Resources

An impure sample of malachite ore containing copper(II) carbonate basic salt is evaluated for copper recovery. A student reacts a sample containing 1.500×10−4 mol1.500\times 10^{-4}\text{ mol} of Cu2+\text{Cu}^{2+} ions with excess sodium borohydride to precipitate elemental copper nanoparticles. Due to the high surface energy and extreme dilution, 1.85×10−5 mol1.85\times 10^{-5}\text{ mol} of copper remains suspended as non-filterable colloid or dissolved complexes. If 7.15 mg7.15\text{ mg} of copper metal (molar mass 63.55 g/mol63.55\text{ g/mol}) is isolated on a membrane filter, calculate (a) the theoretical yield of copper in milligrams, (b) the percent yield obtained, and (c) the theoretical maximum percent yield achievable if the colloidal loss represents an inescapable solubility limit.

Answer and steps

Final answer

(a) Theoretical yield = 9.53 mg9.53\text{ mg}; (b) Percent yield = 75.0%75.0\%; (c) Maximum achievable yield limit = 87.7%87.7\%

Steps

Part (a): Theoretical Yield of Copper

The theoretical yield is the maximum mass of product that could be formed from the given amount of reactant, assuming complete 100%100\% conversion.

  1. Relate moles of reactant to product:
    The reduction of copper(II) ions by sodium borohydride reduces each CuX2+\ce{Cu^2+} ion to one elemental copper atom (Cu\ce{Cu}): CuX2++2 eX−→Cu\ce{Cu^2+ + 2e- -> Cu} Therefore, the theoretical moles of copper produced equal the initial moles of CuX2+\ce{Cu^2+}: ntheor=1.500×10−4 moln_{\text{theor}} = 1.500 \times 10^{-4}\text{ mol}
  2. Convert moles to milligrams:
    Using the molar mass of copper (M=63.55 g/molM = 63.55\text{ g/mol}): mtheor=ntheor⋅M=(1.500×10−4 mol)⋅(63.55 g/mol)=9.5325×10−3 gm_{\text{theor}} = n_{\text{theor}} \cdot M = (1.500 \times 10^{-4}\text{ mol}) \cdot (63.55\text{ g/mol}) = 9.5325 \times 10^{-3}\text{ g} Convert grams to milligrams (1 g=1000 mg1\text{ g} = 1000\text{ mg}): mtheor=9.5325 mg≈9.53 mgm_{\text{theor}} = 9.5325\text{ mg} \approx 9.53\text{ mg}

Part (b): Percent Yield Obtained

The percent yield compares the mass of product actually isolated (actual yield) to the theoretical maximum possible (theoretical yield):

Percent Yield=Actual YieldTheoretical Yield×100%\text{Percent Yield} = \frac{\text{Actual Yield}}{\text{Theoretical Yield}} \times 100\%

Substitute the known values: Percent Yield=7.15 mg9.5325 mg×100%=75.006%≈75.0%\text{Percent Yield} = \frac{7.15\text{ mg}}{9.5325\text{ mg}} \times 100\% = 75.006\% \approx 75.0\%

Pitfall to avoid: Do not round intermediate values excessively before calculating the percent yield. Using the unrounded theoretical yield (9.5325 mg9.5325\text{ mg}) prevents rounding errors in the final percentage.


Part (c): Maximum Achievable Percent Yield

When an inescapable physical limit (such as colloid suspension or solubility) prevents full recovery, the maximum possible yield is constrained:

  1. Calculate the maximum recoverable moles of copper:
    Subtract the unfilterable colloidal copper from the total initial moles: nmax=ntotal−nloss=1.500×10−4 mol−0.185×10−4 mol=1.315×10−4 moln_{\text{max}} = n_{\text{total}} - n_{\text{loss}} = 1.500 \times 10^{-4}\text{ mol} - 0.185 \times 10^{-4}\text{ mol} = 1.315 \times 10^{-4}\text{ mol}
  2. Calculate the maximum achievable percent yield:
    Compare the maximum recoverable moles directly to the total theoretical moles: Maximum Yield Limit=nmaxntheor×100%=1.315×10−4 mol1.500×10−4 mol×100%\text{Maximum Yield Limit} = \frac{n_{\text{max}}}{n_{\text{theor}}} \times 100\% = \frac{1.315 \times 10^{-4}\text{ mol}}{1.500 \times 10^{-4}\text{ mol}} \times 100\% Maximum Yield Limit=1.3151.500×100%≈87.7%\text{Maximum Yield Limit} = \frac{1.315}{1.500} \times 100\% \approx 87.7\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts the colloidal loss before finding the theoretical yield in part (a), confusing the initial theoretical maximum based on stoichiometry with the practically recoverable limit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(Cu)=1.500×10−4−1.85×10−5=1.315×10−4 mol  ⟹  Theoretical yield=1.315×10−4 mol×63.55 g/mol×1000 mg/g=8.36 mgn(\text{Cu}) = 1.500 \times 10^{-4} - 1.85 \times 10^{-5} = 1.315 \times 10^{-4}\text{ mol} \implies \text{Theoretical yield} = 1.315 \times 10^{-4}\text{ mol} \times 63.55\text{ g/mol} \times 1000\text{ mg/g} = 8.36\text{ mg}

