Resources

A volatile cleaning solvent contains 1-propanol (C3H7OH\text{C}_3\text{H}_7\text{OH}, molar mass 60.10 g/mol60.10\text{ g/mol}). A gas chromatography laboratory reports the headspace vapor concentration of 1-propanol in a sealed container at 25.0∘C25.0^\circ\text{C} as 68.4 mg/L68.4\text{ mg/L}. (a) Convert this concentration to the partial vapor pressure of 1-propanol in millimeters of mercury (mmHg\text{mmHg}), using the ideal gas constant R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm/(mol}\cdot\text{K)} and 1 atm=760 mmHg1\text{ atm} = 760\text{ mmHg}. (b) If acetone (CH3COCH3\text{CH}_3\text{COCH}_3, molar mass 58.08 g/mol58.08\text{ g/mol}) has a measured vapor pressure of 231 mmHg231\text{ mmHg} under identical conditions, convert acetone's vapor pressure into mg/L\text{mg/L} and explain why its equilibrium headspace mass is dramatically higher despite having a nearly identical molar mass.

Answer and steps

Final answer

(a) P1-propanol=21.2 mmHgP_{\text{1-propanol}} = 21.2\text{ mmHg}; (b) Concentration of acetone =724 mg/L= 724\text{ mg/L}; Although both molecules have similar molar masses (≈58–60 g/mol\approx 58\text{--}60\text{ g/mol}) and comparable dispersion forces, 1-propanol exhibits strong intermolecular hydrogen bonding via its terminal −OH-\text{OH} group, whereas acetone exhibits only weaker dipole-dipole attractions and dispersion forces, giving acetone a substantially higher volatility and vapor concentration.

Steps

Part (a): Determining the Partial Vapor Pressure of 1-Propanol

  1. Convert mass concentration to molar concentration (n/Vn/V): The given headspace vapor concentration of 1-propanol (CX3HX7OH\ce{C3H7OH}) is 68.4 mg/L68.4\text{ mg/L}. Convert this value into grams per liter, then divide by its molar mass (M=60.10 g/molM = 60.10\text{ g/mol}): Mass concentration=68.4 mg/L=0.0684 g/L\text{Mass concentration} = 68.4\text{ mg/L} = 0.0684\text{ g/L} nV=0.0684 g/L60.10 g/mol≈1.138×10−3 mol/L\frac{n}{V} = \frac{0.0684\text{ g/L}}{60.10\text{ g/mol}} \approx 1.138 \times 10^{-3}\text{ mol/L}
  2. Calculate partial pressure using the ideal gas law: Convert the temperature to Kelvin: T=25.0∘C+273.15=298.15 KT = 25.0^\circ\text{C} + 273.15 = 298.15\text{ K} Applying P=(nV)RTP = \left(\frac{n}{V}\right)RT: P1-propanol=(1.138×10−3 mol/L)⋅(0.08206 L⋅atm/(mol⋅K))⋅(298.15 K)≈0.02784 atmP_{\text{1-propanol}} = (1.138 \times 10^{-3}\text{ mol/L}) \cdot \left(0.08206\text{ L}\cdot\text{atm/(mol}\cdot\text{K)}\right) \cdot (298.15\text{ K}) \approx 0.02784\text{ atm}
  3. Convert pressure to mmHg\text{mmHg}: P1-propanol=0.02784 atm×760 mmHg/atm≈21.2 mmHgP_{\text{1-propanol}} = 0.02784\text{ atm} \times 760\text{ mmHg/atm} \approx 21.2\text{ mmHg}

