Resources

A student analyzes the temperature dependence of rate constant data using the linear Arrhenius form ln⁡k=−EaR(1T)+ln⁡A\ln k = -\frac{E_a}{R}\left(\frac{1}{T}\right) + \ln A. Plotting ln⁡k\ln k on the vertical axis versus 1T\frac{1}{T} (in K−1\text{K}^{-1}) on the horizontal axis yields a best-fit straight line with a slope of m=−1.25×104 Km = -1.25 \times 10^4\text{ K}. (a) Calculate the experimental activation energy EaE_a in kJ/mol\text{kJ/mol}, taking care of signs and units (R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})). (b) The student mistakenly concludes that because the slope mm is negative, the reaction rate decreases with increasing temperature, and computes Ea=−104 kJ/molE_a = -104\text{ kJ/mol}. Identify the fundamental coordinate trap in this reasoning and explain why collision theory dictates that physical activation energies for elementary steps are positive.

Answer and steps

Final answer

(a) Ea=−mR=−(−1.25×104 K)×8.314 J/(mol⋅K)=1.04×105 J/mol=104 kJ/molE_a = -m R = -(-1.25 \times 10^4\text{ K}) \times 8.314\text{ J}/(\text{mol}\cdot\text{K}) = 1.04 \times 10^5\text{ J/mol} = 104\text{ kJ/mol}; (b) The student forgot that the horizontal axis is the reciprocal temperature 1T\frac{1}{T}, which decreases as temperature TT increases. A negative slope Δln⁡kΔ(1/T)<0\frac{\Delta \ln k}{\Delta (1/T)} < 0 means ln⁡k\ln k increases as 1T\frac{1}{T} decreases (i.e., as TT increases). In collision theory, colliding particles must overcome an electrostatic/repulsive energy barrier to reach the transition state, requiring a positive kinetic energy threshold (Ea>0E_a > 0).

Steps

Part (a): Calculating the Activation Energy (EaE_a)

  1. Relate the Arrhenius Equation to a Straight Line: The linear form of the Arrhenius equation is given by: ln⁡k=−EaR(1T)+ln⁡A\ln k = -\frac{E_a}{R}\left(\frac{1}{T}\right) + \ln A Comparing this to the slope-intercept equation of a line, y=mx+by = mx + b:

    • Vertical axis (yy): ln⁡k\ln k
    • Horizontal axis (xx): 1T\frac{1}{T}
    • Slope (mm): −EaR-\frac{E_a}{R}
    • Vertical intercept (bb): ln⁡A\ln A
  2. Solve for EaE_a: m=−EaR  ⟹  Ea=−mRm = -\frac{E_a}{R} \implies E_a = -m R
  3. Substitute the Given Values:

    • m=−1.25×104 Km = -1.25 \times 10^4\text{ K}
    • R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})

    Ea=−(−1.25×104 K)⋅8.314 J/(mol⋅K)E_a = -(-1.25 \times 10^4\text{ K}) \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K}) Ea=1.03925×105 J/mol≈1.04×105 J/molE_a = 1.03925 \times 10^5\text{ J/mol} \approx 1.04 \times 10^5\text{ J/mol}

  4. Convert to kJ/mol\text{kJ/mol}: Ea=1.04×105 J/mol1000 J/kJ=104 kJ/molE_a = \frac{1.04 \times 10^5\text{ J/mol}}{1000\text{ J/kJ}} = 104\text{ kJ/mol}

Part (b): Identifying the Coordinate Trap and Collision Theory Explanation

  1. The Coordinate Trap (Reciprocal Temperature Axis):

    • The horizontal axis plots the reciprocal temperature, 1T\frac{1}{T}, not temperature TT directly.
    • As absolute temperature TT increases, its reciprocal 1T\frac{1}{T} decreases (moving to the left on the horizontal axis).
    • Because the slope is negative, moving to the left (decreasing 1T\frac{1}{T}, which means increasing TT) results in moving upward (increasing ln⁡k\ln k). Therefore, the rate constant kk and the reaction rate increase as temperature increases.
    • Forgetting the negative sign in m=−EaRm = -\frac{E_a}{R} leads to an erroneous negative activation energy.
  2. Collision Theory and Physical Activation Energy:

