar{X}_n was inverted, the calculation produced a negative conversion (p=−99p = -99). Fractional conversion must always lie between 00 and 11.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified Carothers' equation Xˉn=11−p\bar{X}_n = \frac{1}{1-p} for an equimolar condensation polymerization.

You algebraically rearranged and solved the equation correctly based on your intermediate value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted ratio in degree of polymerization

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the fraction defining the number-average degree of polymerization, computing M0Mˉn\frac{M_0}{\bar{M}_n} instead of MˉnM0\frac{\bar{M}_n}{M_0}, and did not perform a physical reality check on the resulting values of Xˉn<1\bar{X}_n < 1 and p<0p < 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Degree of Polymerization
  • Xˉn=Total molar mass of chainMolar mass of one repeat unit=MˉnM0\bar{X}_n = \frac{\text{Total molar mass of chain}}{\text{Molar mass of one repeat unit}} = \frac{\bar{M}_n}{M_0}

  • Ensure the larger quantity (total chain molar mass) is in the numerator so that Xˉn≥1\bar{X}_n \ge 1.

Physical Reality Check for Extent of Reaction
  • Fractional conversion pp must satisfy 0≤p<10 \le p < 1.

  • If your calculated conversion is negative or exceeds 11, check whether you inverted Xˉn\bar{X}_n or made an algebraic sign error.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Xˉn=MˉnM0=19,220192.17≈100\bar{X}_n = \frac{\bar{M}_n}{M_0} = \frac{19{,}220}{192.17} \approx 100

  2. Xˉn=11−p  ⟹  1−p=1100=0.01\bar{X}_n = \frac{1}{1-p} \implies 1 - p = \frac{1}{100} = 0.01

  3. p=1−0.01=0.9900p = 1 - 0.01 = 0.9900

Final answer

p=0.9900p = 0.9900

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that degree of polymerization Xˉn\bar{X}_n counts repeat units per chain, so Xˉn\bar{X}_n is always ≥1\ge 1 and requires Mˉn\bar{M}_n in the numerator.

  • Always verify that fractional conversion falls within the physical boundary 0≤p<10 \le p < 1.

Lock it in

Similar question

01

A stoichiometric condensation reaction between hexamethylenediamine and adipic acid produces Nylon-6,6 with a number-average degree of polymerization Xˉn=200\bar{X}_n = 200. Assuming Carothers' equation applies, calculate the extent of reaction pp.

Answer

p=0.9950p = 0.9950. Key steps: Use Carothers' relation Xˉn=11−p  ⟹  p=1−1Xˉn\bar{X}_n = \frac{1}{1-p} \implies p = 1 - \frac{1}{\bar{X}_n}. Substitute Xˉn=200\bar{X}_n = 200 to get p=1−1200=1−0.005=0.9950p = 1 - \frac{1}{200} = 1 - 0.005 = 0.9950.

02

Poly(lactic acid) is synthesized by self-condensation of lactic acid. If the reaction reaches an extent of conversion p=0.960p = 0.960, determine the resulting number-average degree of polymerization (Xˉn\bar{X}_n) and explain why high-strength materials require even higher conversions.

Answer

Xˉn=25\bar{X}_n = 25. Key steps: Xˉn=11−0.960=10.040=25\bar{X}_n = \frac{1}{1 - 0.960} = \frac{1}{0.040} = 25. At p=0.960p = 0.960, the chains are still short oligomers; mechanical strength requires significant chain entanglement, which typically only develops when Xˉn>100\bar{X}_n > 100 (p>0.990p > 0.990).

03

A sample of poly(ethylene terephthalate) (PET, repeat unit M0=192.17 g/molM_0 = 192.17\text{ g/mol}) is synthesized by reacting equal moles of diacid and diol. If the target number-average molar mass is Mˉn=38,434 g/mol\bar{M}_n = 38{,}434\text{ g/mol}, what fractional conversion of ester-forming functional groups must be achieved?

Answer

p=0.9950p = 0.9950. Key steps: Calculate Xˉn=MˉnM0=38,434192.17≈200\bar{X}_n = \frac{\bar{M}_n}{M_0} = \frac{38{,}434}{192.17} \approx 200. Apply rearranged Carothers' equation: p=1−1Xˉn=1−1200=0.9950p = 1 - \frac{1}{\bar{X}_n} = 1 - \frac{1}{200} = 0.9950.

Loading workspace…