Resources

An unknown volatile liquid hydrocarbon boils at 68.7∘C68.7^\circ\text{C} under an atmospheric pressure of 760.0 mmHg760.0\text{ mmHg}. A student cools a sample of this liquid in a closed vacuum apparatus and observes that its equilibrium vapor pressure drops to 121.5 mmHg121.5\text{ mmHg} at 20.0∘C20.0^\circ\text{C}. Reverse-engineer these laboratory observations using the two-point Clausius-Clapeyron equation to calculate the molar enthalpy of vaporization, ΔHvap\Delta H_{\text{vap}}, of this hydrocarbon in kJ/mol\text{kJ/mol}. Use R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}.

Answer and steps

Final answer

31.5 kJ/mol31.5\text{ kJ/mol}

Steps

01

Identify the Given Data and Convert Units

The relationship between the vapor pressure of a liquid and its temperature is described by the two-point Clausius-Clapeyron equation.

Extract the two states from the given data:

  • State 1 (cooled sample):

    • Temperature: T1=20.0∘C=20.0+273.15=293.15 KT_1 = 20.0^\circ\text{C} = 20.0 + 273.15 = 293.15\text{ K}
    • Vapor pressure: P1=121.5 mmHgP_1 = 121.5\text{ mmHg}
  • State 2 (normal boiling point):

    • Temperature: T2=68.7∘C=68.7+273.15=341.85 KT_2 = 68.7^\circ\text{C} = 68.7 + 273.15 = 341.85\text{ K}
    • Vapor pressure: P2=760.0 mmHgP_2 = 760.0\text{ mmHg} (at the normal boiling point, vapor pressure equals atmospheric pressure)
  • Universal gas constant:

    • R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}

Pitfall to avoid: Temperatures in thermodynamic equations must always be expressed in absolute units (Kelvin), never in degrees Celsius. However, because pressures appear as a ratio (P2/P1P_2 / P_1), any pressure unit can be used directly as long as both P1P_1 and P2P_2 share the same unit.


02

State the Two-Point Clausius-Clapeyron Equation

The Clausius-Clapeyron equation relates the vapor pressures P1P_1 and P2P_2 at absolute temperatures T1T_1 and T2T_2 to the molar enthalpy of vaporization, ΔHvap\Delta H_{\text{vap}}:

ln⁡(P2P1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)

Rearranging to solve for ΔHvap\Delta H_{\text{vap}}:

ΔHvap=R⋅ln⁡(P2P1)1T1−1T2\Delta H_{\text{vap}} = \frac{R \cdot \ln\left(\frac{P_2}{P_1}\right)}{\frac{1}{T_1} - \frac{1}{T_2}}


03

Evaluate the Terms

  1. Pressure ratio and logarithm: P2P1=760.0 mmHg121.5 mmHg≈6.2551\frac{P_2}{P_1} = \frac{760.0\text{ mmHg}}{121.5\text{ mmHg}} \approx 6.2551 ln⁡(6.2551)≈1.8334\ln(6.2551) \approx 1.8334
  2. Inverse temperature difference: 1T1=1293.15 K≈3.4112×10−3 K−1\frac{1}{T_1} = \frac{1}{293.15\text{ K}} \approx 3.4112 \times 10^{-3}\text{ K}^{-1} 1T2=1341.85 K≈2.9253×10−3 K−1\frac{1}{T_2} = \frac{1}{341.85\text{ K}} \approx 2.9253 \times 10^{-3}\text{ K}^{-1} 1T1−1T2≈(3.4112−2.9253)×10−3=4.859×10−4 K−1\frac{1}{T_1} - \frac{1}{T_2} \approx (3.4112 - 2.9253) \times 10^{-3} = 4.859 \times 10^{-4}\text{ K}^{-1}

04

Calculate ΔHvap\Delta H_{\text{vap}}

Substitute these values into the rearranged equation:

