Resources

An uncharged ground-state atom of element XX has the electron configuration [Ne] 3s2 3p4[\text{Ne}]\,3s^2\,3p^4. (a) Identify the period and IUPAC group number of element XX on the periodic table, and (b) determine the total number of valence electrons present in this neutral atom.

Answer and steps

Final answer

(a) Period 33, Group 1616; (b) 66 valence electrons.

Steps

01

Determine the Period Number

The period number of a main-group element corresponds directly to the principal quantum number (nn) of its outermost (highest) occupied energy level.

  • In the given electron configuration [Ne] 3s2 3p4[\ce{Ne}]\,3s^2\,3p^4, the electrons occupy subshells up to n=3n = 3.
  • Therefore, element XX belongs to Period 33.

02

Determine the Number of Valence Electrons

Valence electrons are the electrons residing in the outermost electron shell (n=3n = 3):

  • The 3s3s subshell contains 22 electrons.
  • The 3p3p subshell contains 44 electrons.

Valence electrons=2+4=6\text{Valence electrons} = 2 + 4 = 6

Thus, an atom of element XX has 66 valence electrons.


03

Determine the IUPAC Group Number

Under standard IUPAC conventions, groups are numbered continuously from 11 to 1818 across the periodic table:

  • For a main-group element located in the pp-block (general valence shell configuration ns2 npxns^2\,np^x), the group number accounts for the two ss-block groups, the ten dd-block groups, and the pp-block electrons: Group number=10+number of valence electrons=10+(2+4)=16\text{Group number} = 10 + \text{number of valence electrons} = 10 + (2 + 4) = 16

Common Pitfall: Do not confuse the modern IUPAC group number (1616) with older alphanumeric designations (such as Group VIA or 6A). While the Roman numeral 66 directly matches the number of valence electrons, the IUPAC standard requires the addition of 1010 for all pp-block elements to account for the transition metal block (Groups 3–12).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to add 10 for p-block elements when determining the IUPAC group number and reports the group as Group 6.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Highest n=3, so Period 3\text{Highest } n = 3\text{, so Period } 3

  2. Step 2

    Group=2+4=6  ⟹  Period 3, Group 6\text{Group} = 2 + 4 = 6 \implies \text{Period } 3\text{, Group } 6

    Correct

    IUPAC Group =10+(2+4)=16\text{IUPAC Group } = 10 + (2 + 4) = 16

    You correctly summed the outer electrons (2+4=62 + 4 = 6), but modern IUPAC numbering spans columns 11 through 1818. For pp-block elements, you must add 1010 to account for the dd-block transition elements.

  3. Step 3

    Valence electrons=2+4=6\text{Valence electrons} = 2 + 4 = 6

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the highest principal quantum number (n=3n = 3) to find the period.

You correctly added the 3s3s and 3p3p electrons to find 66 valence electrons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
IUPAC Group Numbering for p-block Elements

You equated the number of valence electrons directly to the modern IUPAC group number.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing standard 1–18 IUPAC group numbering with the older American/CAS system (Group 6A) or omitting the 1010 columns of the transition metals (dd-block) when moving across the periodic table into the pp-block.

REASONING PATH
Your ACEpath teacher’s suggested approach
p-block IUPAC Group Rule
  • For main-group pp-block elements (ns2 npxns^2\,np^x), the IUPAC group number is given by 10+valence electrons10 + \text{valence electrons} (or 12+x12 + x).

  • Always add 1010 to the number of valence electrons when finding the 1–18 IUPAC group number for an element in the pp-block.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that element XX has valence configuration 3s2 3p43s^2\,3p^4, placing it in the pp-block.

  2. Apply the IUPAC group formula for pp-block elements: Group=10+valence electrons=10+6=16\text{Group} = 10 + \text{valence electrons} = 10 + 6 = 16.

Final answer

(a) Period 33, Group 1616; (b) 66 valence electrons

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting valence configurations in the pp-block directly to IUPAC groups 1313–1818.

  • Review the distinction between modern 1–18 IUPAC group designations and traditional A/B group designations.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the number of valence electrons with only the electrons in the outermost p subshell rather than the entire outermost shell.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Highest energy level n=3n = 3, so Period 33 ⟹\Longrightarrow IUPAC group=10+2+4=16\text{IUPAC group} = 10 + 2 + 4 = 16 ⟹\Longrightarrow Period 3, Group 16\text{Period } 3, \text{ Group } 16

  2. Step 2

    Outermost subshell is 3p4⟹Valence electrons=43p^4 \Longrightarrow \text{Valence electrons} = 4

    Correct

    Valence electrons=2 (3s)+4 (3p)=6\text{Valence electrons} = 2\,(3s) + 4\,(3p) = 6

    Valence electrons include all electrons in the highest occupied principal energy shell (n=3n = 3). You only counted the 44 electrons in the 3p3p subshell, omitting the 22 electrons in the 3s3s subshell.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the period from the highest occupied principal quantum number n=3n = 3.

You used the correct relationship between valence configuration and IUPAC group numbering for a pp-block element.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Valence shell vs. outermost subshell confusion

You identified only the outermost subshell (3p43p^4) rather than the entire outermost shell (n=3n = 3).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the term 'valence electrons' as referring only to the final subshell written in the electron configuration rather than the sum of all electrons sharing the highest principal quantum number (nn).

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the valence shell
  • For main-group elements, the valence shell consists of all subshells with the highest principal quantum number (nn).

  • Locate every subshell that shares the maximum value of nn (both nsns and npnp) and add their superscripts together.