Part (b): Vapor Concentration of Acetone and Intermolecular Force Comparison

  1. Calculate the headspace mass concentration of acetone:

    • Convert measured vapor pressure to atmospheres: Pacetone=231 mmHg760 mmHg/atm≈0.3039 atmP_{\text{acetone}} = \frac{231\text{ mmHg}}{760\text{ mmHg/atm}} \approx 0.3039\text{ atm}
    • Determine molar concentration: nV=PRT=0.3039 atm(0.08206 L⋅atm/(mol⋅K))⋅(298.15 K)≈0.01243 mol/L\frac{n}{V} = \frac{P}{RT} = \frac{0.3039\text{ atm}}{(0.08206\text{ L}\cdot\text{atm/(mol}\cdot\text{K)}) \cdot (298.15\text{ K})} \approx 0.01243\text{ mol/L}
    • Multiply by the molar mass of acetone (M=58.08 g/molM = 58.08\text{ g/mol}) to find the mass concentration in mg/L\text{mg/L}: Concentration=0.01243 mol/L⋅58.08 g/mol≈0.722 g/L≈724 mg/L\text{Concentration} = 0.01243\text{ mol/L} \cdot 58.08\text{ g/mol} \approx 0.722\text{ g/L} \approx 724\text{ mg/L} (Note: Variations between 722 mg/L722\text{ mg/L} and 724 mg/L724\text{ mg/L} arise from minor differences in intermediate rounding of conversion factors).
  2. Intermolecular Force (IMF) Analysis:

    • London Dispersion Forces: Both molecules have very similar molar masses (60.10 g/mol60.10\text{ g/mol} for 1-propanol vs. 58.08 g/mol58.08\text{ g/mol} for acetone) and identical numbers of heavy atoms (three carbon atoms and one oxygen atom), meaning their dispersion forces are comparable.
    • Dipole-Dipole Attractions: Acetone (CHX3COCHX3\ce{CH3COCH3}) has a polar carbonyl group (C=O\ce{C=O}), leading to dipole-dipole attractions. However, because it lacks an H\ce{H} atom bonded directly to an electronegative atom (O\ce{O}, N\ce{N}, or F\ce{F}), pure acetone cannot form intermolecular hydrogen bonds with itself.
    • Hydrogen Bonding: 1-Propanol contains a hydroxyl group (−OH-\ce{OH}), enabling molecules to form extensive, strong intermolecular hydrogen bonds in the liquid state.
    • Conclusion: The significantly stronger hydrogen bonding network in 1-propanol requires far more energy to overcome, keeping molecules predominantly in the liquid phase and yielding a low vapor pressure (21.2 mmHg21.2\text{ mmHg}). In contrast, acetone's weaker dipole-dipole and dispersion forces allow molecules to escape readily into the vapor phase, resulting in a dramatically higher vapor pressure (231 mmHg231\text{ mmHg}) and vapor concentration (724 mg/L724\text{ mg/L}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert milligrams to grams when finding the molar concentration, resulting in a vapor pressure that is 1000 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    nV=68.460.10=1.138 mol/L\frac{n}{V} = \frac{68.4}{60.10} = 1.138\text{ mol/L}

    Correct

    nV=0.0684 g/L60.10 g/mol=1.138×10−3 mol/L\frac{n}{V} = \frac{0.0684\text{ g/L}}{60.10\text{ g/mol}} = 1.138 \times 10^{-3}\text{ mol/L}

    Molar mass is given in g/mol\text{g/mol}, so the mass concentration must be expressed in grams per liter (g/L\text{g/L}) before dividing by molar mass. Since 68.4 mg/L=0.0684 g/L68.4\text{ mg/L} = 0.0684\text{ g/L}, the molar concentration should be 1.138×10−3 mol/L1.138 \times 10^{-3}\text{ mol/L}.

  2. Step 2

    T=25.0+273.15=298.15 K  ⟹  P=(1.138)(0.08206)(298.15)=27.84 atm  ⟹  P=27.84×760=21200 mmHgT = 25.0 + 273.15 = 298.15\text{ K} \implies P = (1.138)(0.08206)(298.15) = 27.84\text{ atm} \implies P = 27.84 \times 760 = 21200\text{ mmHg}

    Correct

    P=(1.138×10−3 mol/L)(0.08206 L⋅atm/(mol⋅K))(298.15 K)×760 mmHg/atm=21.2 mmHgP = (1.138 \times 10^{-3}\text{ mol/L})(0.08206\text{ L}\cdot\text{atm/(mol}\cdot\text{K)})(298.15\text{ K}) \times 760\text{ mmHg/atm} = 21.2\text{ mmHg}

    Your application of P=(nV)RTP = \left(\frac{n}{V}\right)RT and the conversion from atmospheres to millimeters of mercury were carried out correctly, but the result was scaled up by a factor of 1000 due to the unit error in Step 1.

