Resources
An industrial analytical sensor reports the concentration of trace benzene vapor (, ) in an enclosed nitrogen tank as by volume () at and . Liquid benzene has a density of . (a) Convert this gas-phase concentration into and calculate the number of benzene molecules per cubic centimeter () in this gas mixture. (b) Calculate the volume in cubic nanometers () occupied by a single benzene molecule in the liquid state versus the average volume available to a single benzene molecule in this gas state.
Answer and steps
Final answer
(a) Molar volume of an ideal gas at and is . For by volume, concentration . Number density in gas phase is . (b) In the liquid phase, molecular volume is . In the gas mixture, the volume per benzene molecule is .
Steps
Part (a): Mass Concentration and Molecular Number Density
- Calculate the molar volume of the gas mixture (): Using the ideal gas equation :
- Convert volume concentration to mass concentration (): A concentration of by volume corresponds to a mole fraction or volume fraction of . The moles of benzene per cubic meter of the gas mixture are: Multiplying by molar mass and converting grams to milligrams ():
- Calculate the number of benzene molecules per cubic centimeter (): Using Avogadro's number ():
Part (b): Molecular Volume Comparison in Liquid vs. Gas Phase
- Volume occupied by a single benzene molecule in liquid benzene (): The molar volume of liquid benzene is given by : Dividing by gives the volume per molecule: Since , :
- Average volume available per benzene molecule in the gas state (): The volume available to each benzene molecule is the reciprocal of the number density: Converting to :
Key Pitfall: Do not confuse the intrinsic volume of the molecule itself with the available volume per molecule in a dilute gas mixture. In the liquid, molecules are tightly packed, whereas in an gas mixture, each trace molecule is surrounded by a vast volume filled overwhelmingly by empty space and carrier gas () molecules.
Typical errors
01 The student uses standard temperature and pressure molar volume (22.4 L/mol at 273 K) instead of calculating the molar volume at 298 K, resulting in overstated concentrations and an understated gas volume.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You assumed the standard temperature and pressure (STP, ) molar volume of . Because the conditions given are and , you need to compute .
- Step 2Correct
Your conversion procedure from volume fraction to moles and then to mass concentration in was executed correctly, but the result is overstated due to the value of used in Step 1.
- Step 3Correct
Your conversion using Avogadro's number and scaling from to is completely correct, but the numerical answer inherits the earlier error.
- Step 4
- Step 5Correct
Your logic that the average volume per molecule is the reciprocal of the number density is sound, and your unit conversion to is correct, though downstream of the initial error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly translated into a volume fraction of .
You carried out every metric unit conversion correctly, including to , to , and to .
You accurately formulated the molecular volume of liquid benzene using its macroscopic density and Avogadro's number.
You correctly recognized that the average volume available per trace gas molecule is the reciprocal of its number density.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the standard molar gas volume of () out of habit rather than computing it at the stated temperature of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOver-relying on the memorized constant without checking whether the ambient temperature is standard temperature () or ambient room temperature ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Operating Temperature
The value is valid only at STP (, ). At room temperature (), .
Always compute directly whenever .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the ideal gas molar volume at : .
Determine moles of benzene in : .
Find mass concentration: .
Find number density: .
Determine gas-phase available volume: .
(a) , ; (b) ,
02 The student miscalculates the metric volume conversion between cubic centimeters and cubic nanometers by using (10⁷)³ instead of (10⁷)³, confusing 1 cm = 10⁷ nm with 1 cm = 10⁶ nm and yielding a volume conversion factor of 10¹⁸ instead of 10²¹.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You set instead of . Because and , the ratio is . Cubing this yields .
- Step 5Correct
Your reciprocal number density in is completely correct, but multiplying by the incorrect conversion factor propagated the error into your final gas volume answer.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the ideal gas molar volume at the given temperature and pressure.
You accurately converted volume fraction into mass concentration and molecular number density.
You correctly found the mass and volume of a single liquid benzene molecule from its density and molar mass.
You recognized that the volume available per molecule in a gas is the reciprocal of the molecular number density.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote (which corresponds to or ) instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the base metric exponents between centimeters () and nanometers (), forgetting that the difference in exponent is , which cubes to for cubic volume conversions.
REASONING PATH
Your ACEpath teacher’s suggested approach- Derive Compound Metric Unit Conversions from Base Units
Always convert linear prefixes back to meters first: and , so .
Write out the linear relationship with base meters before cubing both sides to obtain volume factors.
- Sanity Check Molecular Volumes
A typical small organic molecule like benzene has a diameter of roughly to , so its molecular volume in the liquid phase should be around to .
Compare calculated molecular volumes against the expected physical scale: a result of represents a subatomic volume rather than a molecule.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the correct linear conversion: , so .
Convert liquid volume: .
Convert gas volume: .
(a) Concentration ; Number density . (b) ; .
03 The student forgets to divide the molecules per cubic meter by 10⁶ when converting to molecules per cubic centimeter, incorrectly setting 1 m³ = 10³ cm³ and overstating the number density by a factor of 1000.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You divided by instead of when converting cubic meters to cubic centimeters. Because , the volume conversion is .
- Step 4
- Step 5Correct
Your method of inverting the number density was completely sound, but your result was affected by the number density error from Step 3.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the ideal gas law to determine the molar volume of the gas.
You accurately converted parts-per-million by volume into molar and mass concentration.
You correctly calculated the volume occupied by an individual molecule in the liquid phase from its density and molar mass.
You recognized that the average volume available to a molecule in the gas phase is the reciprocal of its number density.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided by rather than when converting to , likely confusing the linear conversion between meters and millimeters or liters with cubic centimeters.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisFailing to cube the linear dimensional factor when converting derived volume units ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Cubing Dimensional Prefixes
For any unit conversion between length units , the corresponding volume conversion is .
Always write out explicitly rather than relying on quick mental substitution.
CORRECTED PATH
ACEpath Teacher's DemonstrationDivide the volumetric number density in by the true conversion factor : .
Compute the reciprocal to obtain the average available volume per gas molecule: .
Convert to cubic nanometers using : .
(a) , ; (b) ,
Lock it in
What is the molar volume of an ideal gas at standard ambient temperature and pressure (SATP: , or )?
Approximately (at ) or (at ). The value applies only at (STP).
Similar question
A room contains by volume of carbon dioxide (, ) at and . Calculate the mass concentration of in .
Answer
. Key steps: . Moles of per . Mass concentration .
Liquid water has a density of (). Water vapor at and behaves as an ideal gas. Compare the volume of a single water molecule in the liquid state to the volume available per molecule in the steam state (both in ).
Answer
; (a ratio of ). Key steps: . For steam, . .
An exhaust stream contains sulfur dioxide (, ) at an elevated stack temperature of and . Determine the molecular number density of in and the average volume per molecule in .
Answer
; . Key steps: . Number density . Available volume .