ΔHvap=8.314 J/(mol⋅K)⋅1.83344.859×10−4 K−1≈31370 J/mol\Delta H_{\text{vap}} = \frac{8.314\text{ J/(mol}\cdot\text{K)} \cdot 1.8334}{4.859 \times 10^{-4}\text{ K}^{-1}} \approx 31370\text{ J/mol}

Convert from J/mol\text{J/mol} to kJ/mol\text{kJ/mol}:

ΔHvap=31370 J/mol1000 J/kJ≈31.4 to 31.5 kJ/mol\Delta H_{\text{vap}} = \frac{31370\text{ J/mol}}{1000\text{ J/kJ}} \approx 31.4\text{ to } 31.5\text{ kJ/mol}

Rounding to three significant figures gives:

ΔHvap=31.5 kJ/mol\Delta H_{\text{vap}} = 31.5\text{ kJ/mol}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses temperatures in Celsius directly in the Clausius-Clapeyron equation instead of converting them to Kelvin, resulting in an incorrect enthalpy value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ln⁡(P2P1)=−(ΔHvapR)⋅(1T2−1T1)\ln\left(\frac{P_2}{P_1}\right) = -\left(\frac{\Delta H_{\text{vap}}}{R}\right) \cdot \left(\frac{1}{T_2} - \frac{1}{T_1}\right)

  2. Step 2

    ln⁡(760.0121.5)=−(ΔHvap8.314)⋅(168.7−120.0)\ln\left(\frac{760.0}{121.5}\right) = -\left(\frac{\Delta H_{\text{vap}}}{8.314}\right) \cdot \left(\frac{1}{68.7} - \frac{1}{20.0}\right)

    Correct

    ln⁡(760.0121.5)=−(ΔHvap8.314)⋅(1341.85−1293.15)\ln\left(\frac{760.0}{121.5}\right) = -\left(\frac{\Delta H_{\text{vap}}}{8.314}\right) \cdot \left(\frac{1}{341.85} - \frac{1}{293.15}\right)

    You substituted the temperatures directly in degrees Celsius (68.7∘C68.7^\circ\text{C} and 20.0∘C20.0^\circ\text{C}) rather than converting them to Kelvin (T2=68.7+273.15=341.85 KT_2 = 68.7 + 273.15 = 341.85\text{ K} and T1=20.0+273.15=293.15 KT_1 = 20.0 + 273.15 = 293.15\text{ K}).

  3. Step 3

    1.833=−(ΔHvap8.314)⋅(0.01456−0.05000)  ⟹  1.833=ΔHvap⋅0.004263  ⟹  ΔHvap=430 J/mol=0.43 kJ/mol1.833 = -\left(\frac{\Delta H_{\text{vap}}}{8.314}\right) \cdot (0.01456 - 0.05000) \implies 1.833 = \Delta H_{\text{vap}} \cdot 0.004263 \implies \Delta H_{\text{vap}} = 430\text{ J/mol} = 0.43\text{ kJ/mol}

    Correct

    1.8334=ΔHvap⋅5.844×10−5  ⟹  ΔHvap≈31370 J/mol=31.5 kJ/mol1.8334 = \Delta H_{\text{vap}} \cdot 5.844 \times 10^{-5} \implies \Delta H_{\text{vap}} \approx 31370\text{ J/mol} = 31.5\text{ kJ/mol}

    Your algebraic manipulation and unit conversion from J/mol\text{J/mol} to kJ/mol\text{kJ/mol} were executed cleanly, but the resulting numerical value was skewed by the unconverted Celsius values.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct two-point Clausius-Clapeyron formula.

You paired the vapor pressures correctly with their corresponding temperatures.

You used the correct gas constant R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} and handled the negative sign consistently.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature Unit Conversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated temperature as an interval or relative scale rather than converting to absolute thermodynamic temperature in Kelvin (T [K]=T [∘C]+273.15T\text{ [K]} = T\text{ [}^\circ\text{C]} + 273.15). In nonlinear functions like 1T\frac{1}{T}, inverse Celsius does not equal inverse Kelvin.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Temperature Rule
  • Any thermodynamic relationship containing reciprocal temperature (1/T1/T) requires temperature on the absolute Kelvin scale (T=∘C+273.15T = ^\circ\text{C} + 273.15).

