Resources

Polylactic acid (PLA) is produced by the condensation polymerization of lactic acid (CH3CH(OH)COOH\text{CH}_3\text{CH(OH)COOH}, molar mass 90.08 g/mol90.08\text{ g/mol}). During an industrial batch run, 900.8 g900.8\text{ g} of pure lactic acid is polymerized to a final extent of reaction p=0.9850p = 0.9850. Condensation of each ester linkage releases one water molecule (molar mass 18.02 g/mol18.02\text{ g/mol}). Calculate: (a) the number-average degree of polymerization (Xˉn\bar{X}_n) using Carothers' equation, and (b) the total mass of liquid water collected in the condenser traps upon reaching this conversion.

Answer and steps

Final answer

(a) Xˉn=66.7\bar{X}_n = 66.7; (b) mwater=177.5 gm_{\text{water}} = 177.5\text{ g}

Steps

Part (a): Degree of Polymerization (Xˉn\bar{X}_n)

Lactic acid, CHX3CH(OH)COOH\ce{CH3CH(OH)COOH}, is an AB\text{AB}-type monomer containing one hydroxyl group (−OH-\ce{OH}) and one carboxyl group (−COOH-\ce{COOH}).

For a linear condensation polymerization of an AB\text{AB} monomer with an extent of reaction pp, the relationship between the initial number of monomer molecules N0N_0 and the number of molecules remaining NN is defined by Carothers' equation:

Xˉn=N0N=11−p\bar{X}_n = \frac{N_0}{N} = \frac{1}{1 - p}

Substitute the given conversion, p=0.9850p = 0.9850:

Xˉn=11−0.9850=10.0150≈66.7\bar{X}_n = \frac{1}{1 - 0.9850} = \frac{1}{0.0150} \approx 66.7


Part (b): Mass of Water Released

  1. Calculate initial moles of monomer (n0n_0):

    n0=mlactic acidMlactic acid=900.8 g90.08 g/mol=10.00 moln_0 = \frac{m_{\text{lactic acid}}}{M_{\text{lactic acid}}} = \frac{900.8\text{ g}}{90.08\text{ g/mol}} = 10.00\text{ mol}

  2. Calculate moles of water formed (nwatern_{\text{water}}):

    Every reaction between a carboxyl group and a hydroxyl group produces one ester linkage and releases one molecule of HX2O\ce{H2O}. The extent of reaction pp denotes the fraction of the initial functional groups that have formed linkages:

    nwater=p⋅n0=0.9850×10.00 mol=9.850 moln_{\text{water}} = p \cdot n_0 = 0.9850 \times 10.00\text{ mol} = 9.850\text{ mol}

  3. Calculate the mass of liquid water collected:

    mwater=nwater×Mwater=9.850 mol×18.02 g/mol=177.497 g≈177.5 gm_{\text{water}} = n_{\text{water}} \times M_{\text{water}} = 9.850\text{ mol} \times 18.02\text{ g/mol} = 177.497\text{ g} \approx 177.5\text{ g}

Common Pitfall: Remember that extent of reaction pp describes the fraction of functional groups converted, not the mass percentage of the reaction mixture. Always work in molar amounts to calculate the reaction by-product.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the fraction of functional groups converted with the fraction of unreacted groups, using 1 / p instead of 1 / (1 - p) in Carothers' equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Xˉn=1p  ⟹  Xˉn=10.9850≈1.015\bar{X}_n = \frac{1}{p} \implies \bar{X}_n = \frac{1}{0.9850} \approx 1.015

    Correct

    Xˉn=11−p=11−0.9850=10.0150≈66.7\bar{X}_n = \frac{1}{1 - p} = \frac{1}{1 - 0.9850} = \frac{1}{0.0150} \approx 66.7

    You used 1p\frac{1}{p} instead of the standard Carothers equation Xˉn=11−p\bar{X}_n = \frac{1}{1 - p}. Because pp represents the fraction of functional groups that have reacted, 1−p1 - p represents the fraction of unreacted groups (and thus the fraction of molecules remaining). At high conversion (p=0.9850p = 0.9850), polymer chains should be long (Xˉn≈66.7\bar{X}_n \approx 66.7), not near-monomer length (1.0151.015).

