Resources
An analytical chemistry student standardizes an aqueous sodium thiosulfate solution () using primary-standard potassium iodate (, molar mass ). First, an excess of potassium iodide and sulfuric acid is added to a sample of , liberating triiodide ions according to the unbalanced skeleton: . Second, the generated is titrated to a starch endpoint with the thiosulfate solution: . (a) Balance both net ionic equations. (b) If the titration requires of to reach the visual disappearance of the starch-iodine blue complex, calculate the molarity of the standardized thiosulfate solution to four significant figures.
Answer and steps
Final answer
(a) Step 1: ; Step 2: ; (b) Molarity of
Steps
Reaction between Iodate and Iodide in Acidic Solution
Part (a): Balancing the Net Ionic Equations
Use the half-reaction method in acidic medium:
-
Reduction half-reaction (iodate to triiodide):
- Write the skeleton:
- Balance iodine atoms:
- Balance oxygen atoms by adding :
- Balance hydrogen atoms by adding :
- Balance electric charge by adding electrons ( on left, on right add ):
-
Oxidation half-reaction (iodide to triiodide):
- Balance iodine atoms:
- Balance electric charge by adding electrons:
-
Equalize electron transfer and combine:
- Multiply the oxidation half-reaction by so both transfer :
- Add the two half-reactions:
- Divide all stoichiometric coefficients by to reach the simplest whole-number ratio:
Titration of Triiodide with Thiosulfate
- Reduction half-reaction:
- Oxidation half-reaction:
- Combine: Since both half-reactions involve , sum them directly:
Part (b): Calculating the Molarity of the Thiosulfate Solution
- Determine the moles of primary-standard :
-
Establish the stoichiometric ratio between and :
- From Step 1: produces .
- From Step 2: consumes .
- Therefore, the overall mole ratio is:
- Calculate the moles of reacted:
-
Compute the molarity () of the thiosulfate solution:
- Convert the volume to liters:
- Calculate concentration:
Expressed to four significant figures, the concentration is .
Typical errors
01 The student forgets that each mole of iodate produces 3 moles of triiodide, using a 1:1 ratio between IO3- and I3- to obtain an overall 1:2 ratio instead of 1:6.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
According to your balanced reaction in Step 1, of produces of . You assumed a 1:1 ratio instead of multiplying by 3.
- Step 4Correct
You correctly applied the 2:1 ratio between thiosulfate and triiodide, but this calculation inherited the incorrect mole quantity from the previous step.
- Step 5Correct
Your molarity calculation method () is correct, but the result is one-third of the true value due to the carried-forward error.
WHAT YOU DID WELL
Compliments from Your TeacherYou balanced both complex redox equations with complete accuracy.
You calculated the molar amount of primary-standard potassium iodate accurately to four significant figures.
You recognized that each mole of triiodide reacts with two moles of thiosulfate.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn multi-step iodometric titrations, the intermediate species (here, triiodide) links the primary standard to the titrant. You bypassed the stoichiometric coefficient of triiodide from the generation reaction and treated the intermediate conversion as 1:1.
REASONING PATH
Your ACEpath teacher’s suggested approach- Chained Stoichiometry Ratio
When an intermediate connects two reactions, multiply the mole ratios across each stage: .
Always write out the combined factor label string before plugging in numbers: .
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate moles of produced: .
Calculate moles of required: .
Divide by the titration volume in liters: .
02 The student balances the generation reaction for elemental iodine (I2) instead of triiodide (I3-), giving an incorrect coefficient of 5 for iodide and 3 for I2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The prompt specified that iodate and iodide react to generate triiodide ions (), not neutral elemental iodine (). When balancing for , the reduction half-reaction produces and the oxidation of also forms , requiring rather than .
- Step 2
- Step 3
- Step 4
- Step 5
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly balanced the triiodide-thiosulfate redox titration reaction in Step 2.
You correctly calculated the moles of potassium iodate primary standard from its mass and molar mass.
You correctly identified the overall stoichiometric relationship between iodate and thiosulfate to determine the final solution concentration.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou wrote elemental iodine () as the product in the first reaction instead of the triiodide ion () indicated in the prompt, leading to the conventional equation instead of the required stoichiometry.
REASONING PATH
Your ACEpath teacher’s suggested approach- Match the Specified Skeleton Species
Always balance using the exact chemical species provided in the problem prompt rather than recalling a similar textbook reaction.
Check the given skeleton equation before starting half-reactions; here, triiodide () was specified, not .
- Charge Balance Verification
Both sides of a balanced net ionic equation must have the exact same total net charge.
For , verify the charge: on the left and on the right.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the reduction half-reaction: .
Write the oxidation half-reaction: .
Multiply the oxidation half-reaction by to balance electrons: .
Combine and simplify by dividing by : .
(a) Step 1: ; Step 2: ; (b) Molarity of
03 The student forgets to convert the titrant volume from milliliters to liters when calculating molarity, resulting in an answer three orders of magnitude too small.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
Molarity is defined as moles of solute per liter of solution (). Because you divided by directly instead of converting to , your result is off by a factor of .
WHAT YOU DID WELL
Compliments from Your TeacherYou balanced both complex redox equations accurately.
You calculated the moles of potassium iodate correctly from the given mass.
You correctly linked the two reactions through the intermediate triiodide to find the moles of thiosulfate.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the titrant volume directly in milliliters () instead of converting it to liters ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisInattention to dimensional analysis when evaluating concentration, overlooking that molarity () requires volume strictly in liters.
REASONING PATH
Your ACEpath teacher’s suggested approach- Molarity Definition and Units
.
Always convert titrant burette volumes from milliliters () to liters () by multiplying by before computing molarity.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the volume of titrant from milliliters to liters: .
Compute the concentration: .
Round to four significant figures to match the measured quantities: .
Lock it in
In an iodometric standardization using , what is the overall stoichiometric mole ratio of consumed to added?
6 to 1 (), because and each requires .
Similar question
A sample of primary-standard () is treated with excess and acid. The liberated triiodide requires of to titrate. What is the molarity of the sodium thiosulfate solution to four significant figures?
Answer
. Key steps: . Overall ratio is , giving . .
In another indirect titration, bromate standardizes thiosulfate via the reactions: followed by . If of () requires of thiosulfate, find the thiosulfate molarity.
Answer
. Key steps: . Overall ratio is , so . .
A aliquot of bleach (containing ) is treated with excess in acid: . The generated is titrated with , requiring . Calculate the molar concentration of in the original bleach.
Answer
. Key steps: . Ratio is (overall ). . .