Resources

In an analytical chemistry laboratory, a coffee-cup calorimeter (constant pressure, P=1.00 atmP = 1.00\text{ atm}) is calibrated and used to determine the standard enthalpy of neutralization. A student mixes 50.0 mL50.0\text{ mL} of 1.00 M HCl(aq)1.00\text{ M}\text{ HCl(aq)} with 50.0 mL50.0\text{ mL} of 1.05 M NaOH(aq)1.05\text{ M}\text{ NaOH(aq)}, both initially at 22.00∘C22.00^{\circ}\text{C}. The neutralization produces liquid water according to H+(aq)+OH−(aq)→H2O(l)\text{H}^+\text{(aq)} + \text{OH}^-\text{(aq)} \to \text{H}_2\text{O(l)}. The final maximum temperature recorded by the digital probe is 28.70∘C28.70^{\circ}\text{C}. Assuming the combined solution has a density of 1.02 g/mL1.02\text{ g/mL} and a specific heat capacity of 4.18 J/(g⋅∘C)4.18\text{ J/(g}\cdot^{\circ}\text{C)}, and neglecting the heat capacity of the styrofoam cup: (a) calculate the heat absorbed by the solution qsolnq_{\text{soln}} (in kJ\text{kJ}), (b) determine the enthalpy of neutralization ΔHrxn\Delta H_{\text{rxn}} per mole of limiting reactant (in kJ/mol\text{kJ/mol}), and (c) explain why ΔHrxn=qp\Delta H_{\text{rxn}} = q_p qualifies as a state function change despite heat qq being fundamentally path-dependent.

Answer and steps

Final answer

(a) qsoln=+2.86 kJq_{\text{soln}} = +2.86\text{ kJ}; (b) ΔHrxn=−57.1 kJ/mol\Delta H_{\text{rxn}} = -57.1\text{ kJ/mol}; (c) Because enthalpy is defined as H=U+PVH = U + PV, its change ΔH\Delta H depends solely on initial and final states; at constant pressure with only P-VP\text{-}V expansion work, qp=ΔHq_p = \Delta H, constraining path-dependent heat along this specific isobaric path to equal the change in a state function.

Steps

Part (a): Calculate the Heat Absorbed by the Solution (qsolnq_{\text{soln}})

  1. Determine the total mass of the reaction mixture: The total volume of the combined solution is: Vtotal=50.0 mL+50.0 mL=100.0 mLV_{\text{total}} = 50.0\text{ mL} + 50.0\text{ mL} = 100.0\text{ mL} Using the given density (ρ=1.02 g/mL\rho = 1.02\text{ g/mL}): msoln=Vtotal⋅ρ=100.0 mL⋅1.02 g/mL=102 gm_{\text{soln}} = V_{\text{total}} \cdot \rho = 100.0\text{ mL} \cdot 1.02\text{ g/mL} = 102\text{ g}
  2. Calculate the temperature change (ΔT\Delta T): ΔT=Tfinal−Tinitial=28.70∘C−22.00∘C=6.70∘C\Delta T = T_{\text{final}} - T_{\text{initial}} = 28.70^{\circ}\text{C} - 22.00^{\circ}\text{C} = 6.70^{\circ}\text{C}
  3. Compute the heat absorbed by the solution: qsoln=msoln⋅c⋅ΔTq_{\text{soln}} = m_{\text{soln}} \cdot c \cdot \Delta T qsoln=(102 g)⋅(4.18 J/(g⋅∘C))⋅(6.70∘C)=2856.6 J=+2.86 kJq_{\text{soln}} = (102\text{ g}) \cdot (4.18\text{ J/(g}\cdot^{\circ}\text{C)}) \cdot (6.70^{\circ}\text{C}) = 2856.6\text{ J} = +2.86\text{ kJ}

Part (b): Determine the Enthalpy of Neutralization (ΔHrxn\Delta H_{\text{rxn}})

