Resources

Consider a hypothetical reversible reaction where the potential energy of the reactants is 55.0 kJ/mol55.0\text{ kJ/mol} and the forward activation energy is Ea, forward=78.0 kJ/molE_{\text{a, forward}} = 78.0\text{ kJ/mol}. What is the theoretical physical threshold limit for the potential energy of the products (EproductsE_{\text{products}}) such that the reverse reaction is barrierless (Ea, reverse=0 kJ/molE_{\text{a, reverse}} = 0\text{ kJ/mol})? At this critical boundary, calculate the maximum possible endothermic reaction enthalpy ΔHrxn, max\Delta H_{\text{rxn, max}} and describe the relationship between ΔHrxn\Delta H_{\text{rxn}} and Ea, forwardE_{\text{a, forward}}.

Answer and steps

Final answer

Threshold Eproducts=133.0 kJ/molE_{\text{products}} = 133.0\text{ kJ/mol}; maximum enthalpy ΔHrxn, max=+78.0 kJ/mol\Delta H_{\text{rxn, max}} = +78.0\text{ kJ/mol}; at this barrierless boundary, ΔHrxn=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}}.

Steps

01

Determine the energy of the transition state (ETSE_{\text{TS}})

On a potential energy diagram, the activation energy for the forward reaction (Ea, forwardE_{\text{a, forward}}) represents the energy barrier that reactants must overcome to reach the transition state:

ETS=Ereactants+Ea, forwardE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}}

Substitute the given values:

ETS=55.0 kJ/mol+78.0 kJ/mol=133.0 kJ/molE_{\text{TS}} = 55.0\text{ kJ/mol} + 78.0\text{ kJ/mol} = 133.0\text{ kJ/mol}


02

Determine the threshold product energy (EproductsE_{\text{products}}) for a barrierless reverse reaction

The reverse activation energy is the difference between the transition state energy and the potential energy of the products:

Ea, reverse=ETS−EproductsE_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}}

For the reverse reaction to be barrierless, there is no energy barrier to return to reactants:

Ea, reverse=0 kJ/molE_{\text{a, reverse}} = 0\text{ kJ/mol}

Setting this to zero yields:

Eproducts=ETS=133.0 kJ/molE_{\text{products}} = E_{\text{TS}} = 133.0\text{ kJ/mol}

Key Pitfall: In classical collision and transition-state theory, activation energy cannot be negative (Ea≥0E_{\text{a}} \ge 0). Therefore, the product energy cannot exceed the transition state energy (Eproducts≤ETSE_{\text{products}} \le E_{\text{TS}}), making 133.0 kJ/mol133.0\text{ kJ/mol} the upper physical limit for product energy.


03

Calculate the maximum endothermic reaction enthalpy (ΔHrxn, max\Delta H_{\text{rxn, max}})

The change in enthalpy for a reaction is defined as the difference in energy between products and reactants:

ΔHrxn=Eproducts−Ereactants\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}}

At the threshold limit where Eproducts=133.0 kJ/molE_{\text{products}} = 133.0\text{ kJ/mol}:

ΔHrxn, max=133.0 kJ/mol−55.0 kJ/mol=+78.0 kJ/mol\Delta H_{\text{rxn, max}} = 133.0\text{ kJ/mol} - 55.0\text{ kJ/mol} = +78.0\text{ kJ/mol}

Alternatively, using activation energies:

ΔHrxn=Ea, forward−Ea, reverse=78.0 kJ/mol−0 kJ/mol=+78.0 kJ/mol\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}} = 78.0\text{ kJ/mol} - 0\text{ kJ/mol} = +78.0\text{ kJ/mol}


04

Describe the relationship between ΔHrxn\Delta H_{\text{rxn}} and Ea, forwardE_{\text{a, forward}}

Because Ea, reverse=0 kJ/molE_{\text{a, reverse}} = 0\text{ kJ/mol}, the general relation ΔHrxn=Ea, forward−Ea, reverse\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}} simplifies directly to:

