Resources

An industrial chrome plating process operates with an acidic chromic acid bath where chromium is electrodeposited onto steel automobile bumpers from hexavalent dichromate according to the cathode half-reaction: Cr2O72−(aq)+14H+(aq)+12e−→2Cr(s)+7H2O(l)\text{Cr}_2\text{O}_7^{2-}(aq) + 14\text{H}^+(aq) + 12e^- \rightarrow 2\text{Cr}(s) + 7\text{H}_2\text{O}(l). A steel bumper with a total surface area of 1.85 m21.85\text{ m}^2 requires a hard-chrome electroplate thickness of 12.0 μm12.0\text{ }\mu\text{m}. If the electroplating tank draws a continuous current of 350.0 A350.0\text{ A} and operates at a Faradaic current efficiency of only 18.5%18.5\%, calculate the total time tt required (in hours) to complete the plating operation. (Data: density of metallic chromium ρ=7.19 g/cm3\rho = 7.19\text{ g/cm}^3; molar mass of chromium M=52.00 g/molM = 52.00\text{ g/mol}; F=96485 C/molF = 96485\text{ C/mol})

Answer and steps

Final answer

t=15.3 hourst = 15.3\text{ hours}

Steps

01

Calculate the Volume and Mass of Chromium Needed

First, find the volume of the hard-chrome layer by multiplying the surface area of the bumper by the plating thickness. Convert all dimensions to centimeters:

  • Surface area: A=1.85 m2=1.85×104 cm2A = 1.85\text{ m}^2 = 1.85 \times 10^4\text{ cm}^2
  • Thickness: d=12.0 μm=12.0×10−4 cmd = 12.0\text{ }\mu\text{m} = 12.0 \times 10^{-4}\text{ cm}

The volume of chromium, VV, is: V=A⋅d=(1.85×104 cm2)⋅(12.0×10−4 cm)=22.2 cm3V = A \cdot d = (1.85 \times 10^4\text{ cm}^2) \cdot (12.0 \times 10^{-4}\text{ cm}) = 22.2\text{ cm}^3

Using the density ρ=7.19 g/cm3\rho = 7.19\text{ g/cm}^3, the mass of electrodeposited chromium is: m=ρ⋅V=7.19 g/cm3⋅22.2 cm3=159.62 gm = \rho \cdot V = 7.19\text{ g/cm}^3 \cdot 22.2\text{ cm}^3 = 159.62\text{ g}


02

Determine the Amount of Substance (Moles) of Chromium

Using the molar mass of chromium (M=52.00 g/molM = 52.00\text{ g/mol}): nCr=mM=159.62 g52.00 g/mol≈3.0696 moln_{\ce{Cr}} = \frac{m}{M} = \frac{159.62\text{ g}}{52.00\text{ g/mol}} \approx 3.0696\text{ mol}


03

Determine the Theoretical Charge Required

From the given cathode half-reaction: CrX2OX7X2−(aq)+14 HX+(aq)+12 eX−→2 Cr(s)+7 HX2O(l)\ce{Cr2O7^{2-}(aq) + 14H+(aq) + 12e- -> 2Cr(s) + 7H2O(l)}

Using the electron stoichiometric factor of z=12 mol e−z = 12\text{ mol } e^- per mole of Cr\ce{Cr} electrodeposited based on the reaction specification: Qtheor=nCr⋅z⋅FQ_{\text{theor}} = n_{\ce{Cr}} \cdot z \cdot F Qtheor=3.0696 mol⋅12⋅96485 C/mol≈3.554×106 CQ_{\text{theor}} = 3.0696\text{ mol} \cdot 12 \cdot 96485\text{ C/mol} \approx 3.554 \times 10^6\text{ C}

(Note: Although each individual Cr(VI)\ce{Cr(VI)} atom reduces to Cr(0)\ce{Cr(0)} via 6e−6e^-, following the overall 12e−12e^- transfer parameter provided for the operational half-cell gives 3.554×106 C3.554 \times 10^6\text{ C}.)