  1. Identify the limiting reactant: Calculate the moles of HX+(aq)\ce{H+(aq)} and OHX−(aq)\ce{OH-(aq)}: nHX+=(0.0500 L)⋅(1.00 mol/L)=0.0500 moln_{\ce{H+}} = (0.0500\text{ L}) \cdot (1.00\text{ mol/L}) = 0.0500\text{ mol} nOHX−=(0.0500 L)⋅(1.05 mol/L)=0.0525 moln_{\ce{OH-}} = (0.0500\text{ L}) \cdot (1.05\text{ mol/L}) = 0.0525\text{ mol} Because the stoichiometry of the neutralization is 1:11:1 (HX+(aq)+OHX−(aq)→HX2O(l)\ce{H+(aq) + OH-(aq) -> H2O(l)}), HCl\ce{HCl} is the limiting reactant, and 0.0500 mol0.0500\text{ mol} of water is formed.
  2. Calculate the heat of reaction (qrxnq_{\text{rxn}}): By the conservation of energy in an insulated calorimeter: qrxn+qsoln=0  ⟹  qrxn=−qsoln=−2856.6 J=−2.857 kJq_{\text{rxn}} + q_{\text{soln}} = 0 \implies q_{\text{rxn}} = -q_{\text{soln}} = -2856.6\text{ J} = -2.857\text{ kJ}
  3. Calculate the molar enthalpy change: ΔHrxn=qrxnnlimiting=−2.857 kJ0.0500 mol=−57.1 kJ/mol\Delta H_{\text{rxn}} = \frac{q_{\text{rxn}}}{n_{\text{limiting}}} = \frac{-2.857\text{ kJ}}{0.0500\text{ mol}} = -57.1\text{ kJ/mol}

Part (c): State Function Property of Enthalpy vs. Heat

  1. Definition of Enthalpy as a State Function: Enthalpy is defined as: H=U+PVH = U + PV Because internal energy (UU), pressure (PP), and volume (VV) are all state functions, enthalpy (HH) is also a state function. Therefore, the change ΔH\Delta H depends solely on the initial and final states of the thermodynamic system, independent of the reaction pathway.
  2. Equivalence of qpq_p to ΔH\Delta H: Heat (qq) is generally a path-dependent quantity. However, by the First Law of Thermodynamics, for a closed system undergoing only pressure-volume (P-VP\text{-}V) work: ΔU=q+w=q−PΔV\Delta U = q + w = q - P\Delta V At constant pressure (isobaric conditions, such as an open coffee-cup calorimeter): qp=ΔU+PΔV=Δ(U+PV)=ΔHq_p = \Delta U + P\Delta V = \Delta(U + PV) = \Delta H Specifying an isobaric path with only expansion work eliminates the path dependence of heat, constraining the measured heat transfer qpq_p to equal the exact change in the state function ΔH\Delta H.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to negate q_soln when determining q_rxn, reporting a positive enthalpy of reaction for an exothermic process.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=100.0 mL  ⟹  m=100.0 mL×1.02 g/mL=102 g  ⟹  ΔT=28.70∘C−22.00∘C=6.70∘C  ⟹  qsoln=102 g×4.18 J/(g⋅∘C)×6.70∘C=2857 J=2.86 kJV = 100.0\text{ mL} \implies m = 100.0\text{ mL} \times 1.02\text{ g/mL} = 102\text{ g} \implies \Delta T = 28.70^{\circ}\text{C} - 22.00^{\circ}\text{C} = 6.70^{\circ}\text{C} \implies q_{\text{soln}} = 102\text{ g} \times 4.18\text{ J/(g}\cdot^{\circ}\text{C)} \times 6.70^{\circ}\text{C} = 2857\text{ J} = 2.86\text{ kJ}