    Correct

    ntheor=1.500×10−4 mol  ⟹  mtheor=(1.500×10−4 mol)(63.55 g/mol)(1000 mg/g)=9.53 mgn_{\text{theor}} = 1.500 \times 10^{-4}\text{ mol} \implies m_{\text{theor}} = (1.500 \times 10^{-4}\text{ mol})(63.55\text{ g/mol})(1000\text{ mg/g}) = 9.53\text{ mg}

    Theoretical yield is determined solely by the stoichiometric amount of the limiting reactant assuming complete conversion without any physical losses. You should not deduct colloidal or handling losses from the theoretical yield.

  2. Step 2

    Percent yield=(7.15 mg8.36 mg)×100%=85.5%\text{Percent yield} = \left(\frac{7.15\text{ mg}}{8.36\text{ mg}}\right) \times 100\% = 85.5\%

    Correct

    Percent yield=(7.15 mg9.5325 mg)×100%=75.0%\text{Percent yield} = \left(\frac{7.15\text{ mg}}{9.5325\text{ mg}}\right) \times 100\% = 75.0\%

    You applied the correct definition for percent yield, but your numerical result was affected by the premature subtraction in part (a).

  3. Step 3

    Maximum theoretical percent yield=100%\text{Maximum theoretical percent yield} = 100\%

    Correct

    Maximum Yield Limit=1.500×10−4 mol−1.85×10−5 mol1.500×10−4 mol×100%=1.315×10−4 mol1.500×10−4 mol×100%=87.7%\text{Maximum Yield Limit} = \frac{1.500 \times 10^{-4}\text{ mol} - 1.85 \times 10^{-5}\text{ mol}}{1.500 \times 10^{-4}\text{ mol}} \times 100\% = \frac{1.315 \times 10^{-4}\text{ mol}}{1.500 \times 10^{-4}\text{ mol}} \times 100\% = 87.7\%

    Part (c) accounts specifically for the inescapable colloidal loss (1.85×10−5 mol1.85 \times 10^{-5}\text{ mol}) as a practical cap on the maximum achievable percent yield relative to the ideal theoretical yield.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the molar mass of copper to convert moles to milligrams.

You set up the ratio of actual yield to theoretical yield correctly for calculating percent yield.

You performed accurate unit conversions between grams and milligrams.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Theoretical Yield with Recoverable Yield

You subtracted the colloidal loss during the theoretical yield calculation instead of reserving it for the achievable recovery limit in part (c).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating ideal stoichiometric yield with practical recovery limits. Theoretical yield is an ideal benchmark derived entirely from the balanced chemical equation and initial limiting reactant quantity, independent of real-world physical losses such as solubility, side reactions, or colloidal suspension.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Theoretical Yield
  • Theoretical Yield=nlimiting reactant×stoichiometric ratio×Mproduct\text{Theoretical Yield} = n_{\text{limiting reactant}} \times \text{stoichiometric ratio} \times M_{\text{product}}

  • Never subtract physical losses, equilibrium limits, or filtering losses when calculating theoretical yield.

Accounting for Inescapable Losses
  • Max Achievable %=ntheoretical−ninescapable lossntheoretical×100%\text{Max Achievable \%} = \frac{n_{\text{theoretical}} - n_{\text{inescapable loss}}}{n_{\text{theoretical}}} \times 100\%

  • Apply physical loss constraints only when evaluating practical recovery ceilings, comparing recoverable product against the ideal theoretical benchmark.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the theoretical yield directly from initial moles of CuX2+\ce{Cu^2+}: mtheor=(1.500×10−4 mol)×(63.55 g/mol)×1000 mg/g=9.5325 mg≈9.53 mgm_{\text{theor}} = (1.500 \times 10^{-4}\text{ mol}) \times (63.55\text{ g/mol}) \times 1000\text{ mg/g} = 9.5325\text{ mg} \approx 9.53\text{ mg}.