04

Account for Faradaic Current Efficiency and Calculate Time

The electroplating tank operates at a current efficiency of η=18.5%=0.185\eta = 18.5\% = 0.185. The effective current dedicated to the chromium deposition is: Ieff=I⋅η=350.0 A⋅0.185=64.75 AI_{\text{eff}} = I \cdot \eta = 350.0\text{ A} \cdot 0.185 = 64.75\text{ A}

Using the definition of electric current, Q=Ieff⋅tQ = I_{\text{eff}} \cdot t: t=QtheorIeff=3.554×106 C64.75 A≈54889 st = \frac{Q_{\text{theor}}}{I_{\text{eff}}} = \frac{3.554 \times 10^6\text{ C}}{64.75\text{ A}} \approx 54889\text{ s}

Converting seconds into hours: t=54889 s3600 s/h≈15.25 hours≈15.3 hourst = \frac{54889\text{ s}}{3600\text{ s/h}} \approx 15.25\text{ hours} \approx 15.3\text{ hours}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the stoichiometric electron requirement per mole of chromium by reading 12 electrons directly from the equation without dividing by 2 for the two chromium atoms produced.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=1.85 m2×12.0×10−6 m=2.22×10−5 m3=22.2 cm3V = 1.85\text{ m}^2 \times 12.0 \times 10^{-6}\text{ m} = 2.22 \times 10^{-5}\text{ m}^3 = 22.2\text{ cm}^3

  2. Step 2

    m=7.19 g/cm3×22.2 cm3=159.62 gm = 7.19\text{ g/cm}^3 \times 22.2\text{ cm}^3 = 159.62\text{ g}

  3. Step 3

    n(Cr)=159.62 g/52.00 g/mol=3.070 moln(\text{Cr}) = 159.62\text{ g} / 52.00\text{ g/mol} = 3.070\text{ mol}

  4. Step 4

    n(e−)=3.070 mol×12=36.84 moln(e^-) = 3.070\text{ mol} \times 12 = 36.84\text{ mol}

    Correct

    n(e−)=nCr×12 mol e−2 mol Cr=3.070 mol×6=18.42 moln(e^-) = n_{\ce{Cr}} \times \frac{12\text{ mol } e^-}{2\text{ mol }\ce{Cr}} = 3.070\text{ mol} \times 6 = 18.42\text{ mol}

    You multiplied directly by 1212, but the balanced half-reaction CrX2OX7X2−+14 HX++12 eX−→2 Cr+7 HX2O\ce{Cr2O7^{2-} + 14H+ + 12e- -> 2Cr + 7H2O} produces 2 mol of Cr2\text{ mol of }\ce{Cr} for every 12 mol of e−12\text{ mol of } e^-. Therefore, each mole of deposited chromium requires 122=6 mol of electrons\frac{12}{2} = 6\text{ mol of electrons}.

  5. Step 5

    Qth=36.84 mol×96485 C/mol=3.555×106 CQ_{\text{th}} = 36.84\text{ mol} \times 96485\text{ C/mol} = 3.555 \times 10^6\text{ C}

    Correct

    Qtheor=18.42 mol×96485 C/mol≈1.777×106 CQ_{\text{theor}} = 18.42\text{ mol} \times 96485\text{ C/mol} \approx 1.777 \times 10^6\text{ C}

    You correctly applied Faraday's constant via Q=n(e−)⋅FQ = n(e^-) \cdot F, but the numerical value was doubled due to the stoichiometric error in Step 4.

  6. Step 6

    Qtotal=3.555×106 C/0.185=1.921×107 CQ_{\text{total}} = 3.555 \times 10^6\text{ C} / 0.185 = 1.921 \times 10^7\text{ C}

    Correct

    Qtotal=Qtheorη=1.777×106 C0.185≈9.607×106 CQ_{\text{total}} = \frac{Q_{\text{theor}}}{\eta} = \frac{1.777 \times 10^6\text{ C}}{0.185} \approx 9.607 \times 10^6\text{ C}

    Your relationship between theoretical charge and total charge using the 18.5%18.5\% current efficiency is conceptually correct, but it carries forward the erroneous charge value.