ΔHrxn=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}}

At this boundary, the entire forward activation barrier represents the net absorbed enthalpy of the reaction.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts forward activation energy from reactant energy instead of adding it when determining the transition state energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Etransition_state=Ereactants−Ea, forward  ⟹  Eproducts=55.0−78.0=−23.0 kJ/molE_{\text{transition\_state}} = E_{\text{reactants}} - E_{\text{a, forward}} \implies E_{\text{products}} = 55.0 - 78.0 = -23.0\text{ kJ/mol}

    Correct

    ETS=Ereactants+Ea, forward=55.0+78.0=133.0 kJ/mol  ⟹  Eproducts=133.0 kJ/molE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}} = 55.0 + 78.0 = 133.0\text{ kJ/mol} \implies E_{\text{products}} = 133.0\text{ kJ/mol}

    Activation energy represents an upward energy barrier that reactants must climb to reach the transition state, so you need to add Ea, forwardE_{\text{a, forward}} to EreactantsE_{\text{reactants}}, giving ETS=55.0+78.0=133.0 kJ/molE_{\text{TS}} = 55.0 + 78.0 = 133.0\text{ kJ/mol}.

  2. Step 2

    ΔHrxn, max=Eproducts−Ereactants  ⟹  ΔHrxn, max=−23.0−55.0=−78.0 kJ/mol\Delta H_{\text{rxn, max}} = E_{\text{products}} - E_{\text{reactants}} \implies \Delta H_{\text{rxn, max}} = -23.0 - 55.0 = -78.0\text{ kJ/mol}

    Correct

    ΔHrxn, max=Eproducts−Ereactants=133.0−55.0=+78.0 kJ/mol\Delta H_{\text{rxn, max}} = E_{\text{products}} - E_{\text{reactants}} = 133.0 - 55.0 = +78.0\text{ kJ/mol}

    You correctly set up ΔH=Eproducts−Ereactants\Delta H = E_{\text{products}} - E_{\text{reactants}}, but substituting your negative product energy from Step 1 caused the resulting enthalpy to be −78.0 kJ/mol-78.0\text{ kJ/mol} instead of +78.0 kJ/mol+78.0\text{ kJ/mol}.

  3. Step 3

    ΔHrxn is equal to −Ea, forward at this boundary.\Delta H_{\text{rxn}}\text{ is equal to }-E_{\text{a, forward}}\text{ at this boundary.}

    Correct

    ΔHrxn=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}}

    Because Ea, reverse=0 kJ/molE_{\text{a, reverse}} = 0\text{ kJ/mol} and the forward reaction absorbs energy to climb to the product level, the reaction is endothermic with ΔHrxn=+Ea, forward\Delta H_{\text{rxn}} = +E_{\text{a, forward}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that a barrierless reverse reaction (Ea, reverse=0E_{\text{a, reverse}} = 0) means Eproducts=ETSE_{\text{products}} = E_{\text{TS}}.

You correctly applied the thermodynamic definition ΔHrxn=Eproducts−Ereactants\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Activation Energy Sign Inversion

You wrote a minus sign instead of a plus sign when calculating the transition state energy from reactant energy and activation energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of activation energy on a potential energy diagram. The transition state is always the highest-energy peak on the reaction coordinate, meaning ETS≥EreactantsE_{\text{TS}} \ge E_{\text{reactants}} and ETS=Ereactants+Ea, forwardE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}}, never a subtraction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Transition State Elevation
  • The transition state is always at the top of the energy barrier: ETS=Ereactants+Ea, forwardE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}}.

  • Always add positive activation energy to the baseline energy of the starting species; never subtract it.

Enthalpy and Activation Energy Relation
  • For any single-step reaction, ΔHrxn=Ea, forward−Ea, reverse\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}}.