  2. Calculate percent yield using isolated mass over theoretical mass: Percent yield=7.15 mg9.5325 mg×100%=75.0%\text{Percent yield} = \frac{7.15\text{ mg}}{9.5325\text{ mg}} \times 100\% = 75.0\%.

  3. Determine maximum achievable percent yield under colloidal loss limit: Max %=1.500×10−4 mol−1.85×10−5 mol1.500×10−4 mol×100%=1.315×10−4 mol1.500×10−4 mol×100%=87.7%\text{Max \%} = \frac{1.500 \times 10^{-4}\text{ mol} - 1.85 \times 10^{-5}\text{ mol}}{1.500 \times 10^{-4}\text{ mol}} \times 100\% = \frac{1.315 \times 10^{-4}\text{ mol}}{1.500 \times 10^{-4}\text{ mol}} \times 100\% = 87.7\%.

Final answer

(a) Theoretical yield = 9.53 mg9.53\text{ mg}; (b) Percent yield = 75.0%75.0\%; (c) Maximum achievable yield limit = 87.7%87.7\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental definition of theoretical yield as an ideal 100%100\% stoichiometric conversion.

  • Practice distinguishing between stoichiometry-based calculations and physical separation recovery limits.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the maximum achievable yield in part (c) by dividing the actual recovered amount by the recoverable limit rather than comparing the maximum recoverable amount to the total initial amount.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Theoretical yield=1.500×10−4 mol×63.55 g/mol×1000 mg/g=9.53 mg\text{Theoretical yield} = 1.500 \times 10^{-4}\text{ mol} \times 63.55\text{ g/mol} \times 1000\text{ mg/g} = 9.53\text{ mg}

  2. Step 2

    Percent yield=(7.15 mg/9.53 mg)×100%=75.0%\text{Percent yield} = (7.15\text{ mg} / 9.53\text{ mg}) \times 100\% = 75.0\%

  3. Step 3

    Max recoverable mass=(1.500×10−4−0.185×10−4)×63.55×1000=8.36 mg\text{Max recoverable mass} = (1.500 \times 10^{-4} - 0.185 \times 10^{-4}) \times 63.55 \times 1000 = 8.36\text{ mg}

  4. Step 4

    Maximum theoretical percent yield=(7.15 mg8.36 mg)×100%=85.5%\text{Maximum theoretical percent yield} = \left(\frac{7.15\text{ mg}}{8.36\text{ mg}}\right) \times 100\% = 85.5\%

    Correct

    Maximum theoretical percent yield=8.357 mg9.533 mg×100%=87.7%\text{Maximum theoretical percent yield} = \frac{8.357\text{ mg}}{9.533\text{ mg}} \times 100\% = 87.7\%

    You placed the actual isolated mass (7.15 mg7.15\text{ mg}) in the numerator, which calculates the fraction of the recovery ceiling you achieved rather than the theoretical yield limit itself. To find the maximum achievable percent yield, divide the maximum recoverable amount by the total theoretical starting amount.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the stoichiometric moles of copper into milligrams to find the theoretical yield.

You applied the percent yield formula accurately in part (b).

You correctly accounted for the colloidal loss when computing the maximum recoverable mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ratio definition confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the ceiling efficiency of the process (how close the isolated mass came to the physical recovery ceiling) with the theoretical maximum percent yield achievable by the system (the recovery ceiling compared to the 100% stoichiometric baseline).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define 'Theoretical Maximum Percent Yield'
  • Theoretical yields and limits depend solely on system inputs and physical constraints, completely independent of actual experimental recovery.

  • Express the maximum possible product recovery as a percentage of the stoichiometric theoretical yield: Maximum Recoverable ProductTheoretical Yield×100%\frac{\text{Maximum Recoverable Product}}{\text{Theoretical Yield}} \times 100\%.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the maximum recoverable copper mass (8.357 mg8.357\text{ mg}) and the total theoretical yield (9.533 mg9.533\text{ mg}).