    • According to collision theory, for a reaction to occur, reactant molecules must collide with both proper orientation and sufficient kinetic energy.
    • As reacting molecules approach one another, their electron clouds repel, and existing bonds must distort or stretch before new bonds can form.
    • To overcome this potential energy barrier and reach the high-energy activated complex (transition state), colliding particles must possess a minimum threshold of kinetic energy.
    • Because this barrier is an energy requirement above the initial ground-state energy of the reactants, the activation energy for an elementary step is inherently positive (Ea>0E_a > 0).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the negative sign in the slope relation m = -E_a / R, resulting in a negative activation energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=EaR  ⟹  Ea=m×Rm = \frac{E_a}{R} \implies E_a = m \times R

    Correct

    m=−EaR  ⟹  Ea=−mRm = -\frac{E_a}{R} \implies E_a = -m R

    You omitted the negative sign in the slope relationship. Matching ln⁡k=−EaR(1T)+ln⁡A\ln k = -\frac{E_a}{R}\left(\frac{1}{T}\right) + \ln A to y=mx+by = mx + b gives m=−EaRm = -\frac{E_a}{R}.

  2. Step 2

    Ea=−1.25×104 K×8.314 J/(mol⋅K)  ⟹  Ea=−103925 J/mol=−104 kJ/molE_a = -1.25 \times 10^4\text{ K} \times 8.314\text{ J}/(\text{mol}\cdot\text{K}) \implies E_a = -103925\text{ J/mol} = -104\text{ kJ/mol}

    Correct

    Ea=−(−1.25×104 K)×8.314 J/(mol⋅K)=1.04×105 J/mol=104 kJ/molE_a = -(-1.25 \times 10^4\text{ K}) \times 8.314\text{ J}/(\text{mol}\cdot\text{K}) = 1.04 \times 10^5\text{ J/mol} = 104\text{ kJ/mol}

    Your arithmetic and unit conversion from J/mol\text{J/mol} to kJ/mol\text{kJ/mol} were executed correctly, but the resulting negative sign was propagated from the missing negative sign in Step 1.

  3. Step 3

    The horizontal axis is 1T\frac{1}{T} rather than TT, so increasing TT causes 1T\frac{1}{T} to decrease, meaning ln⁡k\ln k actually increases with temperature.

  4. Step 4

    According to collision theory, colliding particles must overcome a positive minimum kinetic energy barrier to react.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the horizontal axis represents 1/T1/T, meaning an increase in TT corresponds to moving leftward toward higher ln⁡k\ln k.

You accurately applied collision theory to explain why an energy barrier must be positive for reacting particles.

You executed the multiplication and conversion from J/mol\text{J/mol} to kJ/mol\text{kJ/mol} with correct significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dropped Negative Sign in Arrhenius Slope

You wrote the slope as m=EaRm = \frac{E_a}{R} instead of m=−EaRm = -\frac{E_a}{R}, resulting in an unphysical negative activation energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to account for the explicit negative sign preceding EaR\frac{E_a}{R} in the linear Arrhenius equation ln⁡k=−EaR(1T)+ln⁡A\ln k = -\frac{E_a}{R}\left(\frac{1}{T}\right) + \ln A.

REASONING PATH
Your ACEpath teacher’s suggested approach
Linear Arrhenius Slope Formula
  • When plotting ln⁡k\ln k versus 1/T1/T, the slope is m=−EaRm = -\frac{E_a}{R}, meaning Ea=−mRE_a = -m R.

  • Always write out m=−EaRm = -\frac{E_a}{R} before isolating EaE_a, and verify that a negative slope produces a positive activation energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the Arrhenius equation in linear form: ln⁡k=−EaR(1T)+ln⁡A\ln k = -\frac{E_a}{R}\left(\frac{1}{T}\right) + \ln A, which matches y=mx+by = mx + b.