  • When Ea, reverse=0 kJ/molE_{\text{a, reverse}} = 0\text{ kJ/mol}, check that ΔHrxn=Ea, forward>0\Delta H_{\text{rxn}} = E_{\text{a, forward}} > 0 (endothermic limit).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate transition state energy: ETS=Ereactants+Ea, forward=55.0 kJ/mol+78.0 kJ/mol=133.0 kJ/molE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}} = 55.0\text{ kJ/mol} + 78.0\text{ kJ/mol} = 133.0\text{ kJ/mol}.

  2. Set Eproducts=ETS=133.0 kJ/molE_{\text{products}} = E_{\text{TS}} = 133.0\text{ kJ/mol} because Ea, reverse=ETS−Eproducts=0 kJ/molE_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}} = 0\text{ kJ/mol}.

  3. Compute maximum reaction enthalpy: ΔHrxn, max=Eproducts−Ereactants=133.0 kJ/mol−55.0 kJ/mol=+78.0 kJ/mol\Delta H_{\text{rxn, max}} = E_{\text{products}} - E_{\text{reactants}} = 133.0\text{ kJ/mol} - 55.0\text{ kJ/mol} = +78.0\text{ kJ/mol}.

  4. Relate ΔHrxn\Delta H_{\text{rxn}} to forward activation energy: since ΔHrxn=Ea, forward−Ea, reverse\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}} and Ea, reverse=0E_{\text{a, reverse}} = 0, we have ΔHrxn=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}}.

Final answer

Threshold Eproducts=133.0 kJ/molE_{\text{products}} = 133.0\text{ kJ/mol}; maximum enthalpy ΔHrxn, max=+78.0 kJ/mol\Delta H_{\text{rxn, max}} = +78.0\text{ kJ/mol}; at this barrierless boundary, ΔHrxn=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick potential energy curve to visually confirm that the peak (ETSE_{\text{TS}}) is higher than both reactants and products.

  • Verify your reaction enthalpy using the identity ΔHrxn=Ea, forward−Ea, reverse\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}} to catch sign errors early.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the reaction enthalpy formula by subtracting products from reactants, obtaining the opposite sign for ΔH_rxn.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Etransition_state=55.0+78.0=133.0 kJ/mol  ⟹  Eproducts=Etransition_state=133.0 kJ/molE_{\text{transition\_state}} = 55.0 + 78.0 = 133.0\text{ kJ/mol} \implies E_{\text{products}} = E_{\text{transition\_state}} = 133.0\text{ kJ/mol}

  2. Step 2

    ΔHrxn, max=55.0−133.0=−78.0 kJ/mol\Delta H_{\text{rxn, max}} = 55.0 - 133.0 = -78.0\text{ kJ/mol}

    Correct

    ΔHrxn, max=Eproducts−Ereactants=133.0−55.0=+78.0 kJ/mol\Delta H_{\text{rxn, max}} = E_{\text{products}} - E_{\text{reactants}} = 133.0 - 55.0 = +78.0\text{ kJ/mol}

    You calculated ΔH\Delta H as Ereactants−EproductsE_{\text{reactants}} - E_{\text{products}} instead of Eproducts−EreactantsE_{\text{products}} - E_{\text{reactants}}. Because the products are higher in energy than the reactants, an endothermic reaction must have a positive change in enthalpy.

  3. Step 3

    ΔHrxn\Delta H_{\text{rxn}} is equal in magnitude but opposite in sign to Ea, forwardE_{\text{a, forward}}.

    Correct

    ΔHrxn=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}}

    Because of the sign error in the previous step, you deduced that ΔHrxn\Delta H_{\text{rxn}} has the opposite sign of Ea, forwardE_{\text{a, forward}}. In reality, because Ea, reverse=0 kJ/molE_{\text{a, reverse}} = 0\text{ kJ/mol}, ΔHrxn=Ea, forward−Ea, reverse=Ea, forward=+78.0 kJ/mol\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}} = E_{\text{a, forward}} = +78.0\text{ kJ/mol}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the energy of the transition state by adding the forward activation barrier to the reactant energy.