  2. Calculate the maximum achievable percent yield: 8.357 mg9.533 mg×100%=87.7%\frac{8.357\text{ mg}}{9.533\text{ mg}} \times 100\% = 87.7\% (or directly via moles: 1.315×10−4 mol1.500×10−4 mol×100%=87.7%\frac{1.315 \times 10^{-4}\text{ mol}}{1.500 \times 10^{-4}\text{ mol}} \times 100\% = 87.7\%).

Final answer

(a) 9.53 mg9.53\text{ mg}; (b) 75.0%75.0\%; (c) 87.7%87.7\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that any 'theoretical yield' value (including maximum achievable yield) is determined entirely by reactants and physical limits, before considering actual lab results.

  • Check that actual recovered product only appears when evaluating the actual percent yield achieved in the trial.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert grams to milligrams when determining the theoretical yield, resulting in a theoretical yield off by a factor of 1000 and an impossibly large percent yield.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Theoretical yield=1.500×10−4 mol×63.55 g/mol=0.00953 mg\text{Theoretical yield} = 1.500 \times 10^{-4}\text{ mol} \times 63.55\text{ g/mol} = 0.00953\text{ mg}

    Correct

    Theoretical yield=1.500×10−4 mol×63.55 g/mol=9.5325×10−3 g=9.53 mg\text{Theoretical yield} = 1.500 \times 10^{-4}\text{ mol} \times 63.55\text{ g/mol} = 9.5325 \times 10^{-3}\text{ g} = 9.53\text{ mg}

    Multiplying moles by molar mass (g/mol\text{g/mol}) gives the mass in grams (0.00953 g0.00953\text{ g}). You need to multiply by 1000 mg/g1000\text{ mg/g} to convert to milligrams, giving 9.53 mg9.53\text{ mg}.

  2. Step 2

    Percent yield=(7.15 mg0.00953 mg)×100%=75000%\text{Percent yield} = \left(\frac{7.15\text{ mg}}{0.00953\text{ mg}}\right) \times 100\% = 75000\%

    Correct

    Percent yield=(7.15 mg9.5325 mg)×100%=75.0%\text{Percent yield} = \left(\frac{7.15\text{ mg}}{9.5325\text{ mg}}\right) \times 100\% = 75.0\%

    You applied the percent yield formula correctly, but your result was off by a factor of 10001000 because you substituted the uncoverted theoretical yield from part (a).

  3. Step 3

    Recoverable moles=1.500×10−4−1.85×10−5=1.315×10−4 mol  ⟹  Maximum percent yield=(1.315×10−41.500×10−4)×100%=87.7%\text{Recoverable moles} = 1.500 \times 10^{-4} - 1.85 \times 10^{-5} = 1.315 \times 10^{-4}\text{ mol} \implies \text{Maximum percent yield} = \left(\frac{1.315 \times 10^{-4}}{1.500 \times 10^{-4}}\right) \times 100\% = 87.7\%

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the 1:11:1 stoichiometric relationship between CuX2+\ce{Cu^2+} and elemental Cu\ce{Cu}.

You correctly set up the formula for percent yield as actualtheoretical×100%\frac{\text{actual}}{\text{theoretical}} \times 100\%.

You accurately accounted for the colloidal loss to find the maximum possible recovery limit in part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omitted

You attached the unit 'mg' directly to the result of mol×g/mol\text{mol} \times \text{g/mol} without multiplying by 1000 mg/g1000\text{ mg/g}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that standard molar mass expresses mass in grams per mole, which requires an explicit metric prefix conversion (1 g=1000 mg1\text{ g} = 1000\text{ mg}) when comparing with masses given in milligrams.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Molar Mass Units
  • Mass (g)=moles×M (g/mol)\text{Mass (g)} = \text{moles} \times M\text{ (g/mol)}. Molar mass always yields grams, never milligrams.

  • Always write out grams first, then multiply by 103 mg/g10^3\text{ mg/g} before substituting into equations with milligrams.

Sanity-Check Percent Yield
  • In standard chemical reactions without external contaminants, percent yield cannot exceed 100%100\%.