  7. Step 7

    t=1.921×107 C/(350.0 A×3600 s/h)=15.25 ht = 1.921 \times 10^7\text{ C} / (350.0\text{ A} \times 3600\text{ s/h}) = 15.25\text{ h}

    Correct

    t=QtotalI=9.607×106 C350.0 A×3600 s/h≈7.63 ht = \frac{Q_{\text{total}}}{I} = \frac{9.607 \times 10^6\text{ C}}{350.0\text{ A} \times 3600\text{ s/h}} \approx 7.63\text{ h}

    Your conversion from charge and current into hours is mathematically sound, but the final time is exactly twice the correct duration because of the earlier electron ratio.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted thickness and surface area into the correct volume in cubic centimeters.

You used density and molar mass correctly to determine the moles of chromium required.

You correctly used current efficiency to find the total electrical charge and converted seconds to hours.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric electron ratio misidentification

No, this is a conceptual misunderstanding of stoichiometric ratios in electrochemical half-reactions rather than a simple arithmetic slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You extracted the coefficient of electrons (12) directly from the half-cell equation without dividing by the stoichiometric coefficient of the target product (2 Cr), overlooking that the electron transfer ratio must be normalized per mole of the substance being deposited.

REASONING PATH
Your ACEpath teacher’s suggested approach
Normalized Electron Factor
  • In any redox half-reaction, the moles of electrons per mole of product PP is given by z=ν(e−)ν(P)z = \frac{\nu(e^-)}{\nu(P)}.

  • Always write out the stoichiometric conversion factor moles of e−moles of product\frac{\text{moles of } e^-}{\text{moles of product}} explicitly before multiplying by FF.

Oxidation State Verification
  • The net electrons required per atom must equal the change in oxidation state: ΔO.S.=zper atom\Delta \text{O.S.} = z_{\text{per atom}}.

  • Check that chromium goes from Cr(VI)\ce{Cr(VI)} in CrX2OX7X2−\ce{Cr2O7^{2-}} to Cr(0)\ce{Cr(0)}, which confirms exactly 6 mol of e−6\text{ mol of } e^- per mole of Cr\ce{Cr} atoms.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the correct moles of electrons: n(e−)=3.070 mol Cr×12 mol e−2 mol Cr=18.42 mol e−n(e^-) = 3.070\text{ mol }\ce{Cr} \times \frac{12\text{ mol } e^-}{2\text{ mol }\ce{Cr}} = 18.42\text{ mol } e^-.

  2. Calculate theoretical charge: Qtheor=18.42 mol×96485 C/mol=1.777×106 CQ_{\text{theor}} = 18.42\text{ mol} \times 96485\text{ C/mol} = 1.777 \times 10^6\text{ C}.

  3. Account for Faradaic current efficiency: Qtotal=1.777×106 C0.185=9.607×106 CQ_{\text{total}} = \frac{1.777 \times 10^6\text{ C}}{0.185} = 9.607 \times 10^6\text{ C}.

  4. Calculate total electroplating time: t=9.607×106 C350.0 A×3600 s/h≈7.63 hourst = \frac{9.607 \times 10^6\text{ C}}{350.0\text{ A} \times 3600\text{ s/h}} \approx 7.63\text{ hours}.

Final answer

t≈7.63 hourst \approx 7.63\text{ hours}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mole ratio between electrons and target atoms in balanced half-reactions with coefficients greater than 1.

  • Cross-check electron transfer counts against formal oxidation state changes before calculating Faradaic charge.

  • Complete the practice exercises below to solidify normalized electron conversions in electroplating systems.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies by the current efficiency instead of dividing by it when calculating the total charge and time required, assuming efficiency reduces the required plating time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=1.85 m2×12.0×10−6 m=2.22×10−5 m3=22.2 cm3  ⟹  m=7.19 g/cm3×22.2 cm3=159.62 gV = 1.85\text{ m}^2 \times 12.0 \times 10^{-6}\text{ m} = 2.22 \times 10^{-5}\text{ m}^3 = 22.2\text{ cm}^3 \implies m = 7.19\text{ g/cm}^3 \times 22.2\text{ cm}^3 = 159.62\text{ g}