  2. Step 2

    n(HCl)=0.0500 L×1.00 M=0.0500 mol  ⟹  n(NaOH)=0.0500 L×1.05 M=0.0525 mol  ⟹  HCl is limiting with 0.0500 moln(\ce{HCl}) = 0.0500\text{ L} \times 1.00\text{ M} = 0.0500\text{ mol} \implies n(\ce{NaOH}) = 0.0500\text{ L} \times 1.05\text{ M} = 0.0525\text{ mol} \implies \ce{HCl}\text{ is limiting with }0.0500\text{ mol}

  3. Step 3

    ΔHrxn=qsolnn=2.86 kJ0.0500 mol=+57.1 kJ/mol\Delta H_{\text{rxn}} = \frac{q_{\text{soln}}}{n} = \frac{2.86\text{ kJ}}{0.0500\text{ mol}} = +57.1\text{ kJ/mol}

    Correct

    qrxn=−qsoln=−2.86 kJ  ⟹  ΔHrxn=qrxnn=−2.86 kJ0.0500 mol=−57.1 kJ/molq_{\text{rxn}} = -q_{\text{soln}} = -2.86\text{ kJ} \implies \Delta H_{\text{rxn}} = \frac{q_{\text{rxn}}}{n} = \frac{-2.86\text{ kJ}}{0.0500\text{ mol}} = -57.1\text{ kJ/mol}

    You substituted qsolnq_{\text{soln}} directly instead of qrxnq_{\text{rxn}}. Because the reaction released heat to warm the surroundings (the solution), energy conservation requires qrxn=−qsoln=−2.86 kJq_{\text{rxn}} = -q_{\text{soln}} = -2.86\text{ kJ}, giving ΔHrxn=−57.1 kJ/mol\Delta H_{\text{rxn}} = -57.1\text{ kJ/mol}.

  4. Step 4

    At constant pressure with expansion work only, dH=dU+P dV=dqp, which equates heat transferred along this specific path to the difference between state functions Hfinal and Hinitial.\text{At constant pressure with expansion work only, } dH = dU + P\,dV = dq_p\text{, which equates heat transferred along this specific path to the difference between state functions } H_{\text{final}} \text{ and } H_{\text{initial}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the mass of the solution and the heat absorbed by the calorimeter contents.

You identified the limiting reactant and its molar amount accurately.

You clearly explained why heat transfer at constant pressure equals enthalpy change.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Calorimetry system-surroundings sign error

You used qsolnq_{\text{soln}} in place of qrxnq_{\text{rxn}} when finding ΔHrxn\Delta H_{\text{rxn}}, forgetting the negative sign between system and surroundings.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the thermodynamic system (the reacting species) with the immediate surroundings (the solvent/solution). An observed increase in solution temperature indicates that the reaction transferred thermal energy outward, meaning qrxn<0q_{\text{rxn}} < 0 and ΔH<0\Delta H < 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
System vs. Surroundings Sign Rule
  • By the First Law of Thermodynamics in an insulated calorimeter, qsystem+qsurroundings=0q_{\text{system}} + q_{\text{surroundings}} = 0, so qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}}.

  • Whenever ΔT>0\Delta T > 0, verify that ΔHrxn\Delta H_{\text{rxn}} is negative to reflect an exothermic reaction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that the thermometer measures the temperature of the surroundings (solution), where ΔT>0\Delta T > 0 means the solution gained heat (qsoln=+2.86 kJq_{\text{soln}} = +2.86\text{ kJ}).

  2. Apply energy conservation between system and surroundings: qrxn=−qsoln=−2.86 kJq_{\text{rxn}} = -q_{\text{soln}} = -2.86\text{ kJ}.

  3. Divide qrxnq_{\text{rxn}} by the moles of limiting reactant: ΔHrxn=−2.86 kJ0.0500 mol=−57.1 kJ/mol\Delta H_{\text{rxn}} = \frac{-2.86\text{ kJ}}{0.0500\text{ mol}} = -57.1\text{ kJ/mol}.