  • Always convert temperatures to Kelvin as your very first step before substituting into formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert temperatures to Kelvin: T1=20.0+273.15=293.15 KT_1 = 20.0 + 273.15 = 293.15\text{ K} and T2=68.7+273.15=341.85 KT_2 = 68.7 + 273.15 = 341.85\text{ K}.

  2. Compute the reciprocal temperature difference: 1T1−1T2=1293.15−1341.85≈3.4112×10−3−2.9253×10−3=4.859×10−4 K−1\frac{1}{T_1} - \frac{1}{T_2} = \frac{1}{293.15} - \frac{1}{341.85} \approx 3.4112 \times 10^{-3} - 2.9253 \times 10^{-3} = 4.859 \times 10^{-4}\text{ K}^{-1}.

  3. Evaluate the logarithmic pressure ratio: ln⁡(760.0121.5)=ln⁡(6.2551)≈1.8334\ln\left(\frac{760.0}{121.5}\right) = \ln(6.2551) \approx 1.8334.

  4. Solve for ΔHvap\Delta H_{\text{vap}}: ΔHvap=8.314×1.83344.859×10−4≈31370 J/mol=31.5 kJ/mol\Delta H_{\text{vap}} = \frac{8.314 \times 1.8334}{4.859 \times 10^{-4}} \approx 31370\text{ J/mol} = 31.5\text{ kJ/mol}.

Final answer

31.5 kJ/mol31.5\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Highlight given temperature units in any thermodynamic problem immediately to remind yourself to convert to Kelvin.

  • Check that your calculated molar enthalpy of vaporization falls into a realistic range for volatile liquids (typically 20 to 50 kJ/mol20\text{ to }50\text{ kJ/mol}).

OverviewACEpath Teacher's Diagnosis

02 The student calculates the enthalpy of vaporization in J/mol but forgets to divide by 1000 to convert to kJ/mol as requested by the problem.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T1=20.0+273.15=293.15 K  ⟹  T2=68.7+273.15=341.85 KT_1 = 20.0 + 273.15 = 293.15\text{ K} \implies T_2 = 68.7 + 273.15 = 341.85\text{ K}

  2. Step 2

    ln⁡(760.0121.5)=−(ΔHvap/8.314)∗(1341.85−1293.15)  ⟹  1.8334=−(ΔHvap/8.314)∗(−0.0004859)\ln\left(\frac{760.0}{121.5}\right) = -(\Delta H_{\text{vap}}/8.314) * \left(\frac{1}{341.85} - \frac{1}{293.15}\right) \implies 1.8334 = -(\Delta H_{\text{vap}}/8.314) * (-0.0004859)

  3. Step 3

    ΔHvap=31368 kJ/mol\Delta H_{\text{vap}} = 31368\text{ kJ/mol}

    Correct

    ΔHvap=31368 J/mol1000 J/kJ≈31.4 to 31.5 kJ/mol\Delta H_{\text{vap}} = \frac{31368\text{ J/mol}}{1000\text{ J/kJ}} \approx 31.4\text{ to } 31.5\text{ kJ/mol}

    Using R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} outputs the enthalpy in J/mol\text{J/mol}, not kJ/mol\text{kJ/mol}. You need to divide by 1000 J/kJ1000\text{ J/kJ} and round to appropriate significant figures.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted both given temperatures from degrees Celsius into Kelvin.

You accurately substituted the pressures and temperatures into the two-point Clausius-Clapeyron equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing unit conversion (J to kJ)

You solved for the value using RR in J/(mol⋅K)\text{J/(mol}\cdot\text{K)} and wrote kJ/mol\text{kJ/mol} on the line without dividing by 10001000.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The gas constant R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} carries the base energy unit of joules (J\text{J}). Solving for ΔHvap\Delta H_{\text{vap}} directly produces J/mol\text{J/mol}, which must be divided by 10001000 to satisfy a prompt requesting kJ/mol\text{kJ/mol}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match units of R with the final enthalpy unit
  • When using R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}, ΔHvap\Delta H_{\text{vap}} is obtained in J/mol\text{J/mol}. To convert to kJ/mol\text{kJ/mol}, divide by 10001000.