  2. Identify the slope: m=−EaR  ⟹  Ea=−mRm = -\frac{E_a}{R} \implies E_a = -m R.

  3. Substitute m=−1.25×104 Km = -1.25 \times 10^4\text{ K} and R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}): Ea=−(−1.25×104 K)×8.314 J/(mol⋅K)=1.039×105 J/molE_a = -(-1.25 \times 10^4\text{ K}) \times 8.314\text{ J}/(\text{mol}\cdot\text{K}) = 1.039 \times 10^5\text{ J/mol}.

  4. Convert to kJ/mol\text{kJ/mol}: Ea=1.039×105 J/mol1000 J/kJ=104 kJ/molE_a = \frac{1.039 \times 10^5\text{ J/mol}}{1000\text{ J/kJ}} = 104\text{ kJ/mol}.

Final answer

(a) Ea=104 kJ/molE_a = 104\text{ kJ/mol}; (b) The horizontal axis plots 1/T1/T, so increasing TT moves to the left, which corresponds to increasing ln⁡k\ln k. Collision theory requires Ea>0E_a > 0 because colliding molecules must overcome repulsive forces to form the transition state.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out m=−Ea/Rm = -E_a / R explicitly every time you extract kinetic parameters from an Arrhenius plot.

  • Check that your final activation energy for an elementary step is a positive quantity (Ea>0E_a > 0) as a physical sanity check.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert the activation energy from J/mol to kJ/mol, reporting the final value in joules per mole.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=−EaR  ⟹  Ea=−m×R=−(−1.25×104 K)×8.314 J/(mol⋅K)m = \frac{-E_a}{R} \implies E_a = -m \times R = -(-1.25 \times 10^4\text{ K}) \times 8.314\text{ J}/(\text{mol}\cdot\text{K})

  2. Step 2

    Ea=1.04×105 kJ/molE_a = 1.04 \times 10^5\text{ kJ/mol}

    Correct

    Ea=1.04×105 J/mol1000 J/kJ=104 kJ/molE_a = \frac{1.04 \times 10^5\text{ J/mol}}{1000\text{ J/kJ}} = 104\text{ kJ/mol}

    The product −mR-m R yields units of J/mol\text{J/mol} because RR was in J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K}). To express the final answer in kJ/mol\text{kJ/mol}, you must divide by 1000 J/kJ1000\text{ J/kJ}, which gives 104 kJ/mol104\text{ kJ/mol} instead of 1.04×105 kJ/mol1.04 \times 10^5\text{ kJ/mol}.

  3. Step 3

    The horizontal axis plots 1/T1/T, so as temperature TT increases, 1/T1/T decreases, leading to an increase in ln⁡k\ln k and rate.

  4. Step 4

    In collision theory, molecules must possess a positive threshold kinetic energy to successfully react upon collision.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly rearranged the Arrhenius slope relation to Ea=−mRE_a = -m R.

You handled the double negative cleanly to obtain a positive activation energy.

You clearly explained the reciprocal temperature coordinate trap and its impact on reaction rate.

You accurately grounded the positive activation energy in collision theory.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission

You retained the magnitude 1.04×1051.04 \times 10^5 from the J/mol\text{J/mol} calculation while writing kJ/mol\text{kJ/mol} as the unit label.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the unit of the ideal gas constant RR (8.314 J/(mol⋅K)8.314\text{ J}/(\text{mol}\cdot\text{K})), which inherently produces energy in joules (J\text{J}) rather than kilojoules (kJ\text{kJ}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Track the Base Energy Unit in Gas Constant Calculations
  • Using R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) yields activation energy in J/mol\text{J/mol}.

  • Always append explicit units to every intermediate result before changing unit prefixes, and divide by 10310^3 to convert J/mol\text{J/mol} to kJ/mol\text{kJ/mol}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Ea=1.03925×105 J/molE_a = 1.03925 \times 10^5\text{ J/mol}

  2. Ea=1.03925×105 J/mol1000 J/kJ=103.925 kJ/mol≈104 kJ/molE_a = \frac{1.03925 \times 10^5\text{ J/mol}}{1000\text{ J/kJ}} = 103.925\text{ kJ/mol} \approx 104\text{ kJ/mol}

Final answer

104 kJ/mol104\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out intermediate units explicitly: 1.04×105 J/mol1.04 \times 10^5\text{ J/mol} before converting to kJ/mol\text{kJ/mol}.