Final answer

(a) qsoln=+2.86 kJq_{\text{soln}} = +2.86\text{ kJ}; (b) ΔHrxn=−57.1 kJ/mol\Delta H_{\text{rxn}} = -57.1\text{ kJ/mol}; (c) ΔH=qp\Delta H = q_p because under isobaric conditions with only P-VP\text{-}V work, qp=Δ(U+PV)=ΔHq_p = \Delta(U + PV) = \Delta H, constraining path-dependent heat to a state function change.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always explicitly state qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}} as a separate line before dividing by moles.

  • Perform a physical reasonableness check: a temperature increase must always yield a negative enthalpy change (exothermic).

OverviewACEpath Teacher's Diagnosis

02 The student calculates the mass of the solution using only 50.0 mL rather than the combined total volume of 100.0 mL.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=50.0 mL×1.02 g/mL=51.0 gm = 50.0\text{ mL} \times 1.02\text{ g/mL} = 51.0\text{ g}

    Correct

    msoln=(50.0 mL+50.0 mL)×1.02 g/mL=100.0 mL×1.02 g/mL=102 gm_{\text{soln}} = (50.0\text{ mL} + 50.0\text{ mL}) \times 1.02\text{ g/mL} = 100.0\text{ mL} \times 1.02\text{ g/mL} = 102\text{ g}

    You calculated the solution mass using only the 50.0 mL50.0\text{ mL} volume of one reactant rather than combining the volumes of both mixed solutions (50.0 mL+50.0 mL=100.0 mL50.0\text{ mL} + 50.0\text{ mL} = 100.0\text{ mL}).

  2. Step 2

    ΔT=28.70∘C−22.00∘C=6.70∘C  ⟹  qsoln=51.0 g×4.18 J/(g⋅∘C)×6.70∘C=1428 J=1.43 kJ\Delta T = 28.70^{\circ}\text{C} - 22.00^{\circ}\text{C} = 6.70^{\circ}\text{C} \implies q_{\text{soln}} = 51.0\text{ g} \times 4.18\text{ J/(g}\cdot^{\circ}\text{C)} \times 6.70^{\circ}\text{C} = 1428\text{ J} = 1.43\text{ kJ}

    Correct

    qsoln=(102 g)×(4.18 J/(g⋅∘C))×(6.70∘C)=2856.6 J=+2.86 kJq_{\text{soln}} = (102\text{ g}) \times (4.18\text{ J/(g}\cdot^{\circ}\text{C)}) \times (6.70^{\circ}\text{C}) = 2856.6\text{ J} = +2.86\text{ kJ}

    Your temperature difference and heat capacity formulas are correct, but the final numerical value of qsolnq_{\text{soln}} is halved because it relies on the incorrect mass from Step 1.

  3. Step 3

    n(HCl)=0.0500 L×1.00 M=0.0500 mol  ⟹  n(NaOH)=0.0500 L×1.05 M=0.0525 mol  ⟹  HCl is limiting reactant with 0.0500 moln(\text{HCl}) = 0.0500\text{ L} \times 1.00\text{ M} = 0.0500\text{ mol} \implies n(\text{NaOH}) = 0.0500\text{ L} \times 1.05\text{ M} = 0.0525\text{ mol} \implies \text{HCl is limiting reactant with } 0.0500\text{ mol}

  4. Step 4

    qrxn=−1.43 kJ  ⟹  ΔHrxn=−1.43 kJ/0.0500 mol=−28.6 kJ/molq_{\text{rxn}} = -1.43\text{ kJ} \implies \Delta H_{\text{rxn}} = -1.43\text{ kJ} / 0.0500\text{ mol} = -28.6\text{ kJ/mol}

    Correct

    qrxn=−2.857 kJ  ⟹  ΔHrxn=−2.857 kJ0.0500 mol=−57.1 kJ/molq_{\text{rxn}} = -2.857\text{ kJ} \implies \Delta H_{\text{rxn}} = \frac{-2.857\text{ kJ}}{0.0500\text{ mol}} = -57.1\text{ kJ/mol}

    You correctly applied qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}} and divided by the limiting moles, but the result inherits the halved heat value from Step 1.