You recognized that a barrierless reverse reaction implies Eproducts=ETSE_{\text{products}} = E_{\text{TS}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Subtracted in reverse order / Sign inversion

Inverting the order of subtraction in ΔH=Eproducts−Ereactants\Delta H = E_{\text{products}} - E_{\text{reactants}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the thermodynamic convention for state function changes ($ Δ\Delta X = X_{final\text{final}} - X_{initial\text{initial}}$) with bond enthalpy calculations (which use reactants minus products), causing an unintended sign reversal in potential energy diagram analysis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Change Convention
  • Any change Δ\Delta is always final−initial\text{final} - \text{initial}, meaning ΔHrxn=Eproducts−Ereactants\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}}.

  • Always verify whether your reaction is endothermic (products higher than reactants, ΔH>0\Delta H > 0) or exothermic (products lower than reactants, ΔH<0\Delta H < 0) before finalizing the sign.

Activation Energy Relation
  • ΔHrxn=Ea, forward−Ea, reverse\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}}.

  • Use the difference between the forward and reverse activation barriers as a quick sanity check for both the magnitude and sign of ΔH\Delta H.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ΔHrxn, max=Eproducts−Ereactants=133.0 kJ/mol−55.0 kJ/mol=+78.0 kJ/mol\Delta H_{\text{rxn, max}} = E_{\text{products}} - E_{\text{reactants}} = 133.0\text{ kJ/mol} - 55.0\text{ kJ/mol} = +78.0\text{ kJ/mol}

  2. Since Ea, reverse=0 kJ/molE_{\text{a, reverse}} = 0\text{ kJ/mol}, ΔHrxn=Ea, forward−Ea, reverse=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}} = E_{\text{a, forward}}.

Final answer

Threshold Eproducts=133.0 kJ/molE_{\text{products}} = 133.0\text{ kJ/mol}; ΔHrxn, max=+78.0 kJ/mol\Delta H_{\text{rxn, max}} = +78.0\text{ kJ/mol}; ΔHrxn=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the sign convention for ΔHrxn\Delta H_{\text{rxn}} on potential energy diagrams as final minus initial (Eproducts−EreactantsE_{\text{products}} - E_{\text{reactants}}).

  • Practice writing ΔHrxn=Ea, forward−Ea, reverse\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}} to connect kinetic energy barriers directly to thermodynamic enthalpy change.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the energy of products with the activation energy itself, setting the product energy directly to E_a,forward.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Eproducts=Ea, forward=78.0 kJ/molE_{\text{products}} = E_{\text{a, forward}} = 78.0\text{ kJ/mol}

    Correct

    ETS=Ereactants+Ea, forward=55.0+78.0=133.0 kJ/mol  ⟹  Eproducts=ETS=133.0 kJ/molE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}} = 55.0 + 78.0 = 133.0\text{ kJ/mol} \implies E_{\text{products}} = E_{\text{TS}} = 133.0\text{ kJ/mol}

    You equated product potential energy directly to Ea, forwardE_{\text{a, forward}}. Activation energy is the height of the energy barrier measured from the reactants to the transition state (ETS=Ereactants+Ea, forwardE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}}). For a barrierless reverse reaction (Ea, reverse=0 kJ/molE_{\text{a, reverse}} = 0\text{ kJ/mol}), the product energy reaches the transition state level: Eproducts=ETS=133.0 kJ/molE_{\text{products}} = E_{\text{TS}} = 133.0\text{ kJ/mol}.