  • Always write down the units alongside RR during algebraic isolation: ΔHvap=value J/mol1000 J/kJ\Delta H_{\text{vap}} = \frac{\text{value J/mol}}{1000\text{ J/kJ}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide by 1000 J/kJ1000\text{ J/kJ} to convert the molar enthalpy from joules to kilojoules: ΔHvap=31368 J/mol1000 J/kJ=31.368 kJ/mol\Delta H_{\text{vap}} = \frac{31368\text{ J/mol}}{1000\text{ J/kJ}} = 31.368\text{ kJ/mol}.

  2. Round the final result to three significant figures based on the measured data: 31.4 kJ/mol31.4\text{ kJ/mol} (or 31.5 kJ/mol31.5\text{ kJ/mol} using intermediate values).

Final answer

31.5 kJ/mol31.5\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Track the unit of energy explicitly by writing out J/(mol⋅K)\text{J/(mol}\cdot\text{K)} whenever you plug in R=8.314R = 8.314.

  • Before boxing your final answer, double-check whether the question requested J/mol\text{J/mol} or kJ/mol\text{kJ/mol}.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the temperature difference or misapplies the negative sign in the Clausius-Clapeyron equation, yielding a negative enthalpy of vaporization.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T1=293.15 K,  T2=341.85 KT_1 = 293.15\text{ K},\; T_2 = 341.85\text{ K}

  2. Step 2

    ln⁡(P2P1)=(ΔHvapR)⋅(1T2−1T1)\ln\left(\frac{P_2}{P_1}\right) = \left(\frac{\Delta H_{\text{vap}}}{R}\right) \cdot \left(\frac{1}{T_2} - \frac{1}{T_1}\right)

    Correct

    ln⁡(P2P1)=−ΔHvapR(1T2−1T1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)

    When writing the Clausius-Clapeyron equation without a leading negative sign, the temperature difference must be (1T1−1T2)\left(\frac{1}{T_1} - \frac{1}{T_2}\right). If you write (1T2−1T1)\left(\frac{1}{T_2} - \frac{1}{T_1}\right), a negative sign −ΔHvapR-\frac{\Delta H_{\text{vap}}}{R} is required.

  3. Step 3

    ln⁡(760.0121.5)=(ΔHvap8.314)⋅(1341.85−1293.15)  ⟹  1.8334=(ΔHvap8.314)⋅(−0.0004859)\ln\left(\frac{760.0}{121.5}\right) = \left(\frac{\Delta H_{\text{vap}}}{8.314}\right) \cdot \left(\frac{1}{341.85} - \frac{1}{293.15}\right) \implies 1.8334 = \left(\frac{\Delta H_{\text{vap}}}{8.314}\right) \cdot (-0.0004859)

    Correct

    ln⁡(760.0121.5)=(ΔHvap8.314)⋅(1293.15−1341.85)  ⟹  1.8334=(ΔHvap8.314)⋅(0.0004859)\ln\left(\frac{760.0}{121.5}\right) = \left(\frac{\Delta H_{\text{vap}}}{8.314}\right) \cdot \left(\frac{1}{293.15} - \frac{1}{341.85}\right) \implies 1.8334 = \left(\frac{\Delta H_{\text{vap}}}{8.314}\right) \cdot (0.0004859)

    Your substitution and calculation of individual numerical values were mathematically sound, but they inherited the inverted sign from Step 2.