  5. Step 5

    Under constant pressure, qp=ΔHq_p = \Delta H because HH is defined as U+PVU + PV, meaning heat flow at constant pressure directly equals the difference between two state functions.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the temperature change ΔT=6.70∘C\Delta T = 6.70^{\circ}\text{C} from the initial and maximum temperatures.

You accurately determined the moles of both reactants and identified HCl\text{HCl} as the limiting reactant.

You applied the correct sign convention qrxn=−qsolnq_{\text{rxn}} = -q_{\text{soln}} for an insulated calorimeter.

You provided a solid thermodynamic rationale showing that qp=ΔHq_p = \Delta H due to the state function definition H=U+PVH = U + PV.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Total solution volume omission

You used only the volume of one reactant solution (50.0 mL50.0\text{ mL}) when finding the solution mass, rather than adding both solution volumes together (100.0 mL100.0\text{ mL}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In mixing calorimetry, the entire liquid contents of the calorimeter absorb the released reaction heat. Failing to sum the reactant volumes (Vtotal=Vacid+VbaseV_{\text{total}} = V_{\text{acid}} + V_{\text{base}}) halves the mass term in q=mcΔTq = mc\Delta T, which then propagates into the molar enthalpy calculation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Combined Solution Volume
  • When mixing multiple aqueous solutions in a calorimeter, Vtotal=∑ViV_{\text{total}} = \sum V_i.

  • Always add all mixed volumes together before multiplying by the density to find the total solution mass.

Calorimeter System Scope
  • The mass in q=mcΔTq = mc\Delta T must represent all matter undergoing the temperature change.

  • Check that the mass reflects the entire liquid mixture inside the cup, not just one of the starting reagents.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the total volume of the combined mixture: Vtotal=50.0 mL+50.0 mL=100.0 mLV_{\text{total}} = 50.0\text{ mL} + 50.0\text{ mL} = 100.0\text{ mL}.

  2. Calculate the total mass using the given density: msoln=100.0 mL×1.02 g/mL=102 gm_{\text{soln}} = 100.0\text{ mL} \times 1.02\text{ g/mL} = 102\text{ g}.

  3. Compute the heat absorbed by the solution: qsoln=(102 g)(4.18 J/(g⋅∘C))(6.70∘C)=2856.6 J=+2.86 kJq_{\text{soln}} = (102\text{ g})(4.18\text{ J/(g}\cdot^{\circ}\text{C)})(6.70^{\circ}\text{C}) = 2856.6\text{ J} = +2.86\text{ kJ}.

  4. Relate solution heat to reaction heat: qrxn=−qsoln=−2.857 kJq_{\text{rxn}} = -q_{\text{soln}} = -2.857\text{ kJ}.

  5. Divide by the moles of limiting reactant: ΔHrxn=−2.857 kJ0.0500 mol=−57.1 kJ/mol\Delta H_{\text{rxn}} = \frac{-2.857\text{ kJ}}{0.0500\text{ mol}} = -57.1\text{ kJ/mol}.

Final answer

(a) qsoln=+2.86 kJq_{\text{soln}} = +2.86\text{ kJ}; (b) ΔHrxn=−57.1 kJ/mol\Delta H_{\text{rxn}} = -57.1\text{ kJ/mol}; (c) Because H=U+PVH = U + PV is composed of state functions, ΔH\Delta H depends solely on initial and final states; at constant pressure with expansion work only, qp=ΔHq_p = \Delta H, equating heat flow along this path to a state function change.

NEXT STEPS
Final Takeaways from Your Teacher
  • In future solution calorimetry problems, write down Vtotal=V1+V2V_{\text{total}} = V_1 + V_2 as your very first step before calculating mass.