  3. Step 3

    P=231760=0.3039 atm  ⟹  nV=0.30390.08206×298.15=0.01242 mol/L  ⟹  mass=0.01242×58.08×1000=721 mg/LP = \frac{231}{760} = 0.3039\text{ atm} \implies \frac{n}{V} = \frac{0.3039}{0.08206 \times 298.15} = 0.01242\text{ mol/L} \implies \text{mass} = 0.01242 \times 58.08 \times 1000 = 721\text{ mg/L}

  4. Step 4

    1-propanol forms intermolecular hydrogen bonds which are much stronger than the dipole-dipole forces in acetone, so less 1-propanol enters the vapor phase.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the ideal gas law in concentration form, P=(nV)RTP = \left(\frac{n}{V}\right)RT.

You correctly converted between atmospheres and millimeters of mercury using 1 atm=760 mmHg1\text{ atm} = 760\text{ mmHg}.

You correctly converted Celsius to Kelvin.

You successfully performed the multi-step reverse calculation for acetone, including the conversion back to milligrams.

You correctly identified that hydrogen bonding in 1-propanol is much stronger than dipole-dipole forces in acetone, directly explaining the difference in volatility.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Oversight (Metric Prefix)

You divided milligrams per liter directly by grams per mole without converting milligrams to grams first.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You matched the numerical quantity 68.468.4 with the molar mass without verifying dimensional consistency between mg\text{mg} and g\text{g}. Interestingly, in Part (b) you remembered the factor of 1000 mg/g1000\text{ mg/g}, showing that you know the conversion relationship but overlooked it in the forward direction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency Check
  • Molar mass has units of g/mol\text{g/mol}. Therefore, mass must be in grams (g\text{g}) when calculating moles or molarity.

  • Always write full unit labels in your numerator and denominator: 68.4 mg/L×10−3 g/mg60.10 g/mol\frac{68.4\text{ mg/L} \times 10^{-3}\text{ g/mg}}{60.10\text{ g/mol}}.

Physical Plausibility Check
  • At room temperature, volatile organic liquids typically exhibit vapor pressures ranging from a few mmHg\text{mmHg} to a few hundred mmHg\text{mmHg}.

  • Compare your intermediate answer to atmospheric pressure (760 mmHg760\text{ mmHg}). A vapor pressure of 21200 mmHg21200\text{ mmHg} (nearly 28 atm28\text{ atm}) would indicate a supercritical or highly pressurized gas cylinder, not an ambient headspace vapor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Mass concentration in g/L=68.4 mg/L×1 g1000 mg=0.0684 g/L\text{Mass concentration in g/L} = 68.4\text{ mg/L} \times \frac{1\text{ g}}{1000\text{ mg}} = 0.0684\text{ g/L}

  2. nV=0.0684 g/L60.10 g/mol=1.138×10−3 mol/L\frac{n}{V} = \frac{0.0684\text{ g/L}}{60.10\text{ g/mol}} = 1.138 \times 10^{-3}\text{ mol/L}

  3. P=(1.138×10−3 mol/L)×0.08206 L⋅atm/(mol⋅K)×298.15 K=0.02784 atmP = \left(1.138 \times 10^{-3}\text{ mol/L}\right) \times 0.08206\text{ L}\cdot\text{atm/(mol}\cdot\text{K)} \times 298.15\text{ K} = 0.02784\text{ atm}

  4. P=0.02784 atm×760 mmHg/atm=21.2 mmHgP = 0.02784\text{ atm} \times 760\text{ mmHg/atm} = 21.2\text{ mmHg}

Final answer

(a) P1-propanol=21.2 mmHgP_{\text{1-propanol}} = 21.2\text{ mmHg}; (b) Concentration of acetone =721–724 mg/L= 721\text{--}724\text{ mg/L}; 1-propanol exhibits strong intermolecular hydrogen bonding, whereas acetone possesses only weaker dipole-dipole attractions, resulting in significantly higher volatility for acetone.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice explicitly writing out units for every factor during multi-step metric conversions.