  4. Step 4

    ΔHvap=−31368 J/mol=−31.4 kJ/mol\Delta H_{\text{vap}} = -31368\text{ J/mol} = -31.4\text{ kJ/mol}

    Correct

    ΔHvap=+31.5 kJ/mol\Delta H_{\text{vap}} = +31.5\text{ kJ/mol}

    Because of the sign error in the equation, your calculated molar enthalpy came out negative. Vaporization is an endothermic phase change, so ΔHvap\Delta H_{\text{vap}} must always be positive.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the experimental temperatures to the Kelvin scale.

You correctly matched the pairs of vapor pressure and temperature.

You evaluated the natural logarithm and inverse temperature values with high numerical precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Clausius-Clapeyron Sign / Temperature Order Inversion

You wrote (1T2−1T1)\left(\frac{1}{T_2} - \frac{1}{T_1}\right) without the required negative sign in front of ΔHvapR\frac{\Delta H_{\text{vap}}}{R}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the two standard forms of the integrated Clausius-Clapeyron equation: ln⁡(P2/P1)=−(ΔHvap/R)(1/T2−1/T1)\ln(P_2/P_1) = -(\Delta H_{\text{vap}}/R)(1/T_2 - 1/T_1) and ln⁡(P2/P1)=(ΔHvap/R)(1/T1−1/T2)\ln(P_2/P_1) = (\Delta H_{\text{vap}}/R)(1/T_1 - 1/T_2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Reality Check
  • Phase changes from liquid to gas require energy input (endothermic), which guarantees ΔHvap>0\Delta H_{\text{vap}} > 0.

  • Whenever vapor pressure increases as temperature increases (T2>T1  ⟹  P2>P1T_2 > T_1 \implies P_2 > P_1), check that both sides of your Clausius-Clapeyron equation are strictly positive.

Sign Pairing in Clausius-Clapeyron
  • ln⁡(P2P1)=−ΔHvapR(1T2−1T1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = -\frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right).

  • Double-check that a leading positive sign is matched with (1T1−1T2)\left(\frac{1}{T_1} - \frac{1}{T_2}\right) so that higher temperature yields a positive quantity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the correct integrated form: ln⁡(P2P1)=ΔHvapR(1T1−1T2)\ln\left(\frac{P_2}{P_1}\right) = \frac{\Delta H_{\text{vap}}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)

  2. Substitute values: 1.8334=ΔHvap8.314(1293.15−1341.85)=ΔHvap8.314(0.0004859)1.8334 = \frac{\Delta H_{\text{vap}}}{8.314}\left(\frac{1}{293.15} - \frac{1}{341.85}\right) = \frac{\Delta H_{\text{vap}}}{8.314}(0.0004859)

  3. Solve for ΔHvap\Delta H_{\text{vap}}: ΔHvap=1.8334×8.3140.0004859≈31370 J/mol=31.5 kJ/mol\Delta H_{\text{vap}} = \frac{1.8334 \times 8.314}{0.0004859} \approx 31370\text{ J/mol} = 31.5\text{ kJ/mol}

Final answer

31.5 kJ/mol31.5\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a physical sanity check on ΔHvap\Delta H_{\text{vap}}: breaking intermolecular attractions always requires heat, so ΔHvap\Delta H_{\text{vap}} cannot be negative.

  • Commit to one preferred form of the Clausius-Clapeyron equation: ln⁡(P2/P1)=−ΔHvapR(1/T2−1/T1)\ln(P_2/P_1) = -\frac{\Delta H_{\text{vap}}}{R}(1/T_2 - 1/T_1) or ln⁡(P2/P1)=ΔHvapR(1/T1−1/T2)\ln(P_2/P_1) = \frac{\Delta H_{\text{vap}}}{R}(1/T_1 - 1/T_2), noting how the sign correlates with the index order.

