Resources
A galvanic cell couples an aluminum half-cell (, ) with an acidified dichromate half-cell (, ) using an inert platinum electrode in the cathode compartment. (a) Identify the anode and the cathode. (b) Specify the direction of electron flow in the external circuit. (c) Write the balanced overall spontaneous equation. (d) Calculate the standard Gibbs free energy change for the reaction in ().
Answer and steps
Final answer
(a) Anode: , Cathode: ; (b) Electrons flow from the electrode to the electrode; (c) ; (d) (or ).
Steps
Part (a): Identify the Anode and the Cathode
To determine which half-reaction undergoes reduction and which undergoes oxidation in a spontaneous galvanic cell:
- Compare the standard reduction potentials:
- The half-cell with the more positive reduction potential proceeds as a reduction at the cathode: Because all species involved in this half-reaction are in aqueous solution or liquid form, an inert conductive solid is needed. The physical cathode is the electrode.
- The half-cell with the more negative reduction potential is forced to run in reverse as an oxidation at the anode: The physical anode is the electrode.
- Anode:
- Cathode:
Part (b): Direction of Electron Flow
In any electrochemical cell, oxidation releases electrons at the anode, and reduction consumes electrons at the cathode.
- Therefore, electrons flow through the external wire from the electrode (anode) to the electrode (cathode).
Part (c): Balanced Overall Spontaneous Equation
Multiply the oxidation half-reaction by so that the number of electrons transferred equals the in the reduction half-reaction:
- Oxidation (Anode):
- Reduction (Cathode):
Adding the two half-reactions cancels out the :
Part (d): Standard Gibbs Free Energy Change ()
- Calculate the standard cell potential ():
-
Relate to : where:
- (the total number of electrons transferred in the balanced equation)
- Substitute the values:
Typical errors
01 The student misidentifies the cathode material as Cr(s) or Cr3+ instead of the inert platinum electrode specified in the problem.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
,
Correct,
You correctly determined that oxidation occurs in the aluminum half-cell (making the anode) and reduction occurs in the dichromate half-cell. However, all species in the dichromate half-reaction (, , , and ) are in aqueous solution or liquid form. Because there is no solid chromium metal involved, the physical conducting surface where reduction takes place is the inert platinum () electrode.
- Step 2Correct
You correctly identified the fundamental principle that electrons flow through the external circuit from anode to cathode. This statement was only marked affected because it inherited your misidentified cathode material from part (a).
- Step 3
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified which half-cell undergoes oxidation (anode) and which undergoes reduction (cathode) based on standard reduction potentials.
You correctly stated that electrons flow from the anode to the cathode in the external wire.
You successfully balanced the net spontaneous redox equation by equating the number of electrons transferred.
You accurately calculated the cell potential and standard Gibbs free energy change.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that every half-cell has a solid electrode made of the active element (chromium), overlooking the fact that redox half-reactions containing only ions, gases, or liquids require an inert solid conductor (such as or graphite) to serve as the physical electrode.
REASONING PATH
Your ACEpath teacher’s suggested approach- Phase Check for Electrodes
An electrode must be a conductive solid. If a half-reaction contains only aqueous or liquid/gas species (e.g., or ), it cannot form its own physical electrode.
Inspect the phases of the species in the half-reaction. If no solid metal is present, name the inert electrode (typically or graphite) as the anode or cathode.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the physical state of all chemical species in the cathode compartment: , , , and .
Recognize that none of these species is a solid metal electrode.
Locate the solid conductor provided in the compartment, which is the inert platinum wire/plate: .
(a) Anode: , Cathode: ; (b) Electrons flow from the anode to the cathode.
02 The student uses n = 3 instead of n = 6 when calculating ΔG°, failing to account for the total number of electrons transferred in the balanced overall reaction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
,
- Step 2
- Step 3
- Step 4
- Step 5Correct
You set , which is the number of electrons in a single unscaled aluminum half-reaction. Because you multiplied the aluminum half-reaction by 2 to balance with dichromate's , the total number of moles of electrons transferred in the balanced cell equation is .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the anode and cathode from their standard reduction potentials.
You correctly identified the direction of electron flow from the anode to the cathode.
You successfully balanced the full redox reaction with respect to mass and charge.
You accurately calculated the standard cell potential .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou selected from the individual aluminum half-reaction () rather than using the common multiple of electrons transferred in the balanced overall equation ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Finding $n$ for Thermodynamic Calculations
In , the value of must match the total moles of electrons canceled out when combining the two half-reactions into the balanced net reaction.
Always verify how many electrons were canceled out when summing the oxidation and reduction half-reactions before plugging into .
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify total electrons transferred: and , so .
Substitute into the Gibbs free energy formula: .
Compute the numerical value: .
(or )
03 The student scales the reduction potential by the stoichiometric coefficient when multiplying the aluminum half-reaction by 2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
,
- Step 2
- Step 3
- Step 4Correct
You multiplied the oxidation potential of aluminum by . Standard electrode potential is an intensive property (energy per unit charge, ), so it does not scale with stoichiometric coefficients.
- Step 5Correct
You correctly set up the formula with , but the numerical value was affected by the incorrect from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the physical anode and cathode electrodes.
You correctly determined the direction of external electron flow from anode to cathode.
You correctly balanced the overall cell reaction by equalizing electron transfer to .
You selected and applied the correct relationship .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou scaled by multiplying by 2 when balancing the half-reaction.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing intensive properties (, in volts or joules per coulomb) with extensive thermodynamic properties (such as or , in joules). Changing the stoichiometric multiplier changes the mole quantity , not the electric potential difference .
REASONING PATH
Your ACEpath teacher’s suggested approach- Intensive vs. Extensive Properties
Potential is ratio-based: . Multiplying a reaction increases both energy and charge by the same factor, leaving the voltage unchanged.
Never multiply by any stoichiometric factor. Simply compute using standard table values directly.
- Where Stoichiometry Belongs
In , the stoichiometric factor is already captured by the number of transferred electrons, .
If you multiply the reaction, only adjust in the free energy formula; keep constant.
CORRECTED PATH
ACEpath Teacher's DemonstrationKeep the standard potentials unscaled: and .
Calculate .
Substitute , , and into .
Calculate .
(a) Anode: , Cathode: ; (b) Electrons flow from to ; (c) ; (d) (or ).
Lock it in
When does an electrochemical half-cell require an inert electrode such as or graphite?
When all chemical species in the half-reaction are aqueous, liquid, or gaseous, an inert solid conductor is needed to transfer electrons.
Similar question
A galvanic cell couples an iron half-cell (, ) with a permanganate half-cell (, ) using a platinum electrode in the permanganate compartment. (a) Identify the physical anode and cathode. (b) State the direction of electron flow.
Answer
(a) Anode: , Cathode: ; (b) Electrons flow through the external circuit from the electrode to the electrode. Key step: The permanganate reduction involves only aqueous and liquid species, so the inert is the physical cathode.
Consider a concentration cell with hydrogen half-cells: . Both compartments use platinum electrodes immersed in acid with bubbling . Write the shorthand cell notation (line notation) for this cell, clearly indicating the anode and cathode materials.
Answer
. Key step: Because is a gas and is aqueous, inert must serve as the terminal electrode at both outer ends.
A cell operates with the spontaneous reaction: . If you construct this galvanic cell, what metal strip would you choose for the cathode, and what would happen to its mass over time as the cell discharges?
Answer
Choose an inert conductor such as or graphite for the cathode. Its mass remains constant because reduces to soluble ; no solid plates out onto the cathode.