  • Before finalizing an answer, perform a sanity check on whether a calculated gas pressure is physically reasonable for a liquid at 25∘C25^\circ\text{C}.

OverviewACEpath Teacher's Diagnosis

02 The student uses Celsius temperature instead of absolute Kelvin in the ideal gas law calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    C=68.4 mg/L=0.0684 g/L  ⟹  nV=0.068460.10=1.138×10−3 mol/LC = 68.4\text{ mg/L} = 0.0684\text{ g/L} \implies \frac{n}{V} = \frac{0.0684}{60.10} = 1.138 \times 10^{-3}\text{ mol/L}

  2. Step 2

    P=(1.138×10−3)(0.08206)(25.0)=2.335×10−3 atm  ⟹  P=2.335×10−3×760=1.77 mmHgP = (1.138 \times 10^{-3})(0.08206)(25.0) = 2.335 \times 10^{-3}\text{ atm} \implies P = 2.335 \times 10^{-3} \times 760 = 1.77\text{ mmHg}

    Correct

    T=25.0+273.15=298.15 K  ⟹  P=(1.138×10−3)(0.08206)(298.15)≈0.02784 atm  ⟹  P≈21.2 mmHgT = 25.0 + 273.15 = 298.15\text{ K} \implies P = (1.138 \times 10^{-3})(0.08206)(298.15) \approx 0.02784\text{ atm} \implies P \approx 21.2\text{ mmHg}

    You used T=25.0T = 25.0 instead of converting to Kelvin (T=298.15 KT = 298.15\text{ K}). Because the ideal gas constant RR has units involving Kelvin (K−1\text{K}^{-1}), the temperature in PV=nRTPV = nRT must always be in absolute temperature.

  3. Step 3

    P=231760=0.3039 atm  ⟹  nV=0.3039(0.08206×25.0)=0.1481 mol/L  ⟹  mass=0.1481×58.08×1000=8600 mg/LP = \frac{231}{760} = 0.3039\text{ atm} \implies \frac{n}{V} = \frac{0.3039}{(0.08206 \times 25.0)} = 0.1481\text{ mol/L} \implies \text{mass} = 0.1481 \times 58.08 \times 1000 = 8600\text{ mg/L}

    Correct

    nV=0.3039(0.08206)(298.15)≈0.01243 mol/L  ⟹  mass concentration=0.01243×58.08×1000≈722–724 mg/L\frac{n}{V} = \frac{0.3039}{(0.08206)(298.15)} \approx 0.01243\text{ mol/L} \implies \text{mass concentration} = 0.01243 \times 58.08 \times 1000 \approx 722\text{--}724\text{ mg/L}

    You repeated the temperature error here by dividing by 25.025.0 rather than 298.15 K298.15\text{ K}, which made your calculated headspace concentration roughly twelve times too large.

  4. Step 4

    1-propanol has hydrogen bonding which is stronger than dipole-dipole interactions in acetone, leading to lower volatility.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted mass concentrations between mg/L\text{mg/L} and g/L\text{g/L} using molar masses.

You accurately converted pressure between mmHg\text{mmHg} and atm\text{atm}.

You provided a sound conceptual explanation linking intermolecular forces to volatility.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Kelvin Temperature Conversion in Gas Law

You entered the given value of 25.0∘C25.0^\circ\text{C} directly into the equation PV=nRTPV = nRT without adding 273.15273.15.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the unit cancellation required by the ideal gas constant R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm/(mol}\cdot\text{K)}, where temperature must be on the absolute thermodynamic scale (Kelvin).

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Units of the Gas Constant
  • In any gas equation containing RR, look at its units: L⋅atm/(mol⋅K)\text{L}\cdot\text{atm}/(\text{mol}\cdot\text{K}).

  • Always convert temperatures to Kelvin (T(K)=T(∘C)+273.15T(\text{K}) = T(^\circ\text{C}) + 273.15) before calculating.