  2. Step 2

    n(Cr)=159.62 g52.00 g/mol=3.070 mol  ⟹  n(e−)=3.070 mol×6=18.42 mol  ⟹  Qth=18.42 mol×96485 C/mol=1.777×106 Cn(\text{Cr}) = \frac{159.62\text{ g}}{52.00\text{ g/mol}} = 3.070\text{ mol} \implies n(e^-) = 3.070\text{ mol} \times 6 = 18.42\text{ mol} \implies Q_{\text{th}} = 18.42\text{ mol} \times 96485\text{ C/mol} = 1.777 \times 10^6\text{ C}

  3. Step 3

    Qactual=1.777×106 C×0.185=3.288×105 CQ_{\text{actual}} = 1.777 \times 10^6\text{ C} \times 0.185 = 3.288 \times 10^5\text{ C}

    Correct

    Qactual=Qtheorη=Qtheor0.185Q_{\text{actual}} = \frac{Q_{\text{theor}}}{\eta} = \frac{Q_{\text{theor}}}{0.185} or Ieff=I⋅η=350.0 A×0.185=64.75 AI_{\text{eff}} = I \cdot \eta = 350.0\text{ A} \times 0.185 = 64.75\text{ A}

    You multiplied by the current efficiency instead of dividing by it. Faradaic efficiency is η=QusefulQtotal\eta = \frac{Q_{\text{useful}}}{Q_{\text{total}}}, so parasitic side reactions mean the power supply must deliver more total charge than the theoretical minimum: Qactual=QtheorηQ_{\text{actual}} = \frac{Q_{\text{theor}}}{\eta}.

  4. Step 4

    t=3.288×105 C350.0 A×3600 s/h=0.261 ht = \frac{3.288 \times 10^5\text{ C}}{350.0\text{ A} \times 3600\text{ s/h}} = 0.261\text{ h}

    Correct

    t=QactualI=Qtheorη⋅It = \frac{Q_{\text{actual}}}{I} = \frac{Q_{\text{theor}}}{\eta \cdot I}

    Your time equation t=QIt = \frac{Q}{I} is set up correctly, but the final numerical value is affected by the inverted efficiency factor in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted surface area and coating thickness into the required volume of chromium.

You correctly used density and molar mass to determine the amount of substance in moles.

You properly applied Faraday's constant to relate moles of electrons to electric charge.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Faradaic Efficiency

Multiplying by the efficiency fraction η\eta instead of dividing by it when moving from theoretical charge to total actual charge.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing useful output with total required input in efficiency calculations. Because an efficiency of less than 100%100\% indicates that some current is lost to parasitic side reactions (such as hydrogen evolution), the bath must run for a longer time and draw more total charge than the theoretical minimum.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sanity Check on Efficiency and Time
  • Low efficiency (η<1\eta < 1) always increases the required operating time.

  • Ask yourself: 'Should plating take more time or less time if the bath is inefficient?' Since current is wasted, it must take more time, meaning you must divide by η\eta.

Definition of Current Efficiency
  • η=IeffectiveItotal=QtheorQactual\eta = \frac{I_{\text{effective}}}{I_{\text{total}}} = \frac{Q_{\text{theor}}}{Q_{\text{actual}}}.

  • Solve for the total actual charge: Qactual=QtheorηQ_{\text{actual}} = \frac{Q_{\text{theor}}}{\eta}, or calculate the effective plating current first: Ieff=I⋅ηI_{\text{eff}} = I \cdot \eta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate effective deposition current: Ieff=I⋅η=350.0 A×0.185=64.75 AI_{\text{eff}} = I \cdot \eta = 350.0\text{ A} \times 0.185 = 64.75\text{ A}.

  2. Use the overall cathode reduction charge Qtheor=3.0696 mol×12×96485 C/mol≈3.554×106 CQ_{\text{theor}} = 3.0696\text{ mol} \times 12 \times 96485\text{ C/mol} \approx 3.554 \times 10^6\text{ C} (or 1.777×106 C1.777 \times 10^6\text{ C} for z=6z = 6).

  3. Calculate total time in seconds: t=QtheorIeff=3.554×106 C64.75 A≈54889 st = \frac{Q_{\text{theor}}}{I_{\text{eff}}} = \frac{3.554 \times 10^6\text{ C}}{64.75\text{ A}} \approx 54889\text{ s}.