Reconcile group number with valence count
  • For pp-block elements in Groups 1313–1818, the IUPAC group number equals 10+valence electrons10 + \text{valence electrons}.

  • Check that your valence electron count matches your group calculation: for Group 1616, valence electrons=16−10=6\text{valence electrons} = 16 - 10 = 6.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify all subshells belonging to the highest energy level (n=3n = 3): 3s23s^2 and 3p43p^4.

  2. Sum the electrons in these subshells: 2+4=62 + 4 = 6.

Final answer

(a) Period 33, Group 1616; (b) 66 valence electrons.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying the valence shell by circling all terms with the maximum nn value before summing the electrons.

  • Use your IUPAC group number as a built-in verification step for main-group valence counts.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the IUPAC group number using only the number of electrons in the p subshell instead of the total valence electrons plus ten.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Highest n=3, so Period 3\text{Highest } n = 3, \text{ so Period } 3

  2. Step 2

    p-block has 4 electrons, Group =10+4=14  ⟹  Period 3, Group 14p\text{-block has } 4 \text{ electrons, Group } = 10 + 4 = 14 \implies \text{Period } 3, \text{ Group } 14

    Correct

    Group =10+valence electrons=10+(2+4)=16 (or 12+4=16)\text{Group } = 10 + \text{valence electrons} = 10 + (2 + 4) = 16 \text{ (or } 12 + 4 = 16\text{)}

    You added 1010 directly to the number of pp-subshell electrons (44) instead of adding 1010 to the total number of valence electrons (2+4=62 + 4 = 6). For pp-block elements, the IUPAC group number is either 10+total valence electrons10 + \text{total valence electrons} or 12+number of p electrons12 + \text{number of } p \text{ electrons}, giving Group 1616.

  3. Step 3

    Valence electrons=2+4=6\text{Valence electrons} = 2 + 4 = 6

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the highest principal quantum number (n=3n = 3) defines the period.

You accurately calculated the total number of valence electrons as 2+4=62 + 4 = 6.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted s-electrons in p-block IUPAC group calculation

You added 1010 only to the 44 electrons in the 3p3p subshell instead of the total valence electrons.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the two ways to calculate IUPAC group numbers for the pp-block: you used 10+p-electrons10 + p\text{-electrons} instead of 10+valence electrons10 + \text{valence electrons} (or 12+p-electrons12 + p\text{-electrons}), forgetting to account for the two electrons in the ss-block (Groups 1 and 2).

REASONING PATH
Your ACEpath teacher’s suggested approach
p-Block IUPAC Group Rule
  • For main-group elements in the pp-block (ns2 npxns^2\,np^x), the IUPAC group number is Group=10+total valence electrons=10+(2+x)\text{Group} = 10 + \text{total valence electrons} = 10 + (2 + x) or Group=12+x\text{Group} = 12 + x.

  • Always include the two nsns electrons alongside the npnp electrons when adding 1010, or remember that the pp-block starts at Group 1313.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the valence configuration: 3s2 3p43s^2\,3p^4, which has 2+4=62 + 4 = 6 valence electrons.

  2. Apply the IUPAC pp-block group formula: Group=10+6=16\text{Group} = 10 + 6 = 16 (or 12+4=1612 + 4 = 16).

Final answer

(a) Period 33, Group 1616; (b) 66 valence electrons.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how the periodic table layout (2 ss-block columns + 10 dd-block columns + pp-block columns) determines modern IUPAC group numbers 1313 through 1818.

  • Practice determining the group number for elements across different pp-block columns (e.g., np1np^1 through np5np^5) to build the habit of including both nsns and npnp electrons.

Lock it in

Similar question

01

An uncharged ground-state atom of element YY has the electron configuration [Ne] 3s2 3p1[\ce{Ne}]\,3s^2\,3p^1. (a) Identify the period and IUPAC group number of element YY, and (b) determine the number of valence electrons.

Answer

(a) Period 33, Group 1313; (b) 33 valence electrons.

  • The highest principal quantum number is n=3n = 3, so it is in Period 33.
  • Valence electrons in shell n=3n=3: 2+1=32 + 1 = 3.
  • IUPAC group for pp-block: 10+3=1310 + 3 = 13.
02

An uncharged ground-state atom has the electron configuration [Ar] 4s2 3d10 4p5[\ce{Ar}]\,4s^2\,3d^{10}\,4p^5. (a) State the period and IUPAC group number, and (b) state the number of valence electrons.

Answer

(a) Period 44, Group 1717; (b) 77 valence electrons.

  • Highest occupied shell is n=4n = 4, so Period 44.
  • Valence electrons are in the outermost shell (4s2 4p54s^2\,4p^5): 2+5=72 + 5 = 7 valence electrons (the filled 3d103d^{10} is part of the core).
  • IUPAC group: 10+7=1710 + 7 = 17.
03

A neutral atom belongs to Period 22 and IUPAC Group 1414. Write its ground-state complete electron configuration and identify the total number of valence electrons.

Answer

Configuration: 1s2 2s2 2p21s^2\,2s^2\,2p^2 (or [He] 2s2 2p2[\ce{He}]\,2s^2\,2p^2); 44 valence electrons.

  • Period 22 means highest n=2n = 2.
  • Group 1414 indicates a pp-block element with valence electrons=14−10=4\text{valence electrons} = 14 - 10 = 4.
  • Shell n=2n=2 fills as 2s2 2p22s^2\,2p^2.
Loading workspace…