Order-of-Magnitude Sanity Check
  • At room temperature, RT≈(0.08206)(298.15)≈24.5 L⋅atm/molRT \approx (0.08206)(298.15) \approx 24.5\text{ L}\cdot\text{atm/mol}.

  • If your product RTRT is close to 2.052.05, you have likely used 25∘C25^\circ\text{C} instead of ≈298 K\approx 298\text{ K}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the given temperature to absolute temperature: T=25.0∘C+273.15=298.15 KT = 25.0^\circ\text{C} + 273.15 = 298.15\text{ K}.

  2. Compute the vapor pressure of 1-propanol: P=(1.138×10−3 mol/L)×(0.08206 L⋅atm/(mol⋅K))×298.15 K≈0.02784 atmP = (1.138 \times 10^{-3}\text{ mol/L}) \times (0.08206\text{ L}\cdot\text{atm/(mol}\cdot\text{K)}) \times 298.15\text{ K} \approx 0.02784\text{ atm}.

  3. Convert to mmHg\text{mmHg}: 0.02784 atm×760 mmHg/atm≈21.2 mmHg0.02784\text{ atm} \times 760\text{ mmHg/atm} \approx 21.2\text{ mmHg}.

  4. Calculate the molar concentration of acetone using T=298.15 KT = 298.15\text{ K}: nV=0.3039 atm(0.08206)(298.15 K)≈0.01243 mol/L\frac{n}{V} = \frac{0.3039\text{ atm}}{(0.08206)(298.15\text{ K})} \approx 0.01243\text{ mol/L}.

  5. Convert acetone molar concentration to mg/L\text{mg/L}: 0.01243 mol/L×58.08 g/mol×1000 mg/g≈722–724 mg/L0.01243\text{ mol/L} \times 58.08\text{ g/mol} \times 1000\text{ mg/g} \approx 722\text{--}724\text{ mg/L}.

Final answer

(a) P1-propanol=21.2 mmHgP_{\text{1-propanol}} = 21.2\text{ mmHg}; (b) Concentration of acetone ≈724 mg/L\approx 724\text{ mg/L}; 1-propanol has intermolecular hydrogen bonding, which is substantially stronger than the dipole-dipole attractions in acetone, causing 1-propanol to be far less volatile.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice double-checking that every temperature variable in ideal gas formulas has been converted to Kelvin.

  • Reinforce unit-cancellation checks by writing out full dimensional analysis units alongside numbers in scratch work.

OverviewACEpath Teacher's Diagnosis

03 The student confuses intermolecular forces with intramolecular covalent bonds, claiming 1-propanol has stronger covalent bonds that hold the liquid together.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    c=68.4 mg/L=0.0684 g/L  ⟹  n/V=0.068460.10=1.138×10−3 mol/L  ⟹  T=25.0+273.15=298.15 K  ⟹  P=(1.138×10−3)(0.08206)(298.15)=0.02785 atm  ⟹  P=0.02785×760=21.2 mmHgc = 68.4\text{ mg/L} = 0.0684\text{ g/L} \implies n/V = \frac{0.0684}{60.10} = 1.138 \times 10^{-3}\text{ mol/L} \implies T = 25.0 + 273.15 = 298.15\text{ K} \implies P = (1.138 \times 10^{-3})(0.08206)(298.15) = 0.02785\text{ atm} \implies P = 0.02785 \times 760 = 21.2\text{ mmHg}

  2. Step 2

    P=231760=0.3039 atm  ⟹  T=298.15 K  ⟹  n/V=0.3039(0.08206×298.15)=0.01242 mol/L  ⟹  mass=0.01242×58.08×1000=721 mg/LP = \frac{231}{760} = 0.3039\text{ atm} \implies T = 298.15\text{ K} \implies n/V = \frac{0.3039}{(0.08206 \times 298.15)} = 0.01242\text{ mol/L} \implies \text{mass} = 0.01242 \times 58.08 \times 1000 = 721\text{ mg/L}

  3. Step 3

    1-propanol has stronger covalent bonds between its atoms than acetone, so more covalent bonds must be broken to turn 1-propanol into a gas.