  2. Step 2

    n0=900.8 g90.08 g/mol=10.00 moln_0 = \frac{900.8\text{ g}}{90.08\text{ g/mol}} = 10.00\text{ mol}

  3. Step 3

    nH2O=p⋅n0=0.9850⋅10.00 mol=9.850 mol  ⟹  mH2O=9.850 mol⋅18.02 g/mol=177.5 gn_{\text{H}_2\text{O}} = p \cdot n_0 = 0.9850 \cdot 10.00\text{ mol} = 9.850\text{ mol} \implies m_{\text{H}_2\text{O}} = 9.850\text{ mol} \cdot 18.02\text{ g/mol} = 177.5\text{ g}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial moles of lactic acid from its mass and molar mass.

You correctly recognized that the moles of water released equal p⋅n0p \cdot n_0.

You correctly multiplied by the molar mass of water to find the final mass of collected water.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misapplied Carothers' Equation

In part (a), you wrote the formula as Xˉn=1p\bar{X}_n = \frac{1}{p} instead of Xˉn=11−p\bar{X}_n = \frac{1}{1 - p}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the fraction of functional groups converted (pp) with the fraction of molecules remaining (1−p1 - p), which led to a degree of polymerization that decreased with reaction progress rather than growing toward infinity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Boundary condition check
  • At p=0p = 0, Xˉn=1\bar{X}_n = 1 (only monomers). As p→1p \to 1, Xˉn→∞\bar{X}_n \to \infty (long polymer chains).

  • Check whether your formula yields Xˉn≫1\bar{X}_n \gg 1 at 98.5%98.5\% conversion. If your formula yields Xˉn≈1\bar{X}_n \approx 1, the denominator must be 1−p1 - p rather than pp.

Carothers' equation definition
  • Xˉn=N0N=N0N0(1−p)=11−p\bar{X}_n = \frac{N_0}{N} = \frac{N_0}{N_0(1 - p)} = \frac{1}{1 - p} for stoichiometric linear step-growth polymerization.

  • Always write the denominator as 1−p1 - p because each new linkage reduces the total number of discrete molecules NN.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the standard Carothers equation for an AB\text{AB} monomer: Xˉn=11−p\bar{X}_n = \frac{1}{1 - p}.

  2. Substitute p=0.9850p = 0.9850: Xˉn=11−0.9850=10.0150≈66.7\bar{X}_n = \frac{1}{1 - 0.9850} = \frac{1}{0.0150} \approx 66.7.

Final answer

(a) Xˉn=66.7\bar{X}_n = 66.7; (b) mwater=177.5 gm_{\text{water}} = 177.5\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving Carothers' equation from the definition Xˉn=N0N\bar{X}_n = \frac{N_0}{N} to reinforce why 1−p1 - p appears in the denominator.

  • Verify limiting behaviors whenever working with polymerization formulas (p→1p \to 1 must give a high degree of polymerization).

OverviewACEpath Teacher's Diagnosis

02 The student assumes that each monomer molecule has two reactive groups that both react independently to release two water molecules per monomer, doubling the calculated moles and mass of water.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Xˉn=11−p  ⟹  Xˉn=11−0.9850=10.0150≈66.67\bar{X}_n = \frac{1}{1-p} \implies \bar{X}_n = \frac{1}{1-0.9850} = \frac{1}{0.0150} \approx 66.67

  2. Step 2

    n0=900.8 g90.08 g/mol=10.00 moln_0 = \frac{900.8\text{ g}}{90.08\text{ g/mol}} = 10.00\text{ mol}

  3. Step 3

    nHX2O=2×p×n0=2×0.9850×10.00 mol=19.70 moln_{\ce{H2O}} = 2 \times p \times n_0 = 2 \times 0.9850 \times 10.00\text{ mol} = 19.70\text{ mol}

    Correct

    nHX2O=p×n0=0.9850×10.00 mol=9.850 moln_{\ce{H2O}} = p \times n_0 = 0.9850 \times 10.00\text{ mol} = 9.850\text{ mol}

    In condensation polymerization, forming one ester linkage requires pairing one carboxyl group (−COOH-\ce{COOH}) with one hydroxyl group (−OH-\ce{OH}), producing exactly one HX2O\ce{H2O} molecule per linkage. Since n0n_0 moles of monomer provide n0n_0 pairs of complementary groups, complete reaction yields at most n0n_0 moles of water, so multiplying by 2 is incorrect.