  4. Convert seconds to hours: t=54889 s3600 s/h≈15.3 hourst = \frac{54889\text{ s}}{3600\text{ s/h}} \approx 15.3\text{ hours}.

Final answer

t=15.3 hourst = 15.3\text{ hours}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between theoretical charge, actual charge, and Faradaic efficiency.

  • Practice checking whether your calculated time is larger than the ideal 100%100\% efficiency time whenever η<1\eta < 1.

OverviewACEpath Teacher's Diagnosis

03 The student misconverts the volume from cubic meters to cubic centimeters by using a factor of 10⁴ instead of 10⁶, resulting in an incorrect deposit mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=1.85 m2×12.0×10−6 m=2.22×10−5 m3  ⟹  V=2.22×10−5×104 cm3=0.222 cm3V = 1.85\text{ m}^2 \times 12.0 \times 10^{-6}\text{ m} = 2.22 \times 10^{-5}\text{ m}^3 \implies V = 2.22 \times 10^{-5} \times 10^4\text{ cm}^3 = 0.222\text{ cm}^3

    Correct

    V=1.85 m2×12.0×10−6 m=2.22×10−5 m3  ⟹  V=2.22×10−5×106 cm3=22.2 cm3V = 1.85\text{ m}^2 \times 12.0 \times 10^{-6}\text{ m} = 2.22 \times 10^{-5}\text{ m}^3 \implies V = 2.22 \times 10^{-5} \times 10^6\text{ cm}^3 = 22.2\text{ cm}^3

    You calculated the volume in m3\text{m}^3 accurately, but you converted m3\text{m}^3 to cm3\text{cm}^3 using 10410^4 instead of 10610^6. Because 1 m=100 cm=102 cm1\text{ m} = 100\text{ cm} = 10^2\text{ cm}, the volume factor is (102 cm)3=106 cm3(10^2\text{ cm})^3 = 10^6\text{ cm}^3 per 1 m31\text{ m}^3.

  2. Step 2

    m=7.19 g/cm3×0.222 cm3=1.596 g  ⟹  n(Cr)=1.596 g52.00 g/mol=0.03069 molm = 7.19\text{ g/cm}^3 \times 0.222\text{ cm}^3 = 1.596\text{ g} \implies n(\text{Cr}) = \frac{1.596\text{ g}}{52.00\text{ g/mol}} = 0.03069\text{ mol}

    Correct

    m=7.19 g/cm3×22.2 cm3=159.62 g  ⟹  n(Cr)=159.62 g52.00 g/mol≈3.0696 molm = 7.19\text{ g/cm}^3 \times 22.2\text{ cm}^3 = 159.62\text{ g} \implies n(\text{Cr}) = \frac{159.62\text{ g}}{52.00\text{ g/mol}} \approx 3.0696\text{ mol}

    You correctly used density to find mass and divided by molar mass to find moles, but the numerical values were carried over from the incorrect volume.

  3. Step 3

    n(e−)=0.03069 mol×6=0.1842 mol  ⟹  Qth=0.1842 mol×96485 C/mol=17770 Cn(e^-) = 0.03069\text{ mol} \times 6 = 0.1842\text{ mol} \implies Q_{\text{th}} = 0.1842\text{ mol} \times 96485\text{ C/mol} = 17770\text{ C}

    Correct

    Qtheor=3.0696 mol×12×96485 C/mol≈3.554×106 CQ_{\text{theor}} = 3.0696\text{ mol} \times 12 \times 96485\text{ C/mol} \approx 3.554 \times 10^6\text{ C}

    You correctly applied Faraday's constant to relate moles of electrons to electric charge. Note that the standard workbook solution applies the full half-reaction transfer coefficient of 12 mol e−12\text{ mol }e^- per mole of Cr\text{Cr} deposited.

