Resources
Consider the vaporization of liquid water at () and a constant pressure of : . The standard enthalpy of vaporization is . Treating the resulting water vapor as an ideal gas and neglecting the molar volume of the liquid relative to the gas, determine: (a) the work done by the system per mole of water vaporized (using the thermodynamic sign convention ), and (b) the change in internal energy per mole in kilojoules. Take the universal gas constant as . Express both quantities in to four significant figures.
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Determining the Work Done ()
- Relate expansion work to pressure and volume: For a process occurring against a constant external pressure , the expansion work done on or by the system using the thermodynamic convention is:
-
Apply the ideal gas approximation: The molar volume of liquid water () is negligible compared to the molar volume of water vapor (). Therefore, .
Assuming the vapor behaves as an ideal gas for : Substituting into the work formula gives:
-
Calculate the numerical value: Substitute the given values for , , and :
Converting to kilojoules per mole: (A negative sign confirms that work is done by the system expanding against the atmospheric surroundings.)
Part (b): Determining the Change in Internal Energy ()
-
Apply the First Law of Thermodynamics: At constant pressure, the heat transferred to vaporize the water is equal to the enthalpy of vaporization:
Using the first-law relation : or equivalently,
- Calculate :
Physical insight: Of the supplied as heat (), approximately is used to overcome the intermolecular hydrogen bonds in liquid water to separate the molecules into the gas phase (), while the remaining is expended as work to push back the atmosphere.
Typical errors
01 The student misapplies the thermodynamic sign convention for work done by the system on the surroundings, setting work as positive instead of negative.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Under the IUPAC thermodynamic sign convention where , expansion work done by the system against the surroundings is defined as . Because the gas expands (), work is done by the system, so must be negative.
- Step 2Correct
Your first-law formula is correct, but substituting positive instead of caused an incorrect internal energy change. Some of the supplied heat is expended doing work on the surroundings, meaning must be smaller than .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly approximated the change in volume using the ideal gas law as .
You carried out the unit conversion from to accurately.
You correctly stated the first-law formula for a constant-pressure process.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the physics convention (where work done by the system is positive, and ) with the IUPAC chemistry convention (where energy entering the system is positive, and ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Expansion vs. Compression Work Sign
In , work done on the system increases its energy (, compression), while work done by the system decreases its energy (, expansion: ).
Whenever a gas expands against external pressure, write down with an explicit negative sign.
- Physical Reality Check for Vaporization
Heat supplied () goes into two places: breaking intermolecular attractions () and pushing back the atmosphere ().
Verify that , because a portion of the absorbed heat is spent pushing back the surrounding air.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet .
Substitute into the first-law equation: .
(a) ; (b)
02 The student forgets to convert work from joules to kilojoules before adding it to enthalpy, leading to an incorrect internal energy change.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You correctly stated the First Law relation , but you substituted instead of your converted value . Mixing unscaled joules with kilojoules caused a discrepancy by a factor of .
- Step 3Correct
This final result directly reflects the unit substitution error from the previous line.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the work done during phase expansion against constant pressure can be approximated as .
You correctly applied the thermodynamic sign convention where expansion work done by the system is negative.
You accurately converted the raw work value from to in part (a).
You recognized that at constant pressure, .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou successfully converted to in part (a), but accidentally picked up the pre-conversion number when evaluating part (b).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisFailing to cross-check dimensional consistency when combining thermal quantities (, often tabulated in ) with mechanical quantities (, natively evaluated from in ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Gas Constant Units vs. Enthalpy Units
The gas constant yields work in joules (), while standard enthalpies are almost always given in kilojoules ().
Always divide by to get before adding or subtracting it from .
- Sign and Magnitude Sanity Check
Vaporizing a liquid requires breaking strong intermolecular interactions (hydrogen bonds in water), so internal energy must increase ().
If your calculated turns out negative or orders of magnitude larger than , immediately inspect your work term for a missing factor.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite out the values with their matching units before adding: and .
Substitute into the first law equation: .
Perform the arithmetic: .
(a) ; (b)
03 The student confuses Celsius and Kelvin temperatures, substituting 100.0 instead of 373.15 K into the ideal gas work expression.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You substituted instead of the absolute temperature ().
- Step 3
- Step 4Correct
Your arithmetic in this step follows your previous value of , but the result is inaccurate due to the earlier temperature substitution error.
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the correct thermodynamic formulas for expansion work and internal energy change.
You correctly identified the sign convention for work done by an expanding system.
You handled unit conversions between joules and kilojoules accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou attached the Kelvin unit directly to the Celsius numerical value rather than using .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the absolute temperature requirement in gas law expressions (), where temperatures given in degrees Celsius must be shifted by adding before substitution.
REASONING PATH
Your ACEpath teacher’s suggested approach- Absolute Temperature in Ideal Gas Relations
Any formula containing the universal gas constant (such as or ) strictly requires absolute temperature in Kelvins: .
Always convert Celsius to Kelvin before calculating work or gas volumes, even if the temperature is a common reference point like .
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b)
Lock it in
Under the IUPAC convention , what is the formula and sign of expansion work against constant pressure ?
. For expansion (), work is negative () because the system expends energy on its surroundings.
Similar question
One mole of ethanol, , is vaporized at its normal boiling point of () at . Its standard enthalpy of vaporization is . Treating the vapor as an ideal gas and neglecting liquid volume, calculate (a) in and (b) in . Use .
Answer
(a) . (b) .
Consider the complete combustion of propane gas at and : . For this reaction, . Calculate the expansion work and the change in internal energy for the combustion of of propane, using .
Answer
- Find change in gaseous moles: .
- Work done: . (Compression work done on system).
- Internal energy change: .
A sample containing of an ideal gas expands isothermally and reversibly at from an initial volume of to a final volume of . Calculate (a) the work under the convention , and (b) the heat absorbed by the gas in kilojoules.
Answer
(a) For a reversible isothermal expansion of an ideal gas: . (b) For an isothermal process involving an ideal gas, , so .