  4. Step 4

    mHX2O=19.70 mol×18.02 g/mol=355.0 gm_{\ce{H2O}} = 19.70\text{ mol} \times 18.02\text{ g/mol} = 355.0\text{ g}

    Correct

    mHX2O=9.850 mol×18.02 g/mol≈177.5 gm_{\ce{H2O}} = 9.850\text{ mol} \times 18.02\text{ g/mol} \approx 177.5\text{ g}

    You carried out the molar mass multiplication correctly, but your final mass is doubled because of the extra factor of 2 in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and calculated Carothers' equation for degree of polymerization.

You calculated the initial moles of monomer accurately from mass and molar mass.

You correctly applied the molar mass of water to convert from moles to mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometry of condensation by-product

Multiplying the moles of water formed by an extra factor of 2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the two reactive ends of an AB\text{AB} monomer as independent generators of water rather than as complementary partners that react together to form a single linkage and release a single water molecule.

REASONING PATH
Your ACEpath teacher’s suggested approach
Counting linkages per monomer in AB polycondensation
  • In an AB\text{AB}-type monomer (such as hydroxy acids or amino acids), 1 mol1\text{ mol} of monomer contains 1 mol1\text{ mol} of −COOH-\ce{COOH} and 1 mol1\text{ mol} of −OH-\ce{OH}. When they react to form an ester bond, 1 mol1\text{ mol} of bonds produces 1 mol1\text{ mol} of HX2O\ce{H2O}, not 2 mol2\text{ mol}.

  • Identify the stoichiometry of bond formation: count how many water molecules are liberated per linkage formed, and link extent of reaction pp to the fraction of formed linkages.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. nHX2O=p×n0=0.9850×10.00 mol=9.850 moln_{\ce{H2O}} = p \times n_0 = 0.9850 \times 10.00\text{ mol} = 9.850\text{ mol}

  2. mHX2O=9.850 mol×18.02 g/mol=177.497 g≈177.5 gm_{\ce{H2O}} = 9.850\text{ mol} \times 18.02\text{ g/mol} = 177.497\text{ g} \approx 177.5\text{ g}

Final answer

(a) Xˉn=66.7\bar{X}_n = 66.7; (b) mwater=177.5 gm_{\text{water}} = 177.5\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the condensation mechanism for hydroxy acids to see clearly that one −OH-\ce{OH} and one −COOH-\ce{COOH} condense into one ester bond and one water molecule.

  • Practice identifying the theoretical maximum moles of condensation by-product for AB\text{AB} vs. A2+B2\text{A}_2 + \text{B}_2 monomer systems at complete conversion.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the extent of reaction p as the fraction of unreacted monomer remaining that produces water, calculating the water released from (1 - p) instead of p.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Xˉn=11−p=11−0.9850=10.0150≈66.67\bar{X}_n = \frac{1}{1-p} = \frac{1}{1-0.9850} = \frac{1}{0.0150} \approx 66.67

  2. Step 2

    n0=900.8 g90.08 g/mol=10.00 moln_0 = \frac{900.8\text{ g}}{90.08\text{ g/mol}} = 10.00\text{ mol}

  3. Step 3

    nHX2O=(1−p)∗n0=0.0150∗10.00 mol=0.150 moln_{\ce{H2O}} = (1-p) * n_0 = 0.0150 * 10.00\text{ mol} = 0.150\text{ mol}

    Correct

    nHX2O=p⋅n0=0.9850×10.00 mol=9.850 moln_{\ce{H2O}} = p \cdot n_0 = 0.9850 \times 10.00\text{ mol} = 9.850\text{ mol}

    The extent of reaction pp represents the fraction of functional groups that have reacted to form ester bonds. Because each condensation event releases one HX2O\ce{H2O} molecule, the amount of water produced is directly proportional to pp, not (1−p)(1-p).

  4. Step 4

    mHX2O=0.150 mol∗18.02 g/mol=2.703 gm_{\ce{H2O}} = 0.150\text{ mol} * 18.02\text{ g/mol} = 2.703\text{ g}

    Correct

    mHX2O=nHX2O×MHX2O=9.850 mol×18.02 g/mol≈177.5 gm_{\ce{H2O}} = n_{\ce{H2O}} \times M_{\ce{H2O}} = 9.850\text{ mol} \times 18.02\text{ g/mol} \approx 177.5\text{ g}

    Your molar mass multiplication was carried out correctly, but the numerical answer is incorrect due to the molar value carried forward from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied Carothers' equation Xˉn=11−p\bar{X}_n = \frac{1}{1-p} for an AB condensation polymer.