  2. Step 2

    ΔHrxn, max=Eproducts−Ereactants  ⟹  ΔHrxn, max=78.0−55.0=+23.0 kJ/mol\Delta H_{\text{rxn, max}} = E_{\text{products}} - E_{\text{reactants}} \implies \Delta H_{\text{rxn, max}} = 78.0 - 55.0 = +23.0\text{ kJ/mol}

    Correct

    ΔHrxn, max=133.0−55.0=+78.0 kJ/mol\Delta H_{\text{rxn, max}} = 133.0 - 55.0 = +78.0\text{ kJ/mol}

    You correctly applied the enthalpy definition ΔH=Eproducts−Ereactants\Delta H = E_{\text{products}} - E_{\text{reactants}}, but substituting the incorrect product energy (78.0 kJ/mol78.0\text{ kJ/mol}) produced an incorrect numerical result.

  3. Step 3

    ΔHrxn\Delta H_{\text{rxn}} is always smaller than Ea, forwardE_{\text{a, forward}} by the amount of EreactantsE_{\text{reactants}}.

    Correct

    ΔHrxn=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}}

    Because the reverse reaction is barrierless (Ea, reverse=0 kJ/molE_{\text{a, reverse}} = 0\text{ kJ/mol}), the general relationship ΔHrxn=Ea, forward−Ea, reverse\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}} simplifies directly to ΔHrxn=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled that reaction enthalpy is defined as the potential energy difference between products and reactants (ΔHrxn=Eproducts−Ereactants\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}}).

You carried out the arithmetic consistently based on your assumed product energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Absolute vs. Relative Energy Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated activation energy (EaE_{\text{a}}) as an absolute potential energy level on the y-axis rather than an energy difference relative to a reference state (ETS−EreactantsE_{\text{TS}} - E_{\text{reactants}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Find Transition State Energy First
  • Activation energy is a relative barrier: ETS=Ereactants+Ea, forwardE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}}.

  • Always add forward activation energy to the reactant energy level before solving for other state energies.

Link Reverse Activation Energy to Product Level
  • The reverse barrier is Ea, reverse=ETS−EproductsE_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}}.

  • When a reverse reaction is barrierless (Ea, reverse=0E_{\text{a, reverse}} = 0), set Eproducts=ETSE_{\text{products}} = E_{\text{TS}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate transition state energy: ETS=Ereactants+Ea, forward=55.0 kJ/mol+78.0 kJ/mol=133.0 kJ/molE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}} = 55.0\text{ kJ/mol} + 78.0\text{ kJ/mol} = 133.0\text{ kJ/mol}.

  2. Apply the barrierless condition (Ea, reverse=0 kJ/molE_{\text{a, reverse}} = 0\text{ kJ/mol}): Eproducts=ETS=133.0 kJ/molE_{\text{products}} = E_{\text{TS}} = 133.0\text{ kJ/mol}.

  3. Calculate maximum reaction enthalpy: ΔHrxn, max=Eproducts−Ereactants=133.0 kJ/mol−55.0 kJ/mol=+78.0 kJ/mol\Delta H_{\text{rxn, max}} = E_{\text{products}} - E_{\text{reactants}} = 133.0\text{ kJ/mol} - 55.0\text{ kJ/mol} = +78.0\text{ kJ/mol}.

  4. Compare with forward activation energy: ΔHrxn=Ea, forward−Ea, reverse=Ea, forward−0=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}} = E_{\text{a, forward}} - 0 = E_{\text{a, forward}}.

Final answer

Threshold Eproducts=133.0 kJ/molE_{\text{products}} = 133.0\text{ kJ/mol}; maximum enthalpy ΔHrxn, max=+78.0 kJ/mol\Delta H_{\text{rxn, max}} = +78.0\text{ kJ/mol}; at this barrierless boundary, ΔHrxn=Ea, forward\Delta H_{\text{rxn}} = E_{\text{a, forward}}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice sketching reaction coordinate diagrams and labeling energy levels (EreactantsE_{\text{reactants}}, EproductsE_{\text{products}}, ETSE_{\text{TS}}) as horizontal lines and differences (EaE_{\text{a}}, ΔH\Delta H) as vertical arrows.