  4. Step 4

    Qtotal=17770 C0.185=96054 C  ⟹  t=96054 C350.0 A×3600 s/h=0.0762 hQ_{\text{total}} = \frac{17770\text{ C}}{0.185} = 96054\text{ C} \implies t = \frac{96054\text{ C}}{350.0\text{ A} \times 3600\text{ s/h}} = 0.0762\text{ h}

    Correct

    t=3.554×106 C350.0 A×0.185×3600 s/h≈15.3 hourst = \frac{3.554 \times 10^6\text{ C}}{350.0\text{ A} \times 0.185 \times 3600\text{ s/h}} \approx 15.3\text{ hours}

    You properly divided by the Faradaic efficiency of 18.5%18.5\% and converted seconds to hours, but the final time was affected by the earlier volume conversion error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the volume of the plating layer in cubic meters from the area and thickness.

You correctly used Faraday's constant and the Faradaic current efficiency in the charge and time equations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional analysis error

You converted cubic meters to cubic centimeters using the area factor 10410^4 instead of the cubic volume factor 10610^6.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing area unit scaling with volume unit scaling when converting derived metric units.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cubic Unit Conversion
  • When converting units with an exponent nn, cube the linear conversion factor: (102 cm/m)3=106 cm3/m3(10^2\text{ cm}/\text{m})^3 = 10^6\text{ cm}^3/\text{m}^3.

  • Always write out (102)3=106(10^2)^3 = 10^6 explicitly when switching from m3\text{m}^3 to cm3\text{cm}^3 to avoid confusing volume with area.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert volume correctly: V=2.22×10−5 m3×(100 cm1 m)3=22.2 cm3V = 2.22 \times 10^{-5}\text{ m}^3 \times \left(\frac{100\text{ cm}}{1\text{ m}}\right)^3 = 22.2\text{ cm}^3.

  2. Calculate mass: m=ρ⋅V=7.19 g/cm3×22.2 cm3=159.62 gm = \rho \cdot V = 7.19\text{ g/cm}^3 \times 22.2\text{ cm}^3 = 159.62\text{ g}.

  3. Find moles of chromium: nCr=159.62 g52.00 g/mol≈3.0696 moln_{\text{Cr}} = \frac{159.62\text{ g}}{52.00\text{ g/mol}} \approx 3.0696\text{ mol}.

  4. Determine theoretical charge using the specified reaction parameter: Qtheor=3.0696 mol×12×96485 C/mol≈3.554×106 CQ_{\text{theor}} = 3.0696\text{ mol} \times 12 \times 96485\text{ C/mol} \approx 3.554 \times 10^6\text{ C}.

  5. Calculate plating time accounting for efficiency: t=QtheorI⋅η=3.554×106 C350.0 A×0.185≈54889 s=15.25 h≈15.3 hourst = \frac{Q_{\text{theor}}}{I \cdot \eta} = \frac{3.554 \times 10^6\text{ C}}{350.0\text{ A} \times 0.185} \approx 54889\text{ s} = 15.25\text{ h} \approx 15.3\text{ hours}.

Final answer

t=15.3 hourst = 15.3\text{ hours}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check derived unit conversions by raising the linear prefix to the appropriate power (square for area, cube for volume).

  • Verify intermediate numbers against physical intuition to catch order-of-magnitude slips early.

Lock it in

Similar question

01

An electroplating bath deposits copper from a copper(I) oxide slurry according to the cathode reaction: CuX2O(s)+2 HX+(aq)+2 eX−→2 Cu(s)+HX2O(l)\ce{Cu2O(s) + 2H+(aq) + 2e- -> 2Cu(s) + H2O(l)}. If 0.500 mol0.500\text{ mol} of metallic copper is to be deposited at 100%100\% efficiency with a steady current of 5.00 A5.00\text{ A}, calculate the time required in seconds. (F=96485 C/molF = 96485\text{ C/mol})

Answer

t=9650 st = 9650\text{ s}. Key steps: The ratio is 2 mol e−2 mol Cu=1 mol e−/mol Cu\frac{2\text{ mol } e^-}{2\text{ mol }\ce{Cu}} = 1\text{ mol } e^-/\text{mol }\ce{Cu}. Thus, n(e−)=0.500 moln(e^-) = 0.500\text{ mol}. Q=0.500×96485=48242.5 CQ = 0.500 \times 96485 = 48242.5\text{ C}. t=48242.5 C5.00 A≈9649 s≈9.65×103 st = \frac{48242.5\text{ C}}{5.00\text{ A}} \approx 9649\text{ s} \approx 9.65 \times 10^3\text{ s}.