You accurately converted the initial mass of lactic acid into moles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
extent of reaction interpretation error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the reacted fraction (pp) with the unreacted remaining fraction (1−p1-p). Condensation by-products like water are released when functional groups react, so product formation scales with pp, whereas unreacted end-groups scale with 1−p1-p.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define extent of reaction $p$
  • In step-growth polymerization, p=N0−NN0p = \frac{N_0 - N}{N_0} is the fraction of functional groups converted into bonds.

  • Always multiply the initial moles of reacting functional groups by pp to find the moles of linkages formed and condensation by-products released.

Distinguish reacted vs. unreacted fractions
  • The fraction reacted is pp; the fraction remaining unreacted is 1−p1-p.

  • Use 1−p1-p when calculating remaining end-groups or number of molecules (N=N0(1−p)N = N_0(1-p)), but use pp for bonds formed and released by-products.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the initial moles of monomer n0=10.00 moln_0 = 10.00\text{ mol} by the extent of reaction p=0.9850p = 0.9850: nHX2O=p⋅n0=0.9850×10.00 mol=9.850 moln_{\ce{H2O}} = p \cdot n_0 = 0.9850 \times 10.00\text{ mol} = 9.850\text{ mol}.

  2. Multiply the moles of water formed by its molar mass: mHX2O=9.850 mol×18.02 g/mol=177.497 g≈177.5 gm_{\ce{H2O}} = 9.850\text{ mol} \times 18.02\text{ g/mol} = 177.497\text{ g} \approx 177.5\text{ g}.

Final answer

(a) Xˉn=66.7\bar{X}_n = 66.7; (b) mwater=177.5 gm_{\text{water}} = 177.5\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical meaning of pp versus (1−p)(1-p) in condensation mechanisms.

  • Practice identifying whether a question asks for a product formed (proportional to pp) or remaining unreacted species (proportional to 1−p1-p).

Lock it in

Similar question

01

A batch of 6-aminohexanoic acid (extH2extN(CH2ext)5extCOOH ext{H}_2 ext{N(CH}_2 ext{)}_5 ext{COOH}) undergoes linear condensation polymerization to an extent of reaction p=0.9920p = 0.9920. Calculate the number-average degree of polymerization (ar{X}_n).

Answer

Using Carothers' equation: Xˉn=11−p=11−0.9920=10.0080=125\bar{X}_n = \frac{1}{1 - p} = \frac{1}{1 - 0.9920} = \frac{1}{0.0080} = 125.

02

An equimolar mixture of adipic acid and hexamethylenediamine is polymerized to form Nylon 6,6. If the target number-average degree of polymerization is Xˉn=100\bar{X}_n = 100, what fractional extent of reaction pp must be attained?

Answer

Rearrange Carothers' equation: 1−p=1Xˉn  ⟹  p=1−1100=0.99001 - p = \frac{1}{\bar{X}_n} \implies p = 1 - \frac{1}{100} = 0.9900 (or 99.00%99.00\% conversion).

03

Poly(ethylene terephthalate) (PET) is synthesized from 200.0 mol200.0\text{ mol} of an equimolar diacid/diol prepolymer system. If condensation of each linkage eliminates one molecule of ethylene glycol (M=62.07 g/molM = 62.07\text{ g/mol}) and the reaction reaches Xˉn=50.0\bar{X}_n = 50.0, calculate: (a) the extent of reaction pp, and (b) the mass of ethylene glycol byproduct removed.

Answer

(a) 1−p=1Xˉn=150.0=0.020  ⟹  p=0.9801 - p = \frac{1}{\bar{X}_n} = \frac{1}{50.0} = 0.020 \implies p = 0.980. (b) Moles of byproduct released = p⋅n0=0.980×200.0 mol=196.0 molp \cdot n_0 = 0.980 \times 200.0\text{ mol} = 196.0\text{ mol}. Mass removed = 196.0 mol×62.07 g/mol=12,166 g≈1.22×104 g196.0\text{ mol} \times 62.07\text{ g/mol} = 12,166\text{ g} \approx 1.22 \times 10^4\text{ g} (12.2 kg12.2\text{ kg}).

Loading workspace…