    Correct

    Both molecules have similar molar masses and comparable London dispersion forces. However, 1-propanol molecules can form strong intermolecular hydrogen bonds via their −OH-\ce{OH} groups, whereas acetone molecules interact only via weaker dipole-dipole attractions. Covalent bonds are intramolecular and remain intact during vaporization; only intermolecular forces are disrupted.

    Vaporization is a physical change that overcomes intermolecular attractions between separate molecules, not the intramolecular covalent bonds holding individual molecules together.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted units between mg/L\text{mg/L}, g/L\text{g/L}, and mol/L\text{mol/L} accurately.

You applied the ideal gas law correctly to determine both pressure and molar density.

You correctly used conversion factors between atmospheres and mmHg\text{mmHg}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Intermolecular vs Intramolecular Misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused intramolecular covalent bonds with intermolecular forces, assuming that phase changes involve breaking covalent bonds within molecules rather than overcoming attractions between molecules.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Phase Changes vs. Chemical Reactions
  • Phase changes (vaporization, melting) disrupt only non-covalent intermolecular forces (IMFs). Covalent bonds within the molecules remain completely intact.

  • When explaining differences in boiling points or vapor pressures, compare the types of intermolecular forces (dispersion, dipole-dipole, hydrogen bonding) rather than covalent bond strengths.

Hydrogen Bonding Requirements
  • Intermolecular hydrogen bonding occurs between pure molecules when a hydrogen atom is covalently bonded directly to N\ce{N}, O\ce{O}, or F\ce{F}.

  • Check molecular structures: 1-propanol possesses an −OH-\ce{OH} group capable of hydrogen bonding, while acetone lacks an H\ce{H} bonded to its oxygen atom and can only engage in dipole-dipole interactions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that vaporizing a liquid breaks intermolecular attractions between neighboring molecules, not the covalent bonds within each molecule.

  2. Compare the intermolecular forces of the two substances: both have comparable London dispersion forces due to similar molar masses (≈58–60 g/mol\approx 58\text{--}60\text{ g/mol}).

  3. Determine the dominant specific force: 1-propanol exhibits strong intermolecular hydrogen bonding via its −OH-\ce{OH} group, whereas acetone only exhibits weaker dipole-dipole forces from its carbonyl group (C=O\ce{C=O}).

  4. Conclude that because 1-propanol requires significantly more energy to overcome its hydrogen bonds, far fewer molecules escape into the vapor phase, giving it a much lower equilibrium vapor pressure and headspace concentration.

Final answer

(a) P1-propanol=21.2 mmHgP_{\text{1-propanol}} = 21.2\text{ mmHg}; (b) Concentration of acetone =721–724 mg/L= 721\text{--}724\text{ mg/L}; 1-propanol exhibits strong intermolecular hydrogen bonding, whereas acetone exhibits only weaker dipole-dipole and dispersion attractions. Because phase change overcomes intermolecular forces rather than covalent bonds, acetone vaporizes much more readily.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between intramolecular forces (covalent/ionic bonds inside molecules) and intermolecular forces (attractions between separate molecules).

  • Practice identifying the strongest intermolecular force present in pure samples of organic molecules by checking for −OH-\ce{OH}, −NH-\ce{NH}, or polar carbonyl groups.

  • Solve comparative physical-property problems relating vapor pressure, boiling point, and volatility to intermolecular force strength.

Lock it in

Similar question

01

The headspace vapor concentration of ethanol (C2H5OH\text{C}_2\text{H}_5\text{OH}, molar mass 46.07 g/mol46.07\text{ g/mol}) in a closed bottle at 20.0∘C20.0^\circ\text{C} is 112 mg/L112\text{ mg/L}. Calculate its vapor pressure in mmHg\text{mmHg}. (R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm/(mol}\cdot\text{K)}, 1 atm=760 mmHg1\text{ atm} = 760\text{ mmHg})

Answer

44.5 mmHg44.5\text{ mmHg}. Key steps: Convert 112 mg/L=0.112 g/L112\text{ mg/L} = 0.112\text{ g/L}; nV=0.11246.07=2.431×10−3 mol/L\frac{n}{V} = \frac{0.112}{46.07} = 2.431 \times 10^{-3}\text{ mol/L}; T=293.15 KT = 293.15\text{ K}; P=(2.431×10−3)(0.08206)(293.15)=0.05848 atmP = (2.431 \times 10^{-3})(0.08206)(293.15) = 0.05848\text{ atm}; P=0.05848×760=44.5 mmHgP = 0.05848 \times 760 = 44.5\text{ mmHg}.