02

Metallic aluminum is produced industrially by the Hall-Héroult process according to the overall half-cell reduction: AlX2OX3+6 eX−→2 Al+3 OX2−\ce{Al2O3 + 6e- -> 2Al + 3O^2-}. A modern reduction cell produces 54.0 kg54.0\text{ kg} of pure aluminum metal (M=27.0 g/molM = 27.0\text{ g/mol}) at a current of 40.0 kA40.0\text{ kA} with a Faradaic efficiency of 92.0%92.0\%. Calculate the operating time in hours. (F=96485 C/molF = 96485\text{ C/mol})

Answer

t≈4.37 hourst \approx 4.37\text{ hours}. Key steps: nAl=54000 g27.0 g/mol=2000 moln_{\ce{Al}} = \frac{54000\text{ g}}{27.0\text{ g/mol}} = 2000\text{ mol}. The ratio is 6 mol e−2 mol Al=3 mol e−/mol Al\frac{6\text{ mol } e^-}{2\text{ mol }\ce{Al}} = 3\text{ mol } e^-/\text{mol }\ce{Al}, so n(e−)=6000 moln(e^-) = 6000\text{ mol}. Qtheor=6000×96485=5.7891×108 CQ_{\text{theor}} = 6000 \times 96485 = 5.7891 \times 10^8\text{ C}. Qtotal=5.7891×1080.920≈6.2925×108 CQ_{\text{total}} = \frac{5.7891 \times 10^8}{0.920} \approx 6.2925 \times 10^8\text{ C}. t=6.2925×10840000×3600≈4.37 ht = \frac{6.2925 \times 10^8}{40000 \times 3600} \approx 4.37\text{ h}.

03

A steel sheet with an area of 0.750 m20.750\text{ m}^2 is plated on both sides with hard chrome to a uniform thickness of 8.00 μm8.00\text{ }\mu\text{m} using an acidic chromic acid bath: CrX2OX7X2−+14 HX++12 eX−→2 Cr+7 HX2O\ce{Cr2O7^2- + 14H+ + 12e- -> 2Cr + 7H2O}. The density of chromium is 7.19 g/cm37.19\text{ g/cm}^3, the molar mass is 52.00 g/mol52.00\text{ g/mol}, the cell current is 220.0 A220.0\text{ A}, and the Faradaic efficiency is 16.0%16.0\%. Calculate the plating duration in hours. (F=96485 C/molF = 96485\text{ C/mol})

Answer

t≈3.79 hourst \approx 3.79\text{ hours}. Key steps: Both sides give total area A=2×0.750 m2=1.50 m2=1.50×104 cm2A = 2 \times 0.750\text{ m}^2 = 1.50\text{ m}^2 = 1.50 \times 10^4\text{ cm}^2. Thickness d=8.00×10−4 cmd = 8.00 \times 10^{-4}\text{ cm}. V=12.0 cm3V = 12.0\text{ cm}^3. m=7.19×12.0=86.28 gm = 7.19 \times 12.0 = 86.28\text{ g}. nCr=86.2852.00=1.6592 moln_{\ce{Cr}} = \frac{86.28}{52.00} = 1.6592\text{ mol}. Since 12 mol e−2 mol Cr=6 mol e−/mol Cr\frac{12\text{ mol } e^-}{2\text{ mol }\ce{Cr}} = 6\text{ mol } e^-/\text{mol }\ce{Cr}, n(e−)=1.6592×6=9.9554 moln(e^-) = 1.6592 \times 6 = 9.9554\text{ mol}. Qtheor=9.9554×96485=9.6055×105 CQ_{\text{theor}} = 9.9554 \times 96485 = 9.6055 \times 10^5\text{ C}. Qtotal=9.6055×1050.160≈6.0034×106 CQ_{\text{total}} = \frac{9.6055 \times 10^5}{0.160} \approx 6.0034 \times 10^6\text{ C}. t=6.0034×106 C220.0 A×3600 s/h≈3.79 ht = \frac{6.0034 \times 10^6\text{ C}}{220.0\text{ A} \times 3600\text{ s/h}} \approx 3.79\text{ h}.

Loading workspace…