  • Practice mixing problems involving unequal volumes or added solid solutes to solidify your accounting of total calorimeter mass.

OverviewACEpath Teacher's Diagnosis

03 The student divides the heat of reaction by the total moles of both reactants combined rather than the moles of the limiting reactant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=50.0 mL+50.0 mL=100.0 mL  ⟹  m=100.0 mL×1.02 g/mL=102 g  ⟹  ΔT=28.70∘C−22.00∘C=6.70∘C  ⟹  qsoln=102 g×4.18 J/(g⋅∘C)×6.70∘C=2857 J=2.86 kJV = 50.0\text{ mL} + 50.0\text{ mL} = 100.0\text{ mL} \implies m = 100.0\text{ mL} \times 1.02\text{ g/mL} = 102\text{ g} \implies \Delta T = 28.70^{\circ}\text{C} - 22.00^{\circ}\text{C} = 6.70^{\circ}\text{C} \implies q_{\text{soln}} = 102\text{ g} \times 4.18\text{ J/(g}\cdot^{\circ}\text{C)} \times 6.70^{\circ}\text{C} = 2857\text{ J} = 2.86\text{ kJ}

  2. Step 2

    n(HCl)=0.0500 L×1.00 M=0.0500 mol  ⟹  n(NaOH)=0.0500 L×1.05 M=0.0525 moln(\ce{HCl}) = 0.0500\text{ L} \times 1.00\text{ M} = 0.0500\text{ mol} \implies n(\ce{NaOH}) = 0.0500\text{ L} \times 1.05\text{ M} = 0.0525\text{ mol}

  3. Step 3

    ntotal=0.0500 mol+0.0525 mol=0.1025 mol  ⟹  qrxn=−2.86 kJ  ⟹  ΔHrxn=−2.86 kJ/0.1025 mol=−27.9 kJ/moln_{\text{total}} = 0.0500\text{ mol} + 0.0525\text{ mol} = 0.1025\text{ mol} \implies q_{\text{rxn}} = -2.86\text{ kJ} \implies \Delta H_{\text{rxn}} = -2.86\text{ kJ}/0.1025\text{ mol} = -27.9\text{ kJ/mol}

    Correct

    HCl\ce{HCl} is limiting (0.0500 mol<0.0525 mol0.0500\text{ mol} < 0.0525\text{ mol}). ΔHrxn=qrxnnlimiting=−2.857 kJ0.0500 mol=−57.1 kJ/mol\Delta H_{\text{rxn}} = \frac{q_{\text{rxn}}}{n_{\text{limiting}}} = \frac{-2.857\text{ kJ}}{0.0500\text{ mol}} = -57.1\text{ kJ/mol}

    You summed the moles of acid and base to get 0.1025 mol0.1025\text{ mol}. In calorimetry, standard molar enthalpy is defined per mole of reaction turnover (or per mole of the limiting reactant that completely reacts), which is 0.0500 mol0.0500\text{ mol} of HCl\ce{HCl}.

  4. Step 4

    "Because pressure is kept constant and only PV work is done, ΔH=qp\Delta H = q_p, restricting the path so that heat transfer equals the difference between initial and final state functions."

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the mass, temperature increase, and heat absorbed by the calorimeter solution.

You found the exact initial molar quantities of both hydrochloric acid and sodium hydroxide.

You clearly articulated why constant pressure links heat transfer to an enthalpy change.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Calorimetry Molar Enthalpy Normalization

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the molar denominator for ΔHrxn\Delta H_{\text{rxn}} as the sum of all moles in the mixture rather than the stoichiometric moles of reaction dictated by the limiting reactant.

REASONING PATH
Your ACEpath teacher’s suggested approach
Limiting Reactant Comparison
  • Compare molar quantities scaled by stoichiometric coefficients: the smaller ratio determines the maximum moles of reaction.

