Resources
The normal boiling point of water is at (), with an enthalpy of vaporization . At the summit of Mount Whitney, atmospheric pressure drops to . Rather than calculating boiling temperature, determine the percentage reduction in the molar heat of vaporization that would be theoretically required for water to boil at this same summit temperature () under standard atmospheric pressure (), assuming the constant-pressure entropy of vaporization remains fixed at .
Answer and steps
Final answer
Steps
Relate Enthalpy, Entropy, and Boiling Temperature
At the normal boiling point, liquid and vapor phases are at dynamic equilibrium () at standard atmospheric pressure (). The relationship between enthalpy of vaporization (), entropy of vaporization (), and absolute boiling temperature () is:
Convert the Boiling Temperatures to Kelvin
- Original normal boiling temperature ():
- Target boiling temperature ():
Calculate the Required Molar Enthalpy of Vaporization
Assuming the entropy of vaporization remains constant at , the new heat of vaporization required to boil at is:
(Alternatively, because is held constant, is directly proportional to , meaning the fractional change in enthalpy equals the fractional change in absolute temperature).
Determine the Percentage Reduction
Calculate the reduction relative to the original molar heat of vaporization ():
(Common Pitfall: Using temperatures in Celsius rather than Kelvin when calculating percentage changes leads to an incorrect ratio, as thermodynamic phase equilibrium relations strictly depend on absolute temperature).
Typical errors
01 The student uses temperature in degrees Celsius rather than kelvins when calculating the required enthalpy of vaporization.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Thermodynamic equations require absolute temperature in kelvins. Substituting directly instead of produced an enthalpy value that was far too low.
- Step 3Correct
Your subtraction setup was correct, but the result was affected by the incorrect value of from Step 2.
- Step 4Correct
Your percentage formula was correct, but this final value inherited the calculation error from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly related enthalpy and entropy of vaporization through the boiling equilibrium equation .
You properly carried out the subtraction to find the enthalpy reduction and set up the percentage reduction formula.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the Celsius temperature directly in a thermodynamic calculation where absolute temperature in kelvins is required.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisThermodynamic state functions and equilibrium relationships derived from are defined strictly on the absolute Kelvin scale because entropy is measured per kelvin (). Multiplying Celsius by leaves mismatched units and drastically underestimates .
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit check on entropy
Entropy of phase transition is given in , which explicitly requires temperature to be in kelvins () for unit cancellation.
Always convert temperatures to kelvins () before multiplying by entropy or using thermodynamic formulas.
- Proportional scaling shortcut
When is constant, is directly proportional to absolute temperature: .
Calculate the ratio of absolute temperatures to see immediately that the reduction is about .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the target summit temperature to kelvins: .
Calculate the new required enthalpy of vaporization: .
Compute the enthalpy decrease: .
Compute the percentage reduction: .
02 The student divides the reduction by the new required enthalpy rather than the initial enthalpy when computing the percentage reduction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You divided by the new required value () instead of the original baseline value (). Percentage change must always be evaluated relative to the initial quantity.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the target boiling temperature to Kelvin.
You accurately calculated the new required enthalpy of vaporization using the constant entropy of vaporization.
You correctly found the absolute change in enthalpy of vaporization.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou divided the reduction by the final (new) value rather than the initial reference value when computing percentage reduction.
REASONING PATH
Your ACEpath teacher’s suggested approach- Baseline for Percentage Change
Always place the initial starting quantity in the denominator as the reference baseline.
CORRECTED PATH
ACEpath Teacher's Demonstration03 The student calculates the percentage remaining rather than the percentage reduction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You calculated the percentage of the original value that remains () instead of the percentage reduction, which requires the difference .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the boiling temperature from Celsius to Kelvin.
You accurately determined the required molar enthalpy of vaporization using the constant entropy of vaporization.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou took the ratio of the final value to the initial value without subtracting it from 100% (or subtracting the new value from the initial value in the numerator).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the fractional/percentage retention () with the relative fractional/percentage decrease ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Define Percentage Reduction
Always check whether the problem asks for the remaining amount or the amount of decrease before reporting your final percentage.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the change in enthalpy: .
Divide by the initial enthalpy: .
Lock it in
Why must temperature always be expressed in kelvins rather than degrees Celsius in the equation ?
Thermodynamic equilibrium is defined on the absolute temperature scale, and the units of are , requiring kelvins to cancel.
Similar question
Ethanol has a normal boiling point of and an enthalpy of vaporization . Assuming constant , what would need to be for ethanol to boil at ?
Answer
. Convert temperatures to kelvins: , . Since , .
A liquid has and a normal boiling point of . If a modified intermolecular structure lowers the required heat of vaporization by , what is the new boiling point in degrees Celsius, assuming is constant?
Answer
. Initial absolute temperature is . A decrease gives . Converting back: .
Benzene has a normal boiling point of and . Calculate its normal in , and explain the error that would occur if Celsius were used in place of Kelvin.
Answer
. . . Using yields , underestimating the required energy by over because the Celsius zero is arbitrarily set at water's freezing point rather than absolute zero.