  • Perform a sanity check on magnitude: typical chemical activation energies range between 2020 and 250 kJ/mol250\text{ kJ/mol}, so a value on the order of 105 kJ/mol10^5\text{ kJ/mol} indicates an unscaled joules-to-kilojoules conversion.

OverviewACEpath Teacher's Diagnosis

03 The student confuses 1/T with T, mistakenly assuming that the negative slope directly implies reaction rate decreases as temperature increases.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=−EaR  ⟹  Ea=−m×R=−(−1.25×104 K)×8.314 J/(mol⋅K)=103925 J/mol  ⟹  Ea=104 kJ/molm = -\frac{E_a}{R} \implies E_a = -m \times R = -(-1.25 \times 10^4\text{ K}) \times 8.314\text{ J}/(\text{mol}\cdot\text{K}) = 103925\text{ J/mol} \implies E_a = 104\text{ kJ/mol}

  2. Step 2

    The negative slope means ln⁡k\ln k is inversely proportional to temperature, so increasing TT lowers ln⁡k\ln k and slows down the reaction.

    Correct

    The horizontal axis represents reciprocal temperature 1T\frac{1}{T}, not TT. As temperature TT increases, 1T\frac{1}{T} decreases (moving left on the axis). Because the slope is negative, moving to the left results in a higher ln⁡k\ln k, so the reaction rate actually increases with increasing temperature.

    You treated the horizontal axis as if it plotted temperature TT directly. In an Arrhenius plot, the axis is 1T\frac{1}{T}. As TT increases, 1T\frac{1}{T} decreases, which moves to the left on the graph toward larger values of ln⁡k\ln k.

  3. Step 3

    Collision theory requires activation energy to be positive because collisions must exceed an energy barrier to react.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the slope of the linear Arrhenius plot to activation energy using m=−EaRm = -\frac{E_a}{R}.

You accurately executed the numerical calculation and unit conversion to find Ea=104 kJ/molE_a = 104\text{ kJ/mol}.

You stated the core requirement of collision theory regarding the minimum energy threshold needed for a successful reaction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal axis inversion trap

You equated a negative slope on a ln⁡k\ln k vs. 1T\frac{1}{T} plot with a decrease in rate as temperature increases.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the variable plotted on the horizontal axis (1T\frac{1}{T}) with absolute temperature (TT), obscuring the fact that increasing TT moves to the left on the graph.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inspect the horizontal axis quantity
  • In Arrhenius plots, the abscissa is 1T\frac{1}{T}, which is inversely related to temperature.

  • Always check which direction corresponds to 'higher temperature' by noting that as T↑T \uparrow, 1T↓\frac{1}{T} \downarrow (leftward motion).

Interpret negative slope with reciprocal coordinates
  • Slope m=Δln⁡kΔ(1/T)<0m = \frac{\Delta \ln k}{\Delta (1/T)} < 0 implies Δln⁡k\Delta \ln k and Δ(1/T)\Delta (1/T) have opposite signs.

  • When TT increases, Δ(1/T)<0\Delta (1/T) < 0, so Δln⁡k>0\Delta \ln k > 0, meaning rate constant kk increases.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the horizontal axis as x=1Tx = \frac{1}{T}.

  2. Evaluate the effect of increasing TT: as TT increases, x=1Tx = \frac{1}{T} decreases.

  3. Use the definition of slope: Δy=m⋅Δx\Delta y = m \cdot \Delta x. Since m<0m < 0 and Δx<0\Delta x < 0, the product Δy=Δln⁡k>0\Delta y = \Delta \ln k > 0.

  4. Conclude that ln⁡k\ln k and the reaction rate increase as temperature increases.

Final answer

The coordinate trap is that the horizontal axis is 1T\frac{1}{T}, which decreases as TT increases. A negative slope means ln⁡k\ln k increases as 1T\frac{1}{T} decreases, so reaction rate increases with increasing temperature.