02

Dimethyl ether (CH3OCH3\text{CH}_3\text{OCH}_3, 46.07 g/mol46.07\text{ g/mol}) and ethanol (CH3CH2OH\text{CH}_3\text{CH}_2\text{OH}, 46.07 g/mol46.07\text{ g/mol}) are constitutional isomers. At 20.0∘C20.0^\circ\text{C}, dimethyl ether has a vapor pressure of approximately 3970 mmHg3970\text{ mmHg}. (a) Calculate the vapor density of dimethyl ether in mg/L\text{mg/L}. (b) Explain the huge difference in vapor pressure between dimethyl ether (3970 mmHg3970\text{ mmHg}) and ethanol (44.5 mmHg44.5\text{ mmHg}).

Answer

(a) 1.00×104 mg/L1.00 \times 10^4\text{ mg/L} (10.0 g/L10.0\text{ g/L}). Key steps: P=3970760=5.224 atmP = \frac{3970}{760} = 5.224\text{ atm}; nV=5.224(0.08206)(293.15)=0.2172 mol/L\frac{n}{V} = \frac{5.224}{(0.08206)(293.15)} = 0.2172\text{ mol/L}; mass concentration=0.2172×46.07×1000=1.00×104 mg/L\text{mass concentration} = 0.2172 \times 46.07 \times 1000 = 1.00 \times 10^4\text{ mg/L}. (b) Ethanol forms strong intermolecular hydrogen bonds via its −OH-\text{OH} group, keeping it predominantly in the liquid phase. Dimethyl ether has an ether linkage without −OH-\text{OH} bonds, so it exhibits only weaker dipole-dipole attractions and London dispersion forces, allowing molecules to enter the gas phase with much greater ease.

03

A gas mixture contains 45.0 \mug/L45.0\text{ \mu g/L} of chloroform (CHCl3\text{CHCl}_3, 119.38 g/mol119.38\text{ g/mol}) at 25.0∘C25.0^\circ\text{C}. (a) Calculate its partial pressure in pascals (Pa\text{Pa}), using R=8.314 J/(mol⋅K)=8.314 Pa⋅m3/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} = 8.314\text{ Pa}\cdot\text{m}^3\text{/(mol}\cdot\text{K)}. (b) If dichloromethane (CH2Cl2\text{CH}_2\text{Cl}_2, 84.93 g/mol84.93\text{ g/mol}) is present at the same mass concentration, state with reasoning which compound exerts a higher partial pressure.

Answer

(a) 0.934 Pa0.934\text{ Pa}. Key steps: Convert 45.0 \mug/L=4.50×10−5 g/L=4.50×10−2 g/m345.0\text{ \mu g/L} = 4.50 \times 10^{-5}\text{ g/L} = 4.50 \times 10^{-2}\text{ g/m}^3; nV=4.50×10−2 g/m3119.38 g/mol=3.77×10−4 mol/m3\frac{n}{V} = \frac{4.50 \times 10^{-2}\text{ g/m}^3}{119.38\text{ g/mol}} = 3.77 \times 10^{-4}\text{ mol/m}^3; P=(nV)RT=(3.77×10−4)(8.314)(298.15)=0.934 PaP = \left(\frac{n}{V}\right)RT = (3.77 \times 10^{-4})(8.314)(298.15) = 0.934\text{ Pa}. (b) Dichloromethane exerts a higher partial pressure. Because pressure is proportional to molar concentration (n/Vn/V), at an identical mass concentration the compound with the smaller molar mass (84.93 g/mol84.93\text{ g/mol} vs 119.38 g/mol119.38\text{ g/mol}) has more moles per unit volume, producing a greater partial pressure.

Loading workspace…