  • Use the formula ΔHrxn=Ea, forward−Ea, reverse\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}} to verify your enthalpy changes independently.

Lock it in

Similar question

01

A reversible reaction has Ereactants=30.0 kJ/molE_{\text{reactants}} = 30.0\text{ kJ/mol} and Ea, forward=45.0 kJ/molE_{\text{a, forward}} = 45.0\text{ kJ/mol}. Find the transition state energy ETSE_{\text{TS}} and the maximum possible product energy EproductsE_{\text{products}} such that the reverse activation energy is non-negative.

Answer

ETS=Ereactants+Ea, forward=30.0+45.0=75.0 kJ/molE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}} = 30.0 + 45.0 = 75.0\text{ kJ/mol}. Since Ea, reverse=ETS−Eproducts≥0E_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}} \ge 0, the maximum product energy is Eproducts, max=75.0 kJ/molE_{\text{products, max}} = 75.0\text{ kJ/mol}.

02

For a reaction with Ereactants=85.0 kJ/molE_{\text{reactants}} = 85.0\text{ kJ/mol}, Eproducts=120.0 kJ/molE_{\text{products}} = 120.0\text{ kJ/mol}, and Ea, forward=60.0 kJ/molE_{\text{a, forward}} = 60.0\text{ kJ/mol}, calculate ETSE_{\text{TS}}, Ea, reverseE_{\text{a, reverse}}, and ΔHrxn\Delta H_{\text{rxn}}.

Answer

ETS=85.0+60.0=145.0 kJ/molE_{\text{TS}} = 85.0 + 60.0 = 145.0\text{ kJ/mol}; Ea, reverse=ETS−Eproducts=145.0−120.0=25.0 kJ/molE_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}} = 145.0 - 120.0 = 25.0\text{ kJ/mol}; ΔHrxn=Eproducts−Ereactants=120.0−85.0=+35.0 kJ/mol\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}} = 120.0 - 85.0 = +35.0\text{ kJ/mol} (or 60.0−25.0=+35.0 kJ/mol60.0 - 25.0 = +35.0\text{ kJ/mol}).

03

A reaction has an enthalpy of reaction ΔHrxn=−50.0 kJ/mol\Delta H_{\text{rxn}} = -50.0\text{ kJ/mol} (exothermic) and a reverse activation energy Ea, reverse=70.0 kJ/molE_{\text{a, reverse}} = 70.0\text{ kJ/mol}. If Ereactants=110.0 kJ/molE_{\text{reactants}} = 110.0\text{ kJ/mol}, determine EproductsE_{\text{products}}, Ea, forwardE_{\text{a, forward}}, and ETSE_{\text{TS}}.

Answer

Eproducts=Ereactants+ΔHrxn=110.0+(−50.0)=60.0 kJ/molE_{\text{products}} = E_{\text{reactants}} + \Delta H_{\text{rxn}} = 110.0 + (-50.0) = 60.0\text{ kJ/mol}. Using ΔH=Ea, forward−Ea, reverse\Delta H = E_{\text{a, forward}} - E_{\text{a, reverse}}: −50.0=Ea, forward−70.0  ⟹  Ea, forward=20.0 kJ/mol-50.0 = E_{\text{a, forward}} - 70.0 \implies E_{\text{a, forward}} = 20.0\text{ kJ/mol}. Then ETS=Ereactants+Ea, forward=110.0+20.0=130.0 kJ/molE_{\text{TS}} = E_{\text{reactants}} + E_{\text{a, forward}} = 110.0 + 20.0 = 130.0\text{ kJ/mol} (check: ETS−Eproducts=130.0−60.0=70.0 kJ/molE_{\text{TS}} - E_{\text{products}} = 130.0 - 60.0 = 70.0\text{ kJ/mol}).

Loading workspace…