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw arrow indicators directly on Arrhenius plot axes showing TT increasing toward the left.

  • Practice interpreting plots that use reciprocal variables (such as Lineweaver-Burk and van 't Hoff plots) to avoid coordinate inversion traps.

Lock it in

Similar question

01

An experimental study of a gas-phase decomposition yields an Arrhenius plot of ln⁡k\ln k versus 1/T1/T with a linear slope of m=−8.65×103 Km = -8.65 \times 10^3\text{ K}. Calculate the activation energy EaE_a of this reaction in kJ/mol\text{kJ/mol}. Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}).

Answer

Ea=71.9 kJ/molE_a = 71.9\text{ kJ/mol}. Using the slope relation m=−EaRm = -\frac{E_a}{R}: Ea=−mR=−(−8.65×103 K)(8.314 J/(mol⋅K))=7.192×104 J/mol=71.9 kJ/molE_a = -mR = -(-8.65 \times 10^3\text{ K})(8.314\text{ J}/(\text{mol}\cdot\text{K})) = 7.192 \times 10^4\text{ J/mol} = 71.9\text{ kJ/mol}.

02

The rate constant of a certain reaction increases by a factor of 4.004.00 when the temperature is raised from 300 K300\text{ K} to 320 K320\text{ K}. (a) Calculate the activation energy EaE_a in kJ/mol\text{kJ/mol}. (b) What would be the slope mm if this kinetic data were plotted as ln⁡k\ln k vs. 1/T1/T?

Answer

(a) Ea=55.3 kJ/molE_a = 55.3\text{ kJ/mol}; (b) m=−6.65×103 Km = -6.65 \times 10^3\text{ K}.

  1. Use the two-point Arrhenius equation: ln⁡(k2k1)=−EaR(1T2−1T1)\ln\left(\frac{k_2}{k_1}\right) = -\frac{E_a}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right).
  2. Substitute values: ln⁡(4.00)=−Ea8.314(1320−1300)  ⟹  1.3863=−Ea8.314(−2.0833×10−4)\ln(4.00) = -\frac{E_a}{8.314}\left(\frac{1}{320} - \frac{1}{300}\right) \implies 1.3863 = -\frac{E_a}{8.314}(-2.0833 \times 10^{-4}).
  3. Solve for EaE_a: Ea=1.3863×8.3142.0833×10−4=5.532×104 J/mol=55.3 kJ/molE_a = \frac{1.3863 \times 8.314}{2.0833 \times 10^{-4}} = 5.532 \times 10^4\text{ J/mol} = 55.3\text{ kJ/mol}.
  4. Calculate slope: m=−EaR=−5.532×1048.314=−6.65×103 Km = -\frac{E_a}{R} = -\frac{5.532 \times 10^4}{8.314} = -6.65 \times 10^3\text{ K}.
03

Two parallel reactions, Reaction 1 and Reaction 2, are plotted on the same Arrhenius axes (ln⁡k\ln k vs. 1/T1/T). Reaction 1 has a steeper negative slope (m1=−1.80×104 Km_1 = -1.80 \times 10^4\text{ K}) than Reaction 2 (m2=−0.90×104 Km_2 = -0.90 \times 10^4\text{ K}). (a) Which reaction has the higher activation energy? (b) Which reaction's rate is more sensitive to a change in temperature? Explain briefly using collision theory.

Answer

(a) Reaction 1 has the higher activation energy (Ea,1=150 kJ/molE_{a,1} = 150\text{ kJ/mol} vs. Ea,2=74.8 kJ/molE_{a,2} = 74.8\text{ kJ/mol}). Since Ea=−mRE_a = -mR, a more negative slope corresponds directly to a larger magnitude of EaE_a. (b) Reaction 1 is more sensitive to temperature changes. According to collision theory, a reaction with a higher energy barrier (EaE_a) has a much smaller initial fraction of collisions with E≥EaE \ge E_a. When temperature increases, the Maxwell-Boltzmann distribution shifts to higher energies, causing a proportionally much larger relative increase in particles exceeding the high threshold of Reaction 1 compared to the lower threshold of Reaction 2.

Loading workspace…