Lock it in

Similar question

01

A liquid has a vapor pressure of 40.0 mmHg40.0\text{ mmHg} at 10.0∘C10.0^\circ\text{C} and 160.0 mmHg160.0\text{ mmHg} at 40.0∘C40.0^\circ\text{C}. Calculate its molar enthalpy of vaporization, ΔHvap\Delta H_{\text{vap}}, in kJ/mol\text{kJ/mol}. (R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)})

Answer

T1=10.0+273.15=283.15 KT_1 = 10.0 + 273.15 = 283.15\text{ K}, T2=40.0+273.15=313.15 KT_2 = 40.0 + 273.15 = 313.15\text{ K}. ln⁡(160.0/40.0)=ln⁡(4)≈1.3863\ln(160.0/40.0) = \ln(4) \approx 1.3863. 1T1−1T2=1283.15−1313.15≈3.385×10−4 K−1\frac{1}{T_1} - \frac{1}{T_2} = \frac{1}{283.15} - \frac{1}{313.15} \approx 3.385 \times 10^{-4}\text{ K}^{-1}. ΔHvap=8.314×1.38633.385×10−4≈34.0 kJ/mol\Delta H_{\text{vap}} = \frac{8.314 \times 1.3863}{3.385 \times 10^{-4}} \approx 34.0\text{ kJ/mol}.

02

Ethanol has a normal boiling point of 78.3∘C78.3^\circ\text{C} (P=1.00 atmP = 1.00\text{ atm}) and a molar heat of vaporization of 38.6 kJ/mol38.6\text{ kJ/mol}. What is its vapor pressure in atm\text{atm} at 25.0∘C25.0^\circ\text{C}? (R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)})

Answer

T1=298.15 KT_1 = 298.15\text{ K}, T2=78.3+273.15=351.45 KT_2 = 78.3 + 273.15 = 351.45\text{ K}. ΔHvap=38600 J/mol\Delta H_{\text{vap}} = 38600\text{ J/mol}. ln⁡(1.00P1)=386008.314(1298.15−1351.45)=4642.8×(5.084×10−4)≈2.360\ln\left(\frac{1.00}{P_1}\right) = \frac{38600}{8.314}\left(\frac{1}{298.15} - \frac{1}{351.45}\right) = 4642.8 \times (5.084 \times 10^{-4}) \approx 2.360. P1=1.00e2.360≈0.0944 atmP_1 = \frac{1.00}{e^{2.360}} \approx 0.0944\text{ atm} (or ≈71.7 mmHg\approx 71.7\text{ mmHg}).

03

An unknown liquid has vapor pressures of 100.0 torr100.0\text{ torr} at 300.0 K300.0\text{ K} and 400.0 torr400.0\text{ torr} at 340.0 K340.0\text{ K}. Determine its normal boiling point (in ∘C^\circ\text{C}), where vapor pressure is 760.0 torr760.0\text{ torr}. (R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)})

Answer

First find ΔHvap\Delta H_{\text{vap}}: ln⁡(400/100)=1.3863=ΔHvap8.314(1300.0−1340.0)  ⟹  ΔHvap≈29330 J/mol\ln(400/100) = 1.3863 = \frac{\Delta H_{\text{vap}}}{8.314}\left(\frac{1}{300.0} - \frac{1}{340.0}\right) \implies \Delta H_{\text{vap}} \approx 29330\text{ J/mol}. Next find TbpT_{\text{bp}} using (P1=100 torr,T1=300 K)(P_1=100\text{ torr}, T_1=300\text{ K}) and P2=760 torrP_2=760\text{ torr}: ln⁡(760/100)=2.0281=293308.314(1300.0−1Tbp)  ⟹  1300.0−1Tbp=5.749×10−4  ⟹  1Tbp=2.758×10−3 K−1  ⟹  Tbp≈362.5 K=89.4∘C\ln(760/100) = 2.0281 = \frac{29330}{8.314}\left(\frac{1}{300.0} - \frac{1}{T_{\text{bp}}}\right) \implies \frac{1}{300.0} - \frac{1}{T_{\text{bp}}} = 5.749 \times 10^{-4} \implies \frac{1}{T_{\text{bp}}} = 2.758 \times 10^{-3}\text{ K}^{-1} \implies T_{\text{bp}} \approx 362.5\text{ K} = 89.4^\circ\text{C}.

Loading workspace…