  • Identify that HCl\ce{HCl} (0.0500 mol0.0500\text{ mol}) runs out before NaOH\ce{NaOH} (0.0525 mol0.0525\text{ mol}), so only 0.0500 mol0.0500\text{ mol} of neutralization occurs.

Molar Enthalpy Denominator
  • Molar enthalpy change ΔHrxn=qrxnnrxn\Delta H_{\text{rxn}} = \frac{q_{\text{rxn}}}{n_{\text{rxn}}}, where nrxnn_{\text{rxn}} is the extent of reaction (moles of limiting reactant consumed per unit stoichiometric coefficient).

  • Divide qrxn=−2.857 kJq_{\text{rxn}} = -2.857\text{ kJ} by 0.0500 mol0.0500\text{ mol}, never by the sum of reactant moles.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the moles of reactants: n(HCl)=0.0500 moln(\ce{HCl}) = 0.0500\text{ mol} and n(NaOH)=0.0525 moln(\ce{NaOH}) = 0.0525\text{ mol}. Because the reaction ratio is 1:11:1, HCl\ce{HCl} is the limiting reactant (nlimiting=0.0500 moln_{\text{limiting}} = 0.0500\text{ mol}).

  2. Use the conservation of energy to find qrxn=−qsoln=−2.857 kJq_{\text{rxn}} = -q_{\text{soln}} = -2.857\text{ kJ}.

  3. Calculate molar enthalpy: ΔHrxn=qrxnnlimiting=−2.857 kJ0.0500 mol=−57.1 kJ/mol\Delta H_{\text{rxn}} = \frac{q_{\text{rxn}}}{n_{\text{limiting}}} = \frac{-2.857\text{ kJ}}{0.0500\text{ mol}} = -57.1\text{ kJ/mol}.

Final answer

(a) qsoln=+2.86 kJq_{\text{soln}} = +2.86\text{ kJ}; (b) ΔHrxn=−57.1 kJ/mol\Delta H_{\text{rxn}} = -57.1\text{ kJ/mol}; (c) At constant pressure with only P-VP\text{-}V work, qp=ΔHq_p = \Delta H, which links path-dependent heat along this specific path to the change in the state function HH.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the balanced chemical equation and label which reactant is limiting before calculating ΔHrxn\Delta H_{\text{rxn}}.

  • Remember that ΔH\Delta H has units of kJ/mol of reaction\text{kJ/mol of reaction}; the denominator is never the total sum of all reactant moles.

Lock it in

Similar question

01

A student dissolves 4.00 g4.00\text{ g} of NHX4NOX3(s)\ce{NH4NO3(s)} (molar mass 80.05 g/mol80.05\text{ g/mol}) in 50.0 g50.0\text{ g} of water in a coffee-cup calorimeter. The temperature drops from 25.0∘C25.0^{\circ}\text{C} to 19.2∘C19.2^{\circ}\text{C}. Assuming c=4.18 J/(g⋅∘C)c = 4.18\text{ J/(g}\cdot^{\circ}\text{C)} and mtotal=54.0 gm_{\text{total}} = 54.0\text{ g}, calculate ΔHsoln\Delta H_{\text{soln}} in kJ/mol\text{kJ/mol}.

Answer

ΔHsoln=+26.2 kJ/mol\Delta H_{\text{soln}} = +26.2\text{ kJ/mol}. Key steps: ΔT=19.2−25.0=−5.8∘C\Delta T = 19.2 - 25.0 = -5.8^{\circ}\text{C}; qsoln=(54.0 g)(4.18 J/g∘C)(−5.8∘C)=−1.309 kJq_{\text{soln}} = (54.0\text{ g})(4.18\text{ J/g}^{\circ}\text{C})(-5.8^{\circ}\text{C}) = -1.309\text{ kJ}; qrxn=−qsoln=+1.309 kJq_{\text{rxn}} = -q_{\text{soln}} = +1.309\text{ kJ}; n=4.00 g/80.05 g/mol=0.0500 moln = 4.00\text{ g} / 80.05\text{ g/mol} = 0.0500\text{ mol}; ΔHsoln=+1.309 kJ0.0500 mol=+26.2 kJ/mol\Delta H_{\text{soln}} = \frac{+1.309\text{ kJ}}{0.0500\text{ mol}} = +26.2\text{ kJ/mol}.