  • If your percent yield calculation yields a value significantly greater than 100%100\%, immediately inspect both masses for mismatched units.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Theoretical yield=(1.500×10−4 mol)×(63.55 g/mol)=9.5325×10−3 g\text{Theoretical yield} = (1.500 \times 10^{-4}\text{ mol}) \times (63.55\text{ g/mol}) = 9.5325 \times 10^{-3}\text{ g}

  2. Theoretical yield in mg=9.5325×10−3 g×1000 mg1 g=9.53 mg\text{Theoretical yield in mg} = 9.5325 \times 10^{-3}\text{ g} \times \frac{1000\text{ mg}}{1\text{ g}} = 9.53\text{ mg}

  3. Percent yield=7.15 mg9.5325 mg×100%=75.0%\text{Percent yield} = \frac{7.15\text{ mg}}{9.5325\text{ mg}} \times 100\% = 75.0\%

Final answer

(a) 9.53 mg9.53\text{ mg}; (b) 75.0%75.0\%; (c) 87.7%87.7\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice tracking dimensional units explicitly across every multiplication step to catch metric prefix conversions.

  • Perform a quick feasibility check whenever a calculated percent yield exceeds 100%100\%.

Lock it in

Similar question

01

A student reacts 2.00×10−3 mol2.00 \times 10^{-3}\text{ mol} of AgX+\ce{Ag+} with excess chloride to form AgCl\ce{AgCl} (M=143.32 g/molM = 143.32\text{ g/mol}). If 0.250 g0.250\text{ g} of AgCl\ce{AgCl} is collected, calculate (a) the theoretical yield of AgCl\ce{AgCl} in grams, and (b) the percent yield.

Answer

(a) Theoretical yield=(2.00×10−3 mol)(143.32 g/mol)=0.287 g\text{Theoretical yield} = (2.00 \times 10^{-3}\text{ mol})(143.32\text{ g/mol}) = 0.287\text{ g}. (b) Percent yield=0.250 g0.2866 g×100%=87.2%\text{Percent yield} = \frac{0.250\text{ g}}{0.2866\text{ g}} \times 100\% = 87.2\%.

02

Precipitation of barium sulfate (M=233.39 g/molM = 233.39\text{ g/mol}) from 5.00×10−4 mol5.00 \times 10^{-4}\text{ mol} of BaX2+\ce{Ba^2+} produces an isolated precipitate of 105 mg105\text{ mg}. A known solubility loss accounts for 1.20×10−5 mol1.20 \times 10^{-5}\text{ mol} of unprecipitated BaX2+\ce{Ba^2+}. Calculate (a) the theoretical yield in milligrams, (b) the percent yield, and (c) the maximum achievable percent yield under this solubility limit.

Answer

(a) Theoretical yield=(5.00×10−4 mol)(233.39 g/mol)(1000 mg/g)=117 mg\text{Theoretical yield} = (5.00 \times 10^{-4}\text{ mol})(233.39\text{ g/mol})(1000\text{ mg/g}) = 117\text{ mg}. (b) Percent yield=105 mg116.7 mg×100%=90.0%\text{Percent yield} = \frac{105\text{ mg}}{116.7\text{ mg}} \times 100\% = 90.0\%. (c) Max achievable %=5.00×10−4−1.20×10−55.00×10−4×100%=97.6%\text{Max achievable \%} = \frac{5.00 \times 10^{-4} - 1.20 \times 10^{-5}}{5.00 \times 10^{-4}} \times 100\% = 97.6\%.

03

An organic synthesis yields 4.20 g4.20\text{ g} of aspirin (M=180.16 g/molM = 180.16\text{ g/mol}) starting from 3.50×10−2 mol3.50 \times 10^{-2}\text{ mol} of salicylic acid (1:11:1 stoichiometry). Due to recrystallization solvent retention, 0.45 g0.45\text{ g} remains dissolved in the mother liquor. Determine (a) the stoichiometric theoretical yield, (b) the actual percent yield isolated, and (c) the percentage of the theoretical yield lost to solubility.

Answer

(a) Theoretical yield=(0.0350 mol)(180.16 g/mol)=6.31 g\text{Theoretical yield} = (0.0350\text{ mol})(180.16\text{ g/mol}) = 6.31\text{ g}. (b) Percent yield=4.20 g6.306 g×100%=66.6%\text{Percent yield} = \frac{4.20\text{ g}}{6.306\text{ g}} \times 100\% = 66.6\%. (c) Loss percentage=0.45 g6.306 g×100%=7.14%\text{Loss percentage} = \frac{0.45\text{ g}}{6.306\text{ g}} \times 100\% = 7.14\%.

Loading workspace…