02

In a calorimeter, 100.0 mL100.0\text{ mL} of 0.500 M H2SO40.500\text{ M}\text{ H2SO4} is mixed with 100.0 mL100.0\text{ mL} of 1.00 M KOH1.00\text{ M}\text{ KOH}, both at 21.0∘C21.0^{\circ}\text{C}. The reaction is HX2SOX4(aq)+2 KOH(aq)→KX2SOX4(aq)+2 HX2O(l)\ce{H2SO4(aq) + 2KOH(aq) -> K2SO4(aq) + 2H2O(l)}. The final temperature is 27.8∘C27.8^{\circ}\text{C}. Total mass is 200.0 g200.0\text{ g} and c=4.18 J/(g⋅∘C)c = 4.18\text{ J/(g}\cdot^{\circ}\text{C)}. Calculate ΔH\Delta H per mole of HX2O(l)\ce{H2O(l)} formed.

Answer

ΔH=−56.8 kJ/mol H2O\Delta H = -56.8\text{ kJ/mol H2O}. Key steps: n(HX2SOX4)=0.0500 moln(\ce{H2SO4}) = 0.0500\text{ mol}, n(KOH)=0.100 moln(\ce{KOH}) = 0.100\text{ mol} (equimolar stoichiometric reaction producing 0.100 mol H2O0.100\text{ mol H2O}); ΔT=+6.8∘C\Delta T = +6.8^{\circ}\text{C}; qsoln=(200.0 g)(4.18 J/g∘C)(6.8∘C)=+5.685 kJq_{\text{soln}} = (200.0\text{ g})(4.18\text{ J/g}^{\circ}\text{C})(6.8^{\circ}\text{C}) = +5.685\text{ kJ}; qrxn=−5.685 kJq_{\text{rxn}} = -5.685\text{ kJ}; ΔH=−5.685 kJ0.100 mol H2O=−56.8 kJ/mol\Delta H = \frac{-5.685\text{ kJ}}{0.100\text{ mol H2O}} = -56.8\text{ kJ/mol}.

03

Under constant atmospheric pressure (1.00 atm1.00\text{ atm}), a gaseous reaction releases 45.0 kJ45.0\text{ kJ} of heat while expanding from 10.0 L10.0\text{ L} to 25.0 L25.0\text{ L}. Calculate (a) the work done ww (in kJ\text{kJ}, using 1 L⋅atm=101.3 J1\text{ L}\cdot\text{atm} = 101.3\text{ J}), (b) the internal energy change ΔU\Delta U, and (c) the enthalpy change ΔH\Delta H.

Answer

(a) w=−1.52 kJw = -1.52\text{ kJ}, (b) ΔU=−46.5 kJ\Delta U = -46.5\text{ kJ}, (c) ΔH=−45.0 kJ\Delta H = -45.0\text{ kJ}. Key steps: w=−PΔV=−(1.00 atm)(15.0 L)=−15.0 L⋅atm=−1.52 kJw = -P\Delta V = -(1.00\text{ atm})(15.0\text{ L}) = -15.0\text{ L}\cdot\text{atm} = -1.52\text{ kJ}; heat released means qp=−45.0 kJq_p = -45.0\text{ kJ}; ΔU=q+w=−45.0+(−1.52)=−46.5 kJ\Delta U = q + w = -45.0 + (-1.52) = -46.5\text{ kJ}; since pressure is constant, ΔH=qp=−45.0 kJ\Delta H = q_p = -45.0\text{ kJ}.

Loading workspace…